! Started logfile: J1617-1941_S_2004_05_27_yyk_uvs.log on Wed Dec 7 00:36:17 2005 obs J1617-1941_S_2004_05_27_yyk_uve.fits ! Reading UV FITS file: J1617-1941_S_2004_05_27_yyk_uve.fits ! AN table 1: 7 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.68254 visibilities/baseline/integration-bin. ! Found source: J1617-1941 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1392 lines of history. ! ! Reading 860 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1617-1941_S_2004_05_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.156174 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.895852Jy sigma=12.401554 ! Fit after self-cal, rms=0.884469Jy sigma=12.264939 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.952 mas, bmaj=6.945 mas, bpa=4.035 degrees ! Estimated noise=3.03311 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.102409 Jy ! Component: 100 - total flux cleaned = 0.125549 Jy ! Total flux subtracted in 100 components = 0.125549 Jy ! Clean residual min=-0.015010 max=0.014236 Jy/beam ! Clean residual mean=-0.000022 rms=0.003876 Jy/beam ! Combined flux in latest and established models = 0.125549 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.125549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096809Jy sigma=1.103677 ! Fit after self-cal, rms=0.097235Jy sigma=1.100148 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.649 mas, bmaj=9.415 mas, bpa=4.668 degrees ! Estimated noise=1.8467 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0185619 Jy ! Component: 100 - total flux cleaned = 0.0246787 Jy ! Component: 150 - total flux cleaned = 0.0270544 Jy ! Component: 200 - total flux cleaned = 0.027327 Jy ! Total flux subtracted in 200 components = 0.027327 Jy ! Clean residual min=-0.008791 max=0.007125 Jy/beam ! Clean residual mean=-0.000106 rms=0.002168 Jy/beam ! Combined flux in latest and established models = 0.152876 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 60 components and 0.152876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096440Jy sigma=1.060664 ! Fit after self-cal, rms=0.096399Jy sigma=1.060094 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.096399Jy sigma=1.060094 ! Fit after self-cal, rms=0.096399Jy sigma=1.060094 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096399Jy sigma=1.060094 ! Fit after self-cal, rms=0.096393Jy sigma=1.059943 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.649 mas, bmaj=9.415 mas, bpa=4.668 degrees ! Estimated noise=1.8467 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000564155 Jy ! Component: 100 - total flux cleaned = 0.000500419 Jy ! Component: 150 - total flux cleaned = 0.000498206 Jy ! Component: 200 - total flux cleaned = 0.00053751 Jy ! Total flux subtracted in 200 components = 0.00053751 Jy ! Clean residual min=-0.008677 max=0.007240 Jy/beam ! Clean residual mean=-0.000104 rms=0.002141 Jy/beam ! Combined flux in latest and established models = 0.153414 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 67 components and 0.153414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096442Jy sigma=1.059187 ! Fit after self-cal, rms=0.096364Jy sigma=1.059021 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096364Jy sigma=1.059021 ! Fit after self-cal, rms=0.091014Jy sigma=0.988343 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00230056 Jy ! Component: 100 - total flux cleaned = 0.00241807 Jy ! Component: 150 - total flux cleaned = 0.00237482 Jy ! Component: 200 - total flux cleaned = 0.00237431 Jy ! Total flux subtracted in 200 components = 0.00237431 Jy ! Clean residual min=-0.008070 max=0.007270 Jy/beam ! Clean residual mean=-0.000065 rms=0.001970 Jy/beam ! Combined flux in latest and established models = 0.155788 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 73 components and 0.155788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091057Jy sigma=0.986933 ! Fit after self-cal, rms=0.090816Jy sigma=0.982606 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.649 x 9.415 at 4.668 degrees (North through East) ! Clean map min=-0.0078328 max=0.12776 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090816Jy sigma=0.982606 ! Fit after self-cal, rms=0.090816Jy sigma=0.982606 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090816Jy sigma=0.982606 ! Fit after self-cal, rms=0.090844Jy sigma=0.982244 ! Inverting map and beam ! Estimated beam: bmin=3.649 mas, bmaj=9.415 mas, bpa=4.668 degrees ! Estimated noise=1.8467 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000206113 Jy ! Component: 100 - total flux cleaned = 0.000209081 Jy ! Component: 150 - total flux cleaned = 0.000247273 Jy ! Component: 200 - total flux cleaned = 0.000212066 Jy ! Total flux subtracted in 200 components = 0.000212066 Jy ! Clean residual min=-0.007969 max=0.007224 Jy/beam ! Clean residual mean=-0.000064 rms=0.001961 Jy/beam ! Combined flux in latest and established models = 0.156 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 76 components and 0.156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090844Jy sigma=0.981808 ! Fit after self-cal, rms=0.090834Jy sigma=0.981732 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090834Jy sigma=0.981732 ! Fit after self-cal, rms=0.090834Jy sigma=0.981732 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090834Jy sigma=0.981732 ! Fit after self-cal, rms=0.090841Jy sigma=0.981723 ! Inverting map and beam ! Estimated beam: bmin=3.649 mas, bmaj=9.415 mas, bpa=4.668 degrees ! Estimated noise=1.8467 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -5.87217e-06 Jy ! Component: 100 - total flux cleaned = 3.04401e-05 Jy ! Component: 150 - total flux cleaned = 6.25945e-05 Jy ! Component: 200 - total flux cleaned = 3.38225e-05 Jy ! Total flux subtracted in 200 components = 3.38225e-05 Jy ! Clean residual min=-0.007974 max=0.007201 Jy/beam ! Clean residual mean=-0.000063 rms=0.001957 Jy/beam ! Combined flux in latest and established models = 0.156034 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 81 components and 0.156034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090841Jy sigma=0.981421 ! Fit after self-cal, rms=0.090825Jy sigma=0.981394 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.74 mas, bmaj=16.8 mas, bpa=-2.76 degrees ! Estimated noise=2.26356 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00198587 Jy ! Component: 100 - total flux cleaned = 0.00216827 Jy ! Component: 150 - total flux cleaned = 0.00237925 Jy ! Component: 200 - total flux cleaned = 0.00252041 Jy ! Total flux subtracted in 200 components = 0.00252041 Jy ! Clean residual min=-0.007971 max=0.007663 Jy/beam ! Clean residual mean=-0.000105 rms=0.002369 Jy/beam ! Combined flux in latest and established models = 0.158554 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 84 components and 0.158554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090837Jy sigma=0.981717 ! Fit after self-cal, rms=0.090876Jy sigma=0.981393 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.952 mas, bmaj=6.945 mas, bpa=4.035 degrees ! Estimated noise=3.03311 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.105491 Jy ! Component: 100 - total flux cleaned = 0.12905 Jy ! Component: 150 - total flux cleaned = 0.139033 Jy ! Component: 200 - total flux cleaned = 0.143633 Jy ! Total flux subtracted in 200 components = 0.143633 Jy ! Clean residual min=-0.013054 max=0.011142 Jy/beam ! Clean residual mean=-0.000041 rms=0.003379 Jy/beam ! Combined flux in latest and established models = 0.143633 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.143633 Jy ! Inverting map and beam ! Estimated beam: bmin=3.649 mas, bmaj=9.415 mas, bpa=4.668 degrees ! Estimated noise=1.8467 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100578 Jy ! Component: 100 - total flux cleaned = 0.0128225 Jy ! Component: 150 - total flux cleaned = 0.0129096 Jy ! Component: 200 - total flux cleaned = 0.0128329 Jy ! Total flux subtracted in 200 components = 0.0128329 Jy ! Clean residual min=-0.008030 max=0.006983 Jy/beam ! Clean residual mean=-0.000061 rms=0.001972 Jy/beam ! Combined flux in latest and established models = 0.156466 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 51 components and 0.156466 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.74 mas, bmaj=16.8 mas, bpa=-2.76 degrees ! Estimated noise=2.26356 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193914 Jy ! Component: 100 - total flux cleaned = 0.00203835 Jy ! Component: 150 - total flux cleaned = 0.00217802 Jy ! Component: 200 - total flux cleaned = 0.00230341 Jy ! Total flux subtracted in 200 components = 0.00230341 Jy ! Clean residual min=-0.008044 max=0.007498 Jy/beam ! Clean residual mean=-0.000102 rms=0.002340 Jy/beam ! Combined flux in latest and established models = 0.158769 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 57 components and 0.158769 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.649 mas, bmaj=9.415 mas, bpa=4.668 degrees ! Estimated noise=1.8467 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102893 Jy ! Component: 100 - total flux cleaned = -0.00137386 Jy ! Component: 150 - total flux cleaned = -0.00155538 Jy ! Component: 200 - total flux cleaned = -0.00166081 Jy ! Total flux subtracted in 200 components = -0.00166081 Jy ! Clean residual min=-0.008001 max=0.007185 Jy/beam ! Clean residual mean=-0.000059 rms=0.001940 Jy/beam ! Combined flux in latest and established models = 0.157108 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 61 components and 0.157108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090550Jy sigma=0.982169 ! Fit after self-cal, rms=0.090550Jy sigma=0.981801 wmodel J1617-1941_S_2004_05_27_yyk\_map.mod ! Writing 61 model components to file: J1617-1941_S_2004_05_27_yyk_map.mod wobs J1617-1941_S_2004_05_27_yyk\_uvs.fits ! Writing UV FITS file: J1617-1941_S_2004_05_27_yyk_uvs.fits wwins J1617-1941_S_2004_05_27_yyk\_map.win ! wwins: Wrote 1 windows to J1617-1941_S_2004_05_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00116642 Jy ! Component: 100 - total flux cleaned = -0.00164293 Jy ! Component: 150 - total flux cleaned = -0.000603941 Jy ! Component: 200 - total flux cleaned = 0.00028561 Jy ! Component: 250 - total flux cleaned = 0.000854419 Jy ! Component: 300 - total flux cleaned = 0.00130988 Jy ! Component: 350 - total flux cleaned = 0.00174986 Jy ! Component: 400 - total flux cleaned = 0.00234706 Jy ! Component: 450 - total flux cleaned = 0.00243182 Jy ! Component: 500 - total flux cleaned = 0.00266969 Jy ! Component: 550 - total flux cleaned = 0.00251076 Jy ! Component: 600 - total flux cleaned = 0.00243316 Jy ! Component: 650 - total flux cleaned = 0.00235764 Jy ! Component: 700 - total flux cleaned = 0.00228567 Jy ! Component: 750 - total flux cleaned = 0.0022861 Jy ! Component: 800 - total flux cleaned = 0.00235631 Jy ! Component: 850 - total flux cleaned = 0.0024916 Jy ! Component: 900 - total flux cleaned = 0.00262262 Jy ! Component: 950 - total flux cleaned = 0.00281569 Jy ! Component: 1000 - total flux cleaned = 0.00300445 Jy ! Component: 1050 - total flux cleaned = 0.00325212 Jy ! Component: 1100 - total flux cleaned = 0.00349558 Jy ! Component: 1150 - total flux cleaned = 0.00391424 Jy ! Component: 1200 - total flux cleaned = 0.00420857 Jy ! Component: 1250 - total flux cleaned = 0.00461425 Jy ! Component: 1300 - total flux cleaned = 0.00489936 Jy ! Component: 1350 - total flux cleaned = 0.00523653 Jy ! Component: 1400 - total flux cleaned = 0.0055136 Jy ! Component: 1450 - total flux cleaned = 0.0058423 Jy ! Component: 1500 - total flux cleaned = 0.00627291 Jy ! Component: 1550 - total flux cleaned = 0.00664376 Jy ! Component: 1600 - total flux cleaned = 0.00690525 Jy ! Component: 1650 - total flux cleaned = 0.00731928 Jy ! Component: 1700 - total flux cleaned = 0.00767793 Jy ! Component: 1750 - total flux cleaned = 0.00828556 Jy ! Component: 1800 - total flux cleaned = 0.00873621 Jy ! Component: 1850 - total flux cleaned = 0.0091827 Jy ! Component: 1900 - total flux cleaned = 0.0098207 Jy ! Component: 1950 - total flux cleaned = 0.0102575 Jy ! Component: 2000 - total flux cleaned = 0.0108339 Jy ! Total flux subtracted in 2048 components = 0.0113572 Jy ! Clean residual min=-0.003211 max=0.002663 Jy/beam ! Clean residual mean=0.000014 rms=0.000952 Jy/beam ! Combined flux in latest and established models = 0.168466 Jy keep ! Adding 109 model components to the UV plane model. ! The established model now contains 170 components and 0.168465 Jy ![Exited script file: muppet] wmap "J1617-1941_S_2004_05_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.649 x 9.415 at 4.668 degrees (North through East) ! Clean map min=-0.0059776 max=0.12609 Jy/beam ! Writing clean map to FITS file: J1617-1941_S_2004_05_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.126088 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000928478 device "J1617-1941_S_2004_05_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J1617-1941_S_2004_05_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.20913 2.20913 4.41826 8.83651 17.673 35.346 70.6921 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0027 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.126 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.649 x 9.415 at 4.668 degrees (North through East) ! Clean map min=-0.0059776 max=0.12609 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1617-1941_S_2004_05_27_yyk\_map.gif/gif" ! Attempting to open device: 'J1617-1941_S_2004_05_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1617-1941_S_2004_05_27_yyk_uvs.log closed on Wed Dec 7 00:36:20 2005