! Started logfile: J1603-1007_X_2004_05_27_yyk_uvs.log on Wed Dec 7 00:36:03 2005 obs J1603-1007_X_2004_05_27_yyk_uve.fits ! Reading UV FITS file: J1603-1007_X_2004_05_27_yyk_uve.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.961111 visibilities/baseline/integration-bin. ! Found source: J1603-1007 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1378 lines of history. ! ! Reading 2768 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1603-1007_X_2004_05_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.167083 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.850484Jy sigma=16.216582 ! Fit after self-cal, rms=0.850474Jy sigma=16.215085 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6859 mas, bmaj=1.813 mas, bpa=-1.652 degrees ! Estimated noise=1.02659 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.131214 Jy ! Component: 100 - total flux cleaned = 0.149668 Jy ! Total flux subtracted in 100 components = 0.149668 Jy ! Clean residual min=-0.004581 max=0.006343 Jy/beam ! Clean residual mean=0.000009 rms=0.001338 Jy/beam ! Combined flux in latest and established models = 0.149668 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.149668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068640Jy sigma=1.076126 ! Fit after self-cal, rms=0.068627Jy sigma=1.075929 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8495 mas, bmaj=2.136 mas, bpa=0.544 degrees ! Estimated noise=0.703114 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, 2.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.010691 Jy ! Component: 100 - total flux cleaned = 0.016078 Jy ! Component: 150 - total flux cleaned = 0.0183013 Jy ! Component: 200 - total flux cleaned = 0.0193068 Jy ! Total flux subtracted in 200 components = 0.0193068 Jy ! Clean residual min=-0.003203 max=0.003843 Jy/beam ! Clean residual mean=-0.000005 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 0.168974 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 43 model components to the UV plane model. ! The established model now contains 50 components and 0.168974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067600Jy sigma=1.047711 ! Fit after self-cal, rms=0.067538Jy sigma=1.046576 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00551 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 1.02 KP 1.01 ! LA 1.01 MK 1.04 NL 1.00 OV 0.98 ! PT 0.95 SC 1.01 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00767 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 1.01 KP 0.92 ! LA 0.98 MK 1.00 NL 0.96 OV 1.01 ! PT 1.03 SC 0.95 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.0033 ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.04 HN 0.89 KP 0.92 ! LA 0.95 MK 1.02 NL 1.02 OV 1.01 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.972797 ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.04 HN 1.03 KP 0.90 ! LA 0.99 MK 1.07 NL 0.99 OV 1.04 ! PT 1.08 SC 1.06 ! ! ! Fit before self-cal, rms=0.067538Jy sigma=1.046576 ! Fit after self-cal, rms=0.067168Jy sigma=1.032562 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067168Jy sigma=1.032562 ! Fit after self-cal, rms=0.067166Jy sigma=1.032482 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8603 mas, bmaj=2.165 mas, bpa=0.87 degrees ! Estimated noise=0.69942 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -6.07479e-05 Jy ! Component: 100 - total flux cleaned = -0.000242461 Jy ! Component: 150 - total flux cleaned = -0.000353802 Jy ! Component: 200 - total flux cleaned = -0.000449599 Jy ! Total flux subtracted in 200 components = -0.000449599 Jy ! Clean residual min=-0.002760 max=0.002863 Jy/beam ! Clean residual mean=-0.000003 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.168525 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 62 components and 0.168525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067123Jy sigma=1.031518 ! Fit after self-cal, rms=0.067118Jy sigma=1.031363 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067118Jy sigma=1.031363 ! Fit after self-cal, rms=0.065491Jy sigma=0.994149 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000167381 Jy ! Component: 100 - total flux cleaned = 0.000194321 Jy ! Component: 150 - total flux cleaned = 0.00019401 Jy ! Component: 200 - total flux cleaned = 0.000193479 Jy ! Total flux subtracted in 200 components = 0.000193479 Jy ! Clean residual min=-0.002727 max=0.002735 Jy/beam ! Clean residual mean=-0.000003 rms=0.000690 Jy/beam ! Combined flux in latest and established models = 0.168718 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 70 components and 0.168718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065472Jy sigma=0.993719 ! Fit after self-cal, rms=0.065469Jy sigma=0.991414 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8603 x 2.165 at 0.87 degrees (North through East) ! Clean map min=-0.0025555 max=0.15134 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065469Jy sigma=0.991414 ! Fit after self-cal, rms=0.066759Jy sigma=0.983148 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066759Jy sigma=0.983148 ! Fit after self-cal, rms=0.066814Jy sigma=0.982874 ! Inverting map and beam ! Estimated beam: bmin=0.8618 mas, bmaj=2.175 mas, bpa=0.7656 degrees ! Estimated noise=0.697827 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123029 Jy ! Component: 100 - total flux cleaned = 7.13585e-05 Jy ! Component: 150 - total flux cleaned = 2.5236e-05 Jy ! Component: 200 - total flux cleaned = 3.57717e-06 Jy ! Total flux subtracted in 200 components = 3.57717e-06 Jy ! Clean residual min=-0.002416 max=0.002435 Jy/beam ! Clean residual mean=-0.000005 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.168722 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 82 components and 0.168722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066793Jy sigma=0.982466 ! Fit after self-cal, rms=0.066815Jy sigma=0.982381 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066815Jy sigma=0.982381 ! Fit after self-cal, rms=0.067151Jy sigma=0.970693 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067151Jy sigma=0.970693 ! Fit after self-cal, rms=0.067183Jy sigma=0.970620 ! Inverting map and beam ! Estimated beam: bmin=0.8631 mas, bmaj=2.172 mas, bpa=0.9726 degrees ! Estimated noise=0.700695 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00077474 Jy ! Component: 100 - total flux cleaned = 0.000774152 Jy ! Component: 150 - total flux cleaned = 0.000751018 Jy ! Component: 200 - total flux cleaned = 0.000707362 Jy ! Total flux subtracted in 200 components = 0.000707362 Jy ! Clean residual min=-0.002467 max=0.002437 Jy/beam ! Clean residual mean=-0.000005 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.169429 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 88 components and 0.169429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067168Jy sigma=0.970176 ! Fit after self-cal, rms=0.067181Jy sigma=0.970148 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.259 mas, bmaj=4.341 mas, bpa=0.3673 degrees ! Estimated noise=0.913465 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (25.2, -8.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00350891 Jy ! Component: 100 - total flux cleaned = 0.00416834 Jy ! Component: 150 - total flux cleaned = 0.00448278 Jy ! Component: 200 - total flux cleaned = 0.00464087 Jy ! Total flux subtracted in 200 components = 0.00464087 Jy ! Clean residual min=-0.002196 max=0.002123 Jy/beam ! Clean residual mean=-0.000010 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.17407 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 118 components and 0.17407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067169Jy sigma=0.968410 ! Fit after self-cal, rms=0.067166Jy sigma=0.968278 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6924 mas, bmaj=1.832 mas, bpa=-1.568 degrees ! Estimated noise=1.03802 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.133028 Jy ! Component: 100 - total flux cleaned = 0.151322 Jy ! Component: 150 - total flux cleaned = 0.156892 Jy ! Component: 200 - total flux cleaned = 0.160101 Jy ! Total flux subtracted in 200 components = 0.160101 Jy ! Clean residual min=-0.003758 max=0.003763 Jy/beam ! Clean residual mean=0.000003 rms=0.000963 Jy/beam ! Combined flux in latest and established models = 0.160101 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.160101 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8631 mas, bmaj=2.172 mas, bpa=0.9726 degrees ! Estimated noise=0.700695 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00571103 Jy ! Component: 100 - total flux cleaned = 0.00890942 Jy ! Component: 150 - total flux cleaned = 0.0100668 Jy ! Component: 200 - total flux cleaned = 0.0107226 Jy ! Total flux subtracted in 200 components = 0.0107226 Jy ! Clean residual min=-0.002387 max=0.002498 Jy/beam ! Clean residual mean=-0.000008 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.170824 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 62 components and 0.170824 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.259 mas, bmaj=4.341 mas, bpa=0.3673 degrees ! Estimated noise=0.913465 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203545 Jy ! Component: 100 - total flux cleaned = 0.00291519 Jy ! Component: 150 - total flux cleaned = 0.00308445 Jy ! Component: 200 - total flux cleaned = 0.00346497 Jy ! Total flux subtracted in 200 components = 0.00346497 Jy ! Clean residual min=-0.002238 max=0.002194 Jy/beam ! Clean residual mean=-0.000015 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.174289 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 90 components and 0.174289 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8631 mas, bmaj=2.172 mas, bpa=0.9726 degrees ! Estimated noise=0.700695 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000123736 Jy ! Component: 100 - total flux cleaned = -0.000180229 Jy ! Component: 150 - total flux cleaned = -0.000288469 Jy ! Component: 200 - total flux cleaned = -0.0003397 Jy ! Total flux subtracted in 200 components = -0.0003397 Jy ! Clean residual min=-0.002214 max=0.002283 Jy/beam ! Clean residual mean=-0.000007 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.173949 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 119 components and 0.173949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067133Jy sigma=0.967268 ! Fit after self-cal, rms=0.067109Jy sigma=0.967064 wmodel J1603-1007_X_2004_05_27_yyk\_map.mod ! Writing 119 model components to file: J1603-1007_X_2004_05_27_yyk_map.mod wobs J1603-1007_X_2004_05_27_yyk\_uvs.fits ! Writing UV FITS file: J1603-1007_X_2004_05_27_yyk_uvs.fits wwins J1603-1007_X_2004_05_27_yyk\_map.win ! wwins: Wrote 3 windows to J1603-1007_X_2004_05_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 9.02196e-05 Jy ! Component: 100 - total flux cleaned = 0.000125386 Jy ! Component: 150 - total flux cleaned = 0.000232567 Jy ! Component: 200 - total flux cleaned = 0.000266899 Jy ! Component: 250 - total flux cleaned = 0.000333232 Jy ! Component: 300 - total flux cleaned = 0.000398289 Jy ! Component: 350 - total flux cleaned = 0.000617188 Jy ! Component: 400 - total flux cleaned = 0.000830917 Jy ! Component: 450 - total flux cleaned = 0.00106927 Jy ! Component: 500 - total flux cleaned = 0.00130221 Jy ! Component: 550 - total flux cleaned = 0.00147369 Jy ! Component: 600 - total flux cleaned = 0.00158574 Jy ! Component: 650 - total flux cleaned = 0.00175109 Jy ! Component: 700 - total flux cleaned = 0.00185912 Jy ! Component: 750 - total flux cleaned = 0.00207148 Jy ! Component: 800 - total flux cleaned = 0.00225353 Jy ! Component: 850 - total flux cleaned = 0.00243197 Jy ! Component: 900 - total flux cleaned = 0.00250669 Jy ! Component: 950 - total flux cleaned = 0.00253114 Jy ! Component: 1000 - total flux cleaned = 0.00257988 Jy ! Component: 1050 - total flux cleaned = 0.00265227 Jy ! Component: 1100 - total flux cleaned = 0.00269912 Jy ! Component: 1150 - total flux cleaned = 0.00269859 Jy ! Component: 1200 - total flux cleaned = 0.00269887 Jy ! Component: 1250 - total flux cleaned = 0.002699 Jy ! Component: 1300 - total flux cleaned = 0.00278873 Jy ! Component: 1350 - total flux cleaned = 0.00283239 Jy ! Component: 1400 - total flux cleaned = 0.0028105 Jy ! Component: 1450 - total flux cleaned = 0.00281053 Jy ! Component: 1500 - total flux cleaned = 0.00285385 Jy ! Component: 1550 - total flux cleaned = 0.00293845 Jy ! Component: 1600 - total flux cleaned = 0.0029799 Jy ! Component: 1650 - total flux cleaned = 0.00295967 Jy ! Component: 1700 - total flux cleaned = 0.00298037 Jy ! Component: 1750 - total flux cleaned = 0.00298048 Jy ! Component: 1800 - total flux cleaned = 0.00294007 Jy ! Component: 1850 - total flux cleaned = 0.00297982 Jy ! Component: 1900 - total flux cleaned = 0.00296006 Jy ! Component: 1950 - total flux cleaned = 0.00292092 Jy ! Component: 2000 - total flux cleaned = 0.0029211 Jy ! Total flux subtracted in 2048 components = 0.00294013 Jy ! Clean residual min=-0.001052 max=0.001058 Jy/beam ! Clean residual mean=-0.000004 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.176889 Jy keep ! Adding 147 model components to the UV plane model. ! The established model now contains 266 components and 0.176889 Jy ![Exited script file: muppet] wmap "J1603-1007_X_2004_05_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8631 x 2.172 at 0.9726 degrees (North through East) ! Clean map min=-0.0020926 max=0.15213 Jy/beam ! Writing clean map to FITS file: J1603-1007_X_2004_05_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.15213 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000356189 device "J1603-1007_X_2004_05_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J1603-1007_X_2004_05_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.702404 0.702404 1.40481 2.80962 5.61924 11.2385 22.4769 44.9539 89.9078 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.152 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8631 x 2.172 at 0.9726 degrees (North through East) ! Clean map min=-0.0020926 max=0.15213 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1603-1007_X_2004_05_27_yyk\_map.gif/gif" ! Attempting to open device: 'J1603-1007_X_2004_05_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1603-1007_X_2004_05_27_yyk_uvs.log closed on Wed Dec 7 00:36:07 2005