! Started logfile: J1603-1007_S_2004_05_27_yyk_uvs.log on Wed Dec 7 00:35:59 2005 obs J1603-1007_S_2004_05_27_yyk_uve.fits ! Reading UV FITS file: J1603-1007_S_2004_05_27_yyk_uve.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.961111 visibilities/baseline/integration-bin. ! Found source: J1603-1007 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1383 lines of history. ! ! Reading 2768 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1603-1007_S_2004_05_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.135335 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.891261Jy sigma=16.269903 ! Fit after self-cal, rms=0.891221Jy sigma=16.267135 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.563 mas, bmaj=6.654 mas, bpa=-2.926 degrees ! Estimated noise=1.13035 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0958856 Jy ! Component: 100 - total flux cleaned = 0.116189 Jy ! Total flux subtracted in 100 components = 0.116189 Jy ! Clean residual min=-0.004844 max=0.005258 Jy/beam ! Clean residual mean=-0.000004 rms=0.001339 Jy/beam ! Combined flux in latest and established models = 0.116189 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.116189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073897Jy sigma=1.097967 ! Fit after self-cal, rms=0.073855Jy sigma=1.096858 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.326 mas, bmaj=8.16 mas, bpa=-2.296 degrees ! Estimated noise=0.753291 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00771907 Jy ! Component: 100 - total flux cleaned = 0.0104138 Jy ! Component: 150 - total flux cleaned = 0.0113744 Jy ! Component: 200 - total flux cleaned = 0.0115045 Jy ! Total flux subtracted in 200 components = 0.0115045 Jy ! Clean residual min=-0.003637 max=0.003918 Jy/beam ! Clean residual mean=0.000052 rms=0.001121 Jy/beam ! Combined flux in latest and established models = 0.127693 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 32 components and 0.127693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073318Jy sigma=1.085416 ! Fit after self-cal, rms=0.073313Jy sigma=1.085202 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01684 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.04 HN 0.94 KP 0.95 ! LA 1.06 MK 0.96 NL 0.96 OV 0.95 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.983552 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.06 KP 1.02 ! LA 1.06 MK 1.02 NL 1.06 OV 1.02 ! PT 0.99 SC 0.92 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.03163 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.89 HN 1.05 KP 0.95 ! LA 1.00* MK 1.01 NL 0.97 OV 0.87 ! PT 0.92 SC 1.07 ! ! ! Fit before self-cal, rms=0.073313Jy sigma=1.085202 ! Fit after self-cal, rms=0.073097Jy sigma=1.077216 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073097Jy sigma=1.077216 ! Fit after self-cal, rms=0.073087Jy sigma=1.077033 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.336 mas, bmaj=8.161 mas, bpa=-1.865 degrees ! Estimated noise=0.750198 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0001058 Jy ! Component: 100 - total flux cleaned = 0.000107908 Jy ! Component: 150 - total flux cleaned = 0.000108122 Jy ! Component: 200 - total flux cleaned = 0.000108323 Jy ! Total flux subtracted in 200 components = 0.000108323 Jy ! Clean residual min=-0.003428 max=0.003697 Jy/beam ! Clean residual mean=0.000073 rms=0.001064 Jy/beam ! Combined flux in latest and established models = 0.127802 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 44 components and 0.127802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073065Jy sigma=1.076800 ! Fit after self-cal, rms=0.073060Jy sigma=1.076654 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073060Jy sigma=1.076654 ! Fit after self-cal, rms=0.070649Jy sigma=1.029187 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124494 Jy ! Component: 100 - total flux cleaned = 0.00138927 Jy ! Component: 150 - total flux cleaned = 0.00139045 Jy ! Component: 200 - total flux cleaned = 0.00139093 Jy ! Total flux subtracted in 200 components = 0.00139093 Jy ! Clean residual min=-0.003519 max=0.003370 Jy/beam ! Clean residual mean=0.000068 rms=0.001032 Jy/beam ! Combined flux in latest and established models = 0.129193 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 51 components and 0.129193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070635Jy sigma=1.028822 ! Fit after self-cal, rms=0.070550Jy sigma=1.025955 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.336 x 8.161 at -1.865 degrees (North through East) ! Clean map min=-0.0034362 max=0.11309 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070550Jy sigma=1.025955 ! Fit after self-cal, rms=0.069634Jy sigma=1.015535 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069634Jy sigma=1.015535 ! Fit after self-cal, rms=0.069672Jy sigma=1.015174 ! Inverting map and beam ! Estimated beam: bmin=3.326 mas, bmaj=8.106 mas, bpa=-1.37 degrees ! Estimated noise=0.734982 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00175182 Jy ! Component: 100 - total flux cleaned = -0.00176096 Jy ! Component: 150 - total flux cleaned = -0.00173976 Jy ! Component: 200 - total flux cleaned = -0.00172083 Jy ! Total flux subtracted in 200 components = -0.00172083 Jy ! Clean residual min=-0.003080 max=0.003551 Jy/beam ! Clean residual mean=0.000060 rms=0.000899 Jy/beam ! Combined flux in latest and established models = 0.127472 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 57 components and 0.127472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069622Jy sigma=1.014392 ! Fit after self-cal, rms=0.069641Jy sigma=1.014346 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069641Jy sigma=1.014346 ! Fit after self-cal, rms=0.069438Jy sigma=1.008650 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069438Jy sigma=1.008650 ! Fit after self-cal, rms=0.069465Jy sigma=1.008528 ! Inverting map and beam ! Estimated beam: bmin=3.341 mas, bmaj=8.169 mas, bpa=-1.673 degrees ! Estimated noise=0.721917 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00205251 Jy ! Component: 100 - total flux cleaned = -0.00250705 Jy ! Component: 150 - total flux cleaned = -0.00254098 Jy ! Component: 200 - total flux cleaned = -0.00257208 Jy ! Total flux subtracted in 200 components = -0.00257208 Jy ! Clean residual min=-0.002884 max=0.003510 Jy/beam ! Clean residual mean=0.000069 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 0.1249 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 74 components and 0.1249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069445Jy sigma=1.007497 ! Fit after self-cal, rms=0.069452Jy sigma=1.007474 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.129 mas, bmaj=14.61 mas, bpa=2.742 degrees ! Estimated noise=0.904158 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000327622 Jy ! Component: 100 - total flux cleaned = 0.000415115 Jy ! Component: 150 - total flux cleaned = 0.000490188 Jy ! Component: 200 - total flux cleaned = 0.000522042 Jy ! Total flux subtracted in 200 components = 0.000522042 Jy ! Clean residual min=-0.003513 max=0.003446 Jy/beam ! Clean residual mean=0.000122 rms=0.001165 Jy/beam ! Combined flux in latest and established models = 0.125422 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 76 components and 0.125422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069473Jy sigma=1.007850 ! Fit after self-cal, rms=0.069472Jy sigma=1.007749 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.566 mas, bmaj=6.671 mas, bpa=-2.701 degrees ! Estimated noise=1.08678 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0936763 Jy ! Component: 100 - total flux cleaned = 0.113698 Jy ! Component: 150 - total flux cleaned = 0.120424 Jy ! Component: 200 - total flux cleaned = 0.123396 Jy ! Total flux subtracted in 200 components = 0.123396 Jy ! Clean residual min=-0.003685 max=0.003584 Jy/beam ! Clean residual mean=0.000016 rms=0.000960 Jy/beam ! Combined flux in latest and established models = 0.123397 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.123397 Jy ! Inverting map and beam ! Estimated beam: bmin=3.341 mas, bmaj=8.169 mas, bpa=-1.673 degrees ! Estimated noise=0.721917 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137674 Jy ! Component: 100 - total flux cleaned = 0.0015289 Jy ! Component: 150 - total flux cleaned = 0.00156213 Jy ! Component: 200 - total flux cleaned = 0.00159214 Jy ! Total flux subtracted in 200 components = 0.00159214 Jy ! Clean residual min=-0.003021 max=0.003533 Jy/beam ! Clean residual mean=0.000069 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.124989 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 0.124989 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.129 mas, bmaj=14.61 mas, bpa=2.742 degrees ! Estimated noise=0.904158 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000203638 Jy ! Component: 100 - total flux cleaned = 0.000300337 Jy ! Component: 150 - total flux cleaned = 0.000345414 Jy ! Component: 200 - total flux cleaned = 0.000425792 Jy ! Total flux subtracted in 200 components = 0.000425792 Jy ! Clean residual min=-0.003493 max=0.003550 Jy/beam ! Clean residual mean=0.000123 rms=0.001172 Jy/beam ! Combined flux in latest and established models = 0.125414 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 44 components and 0.125414 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.341 mas, bmaj=8.169 mas, bpa=-1.673 degrees ! Estimated noise=0.721917 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000310544 Jy ! Component: 100 - total flux cleaned = -0.000207051 Jy ! Component: 150 - total flux cleaned = -0.000151756 Jy ! Component: 200 - total flux cleaned = -0.000103869 Jy ! Total flux subtracted in 200 components = -0.000103869 Jy ! Clean residual min=-0.002915 max=0.003441 Jy/beam ! Clean residual mean=0.000067 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.125311 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 55 components and 0.125311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069477Jy sigma=1.007896 ! Fit after self-cal, rms=0.069474Jy sigma=1.007842 wmodel J1603-1007_S_2004_05_27_yyk\_map.mod ! Writing 55 model components to file: J1603-1007_S_2004_05_27_yyk_map.mod wobs J1603-1007_S_2004_05_27_yyk\_uvs.fits ! Writing UV FITS file: J1603-1007_S_2004_05_27_yyk_uvs.fits wwins J1603-1007_S_2004_05_27_yyk\_map.win ! wwins: Wrote 1 windows to J1603-1007_S_2004_05_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000805618 Jy ! Component: 100 - total flux cleaned = 0.000909703 Jy ! Component: 150 - total flux cleaned = 0.000908637 Jy ! Component: 200 - total flux cleaned = 0.000907584 Jy ! Component: 250 - total flux cleaned = 0.000820902 Jy ! Component: 300 - total flux cleaned = 0.000656668 Jy ! Component: 350 - total flux cleaned = 0.000498486 Jy ! Component: 400 - total flux cleaned = 0.000498961 Jy ! Component: 450 - total flux cleaned = 0.000461415 Jy ! Component: 500 - total flux cleaned = 0.000424949 Jy ! Component: 550 - total flux cleaned = 0.000495562 Jy ! Component: 600 - total flux cleaned = 0.000389912 Jy ! Component: 650 - total flux cleaned = 0.00038983 Jy ! Component: 700 - total flux cleaned = 0.000323232 Jy ! Component: 750 - total flux cleaned = 0.000355609 Jy ! Component: 800 - total flux cleaned = 0.000418933 Jy ! Component: 850 - total flux cleaned = 0.000449298 Jy ! Component: 900 - total flux cleaned = 0.000510022 Jy ! Component: 950 - total flux cleaned = 0.000629284 Jy ! Component: 1000 - total flux cleaned = 0.000717825 Jy ! Component: 1050 - total flux cleaned = 0.000833649 Jy ! Component: 1100 - total flux cleaned = 0.000919546 Jy ! Component: 1150 - total flux cleaned = 0.00100376 Jy ! Component: 1200 - total flux cleaned = 0.00119801 Jy ! Component: 1250 - total flux cleaned = 0.00122568 Jy ! Component: 1300 - total flux cleaned = 0.0013332 Jy ! Component: 1350 - total flux cleaned = 0.00143997 Jy ! Component: 1400 - total flux cleaned = 0.00151829 Jy ! Component: 1450 - total flux cleaned = 0.00159567 Jy ! Component: 1500 - total flux cleaned = 0.00169749 Jy ! Component: 1550 - total flux cleaned = 0.00184785 Jy ! Component: 1600 - total flux cleaned = 0.00192162 Jy ! Component: 1650 - total flux cleaned = 0.00199483 Jy ! Component: 1700 - total flux cleaned = 0.00206712 Jy ! Component: 1750 - total flux cleaned = 0.00206739 Jy ! Component: 1800 - total flux cleaned = 0.00216213 Jy ! Component: 1850 - total flux cleaned = 0.00227892 Jy ! Component: 1900 - total flux cleaned = 0.00234794 Jy ! Component: 1950 - total flux cleaned = 0.00243882 Jy ! Component: 2000 - total flux cleaned = 0.00252896 Jy ! Total flux subtracted in 2048 components = 0.0025511 Jy ! Clean residual min=-0.001496 max=0.001373 Jy/beam ! Clean residual mean=0.000040 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.127862 Jy keep ! Adding 150 model components to the UV plane model. ! The established model now contains 205 components and 0.127862 Jy ![Exited script file: muppet] wmap "J1603-1007_S_2004_05_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.341 x 8.169 at -1.673 degrees (North through East) ! Clean map min=-0.0030205 max=0.10842 Jy/beam ! Writing clean map to FITS file: J1603-1007_S_2004_05_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.10842 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000475748 device "J1603-1007_S_2004_05_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J1603-1007_S_2004_05_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.31641 1.31641 2.63281 5.26562 10.5312 21.0625 42.125 84.2499 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.108 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.341 x 8.169 at -1.673 degrees (North through East) ! Clean map min=-0.0030205 max=0.10842 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1603-1007_S_2004_05_27_yyk\_map.gif/gif" ! Attempting to open device: 'J1603-1007_S_2004_05_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1603-1007_S_2004_05_27_yyk_uvs.log closed on Wed Dec 7 00:36:03 2005