! Started logfile: J1524-3012_S_2004_05_08_yyk_uvs.log on Wed Dec  7 01:04:12 2005
obs J1524-3012_S_2004_05_08_yyk_uve.fits
! Reading UV FITS file: J1524-3012_S_2004_05_08_yyk_uve.fits
! AN table 1: 9 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.402469 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1524-3012
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1438 lines of history.
! 
! Reading 652 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1524-3012_S_2004_05_08_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 256x256 pixels with 1.00x1.00 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.164897 Jy 
startmod ,phase_soltime
! Applying default point source starting model.
! Performing phase self-cal over 10 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 90 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 90 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 90 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.863950Jy  sigma=12.122684
! Fit after  self-cal, rms=0.862883Jy  sigma=12.114876
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.665 mas, bmaj=26.61 mas, bpa=3.894 degrees
! Estimated noise=4.9623 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.122718 Jy
! Component: 100  -  total flux cleaned = 0.144153 Jy
! Total flux subtracted in 100 components = 0.144153 Jy
! Clean residual min=-0.010299 max=0.010385 Jy/beam
! Clean residual mean=0.000038 rms=0.004820 Jy/beam
! Combined flux in latest and established models = 0.144153 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.144153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081947Jy  sigma=0.987825
! Fit after  self-cal, rms=0.081969Jy  sigma=0.987162
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.219 mas, bmaj=27.84 mas, bpa=4.66 degrees
! Estimated noise=4.66339 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0105995 Jy
! Component: 100  -  total flux cleaned = 0.0176173 Jy
! Component: 150  -  total flux cleaned = 0.0177458 Jy
! Component: 200  -  total flux cleaned = 0.0164867 Jy
! Total flux subtracted in 200 components = 0.0164867 Jy
! Clean residual min=-0.003709 max=0.003777 Jy/beam
! Clean residual mean=0.000008 rms=0.001784 Jy/beam
! Combined flux in latest and established models = 0.16064 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 70 model components to the UV plane model.
! The established model now contains 94 components and 0.16064 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079641Jy  sigma=0.901134
! Fit after  self-cal, rms=0.079529Jy  sigma=0.900887
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
selflims ampcor_selflim
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    FD        0.00*    HN        0.00*    KP        0.00*    
!   LA        0.00*    MK        0.00*    NL        0.00*    OV        0.00*    
!   PT        0.00*    SC        0.00*    
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    FD        0.00*    HN        0.00*    KP        0.00*    
!   LA        0.00*    MK        0.00*    NL        0.00*    OV        0.00*    
!   PT        0.00*    SC        0.00*    
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    FD        0.00*    HN        0.00*    KP        0.00*    
!   LA        0.00*    MK        0.00*    NL        0.00*    OV        0.00*    
!   PT        0.00*    SC        0.00*    
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1.00434
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.97     HN        1.00*    KP        0.99     
!   LA        1.00*    MK        1.00*    NL        1.02     OV        0.95     
!   PT        0.97     SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.079529Jy  sigma=0.900887
! Fit after  self-cal, rms=0.078279Jy  sigma=0.895163
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078279Jy  sigma=0.895163
! Fit after  self-cal, rms=0.078282Jy  sigma=0.895162
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.361 mas, bmaj=28.58 mas, bpa=4.56 degrees
! Estimated noise=4.61895 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00122953 Jy
! Component: 100  -  total flux cleaned = 0.00114585 Jy
! Component: 150  -  total flux cleaned = 0.00081685 Jy
! Component: 200  -  total flux cleaned = 0.000405816 Jy
! Total flux subtracted in 200 components = 0.000405816 Jy
! Clean residual min=-0.000800 max=0.000785 Jy/beam
! Clean residual mean=-0.000009 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 0.161046 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 60 model components to the UV plane model.
! The established model now contains 153 components and 0.161045 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078260Jy  sigma=0.891709
! Fit after  self-cal, rms=0.078273Jy  sigma=0.891703
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078273Jy  sigma=0.891703
! Fit after  self-cal, rms=0.067242Jy  sigma=0.788939
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00101856 Jy
! Component: 100  -  total flux cleaned = 0.00147644 Jy
! Component: 150  -  total flux cleaned = 0.00218046 Jy
! Component: 200  -  total flux cleaned = 0.00247881 Jy
! Total flux subtracted in 200 components = 0.00247881 Jy
! Clean residual min=-0.000889 max=0.000881 Jy/beam
! Clean residual mean=0.000007 rms=0.000384 Jy/beam
! Combined flux in latest and established models = 0.163524 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 54 model components to the UV plane model.
! The established model now contains 207 components and 0.163524 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066979Jy  sigma=0.784643
! Fit after  self-cal, rms=0.064328Jy  sigma=0.775159
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.361 x 28.58 at 4.56 degrees (North through East)
! Clean map  min=-0.0071376  max=0.1423 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064328Jy  sigma=0.775159
! Fit after  self-cal, rms=0.063572Jy  sigma=0.774754
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063572Jy  sigma=0.774754
! Fit after  self-cal, rms=0.062790Jy  sigma=0.772775
! Inverting map and beam 
! Estimated beam: bmin=8.295 mas, bmaj=28.6 mas, bpa=4.185 degrees
! Estimated noise=4.58385 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000450572 Jy
! Component: 100  -  total flux cleaned = 0.000441997 Jy
! Component: 150  -  total flux cleaned = 0.000312737 Jy
! Component: 200  -  total flux cleaned = 0.00018955 Jy
! Total flux subtracted in 200 components = 0.00018955 Jy
! Clean residual min=-0.000508 max=0.000509 Jy/beam
! Clean residual mean=-0.000007 rms=0.000208 Jy/beam
! Combined flux in latest and established models = 0.163714 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 39 model components to the UV plane model.
! The established model now contains 242 components and 0.163714 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062748Jy  sigma=0.771939
! Fit after  self-cal, rms=0.062555Jy  sigma=0.771379
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062555Jy  sigma=0.771379
! Fit after  self-cal, rms=0.062189Jy  sigma=0.779887
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062189Jy  sigma=0.779887
! Fit after  self-cal, rms=0.062167Jy  sigma=0.779571
! Inverting map and beam 
! Estimated beam: bmin=8.314 mas, bmaj=28.94 mas, bpa=4.568 degrees
! Estimated noise=4.47517 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00646788 Jy
! Component: 100  -  total flux cleaned = -0.00683088 Jy
! Component: 150  -  total flux cleaned = -0.00638023 Jy
! Component: 200  -  total flux cleaned = -0.00657834 Jy
! Total flux subtracted in 200 components = -0.00657834 Jy
! Clean residual min=-0.001263 max=0.001319 Jy/beam
! Clean residual mean=-0.000006 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.157135 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 59 model components to the UV plane model.
! The established model now contains 301 components and 0.157136 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061628Jy  sigma=0.767754
! Fit after  self-cal, rms=0.061592Jy  sigma=0.767530
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.586 mas, bmaj=29.69 mas, bpa=6.559 degrees
! Estimated noise=4.57898 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00109476 Jy
! Component: 100  -  total flux cleaned = -0.000474659 Jy
! Component: 150  -  total flux cleaned = -0.000652186 Jy
! Component: 200  -  total flux cleaned = -0.000693993 Jy
! Total flux subtracted in 200 components = -0.000693993 Jy
! Clean residual min=-0.000477 max=0.000479 Jy/beam
! Clean residual mean=-0.000008 rms=0.000209 Jy/beam
! Combined flux in latest and established models = 0.156442 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 55 model components to the UV plane model.
! The established model now contains 349 components and 0.156442 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061557Jy  sigma=0.766081
! Fit after  self-cal, rms=0.061555Jy  sigma=0.766051
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.703 mas, bmaj=27.06 mas, bpa=3.84 degrees
! Estimated noise=4.79731 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.121913 Jy
! Component: 100  -  total flux cleaned = 0.135198 Jy
! Component: 150  -  total flux cleaned = 0.144018 Jy
! Component: 200  -  total flux cleaned = 0.146854 Jy
! Total flux subtracted in 200 components = 0.146854 Jy
! Clean residual min=-0.004998 max=0.005043 Jy/beam
! Clean residual mean=0.000030 rms=0.002541 Jy/beam
! Combined flux in latest and established models = 0.146854 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 42 model components to the UV plane model.
! The established model now contains 42 components and 0.146854 Jy
! Inverting map and beam 
! Estimated beam: bmin=8.314 mas, bmaj=28.94 mas, bpa=4.568 degrees
! Estimated noise=4.47517 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000832386 Jy
! Component: 100  -  total flux cleaned = 0.00217894 Jy
! Component: 150  -  total flux cleaned = 0.00146474 Jy
! Component: 200  -  total flux cleaned = 0.000721753 Jy
! Total flux subtracted in 200 components = 0.000721753 Jy
! Clean residual min=-0.002159 max=0.002178 Jy/beam
! Clean residual mean=-0.000028 rms=0.001043 Jy/beam
! Combined flux in latest and established models = 0.147576 Jy
! Adding 68 model components to the UV plane model.
! The established model now contains 108 components and 0.147576 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.586 mas, bmaj=29.69 mas, bpa=6.559 degrees
! Estimated noise=4.57898 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000396975 Jy
! Component: 100  -  total flux cleaned = -0.000183308 Jy
! Component: 150  -  total flux cleaned = -0.000269871 Jy
! Component: 200  -  total flux cleaned = 0.000172453 Jy
! Total flux subtracted in 200 components = 0.000172453 Jy
! Clean residual min=-0.000845 max=0.000843 Jy/beam
! Clean residual mean=-0.000009 rms=0.000422 Jy/beam
! Combined flux in latest and established models = 0.147748 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 158 components and 0.147748 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=8.314 mas, bmaj=28.94 mas, bpa=4.568 degrees
! Estimated noise=4.47517 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -9.19008e-05 Jy
! Component: 100  -  total flux cleaned = -0.000689234 Jy
! Component: 150  -  total flux cleaned = -0.00143442 Jy
! Component: 200  -  total flux cleaned = -0.00228157 Jy
! Total flux subtracted in 200 components = -0.00228157 Jy
! Clean residual min=-0.000485 max=0.000482 Jy/beam
! Clean residual mean=-0.000003 rms=0.000238 Jy/beam
! Combined flux in latest and established models = 0.145467 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 58 model components to the UV plane model.
! The established model now contains 215 components and 0.145466 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061443Jy  sigma=0.765818
! Fit after  self-cal, rms=0.061440Jy  sigma=0.765778
wmodel J1524-3012_S_2004_05_08_yyk\_map.mod
! Writing 215 model components to file: J1524-3012_S_2004_05_08_yyk_map.mod
wobs J1524-3012_S_2004_05_08_yyk\_uvs.fits
! Writing UV FITS file: J1524-3012_S_2004_05_08_yyk_uvs.fits
wwins J1524-3012_S_2004_05_08_yyk\_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: muppet]
! 
wmap "J1524-3012_S_2004_05_08_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.314 x 28.94 at 4.568 degrees (North through East)
! Clean map  min=-0.0062606  max=0.1381 Jy/beam
! Writing clean map to FITS file: J1524-3012_S_2004_05_08_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.138102 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000222044 
device "J1524-3012_S_2004_05_08_yyk\_map.eps/VPS"
! Attempting to open device: 'J1524-3012_S_2004_05_08_yyk_map.eps/VPS'
loglevs 8*100*3*image_rms/peak_flux
! The new contour levels are:
!  -3.85878 3.85878 7.71756 15.4351 30.8702 61.7405
print "clev=",int(8*3*image_rms*10000)/10000
! clev= 0.0053 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.138 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.314 x 28.94 at 4.568 degrees (North through East)
! Clean map  min=-0.0062606  max=0.1381 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1524-3012_S_2004_05_08_yyk\_map.gif/gif"
! Attempting to open device: 'J1524-3012_S_2004_05_08_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1524-3012_S_2004_05_08_yyk_uvs.log closed on Wed Dec  7 01:04:13 2005