! Started logfile: J1522-2730_S_2004_04_30_yyk_uvs.log on Wed Dec 7 00:33:17 2005 obs J1522-2730_S_2004_04_30_yyk_uve.fits ! Reading UV FITS file: J1522-2730_S_2004_04_30_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1522-2730 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1627 lines of history. ! ! Reading 720 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1522-2730_S_2004_04_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.29962 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.320335Jy sigma=4.867359 ! Fit after self-cal, rms=0.320281Jy sigma=4.865900 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.467 mas, bmaj=7.302 mas, bpa=-3.255 degrees ! Estimated noise=2.73669 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.11492 Jy ! Component: 100 - total flux cleaned = 1.26324 Jy ! Total flux subtracted in 100 components = 1.26324 Jy ! Clean residual min=-0.031170 max=0.038778 Jy/beam ! Clean residual mean=-0.000132 rms=0.009540 Jy/beam ! Combined flux in latest and established models = 1.26324 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 1.26324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131602Jy sigma=1.922281 ! Fit after self-cal, rms=0.131605Jy sigma=1.921954 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.872 mas, bmaj=8.272 mas, bpa=-2.606 degrees ! Estimated noise=2.15183 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0539739 Jy ! Component: 100 - total flux cleaned = 0.0766966 Jy ! Component: 150 - total flux cleaned = 0.0870576 Jy ! Component: 200 - total flux cleaned = 0.0892113 Jy ! Total flux subtracted in 200 components = 0.0892113 Jy ! Clean residual min=-0.020343 max=0.020764 Jy/beam ! Clean residual mean=-0.000396 rms=0.005780 Jy/beam ! Combined flux in latest and established models = 1.35245 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 36 components and 1.35245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118594Jy sigma=1.686234 ! Fit after self-cal, rms=0.118527Jy sigma=1.685788 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.991056 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.03 KP 0.98 ! LA 1.10 MK 1.00 NL 1.00 OV 0.98 ! PT 1.02 SC 0.95 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.982702 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.13 KP 1.01 ! LA 1.08 MK 1.01 NL 1.03 OV 0.99 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.999696 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 1.06 KP 0.97 ! LA 0.93 MK 1.02 NL 1.09 OV 1.03 ! PT 1.04 SC 0.99 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.01703 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.01 KP 0.91 ! LA 1.00* MK 0.95 NL 0.98 OV 1.00* ! PT 0.95 SC 1.10 ! ! ! Fit before self-cal, rms=0.118527Jy sigma=1.685788 ! Fit after self-cal, rms=0.078855Jy sigma=1.088292 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078855Jy sigma=1.088292 ! Fit after self-cal, rms=0.078849Jy sigma=1.088256 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.893 mas, bmaj=8.286 mas, bpa=-2.422 degrees ! Estimated noise=2.12748 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0140502 Jy ! Component: 100 - total flux cleaned = -0.0185165 Jy ! Component: 150 - total flux cleaned = -0.0189895 Jy ! Component: 200 - total flux cleaned = -0.0192177 Jy ! Total flux subtracted in 200 components = -0.0192177 Jy ! Clean residual min=-0.007612 max=0.008968 Jy/beam ! Clean residual mean=-0.000032 rms=0.002299 Jy/beam ! Combined flux in latest and established models = 1.33323 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 41 components and 1.33323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077391Jy sigma=1.060569 ! Fit after self-cal, rms=0.077371Jy sigma=1.060482 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077371Jy sigma=1.060482 ! Fit after self-cal, rms=0.074313Jy sigma=1.007388 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.82264e-05 Jy ! Component: 100 - total flux cleaned = -9.87157e-05 Jy ! Component: 150 - total flux cleaned = -0.000147068 Jy ! Component: 200 - total flux cleaned = -0.000189826 Jy ! Total flux subtracted in 200 components = -0.000189826 Jy ! Clean residual min=-0.007614 max=0.008891 Jy/beam ! Clean residual mean=-0.000032 rms=0.002273 Jy/beam ! Combined flux in latest and established models = 1.33304 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 46 components and 1.33304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074287Jy sigma=1.006381 ! Fit after self-cal, rms=0.074151Jy sigma=1.003070 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.893 x 8.286 at -2.422 degrees (North through East) ! Clean map min=-0.0075674 max=1.272 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074151Jy sigma=1.003070 ! Fit after self-cal, rms=0.068606Jy sigma=0.910153 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068606Jy sigma=0.910153 ! Fit after self-cal, rms=0.068610Jy sigma=0.909902 ! Inverting map and beam ! Estimated beam: bmin=2.889 mas, bmaj=8.283 mas, bpa=-2.402 degrees ! Estimated noise=2.12682 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000156935 Jy ! Component: 100 - total flux cleaned = -0.000258544 Jy ! Component: 150 - total flux cleaned = -0.000344996 Jy ! Component: 200 - total flux cleaned = -0.00041869 Jy ! Total flux subtracted in 200 components = -0.00041869 Jy ! Clean residual min=-0.005916 max=0.006671 Jy/beam ! Clean residual mean=0.000040 rms=0.001744 Jy/beam ! Combined flux in latest and established models = 1.33262 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 50 components and 1.33262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068576Jy sigma=0.909117 ! Fit after self-cal, rms=0.068564Jy sigma=0.909000 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068564Jy sigma=0.909000 ! Fit after self-cal, rms=0.067318Jy sigma=0.890948 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067318Jy sigma=0.890948 ! Fit after self-cal, rms=0.067319Jy sigma=0.890946 ! Inverting map and beam ! Estimated beam: bmin=2.889 mas, bmaj=8.28 mas, bpa=-2.373 degrees ! Estimated noise=2.12649 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -1.51482e-05 Jy ! Component: 100 - total flux cleaned = 2.87405e-05 Jy ! Component: 150 - total flux cleaned = -3.37113e-05 Jy ! Component: 200 - total flux cleaned = -8.76835e-05 Jy ! Total flux subtracted in 200 components = -8.76835e-05 Jy ! Clean residual min=-0.005647 max=0.006714 Jy/beam ! Clean residual mean=0.000048 rms=0.001731 Jy/beam ! Combined flux in latest and established models = 1.33253 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 52 components and 1.33253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067308Jy sigma=0.890482 ! Fit after self-cal, rms=0.067294Jy sigma=0.890420 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.662 mas, bmaj=23.07 mas, bpa=0.1144 degrees ! Estimated noise=2.81589 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00023315 Jy ! Component: 100 - total flux cleaned = 0.000222548 Jy ! Component: 150 - total flux cleaned = 0.000261648 Jy ! Component: 200 - total flux cleaned = 0.000293569 Jy ! Total flux subtracted in 200 components = 0.000293569 Jy ! Clean residual min=-0.006274 max=0.007357 Jy/beam ! Clean residual mean=0.000110 rms=0.002393 Jy/beam ! Combined flux in latest and established models = 1.33283 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 58 components and 1.33283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067357Jy sigma=0.890787 ! Fit after self-cal, rms=0.067302Jy sigma=0.890101 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.474 mas, bmaj=7.296 mas, bpa=-3.227 degrees ! Estimated noise=2.71715 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.1071 Jy ! Component: 100 - total flux cleaned = 1.253 Jy ! Component: 150 - total flux cleaned = 1.29043 Jy ! Component: 200 - total flux cleaned = 1.30757 Jy ! Total flux subtracted in 200 components = 1.30757 Jy ! Clean residual min=-0.008518 max=0.009329 Jy/beam ! Clean residual mean=0.000031 rms=0.002516 Jy/beam ! Combined flux in latest and established models = 1.30757 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 1.30757 Jy ! Inverting map and beam ! Estimated beam: bmin=2.889 mas, bmaj=8.28 mas, bpa=-2.373 degrees ! Estimated noise=2.12649 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.5, -10). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145871 Jy ! Component: 100 - total flux cleaned = 0.0212027 Jy ! Component: 150 - total flux cleaned = 0.0247582 Jy ! Component: 200 - total flux cleaned = 0.0268134 Jy ! Total flux subtracted in 200 components = 0.0268134 Jy ! Clean residual min=-0.005991 max=0.006443 Jy/beam ! Clean residual mean=0.000049 rms=0.001614 Jy/beam ! Combined flux in latest and established models = 1.33438 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 83 components and 1.33438 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.662 mas, bmaj=23.07 mas, bpa=0.1144 degrees ! Estimated noise=2.81589 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195482 Jy ! Component: 100 - total flux cleaned = 0.00211911 Jy ! Component: 150 - total flux cleaned = 0.00216996 Jy ! Component: 200 - total flux cleaned = 0.00226458 Jy ! Total flux subtracted in 200 components = 0.00226458 Jy ! Clean residual min=-0.005754 max=0.006739 Jy/beam ! Clean residual mean=0.000118 rms=0.002208 Jy/beam ! Combined flux in latest and established models = 1.33665 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 92 components and 1.33665 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.889 mas, bmaj=8.28 mas, bpa=-2.373 degrees ! Estimated noise=2.12649 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000643024 Jy ! Component: 100 - total flux cleaned = -0.00073159 Jy ! Component: 150 - total flux cleaned = -0.000735546 Jy ! Component: 200 - total flux cleaned = -0.000699423 Jy ! Total flux subtracted in 200 components = -0.000699423 Jy ! Clean residual min=-0.005889 max=0.006355 Jy/beam ! Clean residual mean=0.000052 rms=0.001578 Jy/beam ! Combined flux in latest and established models = 1.33595 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 107 components and 1.33595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066890Jy sigma=0.884724 ! Fit after self-cal, rms=0.066817Jy sigma=0.884129 wmodel J1522-2730_S_2004_04_30_yyk\_map.mod ! Writing 107 model components to file: J1522-2730_S_2004_04_30_yyk_map.mod wobs J1522-2730_S_2004_04_30_yyk\_uvs.fits ! Writing UV FITS file: J1522-2730_S_2004_04_30_yyk_uvs.fits wwins J1522-2730_S_2004_04_30_yyk\_map.win ! wwins: Wrote 2 windows to J1522-2730_S_2004_04_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000326073 Jy ! Component: 100 - total flux cleaned = -0.000927344 Jy ! Component: 150 - total flux cleaned = -0.00221212 Jy ! Component: 200 - total flux cleaned = -0.00273755 Jy ! Component: 250 - total flux cleaned = -0.0033733 Jy ! Component: 300 - total flux cleaned = -0.00370805 Jy ! Component: 350 - total flux cleaned = -0.00434684 Jy ! Component: 400 - total flux cleaned = -0.0048367 Jy ! Component: 450 - total flux cleaned = -0.00536731 Jy ! Component: 500 - total flux cleaned = -0.00599055 Jy ! Component: 550 - total flux cleaned = -0.00648063 Jy ! Component: 600 - total flux cleaned = -0.00711146 Jy ! Component: 650 - total flux cleaned = -0.00761852 Jy ! Component: 700 - total flux cleaned = -0.00791353 Jy ! Component: 750 - total flux cleaned = -0.00824646 Jy ! Component: 800 - total flux cleaned = -0.00847729 Jy ! Component: 850 - total flux cleaned = -0.00878944 Jy ! Component: 900 - total flux cleaned = -0.00896261 Jy ! Component: 950 - total flux cleaned = -0.00900518 Jy ! Component: 1000 - total flux cleaned = -0.00913057 Jy ! Component: 1050 - total flux cleaned = -0.00925303 Jy ! Component: 1100 - total flux cleaned = -0.00921358 Jy ! Component: 1150 - total flux cleaned = -0.00937061 Jy ! Component: 1200 - total flux cleaned = -0.00944705 Jy ! Component: 1250 - total flux cleaned = -0.00944632 Jy ! Component: 1300 - total flux cleaned = -0.00944657 Jy ! Component: 1350 - total flux cleaned = -0.0094097 Jy ! Component: 1400 - total flux cleaned = -0.00944613 Jy ! Component: 1450 - total flux cleaned = -0.00944525 Jy ! Component: 1500 - total flux cleaned = -0.00940954 Jy ! Component: 1550 - total flux cleaned = -0.00944438 Jy ! Component: 1600 - total flux cleaned = -0.00954745 Jy ! Component: 1650 - total flux cleaned = -0.00954669 Jy ! Component: 1700 - total flux cleaned = -0.00951271 Jy ! Component: 1750 - total flux cleaned = -0.00954619 Jy ! Component: 1800 - total flux cleaned = -0.00957946 Jy ! Component: 1850 - total flux cleaned = -0.0095798 Jy ! Component: 1900 - total flux cleaned = -0.0096772 Jy ! Component: 1950 - total flux cleaned = -0.00970966 Jy ! Component: 2000 - total flux cleaned = -0.00967762 Jy ! Total flux subtracted in 2048 components = -0.00974116 Jy ! Clean residual min=-0.002119 max=0.002240 Jy/beam ! Clean residual mean=0.000010 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 1.32621 Jy keep ! Adding 124 model components to the UV plane model. ! The established model now contains 231 components and 1.32621 Jy ![Exited script file: muppet] wmap "J1522-2730_S_2004_04_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.889 x 8.28 at -2.373 degrees (North through East) ! Clean map min=-0.0054324 max=1.2769 Jy/beam ! Writing clean map to FITS file: J1522-2730_S_2004_04_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.27691 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000597267 device "J1522-2730_S_2004_04_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J1522-2730_S_2004_04_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.140323 0.140323 0.280646 0.561291 1.12258 2.24516 4.49033 8.98066 17.9613 35.9226 71.8453 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.276 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.889 x 8.28 at -2.373 degrees (North through East) ! Clean map min=-0.0054324 max=1.2769 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1522-2730_S_2004_04_30_yyk\_map.gif/gif" ! Attempting to open device: 'J1522-2730_S_2004_04_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1522-2730_S_2004_04_30_yyk_uvs.log closed on Wed Dec 7 00:33:21 2005