! Started logfile: J1513-1012_S_2004_04_30_yyk_uvs.log on Wed Dec 7 00:33:00 2005 obs J1513-1012_S_2004_04_30_yyk_uve.fits ! Reading UV FITS file: J1513-1012_S_2004_04_30_yyk_uve.fits ! AN table 1: 5 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.893333 visibilities/baseline/integration-bin. ! Found source: J1513-1012 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1627 lines of history. ! ! Reading 804 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1513-1012_S_2004_04_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.65059 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.380016Jy sigma=6.691783 ! Fit after self-cal, rms=0.379820Jy sigma=6.691972 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.775 mas, bmaj=6.855 mas, bpa=-6.935 degrees ! Estimated noise=1.99098 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.544995 Jy ! Component: 100 - total flux cleaned = 0.647136 Jy ! Total flux subtracted in 100 components = 0.647136 Jy ! Clean residual min=-0.023844 max=0.031291 Jy/beam ! Clean residual mean=0.000069 rms=0.006687 Jy/beam ! Combined flux in latest and established models = 0.647136 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.647136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100912Jy sigma=1.788310 ! Fit after self-cal, rms=0.100377Jy sigma=1.782319 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.268 mas, bmaj=8.174 mas, bpa=-7.113 degrees ! Estimated noise=1.52684 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0545377 Jy ! Component: 100 - total flux cleaned = 0.0744785 Jy ! Component: 150 - total flux cleaned = 0.0834898 Jy ! Component: 200 - total flux cleaned = 0.0878028 Jy ! Total flux subtracted in 200 components = 0.0878028 Jy ! Clean residual min=-0.013658 max=0.021509 Jy/beam ! Clean residual mean=0.000062 rms=0.004819 Jy/beam ! Combined flux in latest and established models = 0.734939 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 36 components and 0.734939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082379Jy sigma=1.392482 ! Fit after self-cal, rms=0.082297Jy sigma=1.391405 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00612 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 HN 0.97 KP 0.96 ! LA 1.08 MK 1.00 NL 1.01 OV 0.98 ! PT 1.00 SC 0.94 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.989089 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.07 KP 1.00 ! LA 1.05 MK 1.04 NL 1.03 OV 1.01 ! PT 0.91 SC 1.00 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.998868 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.91 HN 0.99 KP 0.98 ! LA 0.96 MK 1.03 NL 1.07 OV 1.04 ! PT 1.01 SC 1.02 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.01606 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.93 HN 0.98 KP 0.90 ! LA 1.00* MK 0.94 NL 1.00 OV 1.00* ! PT 0.98 SC 1.13 ! ! ! Fit before self-cal, rms=0.082297Jy sigma=1.391405 ! Fit after self-cal, rms=0.072329Jy sigma=1.212436 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072329Jy sigma=1.212436 ! Fit after self-cal, rms=0.072338Jy sigma=1.212147 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.29 mas, bmaj=8.23 mas, bpa=-7.083 degrees ! Estimated noise=1.52401 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (14, -4.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0237361 Jy ! Component: 100 - total flux cleaned = 0.0303566 Jy ! Component: 150 - total flux cleaned = 0.033186 Jy ! Component: 200 - total flux cleaned = 0.0347964 Jy ! Total flux subtracted in 200 components = 0.0347964 Jy ! Clean residual min=-0.006968 max=0.009602 Jy/beam ! Clean residual mean=0.000032 rms=0.002198 Jy/beam ! Combined flux in latest and established models = 0.769735 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 64 components and 0.769735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067840Jy sigma=1.100680 ! Fit after self-cal, rms=0.067565Jy sigma=1.095921 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067565Jy sigma=1.095921 ! Fit after self-cal, rms=0.065707Jy sigma=1.057544 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00239229 Jy ! Component: 100 - total flux cleaned = 0.00302914 Jy ! Component: 150 - total flux cleaned = 0.00343721 Jy ! Component: 200 - total flux cleaned = 0.00378857 Jy ! Total flux subtracted in 200 components = 0.00378857 Jy ! Clean residual min=-0.007004 max=0.008395 Jy/beam ! Clean residual mean=0.000025 rms=0.001985 Jy/beam ! Combined flux in latest and established models = 0.773524 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 79 components and 0.773524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065264Jy sigma=1.047247 ! Fit after self-cal, rms=0.065185Jy sigma=1.043521 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.29 x 8.23 at -7.083 degrees (North through East) ! Clean map min=-0.0070269 max=0.64334 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065185Jy sigma=1.043521 ! Fit after self-cal, rms=0.063343Jy sigma=1.012804 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063343Jy sigma=1.012804 ! Fit after self-cal, rms=0.063374Jy sigma=1.012479 ! Inverting map and beam ! Estimated beam: bmin=3.289 mas, bmaj=8.237 mas, bpa=-7.066 degrees ! Estimated noise=1.52021 mJy/beam. ! Added new window around map position (23.5, 2.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00851133 Jy ! Component: 100 - total flux cleaned = 0.00925351 Jy ! Component: 150 - total flux cleaned = 0.00994516 Jy ! Component: 200 - total flux cleaned = 0.0105165 Jy ! Total flux subtracted in 200 components = 0.0105165 Jy ! Clean residual min=-0.005280 max=0.005692 Jy/beam ! Clean residual mean=0.000007 rms=0.001489 Jy/beam ! Combined flux in latest and established models = 0.78404 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 105 components and 0.78404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062326Jy sigma=0.990812 ! Fit after self-cal, rms=0.062317Jy sigma=0.990195 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062317Jy sigma=0.990195 ! Fit after self-cal, rms=0.061327Jy sigma=0.969779 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061327Jy sigma=0.969779 ! Fit after self-cal, rms=0.061329Jy sigma=0.969763 ! Inverting map and beam ! Estimated beam: bmin=3.291 mas, bmaj=8.25 mas, bpa=-7.116 degrees ! Estimated noise=1.51844 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000828797 Jy ! Component: 100 - total flux cleaned = 0.00062957 Jy ! Component: 150 - total flux cleaned = 0.000450235 Jy ! Component: 200 - total flux cleaned = 0.000201139 Jy ! Total flux subtracted in 200 components = 0.000201139 Jy ! Clean residual min=-0.004930 max=0.005449 Jy/beam ! Clean residual mean=0.000010 rms=0.001412 Jy/beam ! Combined flux in latest and established models = 0.784241 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 122 components and 0.784242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061070Jy sigma=0.965345 ! Fit after self-cal, rms=0.061067Jy sigma=0.965154 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.795 mas, bmaj=15.04 mas, bpa=-8.965 degrees ! Estimated noise=1.94688 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000988321 Jy ! Component: 100 - total flux cleaned = 0.000540478 Jy ! Component: 150 - total flux cleaned = 8.80672e-05 Jy ! Component: 200 - total flux cleaned = -0.000150553 Jy ! Total flux subtracted in 200 components = -0.000150553 Jy ! Clean residual min=-0.005074 max=0.004204 Jy/beam ! Clean residual mean=0.000019 rms=0.001375 Jy/beam ! Combined flux in latest and established models = 0.784091 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 144 components and 0.784091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061091Jy sigma=0.965029 ! Fit after self-cal, rms=0.061017Jy sigma=0.963510 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.781 mas, bmaj=6.883 mas, bpa=-6.953 degrees ! Estimated noise=1.98465 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.543511 Jy ! Component: 100 - total flux cleaned = 0.645961 Jy ! Component: 150 - total flux cleaned = 0.688582 Jy ! Component: 200 - total flux cleaned = 0.712495 Jy ! Total flux subtracted in 200 components = 0.712495 Jy ! Clean residual min=-0.010678 max=0.017119 Jy/beam ! Clean residual mean=0.000033 rms=0.003385 Jy/beam ! Combined flux in latest and established models = 0.712495 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.712495 Jy ! Inverting map and beam ! Estimated beam: bmin=3.291 mas, bmaj=8.25 mas, bpa=-7.116 degrees ! Estimated noise=1.51844 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, 1). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0258189 Jy ! Component: 100 - total flux cleaned = 0.0411748 Jy ! Component: 150 - total flux cleaned = 0.0520055 Jy ! Component: 200 - total flux cleaned = 0.0598699 Jy ! Total flux subtracted in 200 components = 0.0598699 Jy ! Clean residual min=-0.006550 max=0.006108 Jy/beam ! Clean residual mean=0.000026 rms=0.001681 Jy/beam ! Combined flux in latest and established models = 0.772365 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 82 components and 0.772365 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.795 mas, bmaj=15.04 mas, bpa=-8.965 degrees ! Estimated noise=1.94688 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00525342 Jy ! Component: 100 - total flux cleaned = 0.00700278 Jy ! Component: 150 - total flux cleaned = 0.00814164 Jy ! Component: 200 - total flux cleaned = 0.00852354 Jy ! Total flux subtracted in 200 components = 0.00852354 Jy ! Clean residual min=-0.004911 max=0.003989 Jy/beam ! Clean residual mean=0.000028 rms=0.001371 Jy/beam ! Combined flux in latest and established models = 0.780889 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 124 components and 0.780888 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.291 mas, bmaj=8.25 mas, bpa=-7.116 degrees ! Estimated noise=1.51844 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148259 Jy ! Component: 100 - total flux cleaned = 0.00197355 Jy ! Component: 150 - total flux cleaned = 0.00219711 Jy ! Component: 200 - total flux cleaned = 0.00219673 Jy ! Total flux subtracted in 200 components = 0.00219673 Jy ! Clean residual min=-0.004648 max=0.004919 Jy/beam ! Clean residual mean=0.000010 rms=0.001256 Jy/beam ! Combined flux in latest and established models = 0.783085 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 148 components and 0.783085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060673Jy sigma=0.956248 ! Fit after self-cal, rms=0.060625Jy sigma=0.955048 wmodel J1513-1012_S_2004_04_30_yyk\_map.mod ! Writing 148 model components to file: J1513-1012_S_2004_04_30_yyk_map.mod wobs J1513-1012_S_2004_04_30_yyk\_uvs.fits ! Writing UV FITS file: J1513-1012_S_2004_04_30_yyk_uvs.fits wwins J1513-1012_S_2004_04_30_yyk\_map.win ! wwins: Wrote 4 windows to J1513-1012_S_2004_04_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000877102 Jy ! Component: 100 - total flux cleaned = 0.00111439 Jy ! Component: 150 - total flux cleaned = 0.00118514 Jy ! Component: 200 - total flux cleaned = 0.00111336 Jy ! Component: 250 - total flux cleaned = 0.000918892 Jy ! Component: 300 - total flux cleaned = 0.000919409 Jy ! Component: 350 - total flux cleaned = 0.00103639 Jy ! Component: 400 - total flux cleaned = 0.00109188 Jy ! Component: 450 - total flux cleaned = 0.00125618 Jy ! Component: 500 - total flux cleaned = 0.0014139 Jy ! Component: 550 - total flux cleaned = 0.0014143 Jy ! Component: 600 - total flux cleaned = 0.00136473 Jy ! Component: 650 - total flux cleaned = 0.00122034 Jy ! Component: 700 - total flux cleaned = 0.00112561 Jy ! Component: 750 - total flux cleaned = 0.00103333 Jy ! Component: 800 - total flux cleaned = 0.00112275 Jy ! Component: 850 - total flux cleaned = 0.00121009 Jy ! Component: 900 - total flux cleaned = 0.00129518 Jy ! Component: 950 - total flux cleaned = 0.0014205 Jy ! Component: 1000 - total flux cleaned = 0.00154283 Jy ! Component: 1050 - total flux cleaned = 0.00166418 Jy ! Component: 1100 - total flux cleaned = 0.00182261 Jy ! Component: 1150 - total flux cleaned = 0.00186114 Jy ! Component: 1200 - total flux cleaned = 0.00197578 Jy ! Component: 1250 - total flux cleaned = 0.00193816 Jy ! Component: 1300 - total flux cleaned = 0.00190135 Jy ! Component: 1350 - total flux cleaned = 0.00182938 Jy ! Component: 1400 - total flux cleaned = 0.00179461 Jy ! Component: 1450 - total flux cleaned = 0.00172537 Jy ! Component: 1500 - total flux cleaned = 0.00162274 Jy ! Component: 1550 - total flux cleaned = 0.00158858 Jy ! Component: 1600 - total flux cleaned = 0.00135567 Jy ! Component: 1650 - total flux cleaned = 0.0013231 Jy ! Component: 1700 - total flux cleaned = 0.00122616 Jy ! Component: 1750 - total flux cleaned = 0.00113027 Jy ! Component: 1800 - total flux cleaned = 0.000973048 Jy ! Component: 1850 - total flux cleaned = 0.000818325 Jy ! Component: 1900 - total flux cleaned = 0.000727013 Jy ! Component: 1950 - total flux cleaned = 0.000606314 Jy ! Component: 2000 - total flux cleaned = 0.000547548 Jy ! Total flux subtracted in 2048 components = 0.000518455 Jy ! Clean residual min=-0.001846 max=0.001723 Jy/beam ! Clean residual mean=0.000005 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.783604 Jy keep ! Adding 129 model components to the UV plane model. ! The established model now contains 277 components and 0.783604 Jy ![Exited script file: muppet] wmap "J1513-1012_S_2004_04_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.291 x 8.25 at -7.116 degrees (North through East) ! Clean map min=-0.0036165 max=0.64452 Jy/beam ! Writing clean map to FITS file: J1513-1012_S_2004_04_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.644516 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000582082 device "J1513-1012_S_2004_04_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J1513-1012_S_2004_04_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.270939 0.270939 0.541878 1.08376 2.16751 4.33503 8.67005 17.3401 34.6802 69.3604 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.644 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.291 x 8.25 at -7.116 degrees (North through East) ! Clean map min=-0.0036165 max=0.64452 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1513-1012_S_2004_04_30_yyk\_map.gif/gif" ! Attempting to open device: 'J1513-1012_S_2004_04_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1513-1012_S_2004_04_30_yyk_uvs.log closed on Wed Dec 7 00:33:04 2005