! Started logfile: J1508-3036_S_2004_04_30_yyk_uvs.log on Wed Dec 7 00:32:17 2005 obs J1508-3036_S_2004_04_30_yyk_uve.fits ! Reading UV FITS file: J1508-3036_S_2004_04_30_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.95 visibilities/baseline/integration-bin. ! Found source: J1508-3036 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1631 lines of history. ! ! Reading 684 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1508-3036_S_2004_04_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.323003 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.696536Jy sigma=11.554387 ! Fit after self-cal, rms=0.696529Jy sigma=11.552494 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.671 mas, bmaj=6.8 mas, bpa=-1.408 degrees ! Estimated noise=2.60016 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.256835 Jy ! Component: 100 - total flux cleaned = 0.306793 Jy ! Total flux subtracted in 100 components = 0.306793 Jy ! Clean residual min=-0.013379 max=0.019166 Jy/beam ! Clean residual mean=-0.000001 rms=0.004531 Jy/beam ! Combined flux in latest and established models = 0.306793 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.306793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086097Jy sigma=1.204712 ! Fit after self-cal, rms=0.086051Jy sigma=1.204042 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.183 mas, bmaj=8.23 mas, bpa=-3.928 degrees ! Estimated noise=2.02616 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0203783 Jy ! Component: 100 - total flux cleaned = 0.026439 Jy ! Component: 150 - total flux cleaned = 0.0275766 Jy ! Component: 200 - total flux cleaned = 0.0276493 Jy ! Total flux subtracted in 200 components = 0.0276493 Jy ! Clean residual min=-0.011166 max=0.013368 Jy/beam ! Clean residual mean=-0.000016 rms=0.004037 Jy/beam ! Combined flux in latest and established models = 0.334442 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 33 components and 0.334442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082906Jy sigma=1.142936 ! Fit after self-cal, rms=0.082894Jy sigma=1.142798 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00593 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.02 HN 1.00* KP 0.95 ! LA 1.09 MK 0.98 NL 0.99 OV 1.00 ! PT 0.95 SC 0.89 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.0018 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.92 HN 1.00* KP 1.04 ! LA 1.07 MK 0.98 NL 1.05 OV 0.97 ! PT 0.92 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.02532 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.00* KP 0.90 ! LA 1.00* MK 0.95 NL 1.05 OV 0.85 ! PT 0.93 SC 1.14 ! ! ! Fit before self-cal, rms=0.082894Jy sigma=1.142798 ! Fit after self-cal, rms=0.078565Jy sigma=1.064106 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078565Jy sigma=1.064106 ! Fit after self-cal, rms=0.078583Jy sigma=1.064070 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.17 mas, bmaj=8.193 mas, bpa=-3.723 degrees ! Estimated noise=2.00412 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00105584 Jy ! Component: 100 - total flux cleaned = -0.00120818 Jy ! Component: 150 - total flux cleaned = -0.00127155 Jy ! Component: 200 - total flux cleaned = -0.00133162 Jy ! Total flux subtracted in 200 components = -0.00133162 Jy ! Clean residual min=-0.008203 max=0.009564 Jy/beam ! Clean residual mean=0.000058 rms=0.002881 Jy/beam ! Combined flux in latest and established models = 0.333111 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 41 components and 0.333111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078440Jy sigma=1.061799 ! Fit after self-cal, rms=0.078433Jy sigma=1.061737 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078433Jy sigma=1.061737 ! Fit after self-cal, rms=0.077055Jy sigma=1.032583 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000357724 Jy ! Component: 100 - total flux cleaned = 0.00025539 Jy ! Component: 150 - total flux cleaned = 0.000208302 Jy ! Component: 200 - total flux cleaned = 0.000208286 Jy ! Total flux subtracted in 200 components = 0.000208286 Jy ! Clean residual min=-0.008114 max=0.009403 Jy/beam ! Clean residual mean=0.000065 rms=0.002878 Jy/beam ! Combined flux in latest and established models = 0.333319 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 44 components and 0.333319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076974Jy sigma=1.031657 ! Fit after self-cal, rms=0.077003Jy sigma=1.028296 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.17 x 8.193 at -3.723 degrees (North through East) ! Clean map min=-0.007888 max=0.3043 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077003Jy sigma=1.028296 ! Fit after self-cal, rms=0.075652Jy sigma=1.020533 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075652Jy sigma=1.020533 ! Fit after self-cal, rms=0.075788Jy sigma=1.019901 ! Inverting map and beam ! Estimated beam: bmin=3.156 mas, bmaj=8.172 mas, bpa=-3.587 degrees ! Estimated noise=1.97167 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00424192 Jy ! Component: 100 - total flux cleaned = -0.00446771 Jy ! Component: 150 - total flux cleaned = -0.0045132 Jy ! Component: 200 - total flux cleaned = -0.00455564 Jy ! Total flux subtracted in 200 components = -0.00455564 Jy ! Clean residual min=-0.007680 max=0.008994 Jy/beam ! Clean residual mean=0.000077 rms=0.002696 Jy/beam ! Combined flux in latest and established models = 0.328763 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 46 components and 0.328763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075596Jy sigma=1.016056 ! Fit after self-cal, rms=0.075687Jy sigma=1.015900 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075687Jy sigma=1.015900 ! Fit after self-cal, rms=0.074314Jy sigma=1.002788 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074314Jy sigma=1.002788 ! Fit after self-cal, rms=0.074370Jy sigma=1.002738 ! Inverting map and beam ! Estimated beam: bmin=3.154 mas, bmaj=8.173 mas, bpa=-3.52 degrees ! Estimated noise=1.94841 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00332251 Jy ! Component: 100 - total flux cleaned = -0.00358858 Jy ! Component: 150 - total flux cleaned = -0.00362789 Jy ! Component: 200 - total flux cleaned = -0.00366303 Jy ! Total flux subtracted in 200 components = -0.00366303 Jy ! Clean residual min=-0.007263 max=0.008960 Jy/beam ! Clean residual mean=0.000097 rms=0.002620 Jy/beam ! Combined flux in latest and established models = 0.3251 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 47 components and 0.3251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074227Jy sigma=1.000236 ! Fit after self-cal, rms=0.074253Jy sigma=1.000211 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.139 mas, bmaj=25.19 mas, bpa=0.6234 degrees ! Estimated noise=2.46667 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113109 Jy ! Component: 100 - total flux cleaned = 0.0012656 Jy ! Component: 150 - total flux cleaned = 0.00139598 Jy ! Component: 200 - total flux cleaned = 0.00152121 Jy ! Total flux subtracted in 200 components = 0.00152121 Jy ! Clean residual min=-0.008815 max=0.009533 Jy/beam ! Clean residual mean=0.000197 rms=0.003785 Jy/beam ! Combined flux in latest and established models = 0.326622 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 52 components and 0.326622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074395Jy sigma=1.000858 ! Fit after self-cal, rms=0.074374Jy sigma=1.000523 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.651 mas, bmaj=6.771 mas, bpa=-1.279 degrees ! Estimated noise=2.51747 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.249551 Jy ! Component: 100 - total flux cleaned = 0.29936 Jy ! Component: 150 - total flux cleaned = 0.313146 Jy ! Component: 200 - total flux cleaned = 0.317126 Jy ! Total flux subtracted in 200 components = 0.317126 Jy ! Clean residual min=-0.010156 max=0.012332 Jy/beam ! Clean residual mean=0.000064 rms=0.003249 Jy/beam ! Combined flux in latest and established models = 0.317126 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.317126 Jy ! Inverting map and beam ! Estimated beam: bmin=3.154 mas, bmaj=8.173 mas, bpa=-3.52 degrees ! Estimated noise=1.94841 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00664187 Jy ! Component: 100 - total flux cleaned = 0.00815884 Jy ! Component: 150 - total flux cleaned = 0.00815948 Jy ! Component: 200 - total flux cleaned = 0.00816151 Jy ! Total flux subtracted in 200 components = 0.00816151 Jy ! Clean residual min=-0.007195 max=0.009045 Jy/beam ! Clean residual mean=0.000094 rms=0.002642 Jy/beam ! Combined flux in latest and established models = 0.325288 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 36 components and 0.325288 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.139 mas, bmaj=25.19 mas, bpa=0.6234 degrees ! Estimated noise=2.46667 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149552 Jy ! Component: 100 - total flux cleaned = 0.0016463 Jy ! Component: 150 - total flux cleaned = 0.00172053 Jy ! Component: 200 - total flux cleaned = 0.00185131 Jy ! Total flux subtracted in 200 components = 0.00185131 Jy ! Clean residual min=-0.008719 max=0.009429 Jy/beam ! Clean residual mean=0.000196 rms=0.003764 Jy/beam ! Combined flux in latest and established models = 0.327139 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 41 components and 0.327139 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.154 mas, bmaj=8.173 mas, bpa=-3.52 degrees ! Estimated noise=1.94841 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.001079 Jy ! Component: 100 - total flux cleaned = -0.00128508 Jy ! Component: 150 - total flux cleaned = -0.00140539 Jy ! Component: 200 - total flux cleaned = -0.00151235 Jy ! Total flux subtracted in 200 components = -0.00151235 Jy ! Clean residual min=-0.007186 max=0.008943 Jy/beam ! Clean residual mean=0.000096 rms=0.002622 Jy/beam ! Combined flux in latest and established models = 0.325627 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 49 components and 0.325627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074334Jy sigma=1.001410 ! Fit after self-cal, rms=0.074354Jy sigma=1.001372 wmodel J1508-3036_S_2004_04_30_yyk\_map.mod ! Writing 49 model components to file: J1508-3036_S_2004_04_30_yyk_map.mod wobs J1508-3036_S_2004_04_30_yyk\_uvs.fits ! Writing UV FITS file: J1508-3036_S_2004_04_30_yyk_uvs.fits wwins J1508-3036_S_2004_04_30_yyk\_map.win ! wwins: Wrote 1 windows to J1508-3036_S_2004_04_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00357508 Jy ! Component: 100 - total flux cleaned = 0.00478257 Jy ! Component: 150 - total flux cleaned = 0.00576735 Jy ! Component: 200 - total flux cleaned = 0.00658586 Jy ! Component: 250 - total flux cleaned = 0.00725064 Jy ! Component: 300 - total flux cleaned = 0.00756836 Jy ! Component: 350 - total flux cleaned = 0.00817705 Jy ! Component: 400 - total flux cleaned = 0.00846801 Jy ! Component: 450 - total flux cleaned = 0.00856275 Jy ! Component: 500 - total flux cleaned = 0.00883277 Jy ! Component: 550 - total flux cleaned = 0.00900355 Jy ! Component: 600 - total flux cleaned = 0.00924857 Jy ! Component: 650 - total flux cleaned = 0.0093246 Jy ! Component: 700 - total flux cleaned = 0.00939964 Jy ! Component: 750 - total flux cleaned = 0.00902427 Jy ! Component: 800 - total flux cleaned = 0.00880814 Jy ! Component: 850 - total flux cleaned = 0.00874073 Jy ! Component: 900 - total flux cleaned = 0.00874285 Jy ! Component: 950 - total flux cleaned = 0.00861062 Jy ! Component: 1000 - total flux cleaned = 0.00848268 Jy ! Component: 1050 - total flux cleaned = 0.00842155 Jy ! Component: 1100 - total flux cleaned = 0.00842168 Jy ! Component: 1150 - total flux cleaned = 0.00830092 Jy ! Component: 1200 - total flux cleaned = 0.00807002 Jy ! Component: 1250 - total flux cleaned = 0.00801413 Jy ! Component: 1300 - total flux cleaned = 0.00795855 Jy ! Component: 1350 - total flux cleaned = 0.00790625 Jy ! Component: 1400 - total flux cleaned = 0.00780125 Jy ! Component: 1450 - total flux cleaned = 0.0077511 Jy ! Component: 1500 - total flux cleaned = 0.00770032 Jy ! Component: 1550 - total flux cleaned = 0.00755394 Jy ! Component: 1600 - total flux cleaned = 0.00741077 Jy ! Component: 1650 - total flux cleaned = 0.00713108 Jy ! Component: 1700 - total flux cleaned = 0.00699339 Jy ! Component: 1750 - total flux cleaned = 0.00668052 Jy ! Component: 1800 - total flux cleaned = 0.00637544 Jy ! Component: 1850 - total flux cleaned = 0.00620371 Jy ! Component: 1900 - total flux cleaned = 0.00586794 Jy ! Component: 1950 - total flux cleaned = 0.00562242 Jy ! Component: 2000 - total flux cleaned = 0.00534138 Jy ! Total flux subtracted in 2048 components = 0.00506449 Jy ! Clean residual min=-0.002342 max=0.002698 Jy/beam ! Clean residual mean=-0.000030 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.330691 Jy keep ! Adding 144 model components to the UV plane model. ! The established model now contains 193 components and 0.330691 Jy ![Exited script file: muppet] wmap "J1508-3036_S_2004_04_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.154 x 8.173 at -3.52 degrees (North through East) ! Clean map min=-0.0053819 max=0.29333 Jy/beam ! Writing clean map to FITS file: J1508-3036_S_2004_04_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.293335 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000814994 device "J1508-3036_S_2004_04_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J1508-3036_S_2004_04_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.833512 0.833512 1.66702 3.33405 6.6681 13.3362 26.6724 53.3448 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0024 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.293 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.154 x 8.173 at -3.52 degrees (North through East) ! Clean map min=-0.0053819 max=0.29333 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1508-3036_S_2004_04_30_yyk\_map.gif/gif" ! Attempting to open device: 'J1508-3036_S_2004_04_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1508-3036_S_2004_04_30_yyk_uvs.log closed on Wed Dec 7 00:32:21 2005