! Started logfile: J1454-3747_S_2004_05_27_yyk_uvs.log on Wed Dec 7 00:31:47 2005 obs J1454-3747_S_2004_05_27_yyk_uve.fits ! Reading UV FITS file: J1454-3747_S_2004_05_27_yyk_uve.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.80202 visibilities/baseline/integration-bin. ! Found source: J1454-3747 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1388 lines of history. ! ! Reading 1588 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1454-3747_S_2004_05_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.54335 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.521228Jy sigma=6.322845 ! Fit after self-cal, rms=0.521038Jy sigma=6.318569 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.262 mas, bmaj=6.153 mas, bpa=-7.711 degrees ! Estimated noise=2.36881 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.39784 Jy ! Component: 100 - total flux cleaned = 0.49125 Jy ! Total flux subtracted in 100 components = 0.49125 Jy ! Clean residual min=-0.023047 max=0.039894 Jy/beam ! Clean residual mean=0.000144 rms=0.007530 Jy/beam ! Combined flux in latest and established models = 0.49125 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.49125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167638Jy sigma=2.057428 ! Fit after self-cal, rms=0.167608Jy sigma=2.057086 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.971 mas, bmaj=7.977 mas, bpa=-6.618 degrees ! Estimated noise=1.61943 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0948609 Jy ! Component: 100 - total flux cleaned = 0.129652 Jy ! Component: 150 - total flux cleaned = 0.143083 Jy ! Component: 200 - total flux cleaned = 0.14534 Jy ! Total flux subtracted in 200 components = 0.14534 Jy ! Clean residual min=-0.022271 max=0.049845 Jy/beam ! Clean residual mean=-0.000203 rms=0.009739 Jy/beam ! Combined flux in latest and established models = 0.63659 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 33 components and 0.63659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139588Jy sigma=1.574340 ! Fit after self-cal, rms=0.139430Jy sigma=1.573269 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.139430Jy sigma=1.573269 ! Fit after self-cal, rms=0.139430Jy sigma=1.573269 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139430Jy sigma=1.573269 ! Fit after self-cal, rms=0.139431Jy sigma=1.573268 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.971 mas, bmaj=7.977 mas, bpa=-6.618 degrees ! Estimated noise=1.61943 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.5, -8.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.052524 Jy ! Component: 100 - total flux cleaned = 0.0604493 Jy ! Component: 150 - total flux cleaned = 0.0614013 Jy ! Component: 200 - total flux cleaned = 0.0614453 Jy ! Total flux subtracted in 200 components = 0.0614453 Jy ! Clean residual min=-0.016585 max=0.028353 Jy/beam ! Clean residual mean=-0.000334 rms=0.006126 Jy/beam ! Combined flux in latest and established models = 0.698036 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 65 components and 0.698036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125247Jy sigma=1.376808 ! Fit after self-cal, rms=0.123033Jy sigma=1.343230 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123033Jy sigma=1.343230 ! Fit after self-cal, rms=0.120444Jy sigma=1.308960 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145995 Jy ! Component: 100 - total flux cleaned = 0.0149315 Jy ! Component: 150 - total flux cleaned = 0.0151916 Jy ! Component: 200 - total flux cleaned = 0.0153935 Jy ! Total flux subtracted in 200 components = 0.0153935 Jy ! Clean residual min=-0.015399 max=0.018266 Jy/beam ! Clean residual mean=-0.000359 rms=0.005031 Jy/beam ! Combined flux in latest and established models = 0.713429 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 83 components and 0.713429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118744Jy sigma=1.283504 ! Fit after self-cal, rms=0.118265Jy sigma=1.274704 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.971 x 7.977 at -6.618 degrees (North through East) ! Clean map min=-0.014297 max=0.47917 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118265Jy sigma=1.274704 ! Fit after self-cal, rms=0.109135Jy sigma=1.139568 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109135Jy sigma=1.139568 ! Fit after self-cal, rms=0.109196Jy sigma=1.139191 ! Inverting map and beam ! Estimated beam: bmin=2.963 mas, bmaj=7.963 mas, bpa=-6.362 degrees ! Estimated noise=1.60597 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 9.08943e-05 Jy ! Component: 100 - total flux cleaned = 0.000103779 Jy ! Component: 150 - total flux cleaned = -2.81628e-05 Jy ! Component: 200 - total flux cleaned = -2.78895e-05 Jy ! Total flux subtracted in 200 components = -2.78895e-05 Jy ! Clean residual min=-0.009996 max=0.010806 Jy/beam ! Clean residual mean=0.000094 rms=0.003295 Jy/beam ! Combined flux in latest and established models = 0.713401 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 107 components and 0.713401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108910Jy sigma=1.132981 ! Fit after self-cal, rms=0.108873Jy sigma=1.132233 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108873Jy sigma=1.132233 ! Fit after self-cal, rms=0.107719Jy sigma=1.115182 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107719Jy sigma=1.115182 ! Fit after self-cal, rms=0.107734Jy sigma=1.115165 ! Inverting map and beam ! Estimated beam: bmin=2.971 mas, bmaj=7.973 mas, bpa=-6.138 degrees ! Estimated noise=1.60125 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000848414 Jy ! Component: 100 - total flux cleaned = -0.000840666 Jy ! Component: 150 - total flux cleaned = -0.000838368 Jy ! Component: 200 - total flux cleaned = -0.000840296 Jy ! Total flux subtracted in 200 components = -0.000840296 Jy ! Clean residual min=-0.009335 max=0.010368 Jy/beam ! Clean residual mean=0.000091 rms=0.003153 Jy/beam ! Combined flux in latest and established models = 0.712561 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 116 components and 0.712561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107560Jy sigma=1.111696 ! Fit after self-cal, rms=0.107540Jy sigma=1.111407 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.113 mas, bmaj=28.45 mas, bpa=-2.527 degrees ! Estimated noise=2.10358 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00372033 Jy ! Component: 100 - total flux cleaned = 0.0040533 Jy ! Component: 150 - total flux cleaned = 0.00425988 Jy ! Component: 200 - total flux cleaned = 0.00435646 Jy ! Total flux subtracted in 200 components = 0.00435646 Jy ! Clean residual min=-0.010640 max=0.012696 Jy/beam ! Clean residual mean=0.000159 rms=0.004496 Jy/beam ! Combined flux in latest and established models = 0.716917 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 122 components and 0.716917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107360Jy sigma=1.111317 ! Fit after self-cal, rms=0.107324Jy sigma=1.110855 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.26 mas, bmaj=6.145 mas, bpa=-7.453 degrees ! Estimated noise=2.36029 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.396601 Jy ! Component: 100 - total flux cleaned = 0.492813 Jy ! Component: 150 - total flux cleaned = 0.548358 Jy ! Component: 200 - total flux cleaned = 0.584855 Jy ! Total flux subtracted in 200 components = 0.584855 Jy ! Clean residual min=-0.015620 max=0.021053 Jy/beam ! Clean residual mean=0.000220 rms=0.004560 Jy/beam ! Combined flux in latest and established models = 0.584855 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.584855 Jy ! Inverting map and beam ! Estimated beam: bmin=2.971 mas, bmaj=7.973 mas, bpa=-6.138 degrees ! Estimated noise=1.60125 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0588411 Jy ! Component: 100 - total flux cleaned = 0.0892323 Jy ! Component: 150 - total flux cleaned = 0.106289 Jy ! Component: 200 - total flux cleaned = 0.116136 Jy ! Total flux subtracted in 200 components = 0.116136 Jy ! Clean residual min=-0.010071 max=0.011069 Jy/beam ! Clean residual mean=0.000084 rms=0.003469 Jy/beam ! Combined flux in latest and established models = 0.700991 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 83 components and 0.700991 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.113 mas, bmaj=28.45 mas, bpa=-2.527 degrees ! Estimated noise=2.10358 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111297 Jy ! Component: 100 - total flux cleaned = 0.0149115 Jy ! Component: 150 - total flux cleaned = 0.0153413 Jy ! Component: 200 - total flux cleaned = 0.015541 Jy ! Total flux subtracted in 200 components = 0.015541 Jy ! Clean residual min=-0.010500 max=0.012728 Jy/beam ! Clean residual mean=0.000154 rms=0.004537 Jy/beam ! Combined flux in latest and established models = 0.716532 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 108 components and 0.716532 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.971 mas, bmaj=7.973 mas, bpa=-6.138 degrees ! Estimated noise=1.60125 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00267696 Jy ! Component: 100 - total flux cleaned = -0.0029315 Jy ! Component: 150 - total flux cleaned = -0.00293292 Jy ! Component: 200 - total flux cleaned = -0.00292759 Jy ! Total flux subtracted in 200 components = -0.00292759 Jy ! Clean residual min=-0.009250 max=0.009977 Jy/beam ! Clean residual mean=0.000073 rms=0.003059 Jy/beam ! Combined flux in latest and established models = 0.713604 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 122 components and 0.713604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106828Jy sigma=1.105215 ! Fit after self-cal, rms=0.106689Jy sigma=1.104106 wmodel J1454-3747_S_2004_05_27_yyk\_map.mod ! Writing 122 model components to file: J1454-3747_S_2004_05_27_yyk_map.mod wobs J1454-3747_S_2004_05_27_yyk\_uvs.fits ! Writing UV FITS file: J1454-3747_S_2004_05_27_yyk_uvs.fits wwins J1454-3747_S_2004_05_27_yyk\_map.win ! wwins: Wrote 2 windows to J1454-3747_S_2004_05_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00419159 Jy ! Component: 100 - total flux cleaned = 0.0053625 Jy ! Component: 150 - total flux cleaned = 0.00490595 Jy ! Component: 200 - total flux cleaned = 0.00432926 Jy ! Component: 250 - total flux cleaned = 0.00405712 Jy ! Component: 300 - total flux cleaned = 0.00379172 Jy ! Component: 350 - total flux cleaned = 0.00315319 Jy ! Component: 400 - total flux cleaned = 0.00266316 Jy ! Component: 450 - total flux cleaned = 0.00242869 Jy ! Component: 500 - total flux cleaned = 0.00242624 Jy ! Component: 550 - total flux cleaned = 0.0024214 Jy ! Component: 600 - total flux cleaned = 0.00231017 Jy ! Component: 650 - total flux cleaned = 0.00241911 Jy ! Component: 700 - total flux cleaned = 0.00262833 Jy ! Component: 750 - total flux cleaned = 0.00262852 Jy ! Component: 800 - total flux cleaned = 0.00282834 Jy ! Component: 850 - total flux cleaned = 0.00322008 Jy ! Component: 900 - total flux cleaned = 0.00350766 Jy ! Component: 950 - total flux cleaned = 0.00379054 Jy ! Component: 1000 - total flux cleaned = 0.00425356 Jy ! Component: 1050 - total flux cleaned = 0.00488967 Jy ! Component: 1100 - total flux cleaned = 0.00560261 Jy ! Component: 1150 - total flux cleaned = 0.00612828 Jy ! Component: 1200 - total flux cleaned = 0.00664529 Jy ! Component: 1250 - total flux cleaned = 0.00723902 Jy ! Component: 1300 - total flux cleaned = 0.00799036 Jy ! Component: 1350 - total flux cleaned = 0.00864734 Jy ! Component: 1400 - total flux cleaned = 0.00921449 Jy ! Component: 1450 - total flux cleaned = 0.00993227 Jy ! Component: 1500 - total flux cleaned = 0.0105606 Jy ! Component: 1550 - total flux cleaned = 0.0110258 Jy ! Component: 1600 - total flux cleaned = 0.0114845 Jy ! Component: 1650 - total flux cleaned = 0.0121626 Jy ! Component: 1700 - total flux cleaned = 0.0125341 Jy ! Component: 1750 - total flux cleaned = 0.0131945 Jy ! Component: 1800 - total flux cleaned = 0.0134851 Jy ! Component: 1850 - total flux cleaned = 0.013844 Jy ! Component: 1900 - total flux cleaned = 0.0143403 Jy ! Component: 1950 - total flux cleaned = 0.0146907 Jy ! Component: 2000 - total flux cleaned = 0.0152445 Jy ! Total flux subtracted in 2048 components = 0.015587 Jy ! Clean residual min=-0.003491 max=0.004256 Jy/beam ! Clean residual mean=0.000083 rms=0.001526 Jy/beam ! Combined flux in latest and established models = 0.729191 Jy keep ! Adding 147 model components to the UV plane model. ! The established model now contains 269 components and 0.729191 Jy ![Exited script file: muppet] wmap "J1454-3747_S_2004_05_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.971 x 7.973 at -6.138 degrees (North through East) ! Clean map min=-0.0072065 max=0.48096 Jy/beam ! Writing clean map to FITS file: J1454-3747_S_2004_05_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.480962 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00154397 device "J1454-3747_S_2004_05_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J1454-3747_S_2004_05_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.96305 0.96305 1.9261 3.8522 7.7044 15.4088 30.8176 61.6352 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0046 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.48 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.971 x 7.973 at -6.138 degrees (North through East) ! Clean map min=-0.0072065 max=0.48096 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1454-3747_S_2004_05_27_yyk\_map.gif/gif" ! Attempting to open device: 'J1454-3747_S_2004_05_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1454-3747_S_2004_05_27_yyk_uvs.log closed on Wed Dec 7 00:31:51 2005