! Started logfile: J1454-3747_S_2004_04_30_yyk_uvs.log on Wed Dec 7 00:31:43 2005 obs J1454-3747_S_2004_04_30_yyk_uve.fits ! Reading UV FITS file: J1454-3747_S_2004_04_30_yyk_uve.fits ! AN table 1: 6 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.877778 visibilities/baseline/integration-bin. ! Found source: J1454-3747 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1633 lines of history. ! ! Reading 948 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1454-3747_S_2004_04_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.581815 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.481745Jy sigma=6.153099 ! Fit after self-cal, rms=0.481373Jy sigma=6.147275 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.554 mas, bmaj=6.896 mas, bpa=-0.3917 degrees ! Estimated noise=3.28508 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.45839 Jy ! Component: 100 - total flux cleaned = 0.559008 Jy ! Total flux subtracted in 100 components = 0.559008 Jy ! Clean residual min=-0.031312 max=0.057930 Jy/beam ! Clean residual mean=-0.000048 rms=0.011924 Jy/beam ! Combined flux in latest and established models = 0.559008 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.559008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157983Jy sigma=2.067157 ! Fit after self-cal, rms=0.158144Jy sigma=2.066387 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.165 mas, bmaj=8.574 mas, bpa=-0.885 degrees ! Estimated noise=2.18675 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0800015 Jy ! Component: 100 - total flux cleaned = 0.106333 Jy ! Component: 150 - total flux cleaned = 0.113154 Jy ! Component: 200 - total flux cleaned = 0.114049 Jy ! Total flux subtracted in 200 components = 0.114049 Jy ! Clean residual min=-0.030257 max=0.050499 Jy/beam ! Clean residual mean=-0.000870 rms=0.011409 Jy/beam ! Combined flux in latest and established models = 0.673057 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 33 components and 0.673057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143637Jy sigma=1.680317 ! Fit after self-cal, rms=0.143203Jy sigma=1.678084 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.143203Jy sigma=1.678084 ! Fit after self-cal, rms=0.143203Jy sigma=1.678084 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143203Jy sigma=1.678084 ! Fit after self-cal, rms=0.143204Jy sigma=1.678085 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.165 mas, bmaj=8.574 mas, bpa=-0.885 degrees ! Estimated noise=2.18675 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192372 Jy ! Component: 100 - total flux cleaned = 0.0019094 Jy ! Component: 150 - total flux cleaned = 0.0021707 Jy ! Component: 200 - total flux cleaned = 0.00240225 Jy ! Total flux subtracted in 200 components = 0.00240225 Jy ! Clean residual min=-0.030142 max=0.050328 Jy/beam ! Clean residual mean=-0.000870 rms=0.011291 Jy/beam ! Combined flux in latest and established models = 0.675459 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 35 components and 0.67546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142662Jy sigma=1.668908 ! Fit after self-cal, rms=0.142539Jy sigma=1.668652 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142539Jy sigma=1.668652 ! Fit after self-cal, rms=0.137966Jy sigma=1.624541 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000870613 Jy ! Component: 100 - total flux cleaned = 0.00107881 Jy ! Component: 150 - total flux cleaned = 0.00128593 Jy ! Component: 200 - total flux cleaned = 0.00150955 Jy ! Total flux subtracted in 200 components = 0.00150955 Jy ! Clean residual min=-0.029580 max=0.049570 Jy/beam ! Clean residual mean=-0.000871 rms=0.011194 Jy/beam ! Combined flux in latest and established models = 0.676969 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 35 components and 0.676969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137455Jy sigma=1.616983 ! Fit after self-cal, rms=0.136996Jy sigma=1.612690 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.165 x 8.574 at -0.885 degrees (North through East) ! Clean map min=-0.028711 max=0.51107 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136996Jy sigma=1.612690 ! Fit after self-cal, rms=0.136996Jy sigma=1.612690 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136996Jy sigma=1.612690 ! Fit after self-cal, rms=0.137009Jy sigma=1.612055 ! Inverting map and beam ! Estimated beam: bmin=3.165 mas, bmaj=8.574 mas, bpa=-0.885 degrees ! Estimated noise=2.18675 mJy/beam. ! Added new window around map position (-9.5, -1.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0525495 Jy ! Component: 100 - total flux cleaned = 0.0585838 Jy ! Component: 150 - total flux cleaned = 0.0605955 Jy ! Component: 200 - total flux cleaned = 0.0619105 Jy ! Total flux subtracted in 200 components = 0.0619105 Jy ! Clean residual min=-0.022505 max=0.032178 Jy/beam ! Clean residual mean=-0.001030 rms=0.007783 Jy/beam ! Combined flux in latest and established models = 0.73888 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 71 components and 0.73888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119527Jy sigma=1.382467 ! Fit after self-cal, rms=0.117132Jy sigma=1.344319 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117132Jy sigma=1.344319 ! Fit after self-cal, rms=0.110761Jy sigma=1.241131 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110761Jy sigma=1.241131 ! Fit after self-cal, rms=0.110750Jy sigma=1.240830 ! Inverting map and beam ! Estimated beam: bmin=3.133 mas, bmaj=8.517 mas, bpa=-1.453 degrees ! Estimated noise=2.16263 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00689838 Jy ! Component: 100 - total flux cleaned = 0.00689189 Jy ! Component: 150 - total flux cleaned = 0.00642581 Jy ! Component: 200 - total flux cleaned = 0.00580142 Jy ! Total flux subtracted in 200 components = 0.00580142 Jy ! Clean residual min=-0.015746 max=0.016085 Jy/beam ! Clean residual mean=-0.000633 rms=0.004644 Jy/beam ! Combined flux in latest and established models = 0.744681 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 101 components and 0.744681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108003Jy sigma=1.212221 ! Fit after self-cal, rms=0.107710Jy sigma=1.207539 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.738 mas, bmaj=32.78 mas, bpa=1.427 degrees ! Estimated noise=2.73435 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00611904 Jy ! Component: 100 - total flux cleaned = 0.00646732 Jy ! Component: 150 - total flux cleaned = 0.00661725 Jy ! Component: 200 - total flux cleaned = 0.0067551 Jy ! Total flux subtracted in 200 components = 0.0067551 Jy ! Clean residual min=-0.020060 max=0.018157 Jy/beam ! Clean residual mean=-0.001104 rms=0.006412 Jy/beam ! Combined flux in latest and established models = 0.751436 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 121 components and 0.751437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107275Jy sigma=1.203053 ! Fit after self-cal, rms=0.107123Jy sigma=1.201309 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.539 mas, bmaj=6.87 mas, bpa=-0.7194 degrees ! Estimated noise=3.27212 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.459227 Jy ! Component: 100 - total flux cleaned = 0.571568 Jy ! Component: 150 - total flux cleaned = 0.632157 Jy ! Component: 200 - total flux cleaned = 0.668227 Jy ! Total flux subtracted in 200 components = 0.668227 Jy ! Clean residual min=-0.016883 max=0.021698 Jy/beam ! Clean residual mean=-0.000083 rms=0.005825 Jy/beam ! Combined flux in latest and established models = 0.668227 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.668227 Jy ! Inverting map and beam ! Estimated beam: bmin=3.133 mas, bmaj=8.517 mas, bpa=-1.453 degrees ! Estimated noise=2.16263 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0393592 Jy ! Component: 100 - total flux cleaned = 0.0594112 Jy ! Component: 150 - total flux cleaned = 0.0708886 Jy ! Component: 200 - total flux cleaned = 0.0776583 Jy ! Total flux subtracted in 200 components = 0.0776583 Jy ! Clean residual min=-0.014171 max=0.013950 Jy/beam ! Clean residual mean=-0.000636 rms=0.004454 Jy/beam ! Combined flux in latest and established models = 0.745885 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 92 components and 0.745885 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.738 mas, bmaj=32.78 mas, bpa=1.427 degrees ! Estimated noise=2.73435 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00674665 Jy ! Component: 100 - total flux cleaned = 0.00736292 Jy ! Component: 150 - total flux cleaned = 0.00792268 Jy ! Component: 200 - total flux cleaned = 0.00842338 Jy ! Total flux subtracted in 200 components = 0.00842338 Jy ! Clean residual min=-0.018605 max=0.017492 Jy/beam ! Clean residual mean=-0.001120 rms=0.006249 Jy/beam ! Combined flux in latest and established models = 0.754309 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 109 components and 0.754309 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.133 mas, bmaj=8.517 mas, bpa=-1.453 degrees ! Estimated noise=2.16263 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00125555 Jy ! Component: 100 - total flux cleaned = -0.000861626 Jy ! Component: 150 - total flux cleaned = -0.000743793 Jy ! Component: 200 - total flux cleaned = -0.000631551 Jy ! Total flux subtracted in 200 components = -0.000631551 Jy ! Clean residual min=-0.013649 max=0.013925 Jy/beam ! Clean residual mean=-0.000646 rms=0.004263 Jy/beam ! Combined flux in latest and established models = 0.753677 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 122 components and 0.753677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105271Jy sigma=1.185708 ! Fit after self-cal, rms=0.105159Jy sigma=1.183536 wmodel J1454-3747_S_2004_04_30_yyk\_map.mod ! Writing 122 model components to file: J1454-3747_S_2004_04_30_yyk_map.mod wobs J1454-3747_S_2004_04_30_yyk\_uvs.fits ! Writing UV FITS file: J1454-3747_S_2004_04_30_yyk_uvs.fits wwins J1454-3747_S_2004_04_30_yyk\_map.win ! wwins: Wrote 2 windows to J1454-3747_S_2004_04_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00269788 Jy ! Component: 100 - total flux cleaned = 0.00565464 Jy ! Component: 150 - total flux cleaned = 0.00525588 Jy ! Component: 200 - total flux cleaned = 0.00430931 Jy ! Component: 250 - total flux cleaned = 0.0034175 Jy ! Component: 300 - total flux cleaned = 0.00225309 Jy ! Component: 350 - total flux cleaned = 0.00115652 Jy ! Component: 400 - total flux cleaned = -3.69901e-05 Jy ! Component: 450 - total flux cleaned = -0.00116849 Jy ! Component: 500 - total flux cleaned = -0.00239737 Jy ! Component: 550 - total flux cleaned = -0.00318854 Jy ! Component: 600 - total flux cleaned = -0.00356919 Jy ! Component: 650 - total flux cleaned = -0.00418298 Jy ! Component: 700 - total flux cleaned = -0.00429984 Jy ! Component: 750 - total flux cleaned = -0.00430357 Jy ! Component: 800 - total flux cleaned = -0.00475433 Jy ! Component: 850 - total flux cleaned = -0.00464506 Jy ! Component: 900 - total flux cleaned = -0.00496409 Jy ! Component: 950 - total flux cleaned = -0.00496603 Jy ! Component: 1000 - total flux cleaned = -0.00536639 Jy ! Component: 1050 - total flux cleaned = -0.00536589 Jy ! Component: 1100 - total flux cleaned = -0.00555519 Jy ! Component: 1150 - total flux cleaned = -0.00583328 Jy ! Component: 1200 - total flux cleaned = -0.00574243 Jy ! Component: 1250 - total flux cleaned = -0.00583076 Jy ! Component: 1300 - total flux cleaned = -0.00591722 Jy ! Component: 1350 - total flux cleaned = -0.00617377 Jy ! Component: 1400 - total flux cleaned = -0.0061727 Jy ! Component: 1450 - total flux cleaned = -0.00625409 Jy ! Component: 1500 - total flux cleaned = -0.00584816 Jy ! Component: 1550 - total flux cleaned = -0.00560897 Jy ! Component: 1600 - total flux cleaned = -0.00537225 Jy ! Component: 1650 - total flux cleaned = -0.00482285 Jy ! Component: 1700 - total flux cleaned = -0.00404506 Jy ! Component: 1750 - total flux cleaned = -0.00350454 Jy ! Component: 1800 - total flux cleaned = -0.00304485 Jy ! Component: 1850 - total flux cleaned = -0.00258758 Jy ! Component: 1900 - total flux cleaned = -0.00220822 Jy ! Component: 1950 - total flux cleaned = -0.00182988 Jy ! Component: 2000 - total flux cleaned = -0.00137696 Jy ! Total flux subtracted in 2048 components = -0.00100069 Jy ! Clean residual min=-0.009033 max=0.004786 Jy/beam ! Clean residual mean=-0.000496 rms=0.001581 Jy/beam ! Combined flux in latest and established models = 0.752677 Jy keep ! Adding 137 model components to the UV plane model. ! The established model now contains 259 components and 0.752677 Jy ![Exited script file: muppet] wmap "J1454-3747_S_2004_04_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.133 x 8.517 at -1.453 degrees (North through East) ! Clean map min=-0.0084727 max=0.50213 Jy/beam ! Writing clean map to FITS file: J1454-3747_S_2004_04_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.502132 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0015388 device "J1454-3747_S_2004_04_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J1454-3747_S_2004_04_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.91936 0.91936 1.83872 3.67744 7.35488 14.7098 29.4195 58.839 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0046 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.502 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.133 x 8.517 at -1.453 degrees (North through East) ! Clean map min=-0.0084727 max=0.50213 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1454-3747_S_2004_04_30_yyk\_map.gif/gif" ! Attempting to open device: 'J1454-3747_S_2004_04_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1454-3747_S_2004_04_30_yyk_uvs.log closed on Wed Dec 7 00:31:47 2005