! Started logfile: J1441-3303_S_2004_05_08_yyk_uvs.log on Wed Dec 7 00:31:18 2005 obs J1441-3303_S_2004_05_08_yyk_uve.fits ! Reading UV FITS file: J1441-3303_S_2004_05_08_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1441-3303 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1432 lines of history. ! ! Reading 720 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1441-3303_S_2004_05_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.225519 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.817331Jy sigma=10.191909 ! Fit after self-cal, rms=0.816485Jy sigma=10.186217 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.41 mas, bmaj=6.993 mas, bpa=-5.886 degrees ! Estimated noise=2.83179 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.167582 Jy ! Component: 100 - total flux cleaned = 0.200253 Jy ! Total flux subtracted in 100 components = 0.200253 Jy ! Clean residual min=-0.013540 max=0.021645 Jy/beam ! Clean residual mean=-0.000111 rms=0.004148 Jy/beam ! Combined flux in latest and established models = 0.200253 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.200253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115790Jy sigma=1.207739 ! Fit after self-cal, rms=0.115800Jy sigma=1.207532 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.026 mas, bmaj=8.334 mas, bpa=-4.532 degrees ! Estimated noise=2.18739 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.019927 Jy ! Component: 100 - total flux cleaned = 0.0274082 Jy ! Component: 150 - total flux cleaned = 0.0280588 Jy ! Component: 200 - total flux cleaned = 0.0283488 Jy ! Total flux subtracted in 200 components = 0.0283488 Jy ! Clean residual min=-0.010870 max=0.012230 Jy/beam ! Clean residual mean=-0.000185 rms=0.003054 Jy/beam ! Combined flux in latest and established models = 0.228602 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 17 components and 0.228602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114751Jy sigma=1.172416 ! Fit after self-cal, rms=0.114750Jy sigma=1.172389 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02213 ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.99 HN 1.07 KP 1.00 ! LA 1.07 MK 0.96 NL 1.00 OV 0.96 ! PT 0.98 SC 0.90 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.02067 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.94 HN 1.08 KP 0.85 ! LA 1.00* MK 1.02 NL 1.05 OV 0.85 ! PT 0.91 SC 1.12 ! ! ! Fit before self-cal, rms=0.114750Jy sigma=1.172389 ! Fit after self-cal, rms=0.113831Jy sigma=1.152342 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113831Jy sigma=1.152342 ! Fit after self-cal, rms=0.113844Jy sigma=1.152284 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.057 mas, bmaj=8.374 mas, bpa=-4.448 degrees ! Estimated noise=2.16858 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00185758 Jy ! Component: 100 - total flux cleaned = -0.00184809 Jy ! Component: 150 - total flux cleaned = -0.00184277 Jy ! Component: 200 - total flux cleaned = -0.00173813 Jy ! Total flux subtracted in 200 components = -0.00173813 Jy ! Clean residual min=-0.009085 max=0.009702 Jy/beam ! Clean residual mean=-0.000108 rms=0.002746 Jy/beam ! Combined flux in latest and established models = 0.226864 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 22 components and 0.226864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113442Jy sigma=1.149894 ! Fit after self-cal, rms=0.113445Jy sigma=1.149892 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113445Jy sigma=1.149892 ! Fit after self-cal, rms=0.108253Jy sigma=1.103946 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136016 Jy ! Component: 100 - total flux cleaned = 0.00162335 Jy ! Component: 150 - total flux cleaned = 0.00170376 Jy ! Component: 200 - total flux cleaned = 0.00170364 Jy ! Total flux subtracted in 200 components = 0.00170364 Jy ! Clean residual min=-0.008795 max=0.008636 Jy/beam ! Clean residual mean=-0.000113 rms=0.002623 Jy/beam ! Combined flux in latest and established models = 0.228568 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 26 components and 0.228568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108191Jy sigma=1.102450 ! Fit after self-cal, rms=0.107796Jy sigma=1.099567 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.057 x 8.374 at -4.448 degrees (North through East) ! Clean map min=-0.0083083 max=0.18866 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107796Jy sigma=1.099567 ! Fit after self-cal, rms=0.105752Jy sigma=1.086700 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105752Jy sigma=1.086700 ! Fit after self-cal, rms=0.105743Jy sigma=1.086396 ! Inverting map and beam ! Estimated beam: bmin=3.092 mas, bmaj=8.447 mas, bpa=-4.423 degrees ! Estimated noise=2.10413 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00626374 Jy ! Component: 100 - total flux cleaned = -0.00794904 Jy ! Component: 150 - total flux cleaned = -0.0079484 Jy ! Component: 200 - total flux cleaned = -0.00794744 Jy ! Total flux subtracted in 200 components = -0.00794744 Jy ! Clean residual min=-0.007938 max=0.008289 Jy/beam ! Clean residual mean=-0.000073 rms=0.002372 Jy/beam ! Combined flux in latest and established models = 0.22062 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 36 components and 0.22062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105024Jy sigma=1.082152 ! Fit after self-cal, rms=0.105021Jy sigma=1.082103 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105021Jy sigma=1.082103 ! Fit after self-cal, rms=0.103098Jy sigma=1.073196 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103098Jy sigma=1.073196 ! Fit after self-cal, rms=0.103113Jy sigma=1.073166 ! Inverting map and beam ! Estimated beam: bmin=3.116 mas, bmaj=8.503 mas, bpa=-4.47 degrees ! Estimated noise=2.06112 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00424975 Jy ! Component: 100 - total flux cleaned = -0.0052088 Jy ! Component: 150 - total flux cleaned = -0.00516369 Jy ! Component: 200 - total flux cleaned = -0.00516035 Jy ! Total flux subtracted in 200 components = -0.00516035 Jy ! Clean residual min=-0.007818 max=0.008356 Jy/beam ! Clean residual mean=-0.000068 rms=0.002335 Jy/beam ! Combined flux in latest and established models = 0.21546 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 40 components and 0.21546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102663Jy sigma=1.071017 ! Fit after self-cal, rms=0.102662Jy sigma=1.071004 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.504 mas, bmaj=25.11 mas, bpa=0.4374 degrees ! Estimated noise=2.64143 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204076 Jy ! Component: 100 - total flux cleaned = 0.00210018 Jy ! Component: 150 - total flux cleaned = 0.00221208 Jy ! Component: 200 - total flux cleaned = 0.00226618 Jy ! Total flux subtracted in 200 components = 0.00226618 Jy ! Clean residual min=-0.007983 max=0.008854 Jy/beam ! Clean residual mean=-0.000135 rms=0.003179 Jy/beam ! Combined flux in latest and established models = 0.217726 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 42 components and 0.217726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102573Jy sigma=1.071091 ! Fit after self-cal, rms=0.102591Jy sigma=1.070991 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.436 mas, bmaj=7.037 mas, bpa=-5.898 degrees ! Estimated noise=2.70603 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.161699 Jy ! Component: 100 - total flux cleaned = 0.191905 Jy ! Component: 150 - total flux cleaned = 0.199968 Jy ! Component: 200 - total flux cleaned = 0.20192 Jy ! Total flux subtracted in 200 components = 0.20192 Jy ! Clean residual min=-0.011600 max=0.013423 Jy/beam ! Clean residual mean=-0.000046 rms=0.003183 Jy/beam ! Combined flux in latest and established models = 0.20192 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.20192 Jy ! Inverting map and beam ! Estimated beam: bmin=3.116 mas, bmaj=8.503 mas, bpa=-4.47 degrees ! Estimated noise=2.06112 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, -9). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113843 Jy ! Component: 100 - total flux cleaned = 0.0126813 Jy ! Component: 150 - total flux cleaned = 0.0131438 Jy ! Component: 200 - total flux cleaned = 0.0132776 Jy ! Total flux subtracted in 200 components = 0.0132776 Jy ! Clean residual min=-0.007643 max=0.008185 Jy/beam ! Clean residual mean=-0.000073 rms=0.002311 Jy/beam ! Combined flux in latest and established models = 0.215198 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 33 components and 0.215198 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.504 mas, bmaj=25.11 mas, bpa=0.4374 degrees ! Estimated noise=2.64143 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00233345 Jy ! Component: 100 - total flux cleaned = 0.00252256 Jy ! Component: 150 - total flux cleaned = 0.00259698 Jy ! Component: 200 - total flux cleaned = 0.00274589 Jy ! Total flux subtracted in 200 components = 0.00274589 Jy ! Clean residual min=-0.007278 max=0.008676 Jy/beam ! Clean residual mean=-0.000133 rms=0.003165 Jy/beam ! Combined flux in latest and established models = 0.217943 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 43 components and 0.217943 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.116 mas, bmaj=8.503 mas, bpa=-4.47 degrees ! Estimated noise=2.06112 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00110422 Jy ! Component: 100 - total flux cleaned = -0.00122066 Jy ! Component: 150 - total flux cleaned = -0.0011335 Jy ! Component: 200 - total flux cleaned = -0.00104391 Jy ! Total flux subtracted in 200 components = -0.00104391 Jy ! Clean residual min=-0.007221 max=0.008009 Jy/beam ! Clean residual mean=-0.000066 rms=0.002245 Jy/beam ! Combined flux in latest and established models = 0.2169 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 59 components and 0.216899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101823Jy sigma=1.064161 ! Fit after self-cal, rms=0.101785Jy sigma=1.062802 wmodel J1441-3303_S_2004_05_08_yyk\_map.mod ! Writing 59 model components to file: J1441-3303_S_2004_05_08_yyk_map.mod wobs J1441-3303_S_2004_05_08_yyk\_uvs.fits ! Writing UV FITS file: J1441-3303_S_2004_05_08_yyk_uvs.fits wwins J1441-3303_S_2004_05_08_yyk\_map.win ! wwins: Wrote 2 windows to J1441-3303_S_2004_05_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000223591 Jy ! Component: 100 - total flux cleaned = -2.36771e-05 Jy ! Component: 150 - total flux cleaned = 0.000321186 Jy ! Component: 200 - total flux cleaned = 0.000851025 Jy ! Component: 250 - total flux cleaned = 0.000851408 Jy ! Component: 300 - total flux cleaned = 0.000750858 Jy ! Component: 350 - total flux cleaned = 0.000747065 Jy ! Component: 400 - total flux cleaned = 0.000570006 Jy ! Component: 450 - total flux cleaned = 0.000570878 Jy ! Component: 500 - total flux cleaned = 0.000654532 Jy ! Component: 550 - total flux cleaned = 0.00057483 Jy ! Component: 600 - total flux cleaned = 0.000418311 Jy ! Component: 650 - total flux cleaned = 0.000190738 Jy ! Component: 700 - total flux cleaned = -3.00212e-05 Jy ! Component: 750 - total flux cleaned = -0.000174945 Jy ! Component: 800 - total flux cleaned = -0.00060062 Jy ! Component: 850 - total flux cleaned = -0.000878517 Jy ! Component: 900 - total flux cleaned = -0.00135437 Jy ! Component: 950 - total flux cleaned = -0.00168648 Jy ! Component: 1000 - total flux cleaned = -0.00207856 Jy ! Component: 1050 - total flux cleaned = -0.00246222 Jy ! Component: 1100 - total flux cleaned = -0.00271338 Jy ! Component: 1150 - total flux cleaned = -0.00296067 Jy ! Component: 1200 - total flux cleaned = -0.00326452 Jy ! Component: 1250 - total flux cleaned = -0.00368299 Jy ! Component: 1300 - total flux cleaned = -0.00403536 Jy ! Component: 1350 - total flux cleaned = -0.00438188 Jy ! Component: 1400 - total flux cleaned = -0.00472343 Jy ! Component: 1450 - total flux cleaned = -0.00489136 Jy ! Component: 1500 - total flux cleaned = -0.0052227 Jy ! Component: 1550 - total flux cleaned = -0.00549534 Jy ! Component: 1600 - total flux cleaned = -0.00587073 Jy ! Component: 1650 - total flux cleaned = -0.00618825 Jy ! Component: 1700 - total flux cleaned = -0.00660545 Jy ! Component: 1750 - total flux cleaned = -0.00691367 Jy ! Component: 1800 - total flux cleaned = -0.00731914 Jy ! Component: 1850 - total flux cleaned = -0.00772048 Jy ! Component: 1900 - total flux cleaned = -0.00816598 Jy ! Component: 1950 - total flux cleaned = -0.00855753 Jy ! Component: 2000 - total flux cleaned = -0.0090411 Jy ! Total flux subtracted in 2048 components = -0.00942255 Jy ! Clean residual min=-0.003264 max=0.002495 Jy/beam ! Clean residual mean=-0.000044 rms=0.001006 Jy/beam ! Combined flux in latest and established models = 0.207477 Jy keep ! Adding 125 model components to the UV plane model. ! The established model now contains 184 components and 0.207477 Jy ![Exited script file: muppet] wmap "J1441-3303_S_2004_05_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.116 x 8.503 at -4.47 degrees (North through East) ! Clean map min=-0.0081863 max=0.1838 Jy/beam ! Writing clean map to FITS file: J1441-3303_S_2004_05_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.183797 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000973078 device "J1441-3303_S_2004_05_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J1441-3303_S_2004_05_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.58829 1.58829 3.17659 6.35317 12.7063 25.4127 50.8254 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.183 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.116 x 8.503 at -4.47 degrees (North through East) ! Clean map min=-0.0081863 max=0.1838 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1441-3303_S_2004_05_08_yyk\_map.gif/gif" ! Attempting to open device: 'J1441-3303_S_2004_05_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1441-3303_S_2004_05_08_yyk_uvs.log closed on Wed Dec 7 00:31:22 2005