! Started logfile: J1427-3305_X_2004_04_30_yyk_uvs.log on Wed Dec 7 01:09:08 2005 obs J1427-3305_X_2004_04_30_yyk_uve.fits ! Reading UV FITS file: J1427-3305_X_2004_04_30_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.3 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1427-3305 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1546 lines of history. ! ! Reading 216 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1427-3305_X_2004_04_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 256x256 pixels with 0.800x0.800 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.481378 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.564437Jy sigma=8.119631 ! Fit after self-cal, rms=0.552134Jy sigma=7.760898 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.392 mas, bmaj=18.12 mas, bpa=0.1945 degrees ! Estimated noise=6.43858 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.406057 Jy ! Component: 100 - total flux cleaned = 0.416597 Jy ! Total flux subtracted in 100 components = 0.416597 Jy ! Clean residual min=-0.017950 max=0.018396 Jy/beam ! Clean residual mean=-0.000057 rms=0.007647 Jy/beam ! Combined flux in latest and established models = 0.416597 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.416597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127739Jy sigma=1.374315 ! Fit after self-cal, rms=0.127187Jy sigma=1.373750 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.335 mas, bmaj=18.47 mas, bpa=-1.842 degrees ! Estimated noise=4.5703 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000288354 Jy ! Component: 100 - total flux cleaned = -0.00564057 Jy ! Component: 150 - total flux cleaned = -0.00350879 Jy ! Component: 200 - total flux cleaned = -0.0040694 Jy ! Total flux subtracted in 200 components = -0.0040694 Jy ! Clean residual min=-0.007333 max=0.007422 Jy/beam ! Clean residual mean=-0.000042 rms=0.002570 Jy/beam ! Combined flux in latest and established models = 0.412527 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 50 model components to the UV plane model. ! The established model now contains 55 components and 0.412527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122536Jy sigma=1.264023 ! Fit after self-cal, rms=0.121816Jy sigma=1.262178 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00528 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00* KP 1.01 ! LA 1.00 MK 1.00* NL 1.00* OV 1.01 ! PT 0.95 SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00633 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00* KP 0.99 ! LA 0.97 MK 1.00* NL 1.00* OV 0.99 ! PT 1.01 SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.999363 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 0.97 ! LA 1.01 MK 1.00* NL 1.00* OV 0.96 ! PT 1.03 SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.994789 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 0.98 ! LA 1.00 MK 1.00* NL 1.00* OV 1.00 ! PT 1.08 SC 1.00* ! ! ! Fit before self-cal, rms=0.121816Jy sigma=1.262178 ! Fit after self-cal, rms=0.121067Jy sigma=1.236727 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121067Jy sigma=1.236727 ! Fit after self-cal, rms=0.121067Jy sigma=1.236720 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.314 mas, bmaj=18.45 mas, bpa=-1.829 degrees ! Estimated noise=4.55902 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00145282 Jy ! Component: 100 - total flux cleaned = -0.00367629 Jy ! Component: 150 - total flux cleaned = -0.00599752 Jy ! Component: 200 - total flux cleaned = -0.00803059 Jy ! Total flux subtracted in 200 components = -0.00803059 Jy ! Clean residual min=-0.002184 max=0.002180 Jy/beam ! Clean residual mean=-0.000026 rms=0.000902 Jy/beam ! Combined flux in latest and established models = 0.404497 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 45 model components to the UV plane model. ! The established model now contains 100 components and 0.404497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119766Jy sigma=1.224011 ! Fit after self-cal, rms=0.119922Jy sigma=1.223603 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119922Jy sigma=1.223603 ! Fit after self-cal, rms=0.090229Jy sigma=0.867204 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00286179 Jy ! Component: 100 - total flux cleaned = -0.00463488 Jy ! Component: 150 - total flux cleaned = -0.00405406 Jy ! Component: 200 - total flux cleaned = -0.00353084 Jy ! Total flux subtracted in 200 components = -0.00353084 Jy ! Clean residual min=-0.001273 max=0.001254 Jy/beam ! Clean residual mean=-0.000011 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.400966 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 46 model components to the UV plane model. ! The established model now contains 144 components and 0.400966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089371Jy sigma=0.855443 ! Fit after self-cal, rms=0.084123Jy sigma=0.813656 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.314 x 18.45 at -1.829 degrees (North through East) ! Clean map min=-0.015623 max=0.44589 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084123Jy sigma=0.813656 ! Fit after self-cal, rms=0.083680Jy sigma=0.812046 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083680Jy sigma=0.812046 ! Fit after self-cal, rms=0.082526Jy sigma=0.803560 ! Inverting map and beam ! Estimated beam: bmin=4.316 mas, bmaj=18.44 mas, bpa=-1.86 degrees ! Estimated noise=4.55147 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00192281 Jy ! Component: 100 - total flux cleaned = -0.00247868 Jy ! Component: 150 - total flux cleaned = -0.00313629 Jy ! Component: 200 - total flux cleaned = -0.00374238 Jy ! Total flux subtracted in 200 components = -0.00374238 Jy ! Clean residual min=-0.000946 max=0.000958 Jy/beam ! Clean residual mean=-0.000005 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.397223 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 50 model components to the UV plane model. ! The established model now contains 192 components and 0.397223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082161Jy sigma=0.799403 ! Fit after self-cal, rms=0.081810Jy sigma=0.796487 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081810Jy sigma=0.796487 ! Fit after self-cal, rms=0.081396Jy sigma=0.749530 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081396Jy sigma=0.749530 ! Fit after self-cal, rms=0.081406Jy sigma=0.750684 ! Inverting map and beam ! Estimated beam: bmin=4.321 mas, bmaj=18.42 mas, bpa=-1.781 degrees ! Estimated noise=4.58111 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00339455 Jy ! Component: 100 - total flux cleaned = 0.00298261 Jy ! Component: 150 - total flux cleaned = 0.00284519 Jy ! Component: 200 - total flux cleaned = 0.00285421 Jy ! Total flux subtracted in 200 components = 0.00285421 Jy ! Clean residual min=-0.001866 max=0.001915 Jy/beam ! Clean residual mean=-0.000005 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.400078 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 217 components and 0.400078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080921Jy sigma=0.745036 ! Fit after self-cal, rms=0.080885Jy sigma=0.742984 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.472 mas, bmaj=18.27 mas, bpa=-1.98 degrees ! Estimated noise=4.59081 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000539706 Jy ! Component: 100 - total flux cleaned = -0.000955215 Jy ! Component: 150 - total flux cleaned = -0.000946779 Jy ! Component: 200 - total flux cleaned = -0.000933882 Jy ! Total flux subtracted in 200 components = -0.000933882 Jy ! Clean residual min=-0.001253 max=0.001223 Jy/beam ! Clean residual mean=-0.000002 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.399144 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 250 components and 0.399144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080837Jy sigma=0.740999 ! Fit after self-cal, rms=0.080822Jy sigma=0.740791 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.391 mas, bmaj=18.11 mas, bpa=0.2045 degrees ! Estimated noise=6.47569 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.413404 Jy ! Component: 100 - total flux cleaned = 0.445286 Jy ! Component: 150 - total flux cleaned = 0.437814 Jy ! Component: 200 - total flux cleaned = 0.435982 Jy ! Total flux subtracted in 200 components = 0.435982 Jy ! Clean residual min=-0.006676 max=0.006864 Jy/beam ! Clean residual mean=-0.000029 rms=0.002708 Jy/beam ! Combined flux in latest and established models = 0.435982 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.435982 Jy ! Inverting map and beam ! Estimated beam: bmin=4.321 mas, bmaj=18.42 mas, bpa=-1.781 degrees ! Estimated noise=4.58111 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0026469 Jy ! Component: 100 - total flux cleaned = -0.0074288 Jy ! Component: 150 - total flux cleaned = -0.00991303 Jy ! Component: 200 - total flux cleaned = -0.0122141 Jy ! Total flux subtracted in 200 components = -0.0122141 Jy ! Clean residual min=-0.002828 max=0.002858 Jy/beam ! Clean residual mean=-0.000019 rms=0.001079 Jy/beam ! Combined flux in latest and established models = 0.423768 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 82 components and 0.423768 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.472 mas, bmaj=18.27 mas, bpa=-1.98 degrees ! Estimated noise=4.59081 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000177658 Jy ! Component: 100 - total flux cleaned = -0.00090259 Jy ! Component: 150 - total flux cleaned = -0.00105745 Jy ! Component: 200 - total flux cleaned = -0.000891964 Jy ! Total flux subtracted in 200 components = -0.000891964 Jy ! Clean residual min=-0.002180 max=0.002165 Jy/beam ! Clean residual mean=-0.000012 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 0.422876 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 119 components and 0.422876 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.321 mas, bmaj=18.42 mas, bpa=-1.781 degrees ! Estimated noise=4.58111 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000664792 Jy ! Component: 100 - total flux cleaned = 0.00045105 Jy ! Component: 150 - total flux cleaned = -0.000557216 Jy ! Component: 200 - total flux cleaned = -0.000917286 Jy ! Total flux subtracted in 200 components = -0.000917286 Jy ! Clean residual min=-0.001133 max=0.001134 Jy/beam ! Clean residual mean=-0.000010 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.421959 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 48 model components to the UV plane model. ! The established model now contains 159 components and 0.421959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080661Jy sigma=0.742272 ! Fit after self-cal, rms=0.080597Jy sigma=0.741847 wmodel J1427-3305_X_2004_04_30_yyk\_map.mod ! Writing 159 model components to file: J1427-3305_X_2004_04_30_yyk_map.mod wobs J1427-3305_X_2004_04_30_yyk\_uvs.fits ! Writing UV FITS file: J1427-3305_X_2004_04_30_yyk_uvs.fits wwins J1427-3305_X_2004_04_30_yyk\_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J1427-3305_X_2004_04_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.321 x 18.42 at -1.781 degrees (North through East) ! Clean map min=-0.011248 max=0.45941 Jy/beam ! Writing clean map to FITS file: J1427-3305_X_2004_04_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.459411 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000407469 device "J1427-3305_X_2004_04_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J1427-3305_X_2004_04_30_yyk_map.eps/VPS' loglevs 2*100*3*image_rms/peak_flux ! The new contour levels are: ! -0.532163 0.532163 1.06433 2.12865 4.25731 8.51461 17.0292 34.0585 68.1169 print "clev=",int(2*3*image_rms*10000)/10000 ! clev= 0.0024 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.459 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.321 x 18.42 at -1.781 degrees (North through East) ! Clean map min=-0.011248 max=0.45941 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1427-3305_X_2004_04_30_yyk\_map.gif/gif" ! Attempting to open device: 'J1427-3305_X_2004_04_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1427-3305_X_2004_04_30_yyk_uvs.log closed on Wed Dec 7 01:09:09 2005