! Started logfile: J1425-2513_S_2004_05_08_yyk_uvs.log on Wed Dec 7 00:30:27 2005 obs J1425-2513_S_2004_05_08_yyk_uve.fits ! Reading UV FITS file: J1425-2513_S_2004_05_08_yyk_uve.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1425-2513 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1432 lines of history. ! ! Reading 1440 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1425-2513_S_2004_05_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.223654 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.808747Jy sigma=12.331010 ! Fit after self-cal, rms=0.808513Jy sigma=12.327549 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.248 mas, bmaj=6.76 mas, bpa=-5.47 degrees ! Estimated noise=1.94465 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.164791 Jy ! Component: 100 - total flux cleaned = 0.194106 Jy ! Total flux subtracted in 100 components = 0.194106 Jy ! Clean residual min=-0.008153 max=0.011431 Jy/beam ! Clean residual mean=0.000017 rms=0.002565 Jy/beam ! Combined flux in latest and established models = 0.194106 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.194106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102704Jy sigma=1.177381 ! Fit after self-cal, rms=0.102702Jy sigma=1.176530 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.046 mas, bmaj=8.458 mas, bpa=-4.53 degrees ! Estimated noise=1.28768 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137758 Jy ! Component: 100 - total flux cleaned = 0.0192678 Jy ! Component: 150 - total flux cleaned = 0.0210199 Jy ! Component: 200 - total flux cleaned = 0.0213511 Jy ! Total flux subtracted in 200 components = 0.0213511 Jy ! Clean residual min=-0.006090 max=0.008084 Jy/beam ! Clean residual mean=-0.000038 rms=0.001819 Jy/beam ! Combined flux in latest and established models = 0.215458 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 30 components and 0.215458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100893Jy sigma=1.151883 ! Fit after self-cal, rms=0.100859Jy sigma=1.151693 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.999239 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.05 HN 1.04 KP 1.01 ! LA 1.09 MK 0.96 NL 0.99 OV 0.98 ! PT 0.99 SC 0.94 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.977979 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.04 HN 1.10 KP 0.95 ! LA 1.02 MK 1.06 NL 1.02 OV 1.00 ! PT 0.94 SC 1.03 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.990079 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.07 KP 0.97 ! LA 0.93 MK 0.97 NL 1.05 OV 1.05 ! PT 1.14 SC 0.97 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.100859Jy sigma=1.151693 ! Fit after self-cal, rms=0.100575Jy sigma=1.138125 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100575Jy sigma=1.138125 ! Fit after self-cal, rms=0.100577Jy sigma=1.138089 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.025 mas, bmaj=8.358 mas, bpa=-4.173 degrees ! Estimated noise=1.28511 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142597 Jy ! Component: 100 - total flux cleaned = 0.00142413 Jy ! Component: 150 - total flux cleaned = 0.00148158 Jy ! Component: 200 - total flux cleaned = 0.00158005 Jy ! Total flux subtracted in 200 components = 0.00158005 Jy ! Clean residual min=-0.005820 max=0.007197 Jy/beam ! Clean residual mean=0.000022 rms=0.001624 Jy/beam ! Combined flux in latest and established models = 0.217038 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 35 components and 0.217038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100482Jy sigma=1.136763 ! Fit after self-cal, rms=0.100458Jy sigma=1.136695 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100458Jy sigma=1.136695 ! Fit after self-cal, rms=0.098227Jy sigma=1.093364 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126735 Jy ! Component: 100 - total flux cleaned = 0.00150793 Jy ! Component: 150 - total flux cleaned = 0.00154992 Jy ! Component: 200 - total flux cleaned = 0.00162691 Jy ! Total flux subtracted in 200 components = 0.00162691 Jy ! Clean residual min=-0.005745 max=0.006945 Jy/beam ! Clean residual mean=0.000026 rms=0.001586 Jy/beam ! Combined flux in latest and established models = 0.218664 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 38 components and 0.218664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098148Jy sigma=1.092639 ! Fit after self-cal, rms=0.098141Jy sigma=1.089206 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.025 x 8.358 at -4.173 degrees (North through East) ! Clean map min=-0.0056254 max=0.18971 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098141Jy sigma=1.089206 ! Fit after self-cal, rms=0.099451Jy sigma=1.078491 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099451Jy sigma=1.078491 ! Fit after self-cal, rms=0.099503Jy sigma=1.078110 ! Inverting map and beam ! Estimated beam: bmin=3.006 mas, bmaj=8.289 mas, bpa=-3.903 degrees ! Estimated noise=1.30496 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00405841 Jy ! Component: 100 - total flux cleaned = 0.00542409 Jy ! Component: 150 - total flux cleaned = 0.00554489 Jy ! Component: 200 - total flux cleaned = 0.00564825 Jy ! Total flux subtracted in 200 components = 0.00564825 Jy ! Clean residual min=-0.005707 max=0.006477 Jy/beam ! Clean residual mean=0.000028 rms=0.001530 Jy/beam ! Combined flux in latest and established models = 0.224313 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 49 components and 0.224313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099223Jy sigma=1.075775 ! Fit after self-cal, rms=0.099245Jy sigma=1.075683 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099245Jy sigma=1.075683 ! Fit after self-cal, rms=0.098133Jy sigma=1.054355 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098133Jy sigma=1.054355 ! Fit after self-cal, rms=0.098129Jy sigma=1.054238 ! Inverting map and beam ! Estimated beam: bmin=2.992 mas, bmaj=8.232 mas, bpa=-3.78 degrees ! Estimated noise=1.31142 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0023016 Jy ! Component: 100 - total flux cleaned = 0.00281691 Jy ! Component: 150 - total flux cleaned = 0.00284698 Jy ! Component: 200 - total flux cleaned = 0.00289889 Jy ! Total flux subtracted in 200 components = 0.00289889 Jy ! Clean residual min=-0.005500 max=0.005872 Jy/beam ! Clean residual mean=0.000041 rms=0.001483 Jy/beam ! Combined flux in latest and established models = 0.227212 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 52 components and 0.227212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098034Jy sigma=1.053431 ! Fit after self-cal, rms=0.098025Jy sigma=1.053399 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.816 mas, bmaj=20.02 mas, bpa=0.4514 degrees ! Estimated noise=1.70678 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000793473 Jy ! Component: 100 - total flux cleaned = 0.000774412 Jy ! Component: 150 - total flux cleaned = 0.000665564 Jy ! Component: 200 - total flux cleaned = 0.000629941 Jy ! Total flux subtracted in 200 components = 0.000629941 Jy ! Clean residual min=-0.006361 max=0.008688 Jy/beam ! Clean residual mean=0.000081 rms=0.001981 Jy/beam ! Combined flux in latest and established models = 0.227842 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 57 components and 0.227842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098167Jy sigma=1.054762 ! Fit after self-cal, rms=0.098035Jy sigma=1.053302 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.237 mas, bmaj=6.715 mas, bpa=-5.228 degrees ! Estimated noise=1.94319 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.165767 Jy ! Component: 100 - total flux cleaned = 0.196673 Jy ! Component: 150 - total flux cleaned = 0.21011 Jy ! Component: 200 - total flux cleaned = 0.216948 Jy ! Total flux subtracted in 200 components = 0.216948 Jy ! Clean residual min=-0.007577 max=0.008755 Jy/beam ! Clean residual mean=0.000040 rms=0.002097 Jy/beam ! Combined flux in latest and established models = 0.216948 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.216948 Jy ! Inverting map and beam ! Estimated beam: bmin=2.992 mas, bmaj=8.232 mas, bpa=-3.78 degrees ! Estimated noise=1.31142 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, 3). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00937047 Jy ! Component: 100 - total flux cleaned = 0.0131113 Jy ! Component: 150 - total flux cleaned = 0.0135759 Jy ! Component: 200 - total flux cleaned = 0.0136491 Jy ! Total flux subtracted in 200 components = 0.0136491 Jy ! Clean residual min=-0.005858 max=0.005653 Jy/beam ! Clean residual mean=0.000042 rms=0.001415 Jy/beam ! Combined flux in latest and established models = 0.230597 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 64 components and 0.230597 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.816 mas, bmaj=20.02 mas, bpa=0.4514 degrees ! Estimated noise=1.70678 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000529581 Jy ! Component: 100 - total flux cleaned = -0.000477495 Jy ! Component: 150 - total flux cleaned = -0.000521226 Jy ! Component: 200 - total flux cleaned = -0.000640533 Jy ! Total flux subtracted in 200 components = -0.000640533 Jy ! Clean residual min=-0.006345 max=0.008506 Jy/beam ! Clean residual mean=0.000078 rms=0.001946 Jy/beam ! Combined flux in latest and established models = 0.229956 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 77 components and 0.229956 Jy ! Inverting map ! Added new window around map position (-33.5, 15). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00754651 Jy ! Component: 100 - total flux cleaned = 0.00915164 Jy ! Component: 150 - total flux cleaned = 0.0102518 Jy ! Component: 200 - total flux cleaned = 0.0111222 Jy ! Total flux subtracted in 200 components = 0.0111222 Jy ! Clean residual min=-0.004527 max=0.003980 Jy/beam ! Clean residual mean=0.000038 rms=0.001230 Jy/beam ! Combined flux in latest and established models = 0.241079 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 137 components and 0.241079 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.992 mas, bmaj=8.232 mas, bpa=-3.78 degrees ! Estimated noise=1.31142 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00038746 Jy ! Component: 100 - total flux cleaned = 0.000983695 Jy ! Component: 150 - total flux cleaned = 0.00142059 Jy ! Component: 200 - total flux cleaned = 0.00152354 Jy ! Total flux subtracted in 200 components = 0.00152354 Jy ! Clean residual min=-0.003943 max=0.003596 Jy/beam ! Clean residual mean=0.000022 rms=0.001076 Jy/beam ! Combined flux in latest and established models = 0.242602 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 42 model components to the UV plane model. ! The established model now contains 179 components and 0.242602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097159Jy sigma=1.037915 ! Fit after self-cal, rms=0.097075Jy sigma=1.037071 wmodel J1425-2513_S_2004_05_08_yyk\_map.mod ! Writing 179 model components to file: J1425-2513_S_2004_05_08_yyk_map.mod wobs J1425-2513_S_2004_05_08_yyk\_uvs.fits ! Writing UV FITS file: J1425-2513_S_2004_05_08_yyk_uvs.fits wwins J1425-2513_S_2004_05_08_yyk\_map.win ! wwins: Wrote 3 windows to J1425-2513_S_2004_05_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000888936 Jy ! Component: 100 - total flux cleaned = -0.00160858 Jy ! Component: 150 - total flux cleaned = -0.00209823 Jy ! Component: 200 - total flux cleaned = -0.00261589 Jy ! Component: 250 - total flux cleaned = -0.00283494 Jy ! Component: 300 - total flux cleaned = -0.00309553 Jy ! Component: 350 - total flux cleaned = -0.00304538 Jy ! Component: 400 - total flux cleaned = -0.00319386 Jy ! Component: 450 - total flux cleaned = -0.00333757 Jy ! Component: 500 - total flux cleaned = -0.00356924 Jy ! Component: 550 - total flux cleaned = -0.00366015 Jy ! Component: 600 - total flux cleaned = -0.00392578 Jy ! Component: 650 - total flux cleaned = -0.00409939 Jy ! Component: 700 - total flux cleaned = -0.00422666 Jy ! Component: 750 - total flux cleaned = -0.00439327 Jy ! Component: 800 - total flux cleaned = -0.00443421 Jy ! Component: 850 - total flux cleaned = -0.0045533 Jy ! Component: 900 - total flux cleaned = -0.00447504 Jy ! Component: 950 - total flux cleaned = -0.00462888 Jy ! Component: 1000 - total flux cleaned = -0.00466707 Jy ! Component: 1050 - total flux cleaned = -0.00455611 Jy ! Component: 1100 - total flux cleaned = -0.00455593 Jy ! Component: 1150 - total flux cleaned = -0.00437479 Jy ! Component: 1200 - total flux cleaned = -0.0042678 Jy ! Component: 1250 - total flux cleaned = -0.00405745 Jy ! Component: 1300 - total flux cleaned = -0.00395404 Jy ! Component: 1350 - total flux cleaned = -0.00381774 Jy ! Component: 1400 - total flux cleaned = -0.00364962 Jy ! Component: 1450 - total flux cleaned = -0.0034837 Jy ! Component: 1500 - total flux cleaned = -0.00348341 Jy ! Component: 1550 - total flux cleaned = -0.00328897 Jy ! Component: 1600 - total flux cleaned = -0.00312889 Jy ! Component: 1650 - total flux cleaned = -0.003003 Jy ! Component: 1700 - total flux cleaned = -0.00294077 Jy ! Component: 1750 - total flux cleaned = -0.00284845 Jy ! Component: 1800 - total flux cleaned = -0.00278761 Jy ! Component: 1850 - total flux cleaned = -0.00272748 Jy ! Component: 1900 - total flux cleaned = -0.00263843 Jy ! Component: 1950 - total flux cleaned = -0.00263791 Jy ! Component: 2000 - total flux cleaned = -0.00243401 Jy ! Total flux subtracted in 2048 components = -0.00231884 Jy ! Clean residual min=-0.001716 max=0.001740 Jy/beam ! Clean residual mean=0.000028 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.240283 Jy keep ! Adding 128 model components to the UV plane model. ! The established model now contains 307 components and 0.240283 Jy ![Exited script file: muppet] wmap "J1425-2513_S_2004_05_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.992 x 8.232 at -3.78 degrees (North through East) ! Clean map min=-0.0031221 max=0.19577 Jy/beam ! Writing clean map to FITS file: J1425-2513_S_2004_05_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.195768 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000596835 device "J1425-2513_S_2004_05_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J1425-2513_S_2004_05_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.914607 0.914607 1.82921 3.65843 7.31685 14.6337 29.2674 58.5348 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.195 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.992 x 8.232 at -3.78 degrees (North through East) ! Clean map min=-0.0031221 max=0.19577 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1425-2513_S_2004_05_08_yyk\_map.gif/gif" ! Attempting to open device: 'J1425-2513_S_2004_05_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1425-2513_S_2004_05_08_yyk_uvs.log closed on Wed Dec 7 00:30:31 2005