! Started logfile: J1357-1527_S_2004_05_27_yyk_uvs.log on Wed Dec 7 00:29:12 2005 obs J1357-1527_S_2004_05_27_yyk_uve.fits ! Reading UV FITS file: J1357-1527_S_2004_05_27_yyk_uve.fits ! AN table 1: 9 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.728395 visibilities/baseline/integration-bin. ! Found source: J1357-1527 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1384 lines of history. ! ! Reading 1180 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1357-1527_S_2004_05_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.635107 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.386166Jy sigma=7.053893 ! Fit after self-cal, rms=0.386093Jy sigma=7.051971 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.426 mas, bmaj=6.626 mas, bpa=0.4866 degrees ! Estimated noise=1.67332 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.527468 Jy ! Component: 100 - total flux cleaned = 0.611655 Jy ! Total flux subtracted in 100 components = 0.611655 Jy ! Clean residual min=-0.013292 max=0.020815 Jy/beam ! Clean residual mean=0.000008 rms=0.004328 Jy/beam ! Combined flux in latest and established models = 0.611655 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.611655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095717Jy sigma=1.716004 ! Fit after self-cal, rms=0.095449Jy sigma=1.712632 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.156 mas, bmaj=8.18 mas, bpa=0.1369 degrees ! Estimated noise=1.21576 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0405188 Jy ! Component: 100 - total flux cleaned = 0.0552115 Jy ! Component: 150 - total flux cleaned = 0.061826 Jy ! Component: 200 - total flux cleaned = 0.0634699 Jy ! Total flux subtracted in 200 components = 0.0634699 Jy ! Clean residual min=-0.012521 max=0.015110 Jy/beam ! Clean residual mean=-0.000232 rms=0.003233 Jy/beam ! Combined flux in latest and established models = 0.675125 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 28 components and 0.675125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083471Jy sigma=1.493539 ! Fit after self-cal, rms=0.083334Jy sigma=1.492243 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00203 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.04 HN 0.99 KP 0.99 ! LA 1.07 MK 0.97 NL 0.99 OV 0.97 ! PT 1.03 SC 0.94 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.972607 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 1.12 KP 1.01 ! LA 1.03 MK 1.03 NL 1.04 OV 1.03 ! PT 0.96 SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.03084 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.91 HN 0.98 KP 0.90 ! LA 1.00* MK 0.98 NL 0.99 OV 0.84 ! PT 0.93 SC 1.11 ! ! ! Fit before self-cal, rms=0.083334Jy sigma=1.492243 ! Fit after self-cal, rms=0.070824Jy sigma=1.282067 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070824Jy sigma=1.282067 ! Fit after self-cal, rms=0.070834Jy sigma=1.282012 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.172 mas, bmaj=8.24 mas, bpa=0.07305 degrees ! Estimated noise=1.20876 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00165243 Jy ! Component: 100 - total flux cleaned = -0.00187587 Jy ! Component: 150 - total flux cleaned = -0.00197211 Jy ! Component: 200 - total flux cleaned = -0.00189227 Jy ! Total flux subtracted in 200 components = -0.00189227 Jy ! Clean residual min=-0.007947 max=0.010549 Jy/beam ! Clean residual mean=-0.000045 rms=0.002268 Jy/beam ! Combined flux in latest and established models = 0.673233 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 35 components and 0.673233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070705Jy sigma=1.277436 ! Fit after self-cal, rms=0.070654Jy sigma=1.277032 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070654Jy sigma=1.277032 ! Fit after self-cal, rms=0.069855Jy sigma=1.259573 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, 12). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118437 Jy ! Component: 100 - total flux cleaned = 0.0150277 Jy ! Component: 150 - total flux cleaned = 0.0153537 Jy ! Component: 200 - total flux cleaned = 0.0150815 Jy ! Total flux subtracted in 200 components = 0.0150815 Jy ! Clean residual min=-0.006589 max=0.006671 Jy/beam ! Clean residual mean=-0.000083 rms=0.001832 Jy/beam ! Combined flux in latest and established models = 0.688314 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 60 components and 0.688314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068372Jy sigma=1.231136 ! Fit after self-cal, rms=0.068259Jy sigma=1.228066 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.172 x 8.24 at 0.07305 degrees (North through East) ! Clean map min=-0.0065159 max=0.60994 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068259Jy sigma=1.228066 ! Fit after self-cal, rms=0.059317Jy sigma=1.073649 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059317Jy sigma=1.073649 ! Fit after self-cal, rms=0.059327Jy sigma=1.073559 ! Inverting map and beam ! Estimated beam: bmin=3.155 mas, bmaj=8.206 mas, bpa=0.06137 degrees ! Estimated noise=1.20382 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00354261 Jy ! Component: 100 - total flux cleaned = 0.00491758 Jy ! Component: 150 - total flux cleaned = 0.00541624 Jy ! Component: 200 - total flux cleaned = 0.00541571 Jy ! Total flux subtracted in 200 components = 0.00541571 Jy ! Clean residual min=-0.006115 max=0.005611 Jy/beam ! Clean residual mean=-0.000003 rms=0.001625 Jy/beam ! Combined flux in latest and established models = 0.69373 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 81 components and 0.69373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058879Jy sigma=1.063541 ! Fit after self-cal, rms=0.058856Jy sigma=1.062971 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058856Jy sigma=1.062971 ! Fit after self-cal, rms=0.057700Jy sigma=1.047169 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057700Jy sigma=1.047169 ! Fit after self-cal, rms=0.057700Jy sigma=1.047167 ! Inverting map and beam ! Estimated beam: bmin=3.151 mas, bmaj=8.195 mas, bpa=0.01356 degrees ! Estimated noise=1.2026 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00231799 Jy ! Component: 100 - total flux cleaned = 0.00292561 Jy ! Component: 150 - total flux cleaned = 0.00292148 Jy ! Component: 200 - total flux cleaned = 0.00291888 Jy ! Total flux subtracted in 200 components = 0.00291888 Jy ! Clean residual min=-0.006047 max=0.005573 Jy/beam ! Clean residual mean=-0.000001 rms=0.001618 Jy/beam ! Combined flux in latest and established models = 0.696649 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 89 components and 0.696649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057448Jy sigma=1.041251 ! Fit after self-cal, rms=0.057432Jy sigma=1.040928 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.693 mas, bmaj=17.12 mas, bpa=5.932 degrees ! Estimated noise=1.52061 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112941 Jy ! Component: 100 - total flux cleaned = 0.00122048 Jy ! Component: 150 - total flux cleaned = 0.0012193 Jy ! Component: 200 - total flux cleaned = 0.00114381 Jy ! Total flux subtracted in 200 components = 0.00114381 Jy ! Clean residual min=-0.006360 max=0.006323 Jy/beam ! Clean residual mean=-0.000012 rms=0.001968 Jy/beam ! Combined flux in latest and established models = 0.697793 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 98 components and 0.697793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057437Jy sigma=1.039022 ! Fit after self-cal, rms=0.057403Jy sigma=1.038668 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.424 mas, bmaj=6.638 mas, bpa=0.403 degrees ! Estimated noise=1.65666 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.52223 Jy ! Component: 100 - total flux cleaned = 0.608517 Jy ! Component: 150 - total flux cleaned = 0.637461 Jy ! Component: 200 - total flux cleaned = 0.653495 Jy ! Total flux subtracted in 200 components = 0.653495 Jy ! Clean residual min=-0.007374 max=0.008636 Jy/beam ! Clean residual mean=0.000060 rms=0.002224 Jy/beam ! Combined flux in latest and established models = 0.653496 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.653496 Jy ! Inverting map and beam ! Estimated beam: bmin=3.151 mas, bmaj=8.195 mas, bpa=0.01356 degrees ! Estimated noise=1.2026 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0185597 Jy ! Component: 100 - total flux cleaned = 0.0292765 Jy ! Component: 150 - total flux cleaned = 0.0359655 Jy ! Component: 200 - total flux cleaned = 0.0398224 Jy ! Total flux subtracted in 200 components = 0.0398224 Jy ! Clean residual min=-0.006305 max=0.006219 Jy/beam ! Clean residual mean=0.000006 rms=0.001700 Jy/beam ! Combined flux in latest and established models = 0.693318 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 72 components and 0.693318 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.693 mas, bmaj=17.12 mas, bpa=5.932 degrees ! Estimated noise=1.52061 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0030308 Jy ! Component: 100 - total flux cleaned = 0.00303492 Jy ! Component: 150 - total flux cleaned = 0.00313337 Jy ! Component: 200 - total flux cleaned = 0.00329858 Jy ! Total flux subtracted in 200 components = 0.00329858 Jy ! Clean residual min=-0.006484 max=0.006789 Jy/beam ! Clean residual mean=-0.000007 rms=0.002019 Jy/beam ! Combined flux in latest and established models = 0.696616 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 83 components and 0.696616 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.151 mas, bmaj=8.195 mas, bpa=0.01356 degrees ! Estimated noise=1.2026 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000573892 Jy ! Component: 100 - total flux cleaned = -0.00067975 Jy ! Component: 150 - total flux cleaned = -0.000765684 Jy ! Component: 200 - total flux cleaned = -0.000684902 Jy ! Total flux subtracted in 200 components = -0.000684902 Jy ! Clean residual min=-0.006050 max=0.005615 Jy/beam ! Clean residual mean=0.000000 rms=0.001587 Jy/beam ! Combined flux in latest and established models = 0.695932 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 99 components and 0.695931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057352Jy sigma=1.037910 ! Fit after self-cal, rms=0.057301Jy sigma=1.037253 wmodel J1357-1527_S_2004_05_27_yyk\_map.mod ! Writing 99 model components to file: J1357-1527_S_2004_05_27_yyk_map.mod wobs J1357-1527_S_2004_05_27_yyk\_uvs.fits ! Writing UV FITS file: J1357-1527_S_2004_05_27_yyk_uvs.fits wwins J1357-1527_S_2004_05_27_yyk\_map.win ! wwins: Wrote 2 windows to J1357-1527_S_2004_05_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00127107 Jy ! Component: 100 - total flux cleaned = -0.00155883 Jy ! Component: 150 - total flux cleaned = -0.00130177 Jy ! Component: 200 - total flux cleaned = -0.000971383 Jy ! Component: 250 - total flux cleaned = -0.000575234 Jy ! Component: 300 - total flux cleaned = -0.000195207 Jy ! Component: 350 - total flux cleaned = 2.47436e-05 Jy ! Component: 400 - total flux cleaned = 0.000523218 Jy ! Component: 450 - total flux cleaned = 0.000936674 Jy ! Component: 500 - total flux cleaned = 0.00140517 Jy ! Component: 550 - total flux cleaned = 0.00179587 Jy ! Component: 600 - total flux cleaned = 0.00211274 Jy ! Component: 650 - total flux cleaned = 0.00242305 Jy ! Component: 700 - total flux cleaned = 0.00278623 Jy ! Component: 750 - total flux cleaned = 0.00284598 Jy ! Component: 800 - total flux cleaned = 0.00307892 Jy ! Component: 850 - total flux cleaned = 0.00330655 Jy ! Component: 900 - total flux cleaned = 0.00358414 Jy ! Component: 950 - total flux cleaned = 0.00380228 Jy ! Component: 1000 - total flux cleaned = 0.00417617 Jy ! Component: 1050 - total flux cleaned = 0.00428127 Jy ! Component: 1100 - total flux cleaned = 0.00459114 Jy ! Component: 1150 - total flux cleaned = 0.00484375 Jy ! Component: 1200 - total flux cleaned = 0.00499308 Jy ! Component: 1250 - total flux cleaned = 0.00513923 Jy ! Component: 1300 - total flux cleaned = 0.00513902 Jy ! Component: 1350 - total flux cleaned = 0.00504549 Jy ! Component: 1400 - total flux cleaned = 0.00504635 Jy ! Component: 1450 - total flux cleaned = 0.0050469 Jy ! Component: 1500 - total flux cleaned = 0.00509109 Jy ! Component: 1550 - total flux cleaned = 0.00500192 Jy ! Component: 1600 - total flux cleaned = 0.0050464 Jy ! Component: 1650 - total flux cleaned = 0.00513355 Jy ! Component: 1700 - total flux cleaned = 0.00521826 Jy ! Component: 1750 - total flux cleaned = 0.00534336 Jy ! Component: 1800 - total flux cleaned = 0.0053427 Jy ! Component: 1850 - total flux cleaned = 0.00550542 Jy ! Component: 1900 - total flux cleaned = 0.00558561 Jy ! Component: 1950 - total flux cleaned = 0.00566427 Jy ! Component: 2000 - total flux cleaned = 0.00586034 Jy ! Total flux subtracted in 2048 components = 0.0059377 Jy ! Clean residual min=-0.002407 max=0.002679 Jy/beam ! Clean residual mean=0.000016 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 0.701869 Jy keep ! Adding 147 model components to the UV plane model. ! The established model now contains 246 components and 0.701869 Jy ![Exited script file: muppet] wmap "J1357-1527_S_2004_05_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.151 x 8.195 at 0.01356 degrees (North through East) ! Clean map min=-0.0042618 max=0.60466 Jy/beam ! Writing clean map to FITS file: J1357-1527_S_2004_05_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.60466 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000807673 device "J1357-1527_S_2004_05_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J1357-1527_S_2004_05_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.400724 0.400724 0.801448 1.6029 3.20579 6.41159 12.8232 25.6464 51.2927 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0024 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.604 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.151 x 8.195 at 0.01356 degrees (North through East) ! Clean map min=-0.0042618 max=0.60466 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1357-1527_S_2004_05_27_yyk\_map.gif/gif" ! Attempting to open device: 'J1357-1527_S_2004_05_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1357-1527_S_2004_05_27_yyk_uvs.log closed on Wed Dec 7 00:29:16 2005