! Started logfile: J1357-1527_S_2004_05_08_yyk_uvs.log on Wed Dec 7 00:29:08 2005 obs J1357-1527_S_2004_05_08_yyk_uve.fits ! Reading UV FITS file: J1357-1527_S_2004_05_08_yyk_uve.fits ! AN table 1: 9 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.580247 visibilities/baseline/integration-bin. ! Found source: J1357-1527 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1434 lines of history. ! ! Reading 940 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1357-1527_S_2004_05_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.65185 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.562365Jy sigma=9.400816 ! Fit after self-cal, rms=0.369374Jy sigma=6.338963 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.408 mas, bmaj=6.508 mas, bpa=5.25 degrees ! Estimated noise=2.40327 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.547129 Jy ! Component: 100 - total flux cleaned = 0.629145 Jy ! Total flux subtracted in 100 components = 0.629145 Jy ! Clean residual min=-0.015386 max=0.019126 Jy/beam ! Clean residual mean=0.000090 rms=0.004539 Jy/beam ! Combined flux in latest and established models = 0.629145 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.629145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097959Jy sigma=1.510270 ! Fit after self-cal, rms=0.097731Jy sigma=1.505955 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.246 mas, bmaj=8.173 mas, bpa=7.223 degrees ! Estimated noise=1.43349 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0312262 Jy ! Component: 100 - total flux cleaned = 0.0418652 Jy ! Component: 150 - total flux cleaned = 0.0452075 Jy ! Component: 200 - total flux cleaned = 0.0459228 Jy ! Total flux subtracted in 200 components = 0.0459228 Jy ! Clean residual min=-0.012752 max=0.011843 Jy/beam ! Clean residual mean=-0.000160 rms=0.003284 Jy/beam ! Combined flux in latest and established models = 0.675067 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 33 components and 0.675067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090928Jy sigma=1.378661 ! Fit after self-cal, rms=0.090846Jy sigma=1.377462 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.992767 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 0.98 KP 1.00* ! LA 1.09 MK 0.97 NL 1.00 OV 0.99 ! PT 1.01 SC 0.96 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.984418 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 1.09 KP 1.00* ! LA 1.04 MK 1.04 NL 1.02 OV 1.00 ! PT 0.93 SC 1.01 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.01867 ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.88 HN 1.00 KP 1.00* ! LA 0.95 MK 1.00 NL 1.06 OV 1.02 ! PT 1.02 SC 0.99 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.011 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.91 HN 0.99 KP 1.00* ! LA 1.00* MK 0.98 NL 0.98 OV 1.00* ! PT 0.92 SC 1.13 ! ! ! Fit before self-cal, rms=0.090846Jy sigma=1.377462 ! Fit after self-cal, rms=0.077229Jy sigma=1.113916 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077229Jy sigma=1.113916 ! Fit after self-cal, rms=0.077273Jy sigma=1.113652 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.261 mas, bmaj=8.209 mas, bpa=7.069 degrees ! Estimated noise=1.42994 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000397653 Jy ! Component: 100 - total flux cleaned = 0.000179643 Jy ! Component: 150 - total flux cleaned = -5.63285e-06 Jy ! Component: 200 - total flux cleaned = -0.00015717 Jy ! Total flux subtracted in 200 components = -0.00015717 Jy ! Clean residual min=-0.007595 max=0.007986 Jy/beam ! Clean residual mean=-0.000012 rms=0.001985 Jy/beam ! Combined flux in latest and established models = 0.67491 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 45 components and 0.67491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077200Jy sigma=1.111860 ! Fit after self-cal, rms=0.077150Jy sigma=1.111292 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077150Jy sigma=1.111292 ! Fit after self-cal, rms=0.074380Jy sigma=1.069909 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000399661 Jy ! Component: 100 - total flux cleaned = 0.000193847 Jy ! Component: 150 - total flux cleaned = 7.03428e-05 Jy ! Component: 200 - total flux cleaned = 6.87884e-05 Jy ! Total flux subtracted in 200 components = 6.87884e-05 Jy ! Clean residual min=-0.007607 max=0.007908 Jy/beam ! Clean residual mean=-0.000011 rms=0.001970 Jy/beam ! Combined flux in latest and established models = 0.674979 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 49 components and 0.674979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074344Jy sigma=1.068899 ! Fit after self-cal, rms=0.074154Jy sigma=1.066720 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.261 x 8.209 at 7.069 degrees (North through East) ! Clean map min=-0.0074178 max=0.63719 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074154Jy sigma=1.066720 ! Fit after self-cal, rms=0.068573Jy sigma=0.966134 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068573Jy sigma=0.966134 ! Fit after self-cal, rms=0.068541Jy sigma=0.965958 ! Inverting map and beam ! Estimated beam: bmin=3.253 mas, bmaj=8.154 mas, bpa=6.997 degrees ! Estimated noise=1.42962 mJy/beam. ! Added new window around map position (5.5, 7.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00789774 Jy ! Component: 100 - total flux cleaned = 0.00995728 Jy ! Component: 150 - total flux cleaned = 0.0106439 Jy ! Component: 200 - total flux cleaned = 0.0109339 Jy ! Total flux subtracted in 200 components = 0.0109339 Jy ! Clean residual min=-0.003763 max=0.004630 Jy/beam ! Clean residual mean=0.000001 rms=0.001254 Jy/beam ! Combined flux in latest and established models = 0.685913 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 73 components and 0.685913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067995Jy sigma=0.952211 ! Fit after self-cal, rms=0.067940Jy sigma=0.951381 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067940Jy sigma=0.951381 ! Fit after self-cal, rms=0.065300Jy sigma=0.911489 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065300Jy sigma=0.911489 ! Fit after self-cal, rms=0.065301Jy sigma=0.911480 ! Inverting map and beam ! Estimated beam: bmin=3.246 mas, bmaj=8.137 mas, bpa=7.034 degrees ! Estimated noise=1.42949 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00312737 Jy ! Component: 100 - total flux cleaned = 0.00407507 Jy ! Component: 150 - total flux cleaned = 0.00465718 Jy ! Component: 200 - total flux cleaned = 0.00475101 Jy ! Total flux subtracted in 200 components = 0.00475101 Jy ! Clean residual min=-0.003675 max=0.004516 Jy/beam ! Clean residual mean=0.000015 rms=0.001183 Jy/beam ! Combined flux in latest and established models = 0.690664 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 100 components and 0.690664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065148Jy sigma=0.908073 ! Fit after self-cal, rms=0.065120Jy sigma=0.907794 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.991 mas, bmaj=15.55 mas, bpa=10.56 degrees ! Estimated noise=1.79151 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000498622 Jy ! Component: 100 - total flux cleaned = -0.000608193 Jy ! Component: 150 - total flux cleaned = -0.000722038 Jy ! Component: 200 - total flux cleaned = -0.000791212 Jy ! Total flux subtracted in 200 components = -0.000791212 Jy ! Clean residual min=-0.004333 max=0.003917 Jy/beam ! Clean residual mean=0.000024 rms=0.001374 Jy/beam ! Combined flux in latest and established models = 0.689873 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 120 components and 0.689872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065095Jy sigma=0.907356 ! Fit after self-cal, rms=0.065079Jy sigma=0.907207 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.407 mas, bmaj=6.497 mas, bpa=5.024 degrees ! Estimated noise=2.38899 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.54411 Jy ! Component: 100 - total flux cleaned = 0.628845 Jy ! Component: 150 - total flux cleaned = 0.654947 Jy ! Component: 200 - total flux cleaned = 0.667915 Jy ! Total flux subtracted in 200 components = 0.667915 Jy ! Clean residual min=-0.006913 max=0.007589 Jy/beam ! Clean residual mean=0.000078 rms=0.002132 Jy/beam ! Combined flux in latest and established models = 0.667915 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.667915 Jy ! Inverting map and beam ! Estimated beam: bmin=3.246 mas, bmaj=8.137 mas, bpa=7.034 degrees ! Estimated noise=1.42949 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113567 Jy ! Component: 100 - total flux cleaned = 0.0174125 Jy ! Component: 150 - total flux cleaned = 0.0203824 Jy ! Component: 200 - total flux cleaned = 0.0212134 Jy ! Total flux subtracted in 200 components = 0.0212134 Jy ! Clean residual min=-0.003755 max=0.004425 Jy/beam ! Clean residual mean=0.000026 rms=0.001231 Jy/beam ! Combined flux in latest and established models = 0.689129 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 66 components and 0.689129 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.991 mas, bmaj=15.55 mas, bpa=10.56 degrees ! Estimated noise=1.79151 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000157104 Jy ! Component: 100 - total flux cleaned = -1.71494e-05 Jy ! Component: 150 - total flux cleaned = 4.43882e-05 Jy ! Component: 200 - total flux cleaned = 9.58027e-05 Jy ! Total flux subtracted in 200 components = 9.58027e-05 Jy ! Clean residual min=-0.004609 max=0.003873 Jy/beam ! Clean residual mean=0.000030 rms=0.001400 Jy/beam ! Combined flux in latest and established models = 0.689224 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 95 components and 0.689224 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.246 mas, bmaj=8.137 mas, bpa=7.034 degrees ! Estimated noise=1.42949 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -6.78672e-05 Jy ! Component: 100 - total flux cleaned = 9.52635e-05 Jy ! Component: 150 - total flux cleaned = 9.75916e-05 Jy ! Component: 200 - total flux cleaned = 5.7713e-05 Jy ! Total flux subtracted in 200 components = 5.7713e-05 Jy ! Clean residual min=-0.003706 max=0.004497 Jy/beam ! Clean residual mean=0.000020 rms=0.001167 Jy/beam ! Combined flux in latest and established models = 0.689282 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 111 components and 0.689282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064976Jy sigma=0.906475 ! Fit after self-cal, rms=0.064950Jy sigma=0.906341 wmodel J1357-1527_S_2004_05_08_yyk\_map.mod ! Writing 111 model components to file: J1357-1527_S_2004_05_08_yyk_map.mod wobs J1357-1527_S_2004_05_08_yyk\_uvs.fits ! Writing UV FITS file: J1357-1527_S_2004_05_08_yyk_uvs.fits wwins J1357-1527_S_2004_05_08_yyk\_map.win ! wwins: Wrote 2 windows to J1357-1527_S_2004_05_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195219 Jy ! Component: 100 - total flux cleaned = 0.003133 Jy ! Component: 150 - total flux cleaned = 0.00365116 Jy ! Component: 200 - total flux cleaned = 0.00395617 Jy ! Component: 250 - total flux cleaned = 0.00436175 Jy ! Component: 300 - total flux cleaned = 0.00458267 Jy ! Component: 350 - total flux cleaned = 0.004794 Jy ! Component: 400 - total flux cleaned = 0.00489594 Jy ! Component: 450 - total flux cleaned = 0.00504314 Jy ! Component: 500 - total flux cleaned = 0.00470928 Jy ! Component: 550 - total flux cleaned = 0.00447844 Jy ! Component: 600 - total flux cleaned = 0.00434357 Jy ! Component: 650 - total flux cleaned = 0.004079 Jy ! Component: 700 - total flux cleaned = 0.0039496 Jy ! Component: 750 - total flux cleaned = 0.00369675 Jy ! Component: 800 - total flux cleaned = 0.00369691 Jy ! Component: 850 - total flux cleaned = 0.0035758 Jy ! Component: 900 - total flux cleaned = 0.00345726 Jy ! Component: 950 - total flux cleaned = 0.00345664 Jy ! Component: 1000 - total flux cleaned = 0.00337938 Jy ! Component: 1050 - total flux cleaned = 0.00322782 Jy ! Component: 1100 - total flux cleaned = 0.00307967 Jy ! Component: 1150 - total flux cleaned = 0.0031159 Jy ! Component: 1200 - total flux cleaned = 0.00300681 Jy ! Component: 1250 - total flux cleaned = 0.00286489 Jy ! Component: 1300 - total flux cleaned = 0.00282968 Jy ! Component: 1350 - total flux cleaned = 0.00276046 Jy ! Component: 1400 - total flux cleaned = 0.00262498 Jy ! Component: 1450 - total flux cleaned = 0.00265843 Jy ! Component: 1500 - total flux cleaned = 0.0024601 Jy ! Component: 1550 - total flux cleaned = 0.00242792 Jy ! Component: 1600 - total flux cleaned = 0.00239641 Jy ! Component: 1650 - total flux cleaned = 0.00230197 Jy ! Component: 1700 - total flux cleaned = 0.00227111 Jy ! Component: 1750 - total flux cleaned = 0.00227151 Jy ! Component: 1800 - total flux cleaned = 0.0022714 Jy ! Component: 1850 - total flux cleaned = 0.00230102 Jy ! Component: 1900 - total flux cleaned = 0.0022127 Jy ! Component: 1950 - total flux cleaned = 0.00230089 Jy ! Component: 2000 - total flux cleaned = 0.00230102 Jy ! Total flux subtracted in 2048 components = 0.00235791 Jy ! Clean residual min=-0.001451 max=0.001733 Jy/beam ! Clean residual mean=-0.000002 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.69164 Jy keep ! Adding 141 model components to the UV plane model. ! The established model now contains 252 components and 0.69164 Jy ![Exited script file: muppet] wmap "J1357-1527_S_2004_05_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.246 x 8.137 at 7.034 degrees (North through East) ! Clean map min=-0.0028491 max=0.63641 Jy/beam ! Writing clean map to FITS file: J1357-1527_S_2004_05_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.63641 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000578149 device "J1357-1527_S_2004_05_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J1357-1527_S_2004_05_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.272536 0.272536 0.545072 1.09014 2.18029 4.36058 8.72115 17.4423 34.8846 69.7692 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.636 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.246 x 8.137 at 7.034 degrees (North through East) ! Clean map min=-0.0028491 max=0.63641 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1357-1527_S_2004_05_08_yyk\_map.gif/gif" ! Attempting to open device: 'J1357-1527_S_2004_05_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1357-1527_S_2004_05_08_yyk_uvs.log closed on Wed Dec 7 00:29:12 2005