! Started logfile: J1354-0206_S_2004_05_27_yyk_uvs.log on Wed Dec 7 00:28:55 2005 obs J1354-0206_S_2004_05_27_yyk_uve.fits ! Reading UV FITS file: J1354-0206_S_2004_05_27_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.805556 visibilities/baseline/integration-bin. ! Found source: J1354-0206 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1384 lines of history. ! ! Reading 580 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1354-0206_S_2004_05_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.747106 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.280718Jy sigma=5.394556 ! Fit after self-cal, rms=0.280546Jy sigma=5.391465 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.646 mas, bmaj=7.306 mas, bpa=-2.907 degrees ! Estimated noise=2.14185 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.635386 Jy ! Component: 100 - total flux cleaned = 0.730115 Jy ! Total flux subtracted in 100 components = 0.730115 Jy ! Clean residual min=-0.018091 max=0.030083 Jy/beam ! Clean residual mean=-0.000019 rms=0.006176 Jy/beam ! Combined flux in latest and established models = 0.730115 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.730115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099494Jy sigma=1.758583 ! Fit after self-cal, rms=0.099376Jy sigma=1.756597 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.979 mas, bmaj=8.445 mas, bpa=-4.07 degrees ! Estimated noise=1.68136 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0393196 Jy ! Component: 100 - total flux cleaned = 0.0546836 Jy ! Component: 150 - total flux cleaned = 0.0615131 Jy ! Component: 200 - total flux cleaned = 0.0628432 Jy ! Total flux subtracted in 200 components = 0.0628432 Jy ! Clean residual min=-0.012906 max=0.013705 Jy/beam ! Clean residual mean=-0.000171 rms=0.003530 Jy/beam ! Combined flux in latest and established models = 0.792958 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 40 components and 0.792958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087204Jy sigma=1.524895 ! Fit after self-cal, rms=0.087127Jy sigma=1.523534 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.970878 ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.00 HN 1.04 KP 1.01 ! LA 1.04 MK 1.04 NL 1.01 OV 1.04 ! PT 0.96 SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00056 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.90 HN 1.02 KP 0.98 ! LA 0.92 MK 1.03 NL 1.07 OV 1.01 ! PT 1.06 SC 1.00 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.01572 ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.91 HN 0.96 KP 0.91 ! LA 1.00* MK 1.02 NL 0.98 OV 0.89 ! PT 0.94 SC 1.11 ! ! ! Fit before self-cal, rms=0.087127Jy sigma=1.523534 ! Fit after self-cal, rms=0.071118Jy sigma=1.210686 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071118Jy sigma=1.210686 ! Fit after self-cal, rms=0.071121Jy sigma=1.210625 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.03 mas, bmaj=8.605 mas, bpa=-4.016 degrees ! Estimated noise=1.66274 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0115105 Jy ! Component: 100 - total flux cleaned = -0.0162841 Jy ! Component: 150 - total flux cleaned = -0.017996 Jy ! Component: 200 - total flux cleaned = -0.0181619 Jy ! Total flux subtracted in 200 components = -0.0181619 Jy ! Clean residual min=-0.008751 max=0.009488 Jy/beam ! Clean residual mean=-0.000076 rms=0.002591 Jy/beam ! Combined flux in latest and established models = 0.774796 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 57 components and 0.774796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070647Jy sigma=1.181451 ! Fit after self-cal, rms=0.070590Jy sigma=1.180792 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070590Jy sigma=1.180792 ! Fit after self-cal, rms=0.069422Jy sigma=1.159614 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000550959 Jy ! Component: 100 - total flux cleaned = -0.000845444 Jy ! Component: 150 - total flux cleaned = -0.000972998 Jy ! Component: 200 - total flux cleaned = -0.00114572 Jy ! Total flux subtracted in 200 components = -0.00114572 Jy ! Clean residual min=-0.008600 max=0.009127 Jy/beam ! Clean residual mean=-0.000074 rms=0.002570 Jy/beam ! Combined flux in latest and established models = 0.77365 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 61 components and 0.77365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069257Jy sigma=1.156992 ! Fit after self-cal, rms=0.068935Jy sigma=1.154180 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.03 x 8.605 at -4.016 degrees (North through East) ! Clean map min=-0.0084818 max=0.73029 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068935Jy sigma=1.154180 ! Fit after self-cal, rms=0.064533Jy sigma=1.048542 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064533Jy sigma=1.048542 ! Fit after self-cal, rms=0.064419Jy sigma=1.047673 ! Inverting map and beam ! Estimated beam: bmin=3.036 mas, bmaj=8.655 mas, bpa=-4.175 degrees ! Estimated noise=1.67078 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132222 Jy ! Component: 100 - total flux cleaned = 0.00121479 Jy ! Component: 150 - total flux cleaned = 0.00102937 Jy ! Component: 200 - total flux cleaned = 0.000951785 Jy ! Total flux subtracted in 200 components = 0.000951785 Jy ! Clean residual min=-0.007997 max=0.009077 Jy/beam ! Clean residual mean=-0.000059 rms=0.002485 Jy/beam ! Combined flux in latest and established models = 0.774602 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 67 components and 0.774602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063947Jy sigma=1.041506 ! Fit after self-cal, rms=0.063882Jy sigma=1.040919 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063882Jy sigma=1.040919 ! Fit after self-cal, rms=0.057485Jy sigma=0.940761 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057485Jy sigma=0.940761 ! Fit after self-cal, rms=0.057468Jy sigma=0.940537 ! Inverting map and beam ! Estimated beam: bmin=3.029 mas, bmaj=8.658 mas, bpa=-4.355 degrees ! Estimated noise=1.66851 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000322283 Jy ! Component: 100 - total flux cleaned = 0.000558663 Jy ! Component: 150 - total flux cleaned = 0.000677382 Jy ! Component: 200 - total flux cleaned = 0.000771515 Jy ! Total flux subtracted in 200 components = 0.000771515 Jy ! Clean residual min=-0.007514 max=0.008404 Jy/beam ! Clean residual mean=0.000021 rms=0.002153 Jy/beam ! Combined flux in latest and established models = 0.775373 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 77 components and 0.775373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057309Jy sigma=0.937119 ! Fit after self-cal, rms=0.057288Jy sigma=0.936820 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.595 mas, bmaj=15.12 mas, bpa=-4.668 degrees ! Estimated noise=2.14326 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106714 Jy ! Component: 100 - total flux cleaned = 0.00106796 Jy ! Component: 150 - total flux cleaned = 0.0010678 Jy ! Component: 200 - total flux cleaned = 0.00106937 Jy ! Total flux subtracted in 200 components = 0.00106937 Jy ! Clean residual min=-0.010098 max=0.009814 Jy/beam ! Clean residual mean=0.000041 rms=0.003266 Jy/beam ! Combined flux in latest and established models = 0.776443 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 83 components and 0.776443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057432Jy sigma=0.938776 ! Fit after self-cal, rms=0.057240Jy sigma=0.936118 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.657 mas, bmaj=7.413 mas, bpa=-3.195 degrees ! Estimated noise=2.13779 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.634198 Jy ! Component: 100 - total flux cleaned = 0.726174 Jy ! Component: 150 - total flux cleaned = 0.755554 Jy ! Component: 200 - total flux cleaned = 0.768366 Jy ! Total flux subtracted in 200 components = 0.768366 Jy ! Clean residual min=-0.009561 max=0.008182 Jy/beam ! Clean residual mean=0.000019 rms=0.002409 Jy/beam ! Combined flux in latest and established models = 0.768366 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.768366 Jy ! Inverting map and beam ! Estimated beam: bmin=3.029 mas, bmaj=8.658 mas, bpa=-4.355 degrees ! Estimated noise=1.66851 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00568115 Jy ! Component: 100 - total flux cleaned = 0.00672457 Jy ! Component: 150 - total flux cleaned = 0.00746091 Jy ! Component: 200 - total flux cleaned = 0.0077953 Jy ! Total flux subtracted in 200 components = 0.0077953 Jy ! Clean residual min=-0.007415 max=0.008828 Jy/beam ! Clean residual mean=0.000019 rms=0.002241 Jy/beam ! Combined flux in latest and established models = 0.776162 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 28 components and 0.776162 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.595 mas, bmaj=15.12 mas, bpa=-4.668 degrees ! Estimated noise=2.14326 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113862 Jy ! Component: 100 - total flux cleaned = 0.00102874 Jy ! Component: 150 - total flux cleaned = 0.00102975 Jy ! Component: 200 - total flux cleaned = 0.0010281 Jy ! Total flux subtracted in 200 components = 0.0010281 Jy ! Clean residual min=-0.010072 max=0.009683 Jy/beam ! Clean residual mean=0.000037 rms=0.003265 Jy/beam ! Combined flux in latest and established models = 0.77719 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 39 components and 0.77719 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.029 mas, bmaj=8.658 mas, bpa=-4.355 degrees ! Estimated noise=1.66851 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000547211 Jy ! Component: 100 - total flux cleaned = -0.000108886 Jy ! Component: 150 - total flux cleaned = -1.5295e-05 Jy ! Component: 200 - total flux cleaned = -0.000100928 Jy ! Total flux subtracted in 200 components = -0.000100928 Jy ! Clean residual min=-0.007482 max=0.008717 Jy/beam ! Clean residual mean=0.000017 rms=0.002171 Jy/beam ! Combined flux in latest and established models = 0.777089 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 47 components and 0.777089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057339Jy sigma=0.940797 ! Fit after self-cal, rms=0.057286Jy sigma=0.939726 wmodel J1354-0206_S_2004_05_27_yyk\_map.mod ! Writing 47 model components to file: J1354-0206_S_2004_05_27_yyk_map.mod wobs J1354-0206_S_2004_05_27_yyk\_uvs.fits ! Writing UV FITS file: J1354-0206_S_2004_05_27_yyk_uvs.fits wwins J1354-0206_S_2004_05_27_yyk\_map.win ! wwins: Wrote 1 windows to J1354-0206_S_2004_05_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192264 Jy ! Component: 100 - total flux cleaned = 0.0025484 Jy ! Component: 150 - total flux cleaned = 0.00320798 Jy ! Component: 200 - total flux cleaned = 0.00433068 Jy ! Component: 250 - total flux cleaned = 0.0056713 Jy ! Component: 300 - total flux cleaned = 0.00711939 Jy ! Component: 350 - total flux cleaned = 0.00815518 Jy ! Component: 400 - total flux cleaned = 0.0092267 Jy ! Component: 450 - total flux cleaned = 0.0100946 Jy ! Component: 500 - total flux cleaned = 0.0110765 Jy ! Component: 550 - total flux cleaned = 0.0117991 Jy ! Component: 600 - total flux cleaned = 0.0124988 Jy ! Component: 650 - total flux cleaned = 0.0130364 Jy ! Component: 700 - total flux cleaned = 0.0131639 Jy ! Component: 750 - total flux cleaned = 0.013165 Jy ! Component: 800 - total flux cleaned = 0.0129857 Jy ! Component: 850 - total flux cleaned = 0.0131634 Jy ! Component: 900 - total flux cleaned = 0.0131639 Jy ! Component: 950 - total flux cleaned = 0.0133861 Jy ! Component: 1000 - total flux cleaned = 0.0134388 Jy ! Component: 1050 - total flux cleaned = 0.0135452 Jy ! Component: 1100 - total flux cleaned = 0.0136486 Jy ! Component: 1150 - total flux cleaned = 0.0136006 Jy ! Component: 1200 - total flux cleaned = 0.0135529 Jy ! Component: 1250 - total flux cleaned = 0.0136033 Jy ! Component: 1300 - total flux cleaned = 0.0135567 Jy ! Component: 1350 - total flux cleaned = 0.0136025 Jy ! Component: 1400 - total flux cleaned = 0.0135122 Jy ! Component: 1450 - total flux cleaned = 0.0135555 Jy ! Component: 1500 - total flux cleaned = 0.0132954 Jy ! Component: 1550 - total flux cleaned = 0.01321 Jy ! Component: 1600 - total flux cleaned = 0.0130011 Jy ! Component: 1650 - total flux cleaned = 0.0129605 Jy ! Component: 1700 - total flux cleaned = 0.0127589 Jy ! Component: 1750 - total flux cleaned = 0.0125228 Jy ! Component: 1800 - total flux cleaned = 0.0124452 Jy ! Component: 1850 - total flux cleaned = 0.0122539 Jy ! Component: 1900 - total flux cleaned = 0.0120658 Jy ! Component: 1950 - total flux cleaned = 0.0118428 Jy ! Component: 2000 - total flux cleaned = 0.011733 Jy ! Total flux subtracted in 2048 components = 0.0116242 Jy ! Clean residual min=-0.001899 max=0.002896 Jy/beam ! Clean residual mean=0.000001 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.788713 Jy keep ! Adding 136 model components to the UV plane model. ! The established model now contains 183 components and 0.788713 Jy ![Exited script file: muppet] wmap "J1354-0206_S_2004_05_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.029 x 8.658 at -4.355 degrees (North through East) ! Clean map min=-0.0047074 max=0.73566 Jy/beam ! Writing clean map to FITS file: J1354-0206_S_2004_05_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.735659 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000720368 device "J1354-0206_S_2004_05_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J1354-0206_S_2004_05_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.293764 0.293764 0.587529 1.17506 2.35011 4.70023 9.40046 18.8009 37.6018 75.2037 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.735 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.029 x 8.658 at -4.355 degrees (North through East) ! Clean map min=-0.0047074 max=0.73566 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1354-0206_S_2004_05_27_yyk\_map.gif/gif" ! Attempting to open device: 'J1354-0206_S_2004_05_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1354-0206_S_2004_05_27_yyk_uvs.log closed on Wed Dec 7 00:28:59 2005