! Started logfile: J1354-0206_S_2004_05_08_yyk_uvs.log on Wed Dec 7 00:28:51 2005 obs J1354-0206_S_2004_05_08_yyk_uve.fits ! Reading UV FITS file: J1354-0206_S_2004_05_08_yyk_uve.fits ! AN table 1: 6 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.781481 visibilities/baseline/integration-bin. ! Found source: J1354-0206 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1432 lines of history. ! ! Reading 844 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1354-0206_S_2004_05_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.783764 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.254049Jy sigma=4.554948 ! Fit after self-cal, rms=0.253969Jy sigma=4.552528 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.99 mas, bmaj=6.895 mas, bpa=-2.988 degrees ! Estimated noise=1.87488 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.659097 Jy ! Component: 100 - total flux cleaned = 0.753468 Jy ! Total flux subtracted in 100 components = 0.753468 Jy ! Clean residual min=-0.015049 max=0.023362 Jy/beam ! Clean residual mean=0.000127 rms=0.005138 Jy/beam ! Combined flux in latest and established models = 0.753468 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.753468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117655Jy sigma=1.738000 ! Fit after self-cal, rms=0.117646Jy sigma=1.737893 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.664 mas, bmaj=8.566 mas, bpa=-3.954 degrees ! Estimated noise=1.40572 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0362482 Jy ! Component: 100 - total flux cleaned = 0.0493358 Jy ! Component: 150 - total flux cleaned = 0.0535316 Jy ! Component: 200 - total flux cleaned = 0.0536636 Jy ! Total flux subtracted in 200 components = 0.0536636 Jy ! Clean residual min=-0.014203 max=0.017632 Jy/beam ! Clean residual mean=0.000010 rms=0.003523 Jy/beam ! Combined flux in latest and established models = 0.807131 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 32 components and 0.807131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108386Jy sigma=1.569536 ! Fit after self-cal, rms=0.108313Jy sigma=1.567777 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.998602 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.05 HN 0.93 KP 0.97 ! LA 1.07 MK 1.01 NL 0.98 OV 0.98 ! PT 1.01 SC 0.94 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.982501 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 1.03 KP 1.01 ! LA 1.04 MK 1.04 NL 1.03 OV 1.05 ! PT 0.94 SC 0.99 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.01058 ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.90 HN 0.99 KP 0.99 ! LA 0.94 MK 1.04 NL 1.09 OV 1.01 ! PT 1.05 SC 1.00 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.01154 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.92 HN 0.96 KP 0.90 ! LA 1.00* MK 1.03 NL 0.99 OV 1.00* ! PT 0.97 SC 1.16 ! ! ! Fit before self-cal, rms=0.108313Jy sigma=1.567777 ! Fit after self-cal, rms=0.083860Jy sigma=1.168863 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083860Jy sigma=1.168863 ! Fit after self-cal, rms=0.083851Jy sigma=1.168741 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.699 mas, bmaj=8.654 mas, bpa=-3.865 degrees ! Estimated noise=1.4003 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00205067 Jy ! Component: 100 - total flux cleaned = -0.00206358 Jy ! Component: 150 - total flux cleaned = -0.00187986 Jy ! Component: 200 - total flux cleaned = -0.00171666 Jy ! Total flux subtracted in 200 components = -0.00171666 Jy ! Clean residual min=-0.005791 max=0.007649 Jy/beam ! Clean residual mean=-0.000016 rms=0.001837 Jy/beam ! Combined flux in latest and established models = 0.805415 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 46 components and 0.805414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083736Jy sigma=1.163416 ! Fit after self-cal, rms=0.083712Jy sigma=1.162855 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083712Jy sigma=1.162855 ! Fit after self-cal, rms=0.080540Jy sigma=1.125177 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000243827 Jy ! Component: 100 - total flux cleaned = 0.000240425 Jy ! Component: 150 - total flux cleaned = 0.000309839 Jy ! Component: 200 - total flux cleaned = 0.000306774 Jy ! Total flux subtracted in 200 components = 0.000306774 Jy ! Clean residual min=-0.005696 max=0.007481 Jy/beam ! Clean residual mean=-0.000017 rms=0.001808 Jy/beam ! Combined flux in latest and established models = 0.805721 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 51 components and 0.805721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080434Jy sigma=1.122664 ! Fit after self-cal, rms=0.080057Jy sigma=1.118431 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.699 x 8.654 at -3.865 degrees (North through East) ! Clean map min=-0.0056601 max=0.7677 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080057Jy sigma=1.118431 ! Fit after self-cal, rms=0.076816Jy sigma=1.067908 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076816Jy sigma=1.067908 ! Fit after self-cal, rms=0.076798Jy sigma=1.067436 ! Inverting map and beam ! Estimated beam: bmin=3.697 mas, bmaj=8.659 mas, bpa=-3.936 degrees ! Estimated noise=1.4007 mJy/beam. ! Added new window around map position (-3.5, 14.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00739124 Jy ! Component: 100 - total flux cleaned = 0.00770964 Jy ! Component: 150 - total flux cleaned = 0.00746275 Jy ! Component: 200 - total flux cleaned = 0.00746629 Jy ! Total flux subtracted in 200 components = 0.00746629 Jy ! Clean residual min=-0.004621 max=0.005656 Jy/beam ! Clean residual mean=-0.000018 rms=0.001353 Jy/beam ! Combined flux in latest and established models = 0.813188 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 73 components and 0.813187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076286Jy sigma=1.051755 ! Fit after self-cal, rms=0.076212Jy sigma=1.050177 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076212Jy sigma=1.050177 ! Fit after self-cal, rms=0.068147Jy sigma=0.938677 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068147Jy sigma=0.938677 ! Fit after self-cal, rms=0.068148Jy sigma=0.938658 ! Inverting map and beam ! Estimated beam: bmin=3.699 mas, bmaj=8.638 mas, bpa=-3.932 degrees ! Estimated noise=1.40054 mJy/beam. ! Added new window around map position (-64, -25.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00569097 Jy ! Component: 100 - total flux cleaned = 0.00632394 Jy ! Component: 150 - total flux cleaned = 0.00642927 Jy ! Component: 200 - total flux cleaned = 0.00643077 Jy ! Total flux subtracted in 200 components = 0.00643077 Jy ! Clean residual min=-0.004078 max=0.003703 Jy/beam ! Clean residual mean=-0.000010 rms=0.001123 Jy/beam ! Combined flux in latest and established models = 0.819618 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 92 components and 0.819618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067550Jy sigma=0.927397 ! Fit after self-cal, rms=0.067518Jy sigma=0.926931 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.782 mas, bmaj=13.15 mas, bpa=-10.13 degrees ! Estimated noise=1.71923 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00077451 Jy ! Component: 100 - total flux cleaned = 0.00129028 Jy ! Component: 150 - total flux cleaned = 0.00159415 Jy ! Component: 200 - total flux cleaned = 0.00174958 Jy ! Total flux subtracted in 200 components = 0.00174958 Jy ! Clean residual min=-0.003945 max=0.003161 Jy/beam ! Clean residual mean=-0.000008 rms=0.001200 Jy/beam ! Combined flux in latest and established models = 0.821368 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 109 components and 0.821368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067471Jy sigma=0.926191 ! Fit after self-cal, rms=0.067456Jy sigma=0.926042 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.002 mas, bmaj=6.93 mas, bpa=-2.868 degrees ! Estimated noise=1.87466 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.65929 Jy ! Component: 100 - total flux cleaned = 0.752436 Jy ! Component: 150 - total flux cleaned = 0.783615 Jy ! Component: 200 - total flux cleaned = 0.799154 Jy ! Total flux subtracted in 200 components = 0.799154 Jy ! Clean residual min=-0.007715 max=0.006690 Jy/beam ! Clean residual mean=0.000022 rms=0.002010 Jy/beam ! Combined flux in latest and established models = 0.799154 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.799154 Jy ! Inverting map and beam ! Estimated beam: bmin=3.699 mas, bmaj=8.638 mas, bpa=-3.932 degrees ! Estimated noise=1.40054 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.011133 Jy ! Component: 100 - total flux cleaned = 0.0175224 Jy ! Component: 150 - total flux cleaned = 0.0200851 Jy ! Component: 200 - total flux cleaned = 0.0208127 Jy ! Total flux subtracted in 200 components = 0.0208127 Jy ! Clean residual min=-0.004147 max=0.003826 Jy/beam ! Clean residual mean=-0.000004 rms=0.001173 Jy/beam ! Combined flux in latest and established models = 0.819967 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 60 components and 0.819966 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.782 mas, bmaj=13.15 mas, bpa=-10.13 degrees ! Estimated noise=1.71923 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010421 Jy ! Component: 100 - total flux cleaned = 0.00157205 Jy ! Component: 150 - total flux cleaned = 0.00164873 Jy ! Component: 200 - total flux cleaned = 0.00165276 Jy ! Total flux subtracted in 200 components = 0.00165276 Jy ! Clean residual min=-0.003972 max=0.003389 Jy/beam ! Clean residual mean=-0.000009 rms=0.001207 Jy/beam ! Combined flux in latest and established models = 0.821619 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 83 components and 0.821619 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.699 mas, bmaj=8.638 mas, bpa=-3.932 degrees ! Estimated noise=1.40054 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000951312 Jy ! Component: 100 - total flux cleaned = -0.00117585 Jy ! Component: 150 - total flux cleaned = -0.00137313 Jy ! Component: 200 - total flux cleaned = -0.00128558 Jy ! Total flux subtracted in 200 components = -0.00128558 Jy ! Clean residual min=-0.003866 max=0.003722 Jy/beam ! Clean residual mean=-0.000006 rms=0.001055 Jy/beam ! Combined flux in latest and established models = 0.820334 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 102 components and 0.820334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067394Jy sigma=0.926098 ! Fit after self-cal, rms=0.067395Jy sigma=0.925816 wmodel J1354-0206_S_2004_05_08_yyk\_map.mod ! Writing 102 model components to file: J1354-0206_S_2004_05_08_yyk_map.mod wobs J1354-0206_S_2004_05_08_yyk\_uvs.fits ! Writing UV FITS file: J1354-0206_S_2004_05_08_yyk_uvs.fits wwins J1354-0206_S_2004_05_08_yyk\_map.win ! wwins: Wrote 3 windows to J1354-0206_S_2004_05_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00121811 Jy ! Component: 100 - total flux cleaned = -0.00148119 Jy ! Component: 150 - total flux cleaned = -0.00148164 Jy ! Component: 200 - total flux cleaned = -0.00176692 Jy ! Component: 250 - total flux cleaned = -0.00192796 Jy ! Component: 300 - total flux cleaned = -0.00187675 Jy ! Component: 350 - total flux cleaned = -0.00192886 Jy ! Component: 400 - total flux cleaned = -0.00202609 Jy ! Component: 450 - total flux cleaned = -0.00202591 Jy ! Component: 500 - total flux cleaned = -0.00211438 Jy ! Component: 550 - total flux cleaned = -0.00215572 Jy ! Component: 600 - total flux cleaned = -0.00236425 Jy ! Component: 650 - total flux cleaned = -0.0024848 Jy ! Component: 700 - total flux cleaned = -0.00260174 Jy ! Component: 750 - total flux cleaned = -0.00271595 Jy ! Component: 800 - total flux cleaned = -0.00297525 Jy ! Component: 850 - total flux cleaned = -0.00308298 Jy ! Component: 900 - total flux cleaned = -0.00329283 Jy ! Component: 950 - total flux cleaned = -0.00336185 Jy ! Component: 1000 - total flux cleaned = -0.0033951 Jy ! Component: 1050 - total flux cleaned = -0.00342724 Jy ! Component: 1100 - total flux cleaned = -0.00345831 Jy ! Component: 1150 - total flux cleaned = -0.00345866 Jy ! Component: 1200 - total flux cleaned = -0.0034284 Jy ! Component: 1250 - total flux cleaned = -0.00333875 Jy ! Component: 1300 - total flux cleaned = -0.00319376 Jy ! Component: 1350 - total flux cleaned = -0.0031084 Jy ! Component: 1400 - total flux cleaned = -0.00291136 Jy ! Component: 1450 - total flux cleaned = -0.00280065 Jy ! Component: 1500 - total flux cleaned = -0.00250215 Jy ! Component: 1550 - total flux cleaned = -0.00244934 Jy ! Component: 1600 - total flux cleaned = -0.00226564 Jy ! Component: 1650 - total flux cleaned = -0.00208448 Jy ! Component: 1700 - total flux cleaned = -0.00208504 Jy ! Component: 1750 - total flux cleaned = -0.00203446 Jy ! Component: 1800 - total flux cleaned = -0.00193582 Jy ! Component: 1850 - total flux cleaned = -0.00198471 Jy ! Component: 1900 - total flux cleaned = -0.00193649 Jy ! Component: 1950 - total flux cleaned = -0.00205565 Jy ! Component: 2000 - total flux cleaned = -0.00196141 Jy ! Total flux subtracted in 2048 components = -0.00193818 Jy ! Clean residual min=-0.001649 max=0.002020 Jy/beam ! Clean residual mean=0.000008 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.818395 Jy keep ! Adding 123 model components to the UV plane model. ! The established model now contains 225 components and 0.818395 Jy ![Exited script file: muppet] wmap "J1354-0206_S_2004_05_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.699 x 8.638 at -3.932 degrees (North through East) ! Clean map min=-0.0030356 max=0.76819 Jy/beam ! Writing clean map to FITS file: J1354-0206_S_2004_05_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.768194 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000451414 device "J1354-0206_S_2004_05_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J1354-0206_S_2004_05_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.176289 0.176289 0.352578 0.705156 1.41031 2.82062 5.64125 11.2825 22.565 45.13 90.2599 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.768 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.699 x 8.638 at -3.932 degrees (North through East) ! Clean map min=-0.0030356 max=0.76819 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1354-0206_S_2004_05_08_yyk\_map.gif/gif" ! Attempting to open device: 'J1354-0206_S_2004_05_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1354-0206_S_2004_05_08_yyk_uvs.log closed on Wed Dec 7 00:28:55 2005