! Started logfile: J1351-2912_S_2004_04_30_yyk_uvs.log on Wed Dec 7 01:03:58 2005 obs J1351-2912_S_2004_04_30_yyk_uve.fits ! Reading UV FITS file: J1351-2912_S_2004_04_30_yyk_uve.fits ! AN table 1: 22 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.734343 visibilities/baseline/integration-bin. ! Found source: J1351-2912 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1633 lines of history. ! ! Reading 2908 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1351-2912_S_2004_04_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.129201 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.898023Jy sigma=15.773789 ! Fit after self-cal, rms=0.897484Jy sigma=15.768154 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.807 mas, bmaj=16.35 mas, bpa=-22.44 degrees ! Estimated noise=1.44796 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0852177 Jy ! Component: 100 - total flux cleaned = 0.10635 Jy ! Total flux subtracted in 100 components = 0.10635 Jy ! Clean residual min=-0.005919 max=0.008407 Jy/beam ! Clean residual mean=-0.000071 rms=0.002181 Jy/beam ! Combined flux in latest and established models = 0.10635 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.10635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072440Jy sigma=1.137930 ! Fit after self-cal, rms=0.072369Jy sigma=1.135850 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.934 mas, bmaj=18.07 mas, bpa=-21.1 degrees ! Estimated noise=0.876012 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0178175 Jy ! Component: 100 - total flux cleaned = 0.0264024 Jy ! Component: 150 - total flux cleaned = 0.0312898 Jy ! Component: 200 - total flux cleaned = 0.0342772 Jy ! Total flux subtracted in 200 components = 0.0342772 Jy ! Clean residual min=-0.003802 max=0.006083 Jy/beam ! Clean residual mean=0.000072 rms=0.001456 Jy/beam ! Combined flux in latest and established models = 0.140628 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 58 model components to the UV plane model. ! The established model now contains 77 components and 0.140628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069514Jy sigma=1.074777 ! Fit after self-cal, rms=0.069475Jy sigma=1.073473 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01366 ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.03 HN 1.00* KP 0.97 ! LA 1.05 MK 0.96 NL 0.95 OV 1.00 ! PT 1.03 SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.06373 ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.99 HN 1.00* KP 0.86 ! LA 1.00* MK 0.92 NL 0.99 OV 0.92 ! PT 0.86 SC 1.00* ! ! ! Fit before self-cal, rms=0.069475Jy sigma=1.073473 ! Fit after self-cal, rms=0.067703Jy sigma=1.064619 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067703Jy sigma=1.064619 ! Fit after self-cal, rms=0.067704Jy sigma=1.064114 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.913 mas, bmaj=17.82 mas, bpa=-21.2 degrees ! Estimated noise=0.869128 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00283194 Jy ! Component: 100 - total flux cleaned = 0.00381346 Jy ! Component: 150 - total flux cleaned = 0.00437774 Jy ! Component: 200 - total flux cleaned = 0.00481249 Jy ! Total flux subtracted in 200 components = 0.00481249 Jy ! Clean residual min=-0.003569 max=0.005942 Jy/beam ! Clean residual mean=0.000128 rms=0.001333 Jy/beam ! Combined flux in latest and established models = 0.14544 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 93 components and 0.14544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067609Jy sigma=1.061781 ! Fit after self-cal, rms=0.067616Jy sigma=1.061250 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067616Jy sigma=1.061250 ! Fit after self-cal, rms=0.063053Jy sigma=0.993215 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00221377 Jy ! Component: 100 - total flux cleaned = 0.00270763 Jy ! Component: 150 - total flux cleaned = 0.00290714 Jy ! Component: 200 - total flux cleaned = 0.00305109 Jy ! Total flux subtracted in 200 components = 0.00305109 Jy ! Clean residual min=-0.003476 max=0.005836 Jy/beam ! Clean residual mean=0.000125 rms=0.001297 Jy/beam ! Combined flux in latest and established models = 0.148491 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 114 components and 0.148491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062977Jy sigma=0.991840 ! Fit after self-cal, rms=0.062648Jy sigma=0.988369 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.913 x 17.82 at -21.2 degrees (North through East) ! Clean map min=-0.0034458 max=0.10272 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062648Jy sigma=0.988369 ! Fit after self-cal, rms=0.060712Jy sigma=0.977018 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060712Jy sigma=0.977018 ! Fit after self-cal, rms=0.060690Jy sigma=0.976591 ! Inverting map and beam ! Estimated beam: bmin=3.859 mas, bmaj=17.78 mas, bpa=-21.28 degrees ! Estimated noise=0.847529 mJy/beam. ! Added new window around map position (-12.5, 17). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00659877 Jy ! Component: 100 - total flux cleaned = 0.0100361 Jy ! Component: 150 - total flux cleaned = 0.0109057 Jy ! Component: 200 - total flux cleaned = 0.0113589 Jy ! Total flux subtracted in 200 components = 0.0113589 Jy ! Clean residual min=-0.002632 max=0.002840 Jy/beam ! Clean residual mean=0.000119 rms=0.000840 Jy/beam ! Combined flux in latest and established models = 0.15985 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 40 model components to the UV plane model. ! The established model now contains 152 components and 0.15985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060237Jy sigma=0.965244 ! Fit after self-cal, rms=0.060221Jy sigma=0.964651 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060221Jy sigma=0.964651 ! Fit after self-cal, rms=0.060778Jy sigma=0.966871 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060778Jy sigma=0.966871 ! Fit after self-cal, rms=0.060804Jy sigma=0.966624 ! Inverting map and beam ! Estimated beam: bmin=3.873 mas, bmaj=17.95 mas, bpa=-21.2 degrees ! Estimated noise=0.839339 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00191845 Jy ! Component: 100 - total flux cleaned = -0.00230663 Jy ! Component: 150 - total flux cleaned = -0.00237498 Jy ! Component: 200 - total flux cleaned = -0.00237935 Jy ! Total flux subtracted in 200 components = -0.00237935 Jy ! Clean residual min=-0.002478 max=0.003061 Jy/beam ! Clean residual mean=0.000130 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 0.157471 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 178 components and 0.157471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060737Jy sigma=0.964048 ! Fit after self-cal, rms=0.060744Jy sigma=0.963985 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.612 mas, bmaj=25 mas, bpa=-0.5583 degrees ! Estimated noise=0.966603 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -2.49337e-05 Jy ! Component: 100 - total flux cleaned = 9.51561e-05 Jy ! Component: 150 - total flux cleaned = 0.00019985 Jy ! Component: 200 - total flux cleaned = 0.000261884 Jy ! Total flux subtracted in 200 components = 0.000261884 Jy ! Clean residual min=-0.002708 max=0.003362 Jy/beam ! Clean residual mean=0.000192 rms=0.000950 Jy/beam ! Combined flux in latest and established models = 0.157733 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 198 components and 0.157733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060717Jy sigma=0.963493 ! Fit after self-cal, rms=0.060715Jy sigma=0.963467 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.81 mas, bmaj=16.31 mas, bpa=-22.48 degrees ! Estimated noise=1.37355 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0831865 Jy ! Component: 100 - total flux cleaned = 0.104484 Jy ! Component: 150 - total flux cleaned = 0.116476 Jy ! Component: 200 - total flux cleaned = 0.124288 Jy ! Total flux subtracted in 200 components = 0.124288 Jy ! Clean residual min=-0.004083 max=0.004036 Jy/beam ! Clean residual mean=0.000031 rms=0.001403 Jy/beam ! Combined flux in latest and established models = 0.124288 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.124288 Jy ! Inverting map and beam ! Estimated beam: bmin=3.873 mas, bmaj=17.95 mas, bpa=-21.2 degrees ! Estimated noise=0.839339 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101214 Jy ! Component: 100 - total flux cleaned = 0.0162142 Jy ! Component: 150 - total flux cleaned = 0.020508 Jy ! Component: 200 - total flux cleaned = 0.0237841 Jy ! Total flux subtracted in 200 components = 0.0237841 Jy ! Clean residual min=-0.002937 max=0.002905 Jy/beam ! Clean residual mean=0.000132 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 0.148072 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 112 components and 0.148072 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.612 mas, bmaj=25 mas, bpa=-0.5583 degrees ! Estimated noise=0.966603 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0025947 Jy ! Component: 100 - total flux cleaned = 0.00421935 Jy ! Component: 150 - total flux cleaned = 0.00558342 Jy ! Component: 200 - total flux cleaned = 0.00661254 Jy ! Total flux subtracted in 200 components = 0.00661254 Jy ! Clean residual min=-0.002886 max=0.003365 Jy/beam ! Clean residual mean=0.000198 rms=0.000979 Jy/beam ! Combined flux in latest and established models = 0.154684 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 150 components and 0.154684 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.873 mas, bmaj=17.95 mas, bpa=-21.2 degrees ! Estimated noise=0.839339 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000144391 Jy ! Component: 100 - total flux cleaned = 0.000554911 Jy ! Component: 150 - total flux cleaned = 0.000858728 Jy ! Component: 200 - total flux cleaned = 0.00108287 Jy ! Total flux subtracted in 200 components = 0.00108287 Jy ! Clean residual min=-0.002559 max=0.002928 Jy/beam ! Clean residual mean=0.000128 rms=0.000810 Jy/beam ! Combined flux in latest and established models = 0.155767 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 173 components and 0.155767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060657Jy sigma=0.962839 ! Fit after self-cal, rms=0.060643Jy sigma=0.962651 wmodel J1351-2912_S_2004_04_30_yyk\_map.mod ! Writing 173 model components to file: J1351-2912_S_2004_04_30_yyk_map.mod wobs J1351-2912_S_2004_04_30_yyk\_uvs.fits ! Writing UV FITS file: J1351-2912_S_2004_04_30_yyk_uvs.fits wwins J1351-2912_S_2004_04_30_yyk\_map.win ! wwins: Wrote 2 windows to J1351-2912_S_2004_04_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000593881 Jy ! Component: 100 - total flux cleaned = 0.00102155 Jy ! Component: 150 - total flux cleaned = 0.00154063 Jy ! Component: 200 - total flux cleaned = 0.001879 Jy ! Component: 250 - total flux cleaned = 0.0021294 Jy ! Component: 300 - total flux cleaned = 0.00250684 Jy ! Component: 350 - total flux cleaned = 0.00293565 Jy ! Component: 400 - total flux cleaned = 0.00341279 Jy ! Component: 450 - total flux cleaned = 0.00365915 Jy ! Component: 500 - total flux cleaned = 0.00404945 Jy ! Component: 550 - total flux cleaned = 0.00431188 Jy ! Component: 600 - total flux cleaned = 0.0044539 Jy ! Component: 650 - total flux cleaned = 0.00459319 Jy ! Component: 700 - total flux cleaned = 0.00472912 Jy ! Component: 750 - total flux cleaned = 0.0048876 Jy ! Component: 800 - total flux cleaned = 0.00501667 Jy ! Component: 850 - total flux cleaned = 0.00506721 Jy ! Component: 900 - total flux cleaned = 0.00511597 Jy ! Component: 950 - total flux cleaned = 0.00506803 Jy ! Component: 1000 - total flux cleaned = 0.00513895 Jy ! Component: 1050 - total flux cleaned = 0.00513807 Jy ! Component: 1100 - total flux cleaned = 0.00511449 Jy ! Component: 1150 - total flux cleaned = 0.00507007 Jy ! Component: 1200 - total flux cleaned = 0.00511451 Jy ! Component: 1250 - total flux cleaned = 0.00524332 Jy ! Component: 1300 - total flux cleaned = 0.00532729 Jy ! Component: 1350 - total flux cleaned = 0.0053893 Jy ! Component: 1400 - total flux cleaned = 0.0054096 Jy ! Component: 1450 - total flux cleaned = 0.00548944 Jy ! Component: 1500 - total flux cleaned = 0.00558784 Jy ! Component: 1550 - total flux cleaned = 0.00564578 Jy ! Component: 1600 - total flux cleaned = 0.00572187 Jy ! Component: 1650 - total flux cleaned = 0.00583483 Jy ! Component: 1700 - total flux cleaned = 0.00587232 Jy ! Component: 1750 - total flux cleaned = 0.00600071 Jy ! Component: 1800 - total flux cleaned = 0.00609104 Jy ! Component: 1850 - total flux cleaned = 0.00616243 Jy ! Component: 1900 - total flux cleaned = 0.00619775 Jy ! Component: 1950 - total flux cleaned = 0.0061808 Jy ! Component: 2000 - total flux cleaned = 0.0063004 Jy ! Total flux subtracted in 2048 components = 0.00630036 Jy ! Clean residual min=-0.001016 max=0.000997 Jy/beam ! Clean residual mean=0.000076 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.162068 Jy keep ! Adding 137 model components to the UV plane model. ! The established model now contains 310 components and 0.162068 Jy ![Exited script file: muppet] wmap "J1351-2912_S_2004_04_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.873 x 17.95 at -21.2 degrees (North through East) ! Clean map min=-0.0017783 max=0.10045 Jy/beam ! Writing clean map to FITS file: J1351-2912_S_2004_04_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.10045 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000374729 device "J1351-2912_S_2004_04_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J1351-2912_S_2004_04_30_yyk_map.eps/VPS' loglevs 2*100*3*image_rms/peak_flux ! The new contour levels are: ! -2.23831 2.23831 4.47662 8.95325 17.9065 35.813 71.626 print "clev=",int(2*3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.1 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.873 x 17.95 at -21.2 degrees (North through East) ! Clean map min=-0.0017783 max=0.10045 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1351-2912_S_2004_04_30_yyk\_map.gif/gif" ! Attempting to open device: 'J1351-2912_S_2004_04_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1351-2912_S_2004_04_30_yyk_uvs.log closed on Wed Dec 7 01:04:02 2005