! Started logfile: J1323-3407_S_2004_05_08_yyk_uvs.log on Wed Dec 7 01:03:55 2005 obs J1323-3407_S_2004_05_08_yyk_uve.fits ! Reading UV FITS file: J1323-3407_S_2004_05_08_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.544444 visibilities/baseline/integration-bin. ! Found source: J1323-3407 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1437 lines of history. ! ! Reading 392 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1323-3407_S_2004_05_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 256x256 pixels with 1.00x1.00 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.226658 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.811287Jy sigma=11.291469 ! Fit after self-cal, rms=0.809528Jy sigma=11.277562 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.029 mas, bmaj=24.69 mas, bpa=22.2 degrees ! Estimated noise=4.70019 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.172094 Jy ! Component: 100 - total flux cleaned = 0.217306 Jy ! Total flux subtracted in 100 components = 0.217306 Jy ! Clean residual min=-0.020973 max=0.021064 Jy/beam ! Clean residual mean=-0.000220 rms=0.005952 Jy/beam ! Combined flux in latest and established models = 0.217306 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.217306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096916Jy sigma=1.158329 ! Fit after self-cal, rms=0.096096Jy sigma=1.153272 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.28 mas, bmaj=31.64 mas, bpa=14.7 degrees ! Estimated noise=2.77351 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0269157 Jy ! Component: 100 - total flux cleaned = 0.0411447 Jy ! Component: 150 - total flux cleaned = 0.0496412 Jy ! Component: 200 - total flux cleaned = 0.0551628 Jy ! Total flux subtracted in 200 components = 0.0551628 Jy ! Clean residual min=-0.009457 max=0.008068 Jy/beam ! Clean residual mean=0.000084 rms=0.003071 Jy/beam ! Combined flux in latest and established models = 0.272469 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 61 components and 0.272469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090345Jy sigma=1.056223 ! Fit after self-cal, rms=0.090215Jy sigma=1.055664 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.97426 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 1.00* KP 0.94 ! LA 1.07 MK 1.00* NL 1.07 OV 1.05 ! PT 1.07 SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.090215Jy sigma=1.055664 ! Fit after self-cal, rms=0.090503Jy sigma=1.050900 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090503Jy sigma=1.050900 ! Fit after self-cal, rms=0.090504Jy sigma=1.050894 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.29 mas, bmaj=31.65 mas, bpa=14.77 degrees ! Estimated noise=2.78057 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00344563 Jy ! Component: 100 - total flux cleaned = 0.00447069 Jy ! Component: 150 - total flux cleaned = 0.00542376 Jy ! Component: 200 - total flux cleaned = 0.00607802 Jy ! Total flux subtracted in 200 components = 0.00607802 Jy ! Clean residual min=-0.008106 max=0.006080 Jy/beam ! Clean residual mean=0.000175 rms=0.002655 Jy/beam ! Combined flux in latest and established models = 0.278547 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 67 components and 0.278547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090115Jy sigma=1.047696 ! Fit after self-cal, rms=0.090101Jy sigma=1.047516 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090101Jy sigma=1.047516 ! Fit after self-cal, rms=0.085383Jy sigma=0.973652 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00202365 Jy ! Component: 100 - total flux cleaned = 0.00225891 Jy ! Component: 150 - total flux cleaned = 0.00254728 Jy ! Component: 200 - total flux cleaned = 0.00281641 Jy ! Total flux subtracted in 200 components = 0.00281641 Jy ! Clean residual min=-0.008009 max=0.005727 Jy/beam ! Clean residual mean=0.000174 rms=0.002536 Jy/beam ! Combined flux in latest and established models = 0.281363 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 77 components and 0.281363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085207Jy sigma=0.971717 ! Fit after self-cal, rms=0.084964Jy sigma=0.967871 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 7.29 x 31.65 at 14.77 degrees (North through East) ! Clean map min=-0.0076293 max=0.20332 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084964Jy sigma=0.967871 ! Fit after self-cal, rms=0.085653Jy sigma=0.963137 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085653Jy sigma=0.963137 ! Fit after self-cal, rms=0.085663Jy sigma=0.962856 ! Inverting map and beam ! Estimated beam: bmin=7.239 mas, bmaj=31.44 mas, bpa=14.86 degrees ! Estimated noise=2.82019 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00406871 Jy ! Component: 100 - total flux cleaned = 0.00534894 Jy ! Component: 150 - total flux cleaned = 0.00559738 Jy ! Component: 200 - total flux cleaned = 0.00588802 Jy ! Total flux subtracted in 200 components = 0.00588802 Jy ! Clean residual min=-0.007707 max=0.005483 Jy/beam ! Clean residual mean=0.000170 rms=0.002558 Jy/beam ! Combined flux in latest and established models = 0.287251 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 78 components and 0.287251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085336Jy sigma=0.960208 ! Fit after self-cal, rms=0.085373Jy sigma=0.960106 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085373Jy sigma=0.960106 ! Fit after self-cal, rms=0.085168Jy sigma=0.955867 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085168Jy sigma=0.955867 ! Fit after self-cal, rms=0.085176Jy sigma=0.955857 ! Inverting map and beam ! Estimated beam: bmin=7.224 mas, bmaj=31.39 mas, bpa=14.89 degrees ! Estimated noise=2.83199 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164952 Jy ! Component: 100 - total flux cleaned = 0.00188154 Jy ! Component: 150 - total flux cleaned = 0.00209578 Jy ! Component: 200 - total flux cleaned = 0.00230277 Jy ! Total flux subtracted in 200 components = 0.00230277 Jy ! Clean residual min=-0.007482 max=0.005525 Jy/beam ! Clean residual mean=0.000159 rms=0.002559 Jy/beam ! Combined flux in latest and established models = 0.289554 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 83 components and 0.289554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085051Jy sigma=0.954860 ! Fit after self-cal, rms=0.085057Jy sigma=0.954804 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.33 mas, bmaj=44.07 mas, bpa=7.815 degrees ! Estimated noise=2.92181 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117485 Jy ! Component: 100 - total flux cleaned = 0.00156909 Jy ! Component: 150 - total flux cleaned = 0.00176397 Jy ! Component: 200 - total flux cleaned = 0.00194941 Jy ! Total flux subtracted in 200 components = 0.00194941 Jy ! Clean residual min=-0.006775 max=0.005348 Jy/beam ! Clean residual mean=0.000174 rms=0.002463 Jy/beam ! Combined flux in latest and established models = 0.291504 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 88 components and 0.291504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085039Jy sigma=0.954324 ! Fit after self-cal, rms=0.085048Jy sigma=0.954285 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.005 mas, bmaj=24.68 mas, bpa=22.26 degrees ! Estimated noise=4.7756 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.177361 Jy ! Component: 100 - total flux cleaned = 0.223465 Jy ! Component: 150 - total flux cleaned = 0.245516 Jy ! Component: 200 - total flux cleaned = 0.259316 Jy ! Total flux subtracted in 200 components = 0.259316 Jy ! Clean residual min=-0.019537 max=0.014204 Jy/beam ! Clean residual mean=-0.000030 rms=0.004640 Jy/beam ! Combined flux in latest and established models = 0.259316 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.259316 Jy ! Inverting map and beam ! Estimated beam: bmin=7.224 mas, bmaj=31.39 mas, bpa=14.89 degrees ! Estimated noise=2.83199 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143559 Jy ! Component: 100 - total flux cleaned = 0.0214653 Jy ! Component: 150 - total flux cleaned = 0.0244683 Jy ! Component: 200 - total flux cleaned = 0.0254414 Jy ! Total flux subtracted in 200 components = 0.0254414 Jy ! Clean residual min=-0.007993 max=0.006675 Jy/beam ! Clean residual mean=0.000194 rms=0.002818 Jy/beam ! Combined flux in latest and established models = 0.284757 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 60 components and 0.284757 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.33 mas, bmaj=44.07 mas, bpa=7.815 degrees ! Estimated noise=2.92181 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209048 Jy ! Component: 100 - total flux cleaned = 0.00272258 Jy ! Component: 150 - total flux cleaned = 0.00337028 Jy ! Component: 200 - total flux cleaned = 0.00386921 Jy ! Total flux subtracted in 200 components = 0.00386921 Jy ! Clean residual min=-0.007388 max=0.005529 Jy/beam ! Clean residual mean=0.000211 rms=0.002628 Jy/beam ! Combined flux in latest and established models = 0.288627 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 70 components and 0.288627 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=7.224 mas, bmaj=31.39 mas, bpa=14.89 degrees ! Estimated noise=2.83199 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000255917 Jy ! Component: 100 - total flux cleaned = -0.000258175 Jy ! Component: 150 - total flux cleaned = -7.4689e-05 Jy ! Component: 200 - total flux cleaned = 4.96188e-06 Jy ! Total flux subtracted in 200 components = 4.96188e-06 Jy ! Clean residual min=-0.007622 max=0.005522 Jy/beam ! Clean residual mean=0.000175 rms=0.002618 Jy/beam ! Combined flux in latest and established models = 0.288632 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 72 components and 0.288632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085191Jy sigma=0.956097 ! Fit after self-cal, rms=0.085193Jy sigma=0.955616 wmodel J1323-3407_S_2004_05_08_yyk\_map.mod ! Writing 72 model components to file: J1323-3407_S_2004_05_08_yyk_map.mod wobs J1323-3407_S_2004_05_08_yyk\_uvs.fits ! Writing UV FITS file: J1323-3407_S_2004_05_08_yyk_uvs.fits wwins J1323-3407_S_2004_05_08_yyk\_map.win ! wwins: Wrote 1 windows to J1323-3407_S_2004_05_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=1024 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00340165 Jy ! Component: 100 - total flux cleaned = -0.0063487 Jy ! Component: 150 - total flux cleaned = -0.00902567 Jy ! Component: 200 - total flux cleaned = -0.0113998 Jy ! Component: 250 - total flux cleaned = -0.0131484 Jy ! Component: 300 - total flux cleaned = -0.0141809 Jy ! Component: 350 - total flux cleaned = -0.0147533 Jy ! Component: 400 - total flux cleaned = -0.0150649 Jy ! Component: 450 - total flux cleaned = -0.0149211 Jy ! Component: 500 - total flux cleaned = -0.0148525 Jy ! Component: 550 - total flux cleaned = -0.0147861 Jy ! Component: 600 - total flux cleaned = -0.0145244 Jy ! Component: 650 - total flux cleaned = -0.0141455 Jy ! Component: 700 - total flux cleaned = -0.0135381 Jy ! Component: 750 - total flux cleaned = -0.0127719 Jy ! Component: 800 - total flux cleaned = -0.0120824 Jy ! Component: 850 - total flux cleaned = -0.0112997 Jy ! Component: 900 - total flux cleaned = -0.0107539 Jy ! Component: 950 - total flux cleaned = -0.0100086 Jy ! Component: 1000 - total flux cleaned = -0.00923035 Jy ! Total flux subtracted in 1024 components = -0.00892507 Jy ! Clean residual min=-0.002578 max=0.003358 Jy/beam ! Clean residual mean=0.000164 rms=0.001193 Jy/beam ! Combined flux in latest and established models = 0.279706 Jy keep ! Adding 55 model components to the UV plane model. ! The established model now contains 127 components and 0.279706 Jy ![Exited script file: muppet] wmap "J1323-3407_S_2004_05_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 7.224 x 31.39 at 14.89 degrees (North through East) ! Clean map min=-0.007317 max=0.20501 Jy/beam ! Writing clean map to FITS file: J1323-3407_S_2004_05_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.205006 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00120952 device "J1323-3407_S_2004_05_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J1323-3407_S_2004_05_08_yyk_map.eps/VPS' loglevs 4*100*3*image_rms/peak_flux ! The new contour levels are: ! -7.07989 7.07989 14.1598 28.3196 56.6391 print "clev=",int(4*3*image_rms*10000)/10000 ! clev= 0.0145 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.205 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 7.224 x 31.39 at 14.89 degrees (North through East) ! Clean map min=-0.007317 max=0.20501 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1323-3407_S_2004_05_08_yyk\_map.gif/gif" ! Attempting to open device: 'J1323-3407_S_2004_05_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1323-3407_S_2004_05_08_yyk_uvs.log closed on Wed Dec 7 01:03:56 2005