! Started logfile: J1317-2031_S_2004_05_08_yyk_uvs.log on Wed Dec 7 00:27:02 2005 obs J1317-2031_S_2004_05_08_yyk_uve.fits ! Reading UV FITS file: J1317-2031_S_2004_05_08_yyk_uve.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.890278 visibilities/baseline/integration-bin. ! Found source: J1317-2031 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1433 lines of history. ! ! Reading 2564 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1317-2031_S_2004_05_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.134438 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.894154Jy sigma=15.544101 ! Fit after self-cal, rms=0.892798Jy sigma=15.526905 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.527 mas, bmaj=6.959 mas, bpa=-3.073 degrees ! Estimated noise=1.48587 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.093139 Jy ! Component: 100 - total flux cleaned = 0.112324 Jy ! Total flux subtracted in 100 components = 0.112324 Jy ! Clean residual min=-0.005612 max=0.006316 Jy/beam ! Clean residual mean=0.000004 rms=0.001513 Jy/beam ! Combined flux in latest and established models = 0.112323 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.112323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075260Jy sigma=1.059067 ! Fit after self-cal, rms=0.075246Jy sigma=1.058928 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.383 mas, bmaj=9.296 mas, bpa=-5.753 degrees ! Estimated noise=0.838645 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00775102 Jy ! Component: 100 - total flux cleaned = 0.0103006 Jy ! Component: 150 - total flux cleaned = 0.010524 Jy ! Component: 200 - total flux cleaned = 0.0104814 Jy ! Total flux subtracted in 200 components = 0.0104814 Jy ! Clean residual min=-0.004005 max=0.003595 Jy/beam ! Clean residual mean=-0.000007 rms=0.001024 Jy/beam ! Combined flux in latest and established models = 0.122805 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 46 components and 0.122805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074703Jy sigma=1.047860 ! Fit after self-cal, rms=0.074720Jy sigma=1.047703 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02309 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.91 KP 0.99 ! LA 1.02 MK 1.00 NL 1.00 OV 1.02 ! PT 1.00 SC 0.85 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01683 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.98 HN 0.97 KP 1.01 ! LA 1.06 MK 0.97 NL 0.95 OV 1.04 ! PT 0.95 SC 0.87 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.074720Jy sigma=1.047703 ! Fit after self-cal, rms=0.074072Jy sigma=1.045619 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074072Jy sigma=1.045619 ! Fit after self-cal, rms=0.074071Jy sigma=1.045613 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.308 mas, bmaj=9.004 mas, bpa=-4.703 degrees ! Estimated noise=0.844362 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279335 Jy ! Component: 100 - total flux cleaned = 0.0034873 Jy ! Component: 150 - total flux cleaned = 0.003602 Jy ! Component: 200 - total flux cleaned = 0.00362504 Jy ! Total flux subtracted in 200 components = 0.00362505 Jy ! Clean residual min=-0.004000 max=0.003532 Jy/beam ! Clean residual mean=0.000006 rms=0.000992 Jy/beam ! Combined flux in latest and established models = 0.12643 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 58 components and 0.12643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073986Jy sigma=1.044093 ! Fit after self-cal, rms=0.073997Jy sigma=1.044016 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073997Jy sigma=1.044016 ! Fit after self-cal, rms=0.071384Jy sigma=0.997082 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152321 Jy ! Component: 100 - total flux cleaned = 0.0016096 Jy ! Component: 150 - total flux cleaned = 0.00160917 Jy ! Component: 200 - total flux cleaned = 0.00157159 Jy ! Total flux subtracted in 200 components = 0.00157159 Jy ! Clean residual min=-0.004074 max=0.003481 Jy/beam ! Clean residual mean=0.000003 rms=0.000973 Jy/beam ! Combined flux in latest and established models = 0.128002 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 63 components and 0.128002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071343Jy sigma=0.996564 ! Fit after self-cal, rms=0.071167Jy sigma=0.993036 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.308 x 9.004 at -4.703 degrees (North through East) ! Clean map min=-0.0039313 max=0.11049 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071167Jy sigma=0.993036 ! Fit after self-cal, rms=0.069940Jy sigma=0.988194 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069940Jy sigma=0.988194 ! Fit after self-cal, rms=0.069966Jy sigma=0.987625 ! Inverting map and beam ! Estimated beam: bmin=3.248 mas, bmaj=8.797 mas, bpa=-4.287 degrees ! Estimated noise=0.830884 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000468633 Jy ! Component: 100 - total flux cleaned = -0.000469604 Jy ! Component: 150 - total flux cleaned = -0.00043953 Jy ! Component: 200 - total flux cleaned = -0.000443614 Jy ! Total flux subtracted in 200 components = -0.000443614 Jy ! Clean residual min=-0.003860 max=0.003481 Jy/beam ! Clean residual mean=0.000016 rms=0.000946 Jy/beam ! Combined flux in latest and established models = 0.127558 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 64 components and 0.127558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069936Jy sigma=0.987023 ! Fit after self-cal, rms=0.069982Jy sigma=0.986895 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069982Jy sigma=0.986895 ! Fit after self-cal, rms=0.070521Jy sigma=0.985617 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070521Jy sigma=0.985617 ! Fit after self-cal, rms=0.070570Jy sigma=0.985459 ! Inverting map and beam ! Estimated beam: bmin=3.221 mas, bmaj=8.692 mas, bpa=-3.949 degrees ! Estimated noise=0.825513 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -8.4112e-05 Jy ! Component: 100 - total flux cleaned = -1.86667e-05 Jy ! Component: 150 - total flux cleaned = -2.21275e-05 Jy ! Component: 200 - total flux cleaned = 4.85367e-06 Jy ! Total flux subtracted in 200 components = 4.85367e-06 Jy ! Clean residual min=-0.003520 max=0.003260 Jy/beam ! Clean residual mean=0.000026 rms=0.000937 Jy/beam ! Combined flux in latest and established models = 0.127563 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 64 components and 0.127563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070549Jy sigma=0.985024 ! Fit after self-cal, rms=0.070580Jy sigma=0.984985 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.742 mas, bmaj=17.56 mas, bpa=3.934 degrees ! Estimated noise=1.0373 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105702 Jy ! Component: 100 - total flux cleaned = 0.00104922 Jy ! Component: 150 - total flux cleaned = 0.00111501 Jy ! Component: 200 - total flux cleaned = 0.00117781 Jy ! Total flux subtracted in 200 components = 0.00117781 Jy ! Clean residual min=-0.004028 max=0.003179 Jy/beam ! Clean residual mean=0.000051 rms=0.001197 Jy/beam ! Combined flux in latest and established models = 0.128741 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 69 components and 0.128741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070626Jy sigma=0.985388 ! Fit after self-cal, rms=0.070607Jy sigma=0.984960 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.474 mas, bmaj=6.815 mas, bpa=-2.271 degrees ! Estimated noise=1.42943 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0921003 Jy ! Component: 100 - total flux cleaned = 0.113391 Jy ! Component: 150 - total flux cleaned = 0.121946 Jy ! Component: 200 - total flux cleaned = 0.126065 Jy ! Total flux subtracted in 200 components = 0.126065 Jy ! Clean residual min=-0.004887 max=0.005021 Jy/beam ! Clean residual mean=0.000017 rms=0.001382 Jy/beam ! Combined flux in latest and established models = 0.126065 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.126065 Jy ! Inverting map and beam ! Estimated beam: bmin=3.221 mas, bmaj=8.692 mas, bpa=-3.949 degrees ! Estimated noise=0.825513 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146085 Jy ! Component: 100 - total flux cleaned = 0.00162256 Jy ! Component: 150 - total flux cleaned = 0.00162539 Jy ! Component: 200 - total flux cleaned = 0.00162527 Jy ! Total flux subtracted in 200 components = 0.00162527 Jy ! Clean residual min=-0.003555 max=0.003354 Jy/beam ! Clean residual mean=0.000025 rms=0.000950 Jy/beam ! Combined flux in latest and established models = 0.12769 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.12769 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.742 mas, bmaj=17.56 mas, bpa=3.934 degrees ! Estimated noise=1.0373 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000606812 Jy ! Component: 100 - total flux cleaned = 0.000752133 Jy ! Component: 150 - total flux cleaned = 0.000881201 Jy ! Component: 200 - total flux cleaned = 0.000997409 Jy ! Total flux subtracted in 200 components = 0.000997409 Jy ! Clean residual min=-0.004001 max=0.003233 Jy/beam ! Clean residual mean=0.000050 rms=0.001204 Jy/beam ! Combined flux in latest and established models = 0.128687 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 41 components and 0.128687 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.221 mas, bmaj=8.692 mas, bpa=-3.949 degrees ! Estimated noise=0.825513 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000720255 Jy ! Component: 100 - total flux cleaned = -0.000765449 Jy ! Component: 150 - total flux cleaned = -0.000802701 Jy ! Component: 200 - total flux cleaned = -0.000834534 Jy ! Total flux subtracted in 200 components = -0.000834534 Jy ! Clean residual min=-0.003523 max=0.003262 Jy/beam ! Clean residual mean=0.000025 rms=0.000934 Jy/beam ! Combined flux in latest and established models = 0.127853 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 51 components and 0.127853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070534Jy sigma=0.984864 ! Fit after self-cal, rms=0.070575Jy sigma=0.984660 wmodel J1317-2031_S_2004_05_08_yyk\_map.mod ! Writing 51 model components to file: J1317-2031_S_2004_05_08_yyk_map.mod wobs J1317-2031_S_2004_05_08_yyk\_uvs.fits ! Writing UV FITS file: J1317-2031_S_2004_05_08_yyk_uvs.fits wwins J1317-2031_S_2004_05_08_yyk\_map.win ! wwins: Wrote 1 windows to J1317-2031_S_2004_05_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000395145 Jy ! Component: 100 - total flux cleaned = -0.000182799 Jy ! Component: 150 - total flux cleaned = -0.000182403 Jy ! Component: 200 - total flux cleaned = 5.33903e-05 Jy ! Component: 250 - total flux cleaned = 0.000234126 Jy ! Component: 300 - total flux cleaned = 0.000407154 Jy ! Component: 350 - total flux cleaned = 0.000532336 Jy ! Component: 400 - total flux cleaned = 0.000814961 Jy ! Component: 450 - total flux cleaned = 0.00116901 Jy ! Component: 500 - total flux cleaned = 0.00139814 Jy ! Component: 550 - total flux cleaned = 0.00147223 Jy ! Component: 600 - total flux cleaned = 0.00165473 Jy ! Component: 650 - total flux cleaned = 0.00187011 Jy ! Component: 700 - total flux cleaned = 0.00215103 Jy ! Component: 750 - total flux cleaned = 0.0024255 Jy ! Component: 800 - total flux cleaned = 0.00266058 Jy ! Component: 850 - total flux cleaned = 0.00289119 Jy ! Component: 900 - total flux cleaned = 0.00311696 Jy ! Component: 950 - total flux cleaned = 0.00327555 Jy ! Component: 1000 - total flux cleaned = 0.00343138 Jy ! Component: 1050 - total flux cleaned = 0.00361526 Jy ! Component: 1100 - total flux cleaned = 0.00364581 Jy ! Component: 1150 - total flux cleaned = 0.0037944 Jy ! Component: 1200 - total flux cleaned = 0.00382411 Jy ! Component: 1250 - total flux cleaned = 0.00393914 Jy ! Component: 1300 - total flux cleaned = 0.00402343 Jy ! Component: 1350 - total flux cleaned = 0.00405118 Jy ! Component: 1400 - total flux cleaned = 0.00410639 Jy ! Component: 1450 - total flux cleaned = 0.00424195 Jy ! Component: 1500 - total flux cleaned = 0.0041613 Jy ! Component: 1550 - total flux cleaned = 0.00426754 Jy ! Component: 1600 - total flux cleaned = 0.00431933 Jy ! Component: 1650 - total flux cleaned = 0.00429334 Jy ! Component: 1700 - total flux cleaned = 0.00444596 Jy ! Component: 1750 - total flux cleaned = 0.0043198 Jy ! Component: 1800 - total flux cleaned = 0.00439486 Jy ! Component: 1850 - total flux cleaned = 0.00442002 Jy ! Component: 1900 - total flux cleaned = 0.00444433 Jy ! Component: 1950 - total flux cleaned = 0.00444426 Jy ! Component: 2000 - total flux cleaned = 0.00449194 Jy ! Total flux subtracted in 2048 components = 0.00451567 Jy ! Clean residual min=-0.001525 max=0.001626 Jy/beam ! Clean residual mean=0.000010 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.132368 Jy keep ! Adding 150 model components to the UV plane model. ! The established model now contains 201 components and 0.132368 Jy ![Exited script file: muppet] wmap "J1317-2031_S_2004_05_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.221 x 8.692 at -3.949 degrees (North through East) ! Clean map min=-0.0023548 max=0.10724 Jy/beam ! Writing clean map to FITS file: J1317-2031_S_2004_05_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.10724 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000500095 device "J1317-2031_S_2004_05_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J1317-2031_S_2004_05_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.399 1.399 2.79799 5.59599 11.192 22.384 44.7679 89.5358 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.107 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.221 x 8.692 at -3.949 degrees (North through East) ! Clean map min=-0.0023548 max=0.10724 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1317-2031_S_2004_05_08_yyk\_map.gif/gif" ! Attempting to open device: 'J1317-2031_S_2004_05_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1317-2031_S_2004_05_08_yyk_uvs.log closed on Wed Dec 7 00:27:07 2005