! Started logfile: J1316-3338_S_2004_05_27_yyk_uvs.log on Wed Dec 7 00:26:44 2005 obs J1316-3338_S_2004_05_27_yyk_uve.fits ! Reading UV FITS file: J1316-3338_S_2004_05_27_yyk_uve.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.877778 visibilities/baseline/integration-bin. ! Found source: J1316-3338 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1388 lines of history. ! ! Reading 1264 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1316-3338_S_2004_05_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.620721 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.456357Jy sigma=5.971949 ! Fit after self-cal, rms=0.456137Jy sigma=5.966726 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.419 mas, bmaj=6.325 mas, bpa=2.348 degrees ! Estimated noise=2.44546 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.469141 Jy ! Component: 100 - total flux cleaned = 0.575889 Jy ! Total flux subtracted in 100 components = 0.575889 Jy ! Clean residual min=-0.041464 max=0.052892 Jy/beam ! Clean residual mean=-0.000941 rms=0.010511 Jy/beam ! Combined flux in latest and established models = 0.575889 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.575889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181022Jy sigma=2.403410 ! Fit after self-cal, rms=0.180932Jy sigma=2.401704 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.088 mas, bmaj=8.195 mas, bpa=0.1153 degrees ! Estimated noise=1.65975 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.104548 Jy ! Component: 100 - total flux cleaned = 0.142094 Jy ! Component: 150 - total flux cleaned = 0.156285 Jy ! Component: 200 - total flux cleaned = 0.157827 Jy ! Total flux subtracted in 200 components = 0.157827 Jy ! Clean residual min=-0.031267 max=0.047974 Jy/beam ! Clean residual mean=-0.000341 rms=0.009243 Jy/beam ! Combined flux in latest and established models = 0.733715 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 42 components and 0.733716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149136Jy sigma=1.778497 ! Fit after self-cal, rms=0.148869Jy sigma=1.777141 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.148869Jy sigma=1.777141 ! Fit after self-cal, rms=0.148869Jy sigma=1.777141 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148869Jy sigma=1.777141 ! Fit after self-cal, rms=0.148870Jy sigma=1.777141 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.088 mas, bmaj=8.195 mas, bpa=0.1153 degrees ! Estimated noise=1.65975 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7, 8.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0545806 Jy ! Component: 100 - total flux cleaned = 0.0622036 Jy ! Component: 150 - total flux cleaned = 0.0646739 Jy ! Component: 200 - total flux cleaned = 0.0668481 Jy ! Total flux subtracted in 200 components = 0.0668481 Jy ! Clean residual min=-0.024010 max=0.036017 Jy/beam ! Clean residual mean=-0.000415 rms=0.006487 Jy/beam ! Combined flux in latest and established models = 0.800564 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 74 components and 0.800564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132025Jy sigma=1.537319 ! Fit after self-cal, rms=0.129731Jy sigma=1.501188 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129731Jy sigma=1.501188 ! Fit after self-cal, rms=0.127635Jy sigma=1.477453 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0158716 Jy ! Component: 100 - total flux cleaned = 0.0150456 Jy ! Component: 150 - total flux cleaned = 0.0139361 Jy ! Component: 200 - total flux cleaned = 0.0129434 Jy ! Total flux subtracted in 200 components = 0.0129434 Jy ! Clean residual min=-0.021359 max=0.023996 Jy/beam ! Clean residual mean=-0.000409 rms=0.005570 Jy/beam ! Combined flux in latest and established models = 0.813507 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 94 components and 0.813507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123759Jy sigma=1.429511 ! Fit after self-cal, rms=0.123103Jy sigma=1.418267 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.088 x 8.195 at 0.1153 degrees (North through East) ! Clean map min=-0.021002 max=0.53369 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123103Jy sigma=1.418267 ! Fit after self-cal, rms=0.115196Jy sigma=1.276690 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115196Jy sigma=1.276690 ! Fit after self-cal, rms=0.115292Jy sigma=1.276281 ! Inverting map and beam ! Estimated beam: bmin=3.081 mas, bmaj=8.178 mas, bpa=0.7226 degrees ! Estimated noise=1.65535 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00418861 Jy ! Component: 100 - total flux cleaned = 0.00400577 Jy ! Component: 150 - total flux cleaned = 0.00299002 Jy ! Component: 200 - total flux cleaned = 0.00228011 Jy ! Total flux subtracted in 200 components = 0.00228011 Jy ! Clean residual min=-0.014760 max=0.013226 Jy/beam ! Clean residual mean=0.000065 rms=0.003363 Jy/beam ! Combined flux in latest and established models = 0.815787 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 123 components and 0.815787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114097Jy sigma=1.262960 ! Fit after self-cal, rms=0.114036Jy sigma=1.260776 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114036Jy sigma=1.260776 ! Fit after self-cal, rms=0.113158Jy sigma=1.252147 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113158Jy sigma=1.252147 ! Fit after self-cal, rms=0.113192Jy sigma=1.252129 ! Inverting map and beam ! Estimated beam: bmin=3.079 mas, bmaj=8.169 mas, bpa=1.021 degrees ! Estimated noise=1.65482 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00306173 Jy ! Component: 100 - total flux cleaned = 0.0028919 Jy ! Component: 150 - total flux cleaned = 0.00240543 Jy ! Component: 200 - total flux cleaned = 0.00211473 Jy ! Total flux subtracted in 200 components = 0.00211473 Jy ! Clean residual min=-0.014408 max=0.012160 Jy/beam ! Clean residual mean=0.000091 rms=0.003311 Jy/beam ! Combined flux in latest and established models = 0.817902 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 136 components and 0.817902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112544Jy sigma=1.244533 ! Fit after self-cal, rms=0.112510Jy sigma=1.243313 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.188 mas, bmaj=27.65 mas, bpa=6.133 degrees ! Estimated noise=2.10788 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00270609 Jy ! Component: 100 - total flux cleaned = 0.00306815 Jy ! Component: 150 - total flux cleaned = 0.00328583 Jy ! Component: 200 - total flux cleaned = 0.00339354 Jy ! Total flux subtracted in 200 components = 0.00339354 Jy ! Clean residual min=-0.016705 max=0.011114 Jy/beam ! Clean residual mean=0.000171 rms=0.004598 Jy/beam ! Combined flux in latest and established models = 0.821295 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 149 components and 0.821295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112377Jy sigma=1.241513 ! Fit after self-cal, rms=0.112355Jy sigma=1.241045 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.414 mas, bmaj=6.323 mas, bpa=2.736 degrees ! Estimated noise=2.43683 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.468247 Jy ! Component: 100 - total flux cleaned = 0.583907 Jy ! Component: 150 - total flux cleaned = 0.649789 Jy ! Component: 200 - total flux cleaned = 0.693631 Jy ! Total flux subtracted in 200 components = 0.693631 Jy ! Clean residual min=-0.022410 max=0.025490 Jy/beam ! Clean residual mean=-0.000336 rms=0.005454 Jy/beam ! Combined flux in latest and established models = 0.693631 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 48 model components to the UV plane model. ! The established model now contains 48 components and 0.693631 Jy ! Inverting map and beam ! Estimated beam: bmin=3.079 mas, bmaj=8.169 mas, bpa=1.021 degrees ! Estimated noise=1.65482 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0556771 Jy ! Component: 100 - total flux cleaned = 0.0853634 Jy ! Component: 150 - total flux cleaned = 0.102535 Jy ! Component: 200 - total flux cleaned = 0.11268 Jy ! Total flux subtracted in 200 components = 0.11268 Jy ! Clean residual min=-0.014418 max=0.014480 Jy/beam ! Clean residual mean=0.000091 rms=0.003682 Jy/beam ! Combined flux in latest and established models = 0.806311 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 83 components and 0.806311 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.188 mas, bmaj=27.65 mas, bpa=6.133 degrees ! Estimated noise=2.10788 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110728 Jy ! Component: 100 - total flux cleaned = 0.0134383 Jy ! Component: 150 - total flux cleaned = 0.0141256 Jy ! Component: 200 - total flux cleaned = 0.0144449 Jy ! Total flux subtracted in 200 components = 0.0144449 Jy ! Clean residual min=-0.016382 max=0.012977 Jy/beam ! Clean residual mean=0.000194 rms=0.004806 Jy/beam ! Combined flux in latest and established models = 0.820756 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 95 components and 0.820756 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.079 mas, bmaj=8.169 mas, bpa=1.021 degrees ! Estimated noise=1.65482 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00315636 Jy ! Component: 100 - total flux cleaned = -0.00335517 Jy ! Component: 150 - total flux cleaned = -0.00336099 Jy ! Component: 200 - total flux cleaned = -0.00335891 Jy ! Total flux subtracted in 200 components = -0.00335891 Jy ! Clean residual min=-0.014843 max=0.011813 Jy/beam ! Clean residual mean=0.000101 rms=0.003397 Jy/beam ! Combined flux in latest and established models = 0.817397 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 108 components and 0.817397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112612Jy sigma=1.245688 ! Fit after self-cal, rms=0.112261Jy sigma=1.240765 wmodel J1316-3338_S_2004_05_27_yyk\_map.mod ! Writing 108 model components to file: J1316-3338_S_2004_05_27_yyk_map.mod wobs J1316-3338_S_2004_05_27_yyk\_uvs.fits ! Writing UV FITS file: J1316-3338_S_2004_05_27_yyk_uvs.fits wwins J1316-3338_S_2004_05_27_yyk\_map.win ! wwins: Wrote 2 windows to J1316-3338_S_2004_05_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00587966 Jy ! Component: 100 - total flux cleaned = -0.00682628 Jy ! Component: 150 - total flux cleaned = -0.00600857 Jy ! Component: 200 - total flux cleaned = -0.00524183 Jy ! Component: 250 - total flux cleaned = -0.00480163 Jy ! Component: 300 - total flux cleaned = -0.00354861 Jy ! Component: 350 - total flux cleaned = -0.00235202 Jy ! Component: 400 - total flux cleaned = -0.00158527 Jy ! Component: 450 - total flux cleaned = -0.0012163 Jy ! Component: 500 - total flux cleaned = -0.00109545 Jy ! Component: 550 - total flux cleaned = -0.000867314 Jy ! Component: 600 - total flux cleaned = -0.000761214 Jy ! Component: 650 - total flux cleaned = -0.000548809 Jy ! Component: 700 - total flux cleaned = -0.00013694 Jy ! Component: 750 - total flux cleaned = 0.000366672 Jy ! Component: 800 - total flux cleaned = 0.000759863 Jy ! Component: 850 - total flux cleaned = 0.00114413 Jy ! Component: 900 - total flux cleaned = 0.00161168 Jy ! Component: 950 - total flux cleaned = 0.00197792 Jy ! Component: 1000 - total flux cleaned = 0.0024252 Jy ! Component: 1050 - total flux cleaned = 0.00251081 Jy ! Component: 1100 - total flux cleaned = 0.00268248 Jy ! Component: 1150 - total flux cleaned = 0.00284851 Jy ! Component: 1200 - total flux cleaned = 0.0030105 Jy ! Component: 1250 - total flux cleaned = 0.00300948 Jy ! Component: 1300 - total flux cleaned = 0.0030901 Jy ! Component: 1350 - total flux cleaned = 0.00332365 Jy ! Component: 1400 - total flux cleaned = 0.00355191 Jy ! Component: 1450 - total flux cleaned = 0.00362689 Jy ! Component: 1500 - total flux cleaned = 0.0038484 Jy ! Component: 1550 - total flux cleaned = 0.00413609 Jy ! Component: 1600 - total flux cleaned = 0.00420644 Jy ! Component: 1650 - total flux cleaned = 0.00413678 Jy ! Component: 1700 - total flux cleaned = 0.00441063 Jy ! Component: 1750 - total flux cleaned = 0.00440945 Jy ! Component: 1800 - total flux cleaned = 0.00454262 Jy ! Component: 1850 - total flux cleaned = 0.00460828 Jy ! Component: 1900 - total flux cleaned = 0.00467271 Jy ! Component: 1950 - total flux cleaned = 0.00473643 Jy ! Component: 2000 - total flux cleaned = 0.00473644 Jy ! Total flux subtracted in 2048 components = 0.00498328 Jy ! Clean residual min=-0.003319 max=0.003408 Jy/beam ! Clean residual mean=0.000080 rms=0.001370 Jy/beam ! Combined flux in latest and established models = 0.82238 Jy keep ! Adding 120 model components to the UV plane model. ! The established model now contains 228 components and 0.822381 Jy ![Exited script file: muppet] wmap "J1316-3338_S_2004_05_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.079 x 8.169 at 1.021 degrees (North through East) ! Clean map min=-0.010321 max=0.53197 Jy/beam ! Writing clean map to FITS file: J1316-3338_S_2004_05_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.531974 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00135801 device "J1316-3338_S_2004_05_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J1316-3338_S_2004_05_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.765832 0.765832 1.53166 3.06333 6.12666 12.2533 24.5066 49.0133 98.0265 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.004 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.531 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.079 x 8.169 at 1.021 degrees (North through East) ! Clean map min=-0.010321 max=0.53197 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1316-3338_S_2004_05_27_yyk\_map.gif/gif" ! Attempting to open device: 'J1316-3338_S_2004_05_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1316-3338_S_2004_05_27_yyk_uvs.log closed on Wed Dec 7 00:26:48 2005