! Started logfile: J1253-4059_S_2004_05_08_yyk_uvs.log on Wed Dec 7 00:24:47 2005 obs J1253-4059_S_2004_05_08_yyk_uve.fits ! Reading UV FITS file: J1253-4059_S_2004_05_08_yyk_uve.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.50101 visibilities/baseline/integration-bin. ! Found source: J1253-4059 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1433 lines of history. ! ! Reading 992 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1253-4059_S_2004_05_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.154402 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.881621Jy sigma=11.472302 ! Fit after self-cal, rms=0.881476Jy sigma=11.469423 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.207 mas, bmaj=6.841 mas, bpa=-2.124 degrees ! Estimated noise=3.10201 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.10577 Jy ! Component: 100 - total flux cleaned = 0.126116 Jy ! Total flux subtracted in 100 components = 0.126116 Jy ! Clean residual min=-0.009466 max=0.011454 Jy/beam ! Clean residual mean=-0.000030 rms=0.002889 Jy/beam ! Combined flux in latest and established models = 0.126116 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.126116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091895Jy sigma=1.033583 ! Fit after self-cal, rms=0.091858Jy sigma=1.033208 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.777 mas, bmaj=7.911 mas, bpa=-2.803 degrees ! Estimated noise=1.78294 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112481 Jy ! Component: 100 - total flux cleaned = 0.0147445 Jy ! Component: 150 - total flux cleaned = 0.0155029 Jy ! Component: 200 - total flux cleaned = 0.0155433 Jy ! Total flux subtracted in 200 components = 0.0155433 Jy ! Clean residual min=-0.007136 max=0.007243 Jy/beam ! Clean residual mean=-0.000007 rms=0.002303 Jy/beam ! Combined flux in latest and established models = 0.141659 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 29 components and 0.141659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091709Jy sigma=1.020171 ! Fit after self-cal, rms=0.091680Jy sigma=1.019939 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.091680Jy sigma=1.019939 ! Fit after self-cal, rms=0.091680Jy sigma=1.019939 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091680Jy sigma=1.019939 ! Fit after self-cal, rms=0.091662Jy sigma=1.019787 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.777 mas, bmaj=7.911 mas, bpa=-2.803 degrees ! Estimated noise=1.78294 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0001237 Jy ! Component: 100 - total flux cleaned = 8.77311e-05 Jy ! Component: 150 - total flux cleaned = 8.68616e-05 Jy ! Component: 200 - total flux cleaned = 8.44961e-05 Jy ! Total flux subtracted in 200 components = 8.44961e-05 Jy ! Clean residual min=-0.007075 max=0.007102 Jy/beam ! Clean residual mean=-0.000006 rms=0.002297 Jy/beam ! Combined flux in latest and established models = 0.141744 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 0.141744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091652Jy sigma=1.019521 ! Fit after self-cal, rms=0.091635Jy sigma=1.019366 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091635Jy sigma=1.019366 ! Fit after self-cal, rms=0.087706Jy sigma=0.975306 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177413 Jy ! Component: 100 - total flux cleaned = 0.00194366 Jy ! Component: 150 - total flux cleaned = 0.00201687 Jy ! Component: 200 - total flux cleaned = 0.00201451 Jy ! Total flux subtracted in 200 components = 0.00201451 Jy ! Clean residual min=-0.006832 max=0.006715 Jy/beam ! Clean residual mean=0.000005 rms=0.002166 Jy/beam ! Combined flux in latest and established models = 0.143758 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 36 components and 0.143758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087738Jy sigma=0.974618 ! Fit after self-cal, rms=0.087511Jy sigma=0.972123 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.777 x 7.911 at -2.803 degrees (North through East) ! Clean map min=-0.0068328 max=0.13042 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087511Jy sigma=0.972123 ! Fit after self-cal, rms=0.089291Jy sigma=0.968947 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089291Jy sigma=0.968947 ! Fit after self-cal, rms=0.089312Jy sigma=0.968700 ! Inverting map and beam ! Estimated beam: bmin=2.802 mas, bmaj=7.962 mas, bpa=-2.576 degrees ! Estimated noise=1.79029 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -2.29928e-05 Jy ! Component: 100 - total flux cleaned = -0.000115226 Jy ! Component: 150 - total flux cleaned = -0.000117633 Jy ! Component: 200 - total flux cleaned = -0.00012188 Jy ! Total flux subtracted in 200 components = -0.00012188 Jy ! Clean residual min=-0.006861 max=0.006181 Jy/beam ! Clean residual mean=0.000052 rms=0.001986 Jy/beam ! Combined flux in latest and established models = 0.143636 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 37 components and 0.143636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089285Jy sigma=0.968282 ! Fit after self-cal, rms=0.089291Jy sigma=0.968243 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089291Jy sigma=0.968243 ! Fit after self-cal, rms=0.091050Jy sigma=0.969443 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091050Jy sigma=0.969443 ! Fit after self-cal, rms=0.091092Jy sigma=0.969235 ! Inverting map and beam ! Estimated beam: bmin=2.843 mas, bmaj=8.042 mas, bpa=-2.972 degrees ! Estimated noise=1.77988 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00214915 Jy ! Component: 100 - total flux cleaned = -0.00234023 Jy ! Component: 150 - total flux cleaned = -0.00234194 Jy ! Component: 200 - total flux cleaned = -0.00236969 Jy ! Total flux subtracted in 200 components = -0.00236969 Jy ! Clean residual min=-0.005903 max=0.005866 Jy/beam ! Clean residual mean=-0.000013 rms=0.001851 Jy/beam ! Combined flux in latest and established models = 0.141267 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 41 components and 0.141267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091015Jy sigma=0.968605 ! Fit after self-cal, rms=0.091017Jy sigma=0.968577 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.957 mas, bmaj=31.01 mas, bpa=0.3102 degrees ! Estimated noise=2.37239 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000968809 Jy ! Component: 100 - total flux cleaned = 0.00097001 Jy ! Component: 150 - total flux cleaned = 0.000968041 Jy ! Component: 200 - total flux cleaned = 0.000969989 Jy ! Total flux subtracted in 200 components = 0.000969989 Jy ! Clean residual min=-0.007743 max=0.007027 Jy/beam ! Clean residual mean=-0.000028 rms=0.002787 Jy/beam ! Combined flux in latest and established models = 0.142237 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 45 components and 0.142237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091038Jy sigma=0.968770 ! Fit after self-cal, rms=0.091045Jy sigma=0.968734 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.223 mas, bmaj=6.858 mas, bpa=-1.953 degrees ! Estimated noise=3.15202 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.10958 Jy ! Component: 100 - total flux cleaned = 0.129692 Jy ! Component: 150 - total flux cleaned = 0.136319 Jy ! Component: 200 - total flux cleaned = 0.137408 Jy ! Total flux subtracted in 200 components = 0.137408 Jy ! Clean residual min=-0.008341 max=0.009790 Jy/beam ! Clean residual mean=-0.000013 rms=0.002442 Jy/beam ! Combined flux in latest and established models = 0.137408 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.137408 Jy ! Inverting map and beam ! Estimated beam: bmin=2.843 mas, bmaj=8.042 mas, bpa=-2.972 degrees ! Estimated noise=1.77988 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00424598 Jy ! Component: 100 - total flux cleaned = 0.00417092 Jy ! Component: 150 - total flux cleaned = 0.00410176 Jy ! Component: 200 - total flux cleaned = 0.00404237 Jy ! Total flux subtracted in 200 components = 0.00404237 Jy ! Clean residual min=-0.006152 max=0.005924 Jy/beam ! Clean residual mean=-0.000013 rms=0.001872 Jy/beam ! Combined flux in latest and established models = 0.14145 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 29 components and 0.14145 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.957 mas, bmaj=31.01 mas, bpa=0.3102 degrees ! Estimated noise=2.37239 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102899 Jy ! Component: 100 - total flux cleaned = 0.00102515 Jy ! Component: 150 - total flux cleaned = 0.00102028 Jy ! Component: 200 - total flux cleaned = 0.0010149 Jy ! Total flux subtracted in 200 components = 0.0010149 Jy ! Clean residual min=-0.007778 max=0.007024 Jy/beam ! Clean residual mean=-0.000029 rms=0.002776 Jy/beam ! Combined flux in latest and established models = 0.142465 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 33 components and 0.142465 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.843 mas, bmaj=8.042 mas, bpa=-2.972 degrees ! Estimated noise=1.77988 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00113665 Jy ! Component: 100 - total flux cleaned = -0.00113429 Jy ! Component: 150 - total flux cleaned = -0.00109343 Jy ! Component: 200 - total flux cleaned = -0.00109248 Jy ! Total flux subtracted in 200 components = -0.00109248 Jy ! Clean residual min=-0.005936 max=0.005927 Jy/beam ! Clean residual mean=-0.000013 rms=0.001858 Jy/beam ! Combined flux in latest and established models = 0.141373 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 43 components and 0.141373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091061Jy sigma=0.968839 ! Fit after self-cal, rms=0.091059Jy sigma=0.968825 wmodel J1253-4059_S_2004_05_08_yyk\_map.mod ! Writing 43 model components to file: J1253-4059_S_2004_05_08_yyk_map.mod wobs J1253-4059_S_2004_05_08_yyk\_uvs.fits ! Writing UV FITS file: J1253-4059_S_2004_05_08_yyk_uvs.fits wwins J1253-4059_S_2004_05_08_yyk\_map.win ! wwins: Wrote 1 windows to J1253-4059_S_2004_05_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00019672 Jy ! Component: 100 - total flux cleaned = -0.000604132 Jy ! Component: 150 - total flux cleaned = -0.00101616 Jy ! Component: 200 - total flux cleaned = -0.00109249 Jy ! Component: 250 - total flux cleaned = -0.00102064 Jy ! Component: 300 - total flux cleaned = -0.00102081 Jy ! Component: 350 - total flux cleaned = -0.000956481 Jy ! Component: 400 - total flux cleaned = -0.00102107 Jy ! Component: 450 - total flux cleaned = -0.000901185 Jy ! Component: 500 - total flux cleaned = -0.000785158 Jy ! Component: 550 - total flux cleaned = -0.000952606 Jy ! Component: 600 - total flux cleaned = -0.00100654 Jy ! Component: 650 - total flux cleaned = -0.00105742 Jy ! Component: 700 - total flux cleaned = -0.0010569 Jy ! Component: 750 - total flux cleaned = -0.00125565 Jy ! Component: 800 - total flux cleaned = -0.00130429 Jy ! Component: 850 - total flux cleaned = -0.00149529 Jy ! Component: 900 - total flux cleaned = -0.00149508 Jy ! Component: 950 - total flux cleaned = -0.00163414 Jy ! Component: 1000 - total flux cleaned = -0.00181629 Jy ! Component: 1050 - total flux cleaned = -0.00199533 Jy ! Component: 1100 - total flux cleaned = -0.00203929 Jy ! Component: 1150 - total flux cleaned = -0.00216953 Jy ! Component: 1200 - total flux cleaned = -0.00221204 Jy ! Component: 1250 - total flux cleaned = -0.00238128 Jy ! Component: 1300 - total flux cleaned = -0.0025491 Jy ! Component: 1350 - total flux cleaned = -0.00271534 Jy ! Component: 1400 - total flux cleaned = -0.00275623 Jy ! Component: 1450 - total flux cleaned = -0.00283818 Jy ! Component: 1500 - total flux cleaned = -0.00283797 Jy ! Component: 1550 - total flux cleaned = -0.00291918 Jy ! Component: 1600 - total flux cleaned = -0.002919 Jy ! Component: 1650 - total flux cleaned = -0.00291915 Jy ! Component: 1700 - total flux cleaned = -0.00295964 Jy ! Component: 1750 - total flux cleaned = -0.00304041 Jy ! Component: 1800 - total flux cleaned = -0.00308082 Jy ! Component: 1850 - total flux cleaned = -0.00308085 Jy ! Component: 1900 - total flux cleaned = -0.00312129 Jy ! Component: 1950 - total flux cleaned = -0.00312124 Jy ! Component: 2000 - total flux cleaned = -0.0031619 Jy ! Total flux subtracted in 2048 components = -0.0031211 Jy ! Clean residual min=-0.002971 max=0.002700 Jy/beam ! Clean residual mean=0.000070 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 0.138252 Jy keep ! Adding 120 model components to the UV plane model. ! The established model now contains 163 components and 0.138252 Jy ![Exited script file: muppet] wmap "J1253-4059_S_2004_05_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.843 x 8.042 at -2.972 degrees (North through East) ! Clean map min=-0.0038341 max=0.1295 Jy/beam ! Writing clean map to FITS file: J1253-4059_S_2004_05_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.129498 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000807736 device "J1253-4059_S_2004_05_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J1253-4059_S_2004_05_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.87123 1.87123 3.74246 7.48492 14.9698 29.9397 59.8794 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0024 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.129 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.843 x 8.042 at -2.972 degrees (North through East) ! Clean map min=-0.0038341 max=0.1295 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1253-4059_S_2004_05_08_yyk\_map.gif/gif" ! Attempting to open device: 'J1253-4059_S_2004_05_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1253-4059_S_2004_05_08_yyk_uvs.log closed on Wed Dec 7 00:24:52 2005