! Started logfile: J1252-3319_X_2004_04_30_yyk_uvs.log on Wed Dec 7 00:24:43 2005 obs J1252-3319_X_2004_04_30_yyk_uve.fits ! Reading UV FITS file: J1252-3319_X_2004_04_30_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1252-3319 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1544 lines of history. ! ! Reading 720 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1252-3319_X_2004_04_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.400217 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.630196Jy sigma=9.299325 ! Fit after self-cal, rms=0.629988Jy sigma=9.297470 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6778 mas, bmaj=1.815 mas, bpa=-4.824 degrees ! Estimated noise=2.40912 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.334227 Jy ! Component: 100 - total flux cleaned = 0.385313 Jy ! Total flux subtracted in 100 components = 0.385313 Jy ! Clean residual min=-0.012766 max=0.026533 Jy/beam ! Clean residual mean=-0.000031 rms=0.004285 Jy/beam ! Combined flux in latest and established models = 0.385314 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.385314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118613Jy sigma=1.320951 ! Fit after self-cal, rms=0.118611Jy sigma=1.320849 ! Inverting map ! Added new window around map position (-1, 1.8). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0265938 Jy ! Component: 100 - total flux cleaned = 0.0363867 Jy ! Total flux subtracted in 100 components = 0.0363867 Jy ! Clean residual min=-0.011761 max=0.014761 Jy/beam ! Clean residual mean=0.000026 rms=0.003266 Jy/beam ! Combined flux in latest and established models = 0.4217 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 18 components and 0.4217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114578Jy sigma=1.225827 ! Fit after self-cal, rms=0.114323Jy sigma=1.216314 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8145 mas, bmaj=2.211 mas, bpa=-2.634 degrees ! Estimated noise=1.72596 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00867631 Jy ! Component: 100 - total flux cleaned = 0.0108952 Jy ! Component: 150 - total flux cleaned = 0.0113373 Jy ! Component: 200 - total flux cleaned = 0.0116284 Jy ! Total flux subtracted in 200 components = 0.0116284 Jy ! Clean residual min=-0.009450 max=0.010692 Jy/beam ! Clean residual mean=0.000050 rms=0.002723 Jy/beam ! Combined flux in latest and established models = 0.433329 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 29 components and 0.433329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114071Jy sigma=1.205554 ! Fit after self-cal, rms=0.113989Jy sigma=1.204756 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.995764 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 1.17 KP 0.96 ! LA 0.97 MK 0.98 NL 1.04 OV 0.98 ! PT 0.97 SC 1.02 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.988552 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.02 HN 1.00 KP 0.93 ! LA 0.98 MK 1.05 NL 1.01 OV 0.99 ! PT 1.09 SC 0.99 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.966931 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 1.13 KP 0.97 ! LA 0.99 MK 1.05 NL 1.00 OV 1.00 ! PT 1.15 SC 1.03 ! ! ! Fit before self-cal, rms=0.113989Jy sigma=1.204756 ! Fit after self-cal, rms=0.111977Jy sigma=1.164470 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111977Jy sigma=1.164470 ! Fit after self-cal, rms=0.111989Jy sigma=1.164452 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8208 mas, bmaj=2.221 mas, bpa=-2.404 degrees ! Estimated noise=1.70864 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00502711 Jy ! Component: 100 - total flux cleaned = -0.00583351 Jy ! Component: 150 - total flux cleaned = -0.00611194 Jy ! Component: 200 - total flux cleaned = -0.0061764 Jy ! Total flux subtracted in 200 components = -0.00617639 Jy ! Clean residual min=-0.008049 max=0.008514 Jy/beam ! Clean residual mean=0.000015 rms=0.002164 Jy/beam ! Combined flux in latest and established models = 0.427152 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 41 components and 0.427152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111559Jy sigma=1.160544 ! Fit after self-cal, rms=0.111481Jy sigma=1.160401 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111481Jy sigma=1.160401 ! Fit after self-cal, rms=0.107746Jy sigma=1.115890 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000121895 Jy ! Component: 100 - total flux cleaned = 0.000178612 Jy ! Component: 150 - total flux cleaned = 0.000227854 Jy ! Component: 200 - total flux cleaned = 0.000225095 Jy ! Total flux subtracted in 200 components = 0.000225095 Jy ! Clean residual min=-0.008000 max=0.008209 Jy/beam ! Clean residual mean=0.000015 rms=0.002144 Jy/beam ! Combined flux in latest and established models = 0.427377 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 45 components and 0.427377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107733Jy sigma=1.115132 ! Fit after self-cal, rms=0.107689Jy sigma=1.110192 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8208 x 2.221 at -2.404 degrees (North through East) ! Clean map min=-0.0075889 max=0.3683 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107689Jy sigma=1.110192 ! Fit after self-cal, rms=0.108524Jy sigma=1.098282 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108524Jy sigma=1.098282 ! Fit after self-cal, rms=0.108701Jy sigma=1.097635 ! Inverting map and beam ! Estimated beam: bmin=0.8227 mas, bmaj=2.224 mas, bpa=-2.51 degrees ! Estimated noise=1.73211 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0050365 Jy ! Component: 100 - total flux cleaned = 0.0054786 Jy ! Component: 150 - total flux cleaned = 0.00553304 Jy ! Component: 200 - total flux cleaned = 0.00553779 Jy ! Total flux subtracted in 200 components = 0.00553779 Jy ! Clean residual min=-0.007996 max=0.008171 Jy/beam ! Clean residual mean=0.000009 rms=0.002110 Jy/beam ! Combined flux in latest and established models = 0.432915 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 54 components and 0.432915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108884Jy sigma=1.093677 ! Fit after self-cal, rms=0.108978Jy sigma=1.093513 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108978Jy sigma=1.093513 ! Fit after self-cal, rms=0.108574Jy sigma=1.046851 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108574Jy sigma=1.046851 ! Fit after self-cal, rms=0.108606Jy sigma=1.046783 ! Inverting map and beam ! Estimated beam: bmin=0.8276 mas, bmaj=2.23 mas, bpa=-2.609 degrees ! Estimated noise=1.72728 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00311433 Jy ! Component: 100 - total flux cleaned = -0.00332706 Jy ! Component: 150 - total flux cleaned = -0.0034504 Jy ! Component: 200 - total flux cleaned = -0.0036144 Jy ! Total flux subtracted in 200 components = -0.0036144 Jy ! Clean residual min=-0.007388 max=0.007172 Jy/beam ! Clean residual mean=-0.000019 rms=0.001951 Jy/beam ! Combined flux in latest and established models = 0.429301 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 60 components and 0.429301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108545Jy sigma=1.044738 ! Fit after self-cal, rms=0.108546Jy sigma=1.044646 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.456 mas, bmaj=7.567 mas, bpa=-0.2278 degrees ! Estimated noise=2.25905 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000349776 Jy ! Component: 100 - total flux cleaned = 0.000550931 Jy ! Component: 150 - total flux cleaned = 0.000716193 Jy ! Component: 200 - total flux cleaned = 0.000896528 Jy ! Total flux subtracted in 200 components = 0.000896528 Jy ! Clean residual min=-0.009032 max=0.008050 Jy/beam ! Clean residual mean=-0.000029 rms=0.002719 Jy/beam ! Combined flux in latest and established models = 0.430197 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 61 components and 0.430197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108655Jy sigma=1.044989 ! Fit after self-cal, rms=0.108613Jy sigma=1.044742 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6823 mas, bmaj=1.814 mas, bpa=-4.811 degrees ! Estimated noise=2.43407 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.33788 Jy ! Component: 100 - total flux cleaned = 0.391545 Jy ! Component: 150 - total flux cleaned = 0.410709 Jy ! Component: 200 - total flux cleaned = 0.419945 Jy ! Total flux subtracted in 200 components = 0.419945 Jy ! Clean residual min=-0.009049 max=0.009366 Jy/beam ! Clean residual mean=-0.000003 rms=0.002347 Jy/beam ! Combined flux in latest and established models = 0.419945 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.419945 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8276 mas, bmaj=2.23 mas, bpa=-2.609 degrees ! Estimated noise=1.72728 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00664606 Jy ! Component: 100 - total flux cleaned = 0.00722415 Jy ! Component: 150 - total flux cleaned = 0.00757447 Jy ! Component: 200 - total flux cleaned = 0.00787396 Jy ! Total flux subtracted in 200 components = 0.00787396 Jy ! Clean residual min=-0.007562 max=0.007019 Jy/beam ! Clean residual mean=-0.000025 rms=0.001998 Jy/beam ! Combined flux in latest and established models = 0.427819 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 29 components and 0.427819 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.456 mas, bmaj=7.567 mas, bpa=-0.2278 degrees ! Estimated noise=2.25905 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116765 Jy ! Component: 100 - total flux cleaned = 0.00138745 Jy ! Component: 150 - total flux cleaned = 0.00156269 Jy ! Component: 200 - total flux cleaned = 0.00170535 Jy ! Total flux subtracted in 200 components = 0.00170535 Jy ! Clean residual min=-0.009261 max=0.008032 Jy/beam ! Clean residual mean=-0.000034 rms=0.002730 Jy/beam ! Combined flux in latest and established models = 0.429524 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 32 components and 0.429524 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8276 mas, bmaj=2.23 mas, bpa=-2.609 degrees ! Estimated noise=1.72728 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -6.9664e-05 Jy ! Component: 100 - total flux cleaned = 5.40584e-06 Jy ! Component: 150 - total flux cleaned = -5.30252e-05 Jy ! Component: 200 - total flux cleaned = -0.000107168 Jy ! Total flux subtracted in 200 components = -0.000107168 Jy ! Clean residual min=-0.007329 max=0.007152 Jy/beam ! Clean residual mean=-0.000020 rms=0.001944 Jy/beam ! Combined flux in latest and established models = 0.429417 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 40 components and 0.429417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108898Jy sigma=1.044957 ! Fit after self-cal, rms=0.108885Jy sigma=1.044792 wmodel J1252-3319_X_2004_04_30_yyk\_map.mod ! Writing 40 model components to file: J1252-3319_X_2004_04_30_yyk_map.mod wobs J1252-3319_X_2004_04_30_yyk\_uvs.fits ! Writing UV FITS file: J1252-3319_X_2004_04_30_yyk_uvs.fits wwins J1252-3319_X_2004_04_30_yyk\_map.win ! wwins: Wrote 2 windows to J1252-3319_X_2004_04_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142832 Jy ! Component: 100 - total flux cleaned = 0.00307059 Jy ! Component: 150 - total flux cleaned = 0.00435213 Jy ! Component: 200 - total flux cleaned = 0.00475055 Jy ! Component: 250 - total flux cleaned = 0.00465594 Jy ! Component: 300 - total flux cleaned = 0.0049201 Jy ! Component: 350 - total flux cleaned = 0.00508996 Jy ! Component: 400 - total flux cleaned = 0.00517145 Jy ! Component: 450 - total flux cleaned = 0.00501479 Jy ! Component: 500 - total flux cleaned = 0.00508783 Jy ! Component: 550 - total flux cleaned = 0.00472284 Jy ! Component: 600 - total flux cleaned = 0.00479537 Jy ! Component: 650 - total flux cleaned = 0.00486273 Jy ! Component: 700 - total flux cleaned = 0.00466435 Jy ! Component: 750 - total flux cleaned = 0.00440853 Jy ! Component: 800 - total flux cleaned = 0.00409943 Jy ! Component: 850 - total flux cleaned = 0.00416219 Jy ! Component: 900 - total flux cleaned = 0.00428102 Jy ! Component: 950 - total flux cleaned = 0.00433762 Jy ! Component: 1000 - total flux cleaned = 0.00433742 Jy ! Component: 1050 - total flux cleaned = 0.00439359 Jy ! Component: 1100 - total flux cleaned = 0.00434062 Jy ! Component: 1150 - total flux cleaned = 0.00434127 Jy ! Component: 1200 - total flux cleaned = 0.0041864 Jy ! Component: 1250 - total flux cleaned = 0.00438967 Jy ! Component: 1300 - total flux cleaned = 0.00429006 Jy ! Component: 1350 - total flux cleaned = 0.0044372 Jy ! Component: 1400 - total flux cleaned = 0.00453309 Jy ! Component: 1450 - total flux cleaned = 0.00458045 Jy ! Component: 1500 - total flux cleaned = 0.00453495 Jy ! Component: 1550 - total flux cleaned = 0.00467348 Jy ! Component: 1600 - total flux cleaned = 0.00467394 Jy ! Component: 1650 - total flux cleaned = 0.00467423 Jy ! Component: 1700 - total flux cleaned = 0.00471836 Jy ! Component: 1750 - total flux cleaned = 0.00471886 Jy ! Component: 1800 - total flux cleaned = 0.00467615 Jy ! Component: 1850 - total flux cleaned = 0.00450571 Jy ! Component: 1900 - total flux cleaned = 0.00416782 Jy ! Component: 1950 - total flux cleaned = 0.00408456 Jy ! Component: 2000 - total flux cleaned = 0.00383553 Jy ! Total flux subtracted in 2048 components = 0.00362969 Jy ! Clean residual min=-0.002531 max=0.002238 Jy/beam ! Clean residual mean=-0.000017 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.433047 Jy keep ! Adding 123 model components to the UV plane model. ! The established model now contains 163 components and 0.433047 Jy ![Exited script file: muppet] wmap "J1252-3319_X_2004_04_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8276 x 2.23 at -2.609 degrees (North through East) ! Clean map min=-0.0044532 max=0.3766 Jy/beam ! Writing clean map to FITS file: J1252-3319_X_2004_04_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.376604 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000772275 device "J1252-3319_X_2004_04_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J1252-3319_X_2004_04_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.615188 0.615188 1.23038 2.46075 4.9215 9.843 19.686 39.372 78.744 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.376 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8276 x 2.23 at -2.609 degrees (North through East) ! Clean map min=-0.0044532 max=0.3766 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1252-3319_X_2004_04_30_yyk\_map.gif/gif" ! Attempting to open device: 'J1252-3319_X_2004_04_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1252-3319_X_2004_04_30_yyk_uvs.log closed on Wed Dec 7 00:24:47 2005