! Started logfile: J1252-3319_S_2004_04_30_yyk_uvs.log on Wed Dec 7 00:24:38 2005 obs J1252-3319_S_2004_04_30_yyk_uve.fits ! Reading UV FITS file: J1252-3319_S_2004_04_30_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1252-3319 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1627 lines of history. ! ! Reading 720 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1252-3319_S_2004_04_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.361153 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.672571Jy sigma=9.040177 ! Fit after self-cal, rms=0.672473Jy sigma=9.037777 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.321 mas, bmaj=7.4 mas, bpa=-8.319 degrees ! Estimated noise=2.98303 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.288353 Jy ! Component: 100 - total flux cleaned = 0.329478 Jy ! Total flux subtracted in 100 components = 0.329478 Jy ! Clean residual min=-0.015102 max=0.020885 Jy/beam ! Clean residual mean=-0.000184 rms=0.004244 Jy/beam ! Combined flux in latest and established models = 0.329478 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.329478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124345Jy sigma=1.237460 ! Fit after self-cal, rms=0.124289Jy sigma=1.237123 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.069 mas, bmaj=8.611 mas, bpa=-5.911 degrees ! Estimated noise=2.10603 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.026022 Jy ! Component: 100 - total flux cleaned = 0.0362222 Jy ! Component: 150 - total flux cleaned = 0.0379862 Jy ! Component: 200 - total flux cleaned = 0.0385376 Jy ! Total flux subtracted in 200 components = 0.0385376 Jy ! Clean residual min=-0.013106 max=0.012497 Jy/beam ! Clean residual mean=-0.000370 rms=0.003588 Jy/beam ! Combined flux in latest and established models = 0.368015 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 24 components and 0.368015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121618Jy sigma=1.169298 ! Fit after self-cal, rms=0.121511Jy sigma=1.168550 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.971723 ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.01 HN 1.16 KP 0.96 ! LA 1.14 MK 0.99 NL 1.00 OV 0.89 ! PT 1.00 SC 0.97 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.121511Jy sigma=1.168550 ! Fit after self-cal, rms=0.119670Jy sigma=1.144150 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119670Jy sigma=1.144150 ! Fit after self-cal, rms=0.119671Jy sigma=1.144120 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.064 mas, bmaj=8.583 mas, bpa=-5.877 degrees ! Estimated noise=2.08196 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00202755 Jy ! Component: 100 - total flux cleaned = -0.00203622 Jy ! Component: 150 - total flux cleaned = -0.00189065 Jy ! Component: 200 - total flux cleaned = -0.00149474 Jy ! Total flux subtracted in 200 components = -0.00149474 Jy ! Clean residual min=-0.009758 max=0.008484 Jy/beam ! Clean residual mean=-0.000236 rms=0.002646 Jy/beam ! Combined flux in latest and established models = 0.366521 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 31 components and 0.366521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119418Jy sigma=1.137906 ! Fit after self-cal, rms=0.119401Jy sigma=1.137754 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119401Jy sigma=1.137754 ! Fit after self-cal, rms=0.116041Jy sigma=1.094176 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112203 Jy ! Component: 100 - total flux cleaned = 0.00136444 Jy ! Component: 150 - total flux cleaned = 0.00159259 Jy ! Component: 200 - total flux cleaned = 0.00181059 Jy ! Total flux subtracted in 200 components = 0.00181059 Jy ! Clean residual min=-0.009447 max=0.008358 Jy/beam ! Clean residual mean=-0.000230 rms=0.002520 Jy/beam ! Combined flux in latest and established models = 0.368331 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 34 components and 0.368331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115874Jy sigma=1.091082 ! Fit after self-cal, rms=0.115800Jy sigma=1.086109 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.064 x 8.583 at -5.877 degrees (North through East) ! Clean map min=-0.0091936 max=0.32022 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115800Jy sigma=1.086109 ! Fit after self-cal, rms=0.116740Jy sigma=1.078427 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116740Jy sigma=1.078427 ! Fit after self-cal, rms=0.116898Jy sigma=1.077661 ! Inverting map and beam ! Estimated beam: bmin=3.05 mas, bmaj=8.556 mas, bpa=-5.904 degrees ! Estimated noise=2.11308 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00686434 Jy ! Component: 100 - total flux cleaned = 0.00828866 Jy ! Component: 150 - total flux cleaned = 0.00869191 Jy ! Component: 200 - total flux cleaned = 0.00887176 Jy ! Total flux subtracted in 200 components = 0.00887176 Jy ! Clean residual min=-0.009507 max=0.008233 Jy/beam ! Clean residual mean=-0.000244 rms=0.002525 Jy/beam ! Combined flux in latest and established models = 0.377203 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 38 components and 0.377203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116560Jy sigma=1.071585 ! Fit after self-cal, rms=0.116713Jy sigma=1.071319 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116713Jy sigma=1.071319 ! Fit after self-cal, rms=0.115926Jy sigma=1.014777 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115926Jy sigma=1.014777 ! Fit after self-cal, rms=0.116086Jy sigma=1.014596 ! Inverting map and beam ! Estimated beam: bmin=3.031 mas, bmaj=8.505 mas, bpa=-6.35 degrees ! Estimated noise=2.08932 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00134155 Jy ! Component: 100 - total flux cleaned = -0.00107138 Jy ! Component: 150 - total flux cleaned = -0.000886429 Jy ! Component: 200 - total flux cleaned = -0.000815345 Jy ! Total flux subtracted in 200 components = -0.000815345 Jy ! Clean residual min=-0.008154 max=0.006836 Jy/beam ! Clean residual mean=-0.000163 rms=0.002089 Jy/beam ! Combined flux in latest and established models = 0.376388 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 47 components and 0.376388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116090Jy sigma=1.010489 ! Fit after self-cal, rms=0.116201Jy sigma=1.010413 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.217 mas, bmaj=25.73 mas, bpa=-1.543 degrees ! Estimated noise=2.71435 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103118 Jy ! Component: 100 - total flux cleaned = 0.00107885 Jy ! Component: 150 - total flux cleaned = 0.0011252 Jy ! Component: 200 - total flux cleaned = 0.00116936 Jy ! Total flux subtracted in 200 components = 0.00116936 Jy ! Clean residual min=-0.007420 max=0.006190 Jy/beam ! Clean residual mean=-0.000289 rms=0.002299 Jy/beam ! Combined flux in latest and established models = 0.377557 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 53 components and 0.377557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116184Jy sigma=1.010552 ! Fit after self-cal, rms=0.116247Jy sigma=1.010454 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.303 mas, bmaj=7.321 mas, bpa=-8.333 degrees ! Estimated noise=3.0078 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.291603 Jy ! Component: 100 - total flux cleaned = 0.336317 Jy ! Component: 150 - total flux cleaned = 0.354005 Jy ! Component: 200 - total flux cleaned = 0.363642 Jy ! Total flux subtracted in 200 components = 0.363642 Jy ! Clean residual min=-0.011503 max=0.010451 Jy/beam ! Clean residual mean=-0.000085 rms=0.003094 Jy/beam ! Combined flux in latest and established models = 0.363642 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.363642 Jy ! Inverting map and beam ! Estimated beam: bmin=3.031 mas, bmaj=8.505 mas, bpa=-6.35 degrees ! Estimated noise=2.08932 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00571577 Jy ! Component: 100 - total flux cleaned = 0.00636918 Jy ! Component: 150 - total flux cleaned = 0.00679375 Jy ! Component: 200 - total flux cleaned = 0.00717367 Jy ! Total flux subtracted in 200 components = 0.00717367 Jy ! Clean residual min=-0.008384 max=0.006853 Jy/beam ! Clean residual mean=-0.000179 rms=0.002222 Jy/beam ! Combined flux in latest and established models = 0.370816 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 29 components and 0.370816 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.217 mas, bmaj=25.73 mas, bpa=-1.543 degrees ! Estimated noise=2.71435 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00357378 Jy ! Component: 100 - total flux cleaned = 0.00372681 Jy ! Component: 150 - total flux cleaned = 0.00387411 Jy ! Component: 200 - total flux cleaned = 0.00401607 Jy ! Total flux subtracted in 200 components = 0.00401607 Jy ! Clean residual min=-0.007704 max=0.005899 Jy/beam ! Clean residual mean=-0.000297 rms=0.002350 Jy/beam ! Combined flux in latest and established models = 0.374832 Jy ! Adding 4 model components to the UV plane model. ! The established model now contains 31 components and 0.374832 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.031 mas, bmaj=8.505 mas, bpa=-6.35 degrees ! Estimated noise=2.08932 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0023167 Jy ! Component: 100 - total flux cleaned = -0.0020957 Jy ! Component: 150 - total flux cleaned = -0.00189881 Jy ! Component: 200 - total flux cleaned = -0.00171028 Jy ! Total flux subtracted in 200 components = -0.00171028 Jy ! Clean residual min=-0.008358 max=0.006983 Jy/beam ! Clean residual mean=-0.000172 rms=0.002149 Jy/beam ! Combined flux in latest and established models = 0.373122 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.373122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116303Jy sigma=1.015096 ! Fit after self-cal, rms=0.116376Jy sigma=1.014795 wmodel J1252-3319_S_2004_04_30_yyk\_map.mod ! Writing 37 model components to file: J1252-3319_S_2004_04_30_yyk_map.mod wobs J1252-3319_S_2004_04_30_yyk\_uvs.fits ! Writing UV FITS file: J1252-3319_S_2004_04_30_yyk_uvs.fits wwins J1252-3319_S_2004_04_30_yyk\_map.win ! wwins: Wrote 1 windows to J1252-3319_S_2004_04_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0030277 Jy ! Component: 100 - total flux cleaned = -0.00538398 Jy ! Component: 150 - total flux cleaned = -0.00790756 Jy ! Component: 200 - total flux cleaned = -0.00962346 Jy ! Component: 250 - total flux cleaned = -0.0110511 Jy ! Component: 300 - total flux cleaned = -0.012414 Jy ! Component: 350 - total flux cleaned = -0.0132522 Jy ! Component: 400 - total flux cleaned = -0.013881 Jy ! Component: 450 - total flux cleaned = -0.014229 Jy ! Component: 500 - total flux cleaned = -0.0143994 Jy ! Component: 550 - total flux cleaned = -0.0146421 Jy ! Component: 600 - total flux cleaned = -0.0148802 Jy ! Component: 650 - total flux cleaned = -0.0152668 Jy ! Component: 700 - total flux cleaned = -0.0157169 Jy ! Component: 750 - total flux cleaned = -0.0159358 Jy ! Component: 800 - total flux cleaned = -0.0162182 Jy ! Component: 850 - total flux cleaned = -0.0164941 Jy ! Component: 900 - total flux cleaned = -0.0165628 Jy ! Component: 950 - total flux cleaned = -0.0168255 Jy ! Component: 1000 - total flux cleaned = -0.0168239 Jy ! Component: 1050 - total flux cleaned = -0.017011 Jy ! Component: 1100 - total flux cleaned = -0.0170103 Jy ! Component: 1150 - total flux cleaned = -0.0171319 Jy ! Component: 1200 - total flux cleaned = -0.017309 Jy ! Component: 1250 - total flux cleaned = -0.0174236 Jy ! Component: 1300 - total flux cleaned = -0.0175919 Jy ! Component: 1350 - total flux cleaned = -0.0176463 Jy ! Component: 1400 - total flux cleaned = -0.017809 Jy ! Component: 1450 - total flux cleaned = -0.0180734 Jy ! Component: 1500 - total flux cleaned = -0.0182283 Jy ! Component: 1550 - total flux cleaned = -0.0183817 Jy ! Component: 1600 - total flux cleaned = -0.0186807 Jy ! Component: 1650 - total flux cleaned = -0.0187772 Jy ! Component: 1700 - total flux cleaned = -0.0188258 Jy ! Component: 1750 - total flux cleaned = -0.018968 Jy ! Component: 1800 - total flux cleaned = -0.0191539 Jy ! Component: 1850 - total flux cleaned = -0.0192906 Jy ! Component: 1900 - total flux cleaned = -0.0193809 Jy ! Component: 1950 - total flux cleaned = -0.0197794 Jy ! Component: 2000 - total flux cleaned = -0.0198658 Jy ! Total flux subtracted in 2048 components = -0.0199949 Jy ! Clean residual min=-0.002494 max=0.002636 Jy/beam ! Clean residual mean=-0.000073 rms=0.000883 Jy/beam ! Combined flux in latest and established models = 0.353127 Jy keep ! Adding 145 model components to the UV plane model. ! The established model now contains 182 components and 0.353127 Jy ![Exited script file: muppet] wmap "J1252-3319_S_2004_04_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.031 x 8.505 at -6.35 degrees (North through East) ! Clean map min=-0.0083247 max=0.32422 Jy/beam ! Writing clean map to FITS file: J1252-3319_S_2004_04_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.324223 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000889742 device "J1252-3319_S_2004_04_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J1252-3319_S_2004_04_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.82327 0.82327 1.64654 3.29308 6.58616 13.1723 26.3446 52.6893 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0026 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.324 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.031 x 8.505 at -6.35 degrees (North through East) ! Clean map min=-0.0083247 max=0.32422 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1252-3319_S_2004_04_30_yyk\_map.gif/gif" ! Attempting to open device: 'J1252-3319_S_2004_04_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1252-3319_S_2004_04_30_yyk_uvs.log closed on Wed Dec 7 00:24:42 2005