! Started logfile: J1215-1731_S_2004_05_08_yyk_uvs.log on Wed Dec 7 00:21:51 2005 obs J1215-1731_S_2004_05_08_yyk_uve.fits ! Reading UV FITS file: J1215-1731_S_2004_05_08_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.9 visibilities/baseline/integration-bin. ! Found source: J1215-1731 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1432 lines of history. ! ! Reading 648 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1215-1731_S_2004_05_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.968631 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.157372Jy sigma=2.573120 ! Fit after self-cal, rms=0.157153Jy sigma=2.561087 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.554 mas, bmaj=6.621 mas, bpa=-1.025 degrees ! Estimated noise=2.44694 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.820528 Jy ! Component: 100 - total flux cleaned = 0.94964 Jy ! Total flux subtracted in 100 components = 0.94964 Jy ! Clean residual min=-0.030270 max=0.044725 Jy/beam ! Clean residual mean=0.000374 rms=0.009617 Jy/beam ! Combined flux in latest and established models = 0.94964 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.94964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140390Jy sigma=2.247916 ! Fit after self-cal, rms=0.139996Jy sigma=2.241881 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.942 mas, bmaj=7.674 mas, bpa=-0.5291 degrees ! Estimated noise=1.78774 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0493032 Jy ! Component: 100 - total flux cleaned = 0.0698064 Jy ! Component: 150 - total flux cleaned = 0.0779806 Jy ! Component: 200 - total flux cleaned = 0.0785261 Jy ! Total flux subtracted in 200 components = 0.0785261 Jy ! Clean residual min=-0.027141 max=0.055873 Jy/beam ! Clean residual mean=0.000680 rms=0.010341 Jy/beam ! Combined flux in latest and established models = 1.02817 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 33 components and 1.02817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126395Jy sigma=2.038005 ! Fit after self-cal, rms=0.126098Jy sigma=2.034758 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01586 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.05 HN 0.95 KP 0.93 ! LA 1.04 MK 0.97 NL 1.00 OV 0.99 ! PT 0.98 SC 0.93 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.994366 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 HN 1.04 KP 0.96 ! LA 1.01 MK 1.04 NL 1.02 OV 1.03 ! PT 0.92 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.0165 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.91 HN 0.95 KP 0.89 ! LA 1.00* MK 1.02 NL 0.98 OV 1.00* ! PT 0.96 SC 1.09 ! ! ! Fit before self-cal, rms=0.126098Jy sigma=2.034758 ! Fit after self-cal, rms=0.117410Jy sigma=1.895940 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117410Jy sigma=1.895940 ! Fit after self-cal, rms=0.117429Jy sigma=1.895802 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.954 mas, bmaj=7.702 mas, bpa=-0.2679 degrees ! Estimated noise=1.79481 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8.5, -4.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0546712 Jy ! Component: 100 - total flux cleaned = 0.0768415 Jy ! Component: 150 - total flux cleaned = 0.0894551 Jy ! Component: 200 - total flux cleaned = 0.095089 Jy ! Total flux subtracted in 200 components = 0.095089 Jy ! Clean residual min=-0.016432 max=0.018066 Jy/beam ! Clean residual mean=0.000281 rms=0.004763 Jy/beam ! Combined flux in latest and established models = 1.12325 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 46 model components to the UV plane model. ! The established model now contains 77 components and 1.12325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101803Jy sigma=1.568592 ! Fit after self-cal, rms=0.100640Jy sigma=1.551750 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100640Jy sigma=1.551750 ! Fit after self-cal, rms=0.099542Jy sigma=1.529750 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.010969 Jy ! Component: 100 - total flux cleaned = 0.0147535 Jy ! Component: 150 - total flux cleaned = 0.0169025 Jy ! Component: 200 - total flux cleaned = 0.018081 Jy ! Total flux subtracted in 200 components = 0.018081 Jy ! Clean residual min=-0.013999 max=0.016435 Jy/beam ! Clean residual mean=0.000192 rms=0.004056 Jy/beam ! Combined flux in latest and established models = 1.14134 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 97 components and 1.14134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098268Jy sigma=1.504677 ! Fit after self-cal, rms=0.098146Jy sigma=1.502118 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.954 x 7.702 at -0.2679 degrees (North through East) ! Clean map min=-0.01352 max=0.94953 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098146Jy sigma=1.502118 ! Fit after self-cal, rms=0.075875Jy sigma=1.136955 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075875Jy sigma=1.136955 ! Fit after self-cal, rms=0.075888Jy sigma=1.136800 ! Inverting map and beam ! Estimated beam: bmin=2.949 mas, bmaj=7.73 mas, bpa=-0.2073 degrees ! Estimated noise=1.78631 mJy/beam. ! Added new window around map position (17.5, -15.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146807 Jy ! Component: 100 - total flux cleaned = 0.0210114 Jy ! Component: 150 - total flux cleaned = 0.0253803 Jy ! Component: 200 - total flux cleaned = 0.0286899 Jy ! Total flux subtracted in 200 components = 0.0286899 Jy ! Clean residual min=-0.008088 max=0.007021 Jy/beam ! Clean residual mean=0.000127 rms=0.002192 Jy/beam ! Combined flux in latest and established models = 1.17003 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 128 components and 1.17003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073383Jy sigma=1.092354 ! Fit after self-cal, rms=0.073278Jy sigma=1.091163 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073278Jy sigma=1.091163 ! Fit after self-cal, rms=0.065413Jy sigma=0.986623 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065413Jy sigma=0.986623 ! Fit after self-cal, rms=0.065414Jy sigma=0.986605 ! Inverting map and beam ! Estimated beam: bmin=2.95 mas, bmaj=7.743 mas, bpa=-0.29 degrees ! Estimated noise=1.78522 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00312469 Jy ! Component: 100 - total flux cleaned = 0.00554264 Jy ! Component: 150 - total flux cleaned = 0.00674181 Jy ! Component: 200 - total flux cleaned = 0.00767575 Jy ! Total flux subtracted in 200 components = 0.00767575 Jy ! Clean residual min=-0.007756 max=0.006827 Jy/beam ! Clean residual mean=0.000095 rms=0.001920 Jy/beam ! Combined flux in latest and established models = 1.1777 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 153 components and 1.1777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064814Jy sigma=0.975636 ! Fit after self-cal, rms=0.064767Jy sigma=0.975266 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.122 mas, bmaj=16.35 mas, bpa=7.349 degrees ! Estimated noise=2.32845 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00379065 Jy ! Component: 100 - total flux cleaned = 0.00551455 Jy ! Component: 150 - total flux cleaned = 0.00619776 Jy ! Component: 200 - total flux cleaned = 0.0067793 Jy ! Total flux subtracted in 200 components = 0.0067793 Jy ! Clean residual min=-0.010452 max=0.009194 Jy/beam ! Clean residual mean=0.000136 rms=0.002848 Jy/beam ! Combined flux in latest and established models = 1.18448 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 167 components and 1.18448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064548Jy sigma=0.972414 ! Fit after self-cal, rms=0.064490Jy sigma=0.971959 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.556 mas, bmaj=6.64 mas, bpa=-0.7689 degrees ! Estimated noise=2.43135 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.8153 Jy ! Component: 100 - total flux cleaned = 0.950318 Jy ! Component: 150 - total flux cleaned = 1.0074 Jy ! Component: 200 - total flux cleaned = 1.04259 Jy ! Total flux subtracted in 200 components = 1.04259 Jy ! Clean residual min=-0.012141 max=0.015602 Jy/beam ! Clean residual mean=0.000320 rms=0.004476 Jy/beam ! Combined flux in latest and established models = 1.04259 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 1.04259 Jy ! Inverting map and beam ! Estimated beam: bmin=2.95 mas, bmaj=7.743 mas, bpa=-0.29 degrees ! Estimated noise=1.78522 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0326921 Jy ! Component: 100 - total flux cleaned = 0.0546148 Jy ! Component: 150 - total flux cleaned = 0.0713608 Jy ! Component: 200 - total flux cleaned = 0.0845311 Jy ! Total flux subtracted in 200 components = 0.0845311 Jy ! Clean residual min=-0.008639 max=0.009866 Jy/beam ! Clean residual mean=0.000338 rms=0.002844 Jy/beam ! Combined flux in latest and established models = 1.12713 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 97 components and 1.12713 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.122 mas, bmaj=16.35 mas, bpa=7.349 degrees ! Estimated noise=2.32845 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0185408 Jy ! Component: 100 - total flux cleaned = 0.0304221 Jy ! Component: 150 - total flux cleaned = 0.0387758 Jy ! Component: 200 - total flux cleaned = 0.0448411 Jy ! Total flux subtracted in 200 components = 0.0448411 Jy ! Clean residual min=-0.010539 max=0.009523 Jy/beam ! Clean residual mean=0.000266 rms=0.003052 Jy/beam ! Combined flux in latest and established models = 1.17197 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 150 components and 1.17197 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.95 mas, bmaj=7.743 mas, bpa=-0.29 degrees ! Estimated noise=1.78522 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00383536 Jy ! Component: 100 - total flux cleaned = 0.00580294 Jy ! Component: 150 - total flux cleaned = 0.00732516 Jy ! Component: 200 - total flux cleaned = 0.00812769 Jy ! Total flux subtracted in 200 components = 0.00812769 Jy ! Clean residual min=-0.006939 max=0.006983 Jy/beam ! Clean residual mean=0.000087 rms=0.001897 Jy/beam ! Combined flux in latest and established models = 1.18009 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 174 components and 1.18009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064361Jy sigma=0.970921 ! Fit after self-cal, rms=0.064284Jy sigma=0.969788 wmodel J1215-1731_S_2004_05_08_yyk\_map.mod ! Writing 174 model components to file: J1215-1731_S_2004_05_08_yyk_map.mod wobs J1215-1731_S_2004_05_08_yyk\_uvs.fits ! Writing UV FITS file: J1215-1731_S_2004_05_08_yyk_uvs.fits wwins J1215-1731_S_2004_05_08_yyk\_map.win ! wwins: Wrote 3 windows to J1215-1731_S_2004_05_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000340939 Jy ! Component: 100 - total flux cleaned = 0.00131643 Jy ! Component: 150 - total flux cleaned = 0.00213005 Jy ! Component: 200 - total flux cleaned = 0.00261118 Jy ! Component: 250 - total flux cleaned = 0.00315608 Jy ! Component: 300 - total flux cleaned = 0.00350096 Jy ! Component: 350 - total flux cleaned = 0.00391324 Jy ! Component: 400 - total flux cleaned = 0.00414776 Jy ! Component: 450 - total flux cleaned = 0.00429654 Jy ! Component: 500 - total flux cleaned = 0.00422406 Jy ! Component: 550 - total flux cleaned = 0.0046503 Jy ! Component: 600 - total flux cleaned = 0.00472025 Jy ! Component: 650 - total flux cleaned = 0.00478779 Jy ! Component: 700 - total flux cleaned = 0.00485356 Jy ! Component: 750 - total flux cleaned = 0.00497798 Jy ! Component: 800 - total flux cleaned = 0.00503778 Jy ! Component: 850 - total flux cleaned = 0.00527362 Jy ! Component: 900 - total flux cleaned = 0.00527351 Jy ! Component: 950 - total flux cleaned = 0.00516243 Jy ! Component: 1000 - total flux cleaned = 0.00505363 Jy ! Component: 1050 - total flux cleaned = 0.00494835 Jy ! Component: 1100 - total flux cleaned = 0.00479239 Jy ! Component: 1150 - total flux cleaned = 0.00459037 Jy ! Component: 1200 - total flux cleaned = 0.00444158 Jy ! Component: 1250 - total flux cleaned = 0.00424791 Jy ! Component: 1300 - total flux cleaned = 0.0041055 Jy ! Component: 1350 - total flux cleaned = 0.00391941 Jy ! Component: 1400 - total flux cleaned = 0.0036912 Jy ! Component: 1450 - total flux cleaned = 0.00355645 Jy ! Component: 1500 - total flux cleaned = 0.00329269 Jy ! Component: 1550 - total flux cleaned = 0.00329286 Jy ! Component: 1600 - total flux cleaned = 0.00308186 Jy ! Component: 1650 - total flux cleaned = 0.00299897 Jy ! Component: 1700 - total flux cleaned = 0.00283731 Jy ! Component: 1750 - total flux cleaned = 0.00283842 Jy ! Component: 1800 - total flux cleaned = 0.00283891 Jy ! Component: 1850 - total flux cleaned = 0.00264715 Jy ! Component: 1900 - total flux cleaned = 0.00257213 Jy ! Component: 1950 - total flux cleaned = 0.00253539 Jy ! Component: 2000 - total flux cleaned = 0.0024633 Jy ! Total flux subtracted in 2048 components = 0.00267943 Jy ! Clean residual min=-0.002911 max=0.002120 Jy/beam ! Clean residual mean=0.000020 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 1.18277 Jy keep ! Adding 142 model components to the UV plane model. ! The established model now contains 316 components and 1.18277 Jy ![Exited script file: muppet] wmap "J1215-1731_S_2004_05_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.95 x 7.743 at -0.29 degrees (North through East) ! Clean map min=-0.0047808 max=0.95206 Jy/beam ! Writing clean map to FITS file: J1215-1731_S_2004_05_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.95206 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000735431 device "J1215-1731_S_2004_05_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J1215-1731_S_2004_05_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.231739 0.231739 0.463478 0.926955 1.85391 3.70782 7.41564 14.8313 29.6626 59.3251 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.952 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.95 x 7.743 at -0.29 degrees (North through East) ! Clean map min=-0.0047808 max=0.95206 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1215-1731_S_2004_05_08_yyk\_map.gif/gif" ! Attempting to open device: 'J1215-1731_S_2004_05_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1215-1731_S_2004_05_08_yyk_uvs.log closed on Wed Dec 7 00:21:55 2005