! Started logfile: J1209-4016_X_2004_05_08_yyk_uvs.log on Wed Dec 7 00:21:43 2005 obs J1209-4016_X_2004_05_08_yyk_uve.fits ! Reading UV FITS file: J1209-4016_X_2004_05_08_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.497778 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1209-4016 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1434 lines of history. ! ! Reading 896 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1209-4016_X_2004_05_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.165851 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.855288Jy sigma=14.889856 ! Fit after self-cal, rms=0.855137Jy sigma=14.894499 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5545 mas, bmaj=1.807 mas, bpa=-2.993 degrees ! Estimated noise=2.45414 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.119097 Jy ! Component: 100 - total flux cleaned = 0.142319 Jy ! Total flux subtracted in 100 components = 0.142319 Jy ! Clean residual min=-0.012942 max=0.016396 Jy/beam ! Clean residual mean=-0.000110 rms=0.003457 Jy/beam ! Combined flux in latest and established models = 0.142319 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.142319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073091Jy sigma=1.214588 ! Fit after self-cal, rms=0.073052Jy sigma=1.213973 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7586 mas, bmaj=2.093 mas, bpa=-1.772 degrees ! Estimated noise=1.39378 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0234328 Jy ! Component: 100 - total flux cleaned = 0.0315519 Jy ! Component: 150 - total flux cleaned = 0.0344118 Jy ! Component: 200 - total flux cleaned = 0.0352013 Jy ! Total flux subtracted in 200 components = 0.0352013 Jy ! Clean residual min=-0.010093 max=0.020921 Jy/beam ! Clean residual mean=-0.000097 rms=0.003926 Jy/beam ! Combined flux in latest and established models = 0.177521 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 24 components and 0.177521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069169Jy sigma=1.125949 ! Fit after self-cal, rms=0.069109Jy sigma=1.125098 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00392 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 0.91 ! LA 0.95 MK 0.96 NL 1.00* OV 1.18 ! PT 0.95 SC 1.00 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00964 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.00* KP 0.89 ! LA 0.97 MK 0.99 NL 1.00* OV 1.14 ! PT 0.96 SC 1.02 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.988071 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 0.97 ! LA 0.94 MK 0.95 NL 1.00* OV 1.20 ! PT 1.10 SC 0.93 ! ! ! Fit before self-cal, rms=0.069109Jy sigma=1.125098 ! Fit after self-cal, rms=0.068202Jy sigma=1.093184 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068202Jy sigma=1.093184 ! Fit after self-cal, rms=0.068194Jy sigma=1.092649 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7521 mas, bmaj=2.077 mas, bpa=-2.275 degrees ! Estimated noise=1.37638 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.8, -3.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0181491 Jy ! Component: 100 - total flux cleaned = 0.0232867 Jy ! Component: 150 - total flux cleaned = 0.0251561 Jy ! Component: 200 - total flux cleaned = 0.0256005 Jy ! Total flux subtracted in 200 components = 0.0256005 Jy ! Clean residual min=-0.005632 max=0.006324 Jy/beam ! Clean residual mean=0.000020 rms=0.001824 Jy/beam ! Combined flux in latest and established models = 0.203121 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 49 components and 0.203121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064702Jy sigma=1.028337 ! Fit after self-cal, rms=0.064519Jy sigma=1.024640 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064519Jy sigma=1.024640 ! Fit after self-cal, rms=0.061443Jy sigma=0.963553 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00302266 Jy ! Component: 100 - total flux cleaned = 0.00316364 Jy ! Component: 150 - total flux cleaned = 0.00327681 Jy ! Component: 200 - total flux cleaned = 0.00332232 Jy ! Total flux subtracted in 200 components = 0.00332232 Jy ! Clean residual min=-0.005182 max=0.005433 Jy/beam ! Clean residual mean=0.000028 rms=0.001592 Jy/beam ! Combined flux in latest and established models = 0.206444 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 68 components and 0.206444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061254Jy sigma=0.960663 ! Fit after self-cal, rms=0.061103Jy sigma=0.956923 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7521 x 2.077 at -2.275 degrees (North through East) ! Clean map min=-0.0044495 max=0.15004 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061103Jy sigma=0.956923 ! Fit after self-cal, rms=0.060247Jy sigma=0.945482 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060247Jy sigma=0.945482 ! Fit after self-cal, rms=0.060230Jy sigma=0.945073 ! Inverting map and beam ! Estimated beam: bmin=0.7484 mas, bmaj=2.074 mas, bpa=-2.108 degrees ! Estimated noise=1.37672 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00388779 Jy ! Component: 100 - total flux cleaned = 0.00527278 Jy ! Component: 150 - total flux cleaned = 0.00576719 Jy ! Component: 200 - total flux cleaned = 0.00609277 Jy ! Total flux subtracted in 200 components = 0.00609277 Jy ! Clean residual min=-0.004292 max=0.003934 Jy/beam ! Clean residual mean=0.000012 rms=0.001224 Jy/beam ! Combined flux in latest and established models = 0.212536 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 83 components and 0.212536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060058Jy sigma=0.941422 ! Fit after self-cal, rms=0.060033Jy sigma=0.940820 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060033Jy sigma=0.940820 ! Fit after self-cal, rms=0.059754Jy sigma=0.930547 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059754Jy sigma=0.930547 ! Fit after self-cal, rms=0.059773Jy sigma=0.930339 ! Inverting map and beam ! Estimated beam: bmin=0.7378 mas, bmaj=2.054 mas, bpa=-2.634 degrees ! Estimated noise=1.37016 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00290397 Jy ! Component: 100 - total flux cleaned = 0.00388834 Jy ! Component: 150 - total flux cleaned = 0.00398651 Jy ! Component: 200 - total flux cleaned = 0.00411451 Jy ! Total flux subtracted in 200 components = 0.00411451 Jy ! Clean residual min=-0.003580 max=0.003964 Jy/beam ! Clean residual mean=0.000028 rms=0.001058 Jy/beam ! Combined flux in latest and established models = 0.216651 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 99 components and 0.216651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059641Jy sigma=0.927950 ! Fit after self-cal, rms=0.059631Jy sigma=0.927676 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.116 mas, bmaj=10.26 mas, bpa=-0.7507 degrees ! Estimated noise=1.91273 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126922 Jy ! Component: 100 - total flux cleaned = 0.00122449 Jy ! Component: 150 - total flux cleaned = 0.00122446 Jy ! Component: 200 - total flux cleaned = 0.00123889 Jy ! Total flux subtracted in 200 components = 0.00123889 Jy ! Clean residual min=-0.003535 max=0.003639 Jy/beam ! Clean residual mean=0.000066 rms=0.001368 Jy/beam ! Combined flux in latest and established models = 0.21789 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 103 components and 0.21789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059625Jy sigma=0.927445 ! Fit after self-cal, rms=0.059618Jy sigma=0.927351 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5483 mas, bmaj=1.794 mas, bpa=-3.405 degrees ! Estimated noise=2.37764 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.117025 Jy ! Component: 100 - total flux cleaned = 0.143281 Jy ! Component: 150 - total flux cleaned = 0.159764 Jy ! Component: 200 - total flux cleaned = 0.172014 Jy ! Total flux subtracted in 200 components = 0.172014 Jy ! Clean residual min=-0.006617 max=0.007741 Jy/beam ! Clean residual mean=-0.000056 rms=0.002028 Jy/beam ! Combined flux in latest and established models = 0.172014 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.172014 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7378 mas, bmaj=2.054 mas, bpa=-2.634 degrees ! Estimated noise=1.37016 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, -0.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0178829 Jy ! Component: 100 - total flux cleaned = 0.028002 Jy ! Component: 150 - total flux cleaned = 0.0345383 Jy ! Component: 200 - total flux cleaned = 0.0388246 Jy ! Total flux subtracted in 200 components = 0.0388246 Jy ! Clean residual min=-0.003727 max=0.003804 Jy/beam ! Clean residual mean=0.000005 rms=0.001104 Jy/beam ! Combined flux in latest and established models = 0.210839 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 91 components and 0.210839 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.116 mas, bmaj=10.26 mas, bpa=-0.7507 degrees ! Estimated noise=1.91273 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0047649 Jy ! Component: 100 - total flux cleaned = 0.00677733 Jy ! Component: 150 - total flux cleaned = 0.0076475 Jy ! Component: 200 - total flux cleaned = 0.00773241 Jy ! Total flux subtracted in 200 components = 0.00773241 Jy ! Clean residual min=-0.003457 max=0.003475 Jy/beam ! Clean residual mean=0.000067 rms=0.001295 Jy/beam ! Combined flux in latest and established models = 0.218571 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 109 components and 0.218571 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7378 mas, bmaj=2.054 mas, bpa=-2.634 degrees ! Estimated noise=1.37016 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000661483 Jy ! Component: 100 - total flux cleaned = -0.0006097 Jy ! Component: 150 - total flux cleaned = -0.000517007 Jy ! Component: 200 - total flux cleaned = -0.000407084 Jy ! Total flux subtracted in 200 components = -0.000407084 Jy ! Clean residual min=-0.003322 max=0.003560 Jy/beam ! Clean residual mean=0.000031 rms=0.000961 Jy/beam ! Combined flux in latest and established models = 0.218164 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 118 components and 0.218164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059529Jy sigma=0.925864 ! Fit after self-cal, rms=0.059512Jy sigma=0.925669 wmodel J1209-4016_X_2004_05_08_yyk\_map.mod ! Writing 118 model components to file: J1209-4016_X_2004_05_08_yyk_map.mod wobs J1209-4016_X_2004_05_08_yyk\_uvs.fits ! Writing UV FITS file: J1209-4016_X_2004_05_08_yyk_uvs.fits wwins J1209-4016_X_2004_05_08_yyk\_map.win ! wwins: Wrote 3 windows to J1209-4016_X_2004_05_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000372901 Jy ! Component: 100 - total flux cleaned = 0.000424129 Jy ! Component: 150 - total flux cleaned = 0.000198793 Jy ! Component: 200 - total flux cleaned = -0.000128884 Jy ! Component: 250 - total flux cleaned = -0.000472773 Jy ! Component: 300 - total flux cleaned = -0.000760665 Jy ! Component: 350 - total flux cleaned = -0.00106748 Jy ! Component: 400 - total flux cleaned = -0.00142482 Jy ! Component: 450 - total flux cleaned = -0.00176778 Jy ! Component: 500 - total flux cleaned = -0.00212915 Jy ! Component: 550 - total flux cleaned = -0.00247899 Jy ! Component: 600 - total flux cleaned = -0.00287328 Jy ! Component: 650 - total flux cleaned = -0.00314619 Jy ! Component: 700 - total flux cleaned = -0.00349169 Jy ! Component: 750 - total flux cleaned = -0.00369934 Jy ! Component: 800 - total flux cleaned = -0.00395309 Jy ! Component: 850 - total flux cleaned = -0.00417667 Jy ! Component: 900 - total flux cleaned = -0.00437131 Jy ! Component: 950 - total flux cleaned = -0.00463358 Jy ! Component: 1000 - total flux cleaned = -0.00475075 Jy ! Component: 1050 - total flux cleaned = -0.00488903 Jy ! Component: 1100 - total flux cleaned = -0.00504743 Jy ! Component: 1150 - total flux cleaned = -0.00518145 Jy ! Component: 1200 - total flux cleaned = -0.00535728 Jy ! Component: 1250 - total flux cleaned = -0.00544402 Jy ! Component: 1300 - total flux cleaned = -0.00561498 Jy ! Component: 1350 - total flux cleaned = -0.00567796 Jy ! Component: 1400 - total flux cleaned = -0.00569905 Jy ! Component: 1450 - total flux cleaned = -0.00582378 Jy ! Component: 1500 - total flux cleaned = -0.00590654 Jy ! Component: 1550 - total flux cleaned = -0.00603053 Jy ! Component: 1600 - total flux cleaned = -0.00615406 Jy ! Component: 1650 - total flux cleaned = -0.00631859 Jy ! Component: 1700 - total flux cleaned = -0.00646226 Jy ! Component: 1750 - total flux cleaned = -0.00656487 Jy ! Component: 1800 - total flux cleaned = -0.00670832 Jy ! Component: 1850 - total flux cleaned = -0.00681083 Jy ! Component: 1900 - total flux cleaned = -0.00701566 Jy ! Component: 1950 - total flux cleaned = -0.00715906 Jy ! Component: 2000 - total flux cleaned = -0.00728202 Jy ! Total flux subtracted in 2048 components = -0.00738464 Jy ! Clean residual min=-0.001272 max=0.001151 Jy/beam ! Clean residual mean=0.000003 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.210779 Jy keep ! Adding 110 model components to the UV plane model. ! The established model now contains 228 components and 0.210779 Jy ![Exited script file: muppet] wmap "J1209-4016_X_2004_05_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7378 x 2.054 at -2.634 degrees (North through East) ! Clean map min=-0.0026456 max=0.14501 Jy/beam ! Writing clean map to FITS file: J1209-4016_X_2004_05_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.145007 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000371654 device "J1209-4016_X_2004_05_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J1209-4016_X_2004_05_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.768901 0.768901 1.5378 3.07561 6.15121 12.3024 24.6048 49.2097 98.4194 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.145 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7378 x 2.054 at -2.634 degrees (North through East) ! Clean map min=-0.0026456 max=0.14501 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1209-4016_X_2004_05_08_yyk\_map.gif/gif" ! Attempting to open device: 'J1209-4016_X_2004_05_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1209-4016_X_2004_05_08_yyk_uvs.log closed on Wed Dec 7 00:21:47 2005