! Started logfile: J1209-4016_S_2004_05_08_yyk_uvs.log on Wed Dec 7 00:21:38 2005 obs J1209-4016_S_2004_05_08_yyk_uve.fits ! Reading UV FITS file: J1209-4016_S_2004_05_08_yyk_uve.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.622222 visibilities/baseline/integration-bin. ! Found source: J1209-4016 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1434 lines of history. ! ! Reading 1120 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1209-4016_S_2004_05_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.291754 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.759273Jy sigma=9.982740 ! Fit after self-cal, rms=0.763666Jy sigma=9.972397 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.409 mas, bmaj=6.686 mas, bpa=-3.443 degrees ! Estimated noise=3.17093 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0.5). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.201606 Jy ! Component: 100 - total flux cleaned = 0.273253 Jy ! Total flux subtracted in 100 components = 0.273253 Jy ! Clean residual min=-0.018540 max=0.026506 Jy/beam ! Clean residual mean=0.000039 rms=0.007423 Jy/beam ! Combined flux in latest and established models = 0.273253 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.273253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113564Jy sigma=1.496857 ! Fit after self-cal, rms=0.114137Jy sigma=1.486946 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.427 mas, bmaj=9.446 mas, bpa=3.482 degrees ! Estimated noise=1.72874 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0579969 Jy ! Component: 100 - total flux cleaned = 0.0770408 Jy ! Component: 150 - total flux cleaned = 0.0828309 Jy ! Component: 200 - total flux cleaned = 0.0833282 Jy ! Total flux subtracted in 200 components = 0.0833282 Jy ! Clean residual min=-0.013042 max=0.015967 Jy/beam ! Clean residual mean=-0.000433 rms=0.004597 Jy/beam ! Combined flux in latest and established models = 0.356581 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 47 components and 0.356581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100191Jy sigma=1.209049 ! Fit after self-cal, rms=0.100491Jy sigma=1.206545 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.100491Jy sigma=1.206545 ! Fit after self-cal, rms=0.100491Jy sigma=1.206545 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100491Jy sigma=1.206545 ! Fit after self-cal, rms=0.100551Jy sigma=1.204722 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.427 mas, bmaj=9.446 mas, bpa=3.482 degrees ! Estimated noise=1.72874 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000386617 Jy ! Component: 100 - total flux cleaned = 0.000717871 Jy ! Component: 150 - total flux cleaned = 0.00102935 Jy ! Component: 200 - total flux cleaned = 0.00145972 Jy ! Total flux subtracted in 200 components = 0.00145972 Jy ! Clean residual min=-0.012376 max=0.014875 Jy/beam ! Clean residual mean=-0.000433 rms=0.004438 Jy/beam ! Combined flux in latest and established models = 0.358041 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 49 components and 0.358041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099906Jy sigma=1.199788 ! Fit after self-cal, rms=0.100286Jy sigma=1.198151 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100286Jy sigma=1.198151 ! Fit after self-cal, rms=0.095865Jy sigma=1.115727 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000831521 Jy ! Component: 100 - total flux cleaned = 0.000845567 Jy ! Component: 150 - total flux cleaned = 0.00137838 Jy ! Component: 200 - total flux cleaned = 0.00183767 Jy ! Total flux subtracted in 200 components = 0.00183767 Jy ! Clean residual min=-0.010646 max=0.015084 Jy/beam ! Clean residual mean=-0.000433 rms=0.004199 Jy/beam ! Combined flux in latest and established models = 0.359878 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 55 components and 0.359878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095393Jy sigma=1.097089 ! Fit after self-cal, rms=0.095191Jy sigma=1.092084 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.427 x 9.446 at 3.482 degrees (North through East) ! Clean map min=-0.01102 max=0.23406 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095191Jy sigma=1.092084 ! Fit after self-cal, rms=0.094438Jy sigma=1.067899 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094438Jy sigma=1.067899 ! Fit after self-cal, rms=0.094481Jy sigma=1.067245 ! Inverting map and beam ! Estimated beam: bmin=3.322 mas, bmaj=9.164 mas, bpa=3.312 degrees ! Estimated noise=1.71702 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00380188 Jy ! Component: 100 - total flux cleaned = 0.00398093 Jy ! Component: 150 - total flux cleaned = 0.00425301 Jy ! Component: 200 - total flux cleaned = 0.00438116 Jy ! Total flux subtracted in 200 components = 0.00438116 Jy ! Clean residual min=-0.009546 max=0.010865 Jy/beam ! Clean residual mean=-0.000146 rms=0.003183 Jy/beam ! Combined flux in latest and established models = 0.364259 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 61 components and 0.364259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094736Jy sigma=1.059441 ! Fit after self-cal, rms=0.094751Jy sigma=1.059074 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094751Jy sigma=1.059074 ! Fit after self-cal, rms=0.096706Jy sigma=1.053356 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096706Jy sigma=1.053356 ! Fit after self-cal, rms=0.096741Jy sigma=1.053257 ! Inverting map and beam ! Estimated beam: bmin=3.334 mas, bmaj=9.396 mas, bpa=4.653 degrees ! Estimated noise=1.73863 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00386619 Jy ! Component: 100 - total flux cleaned = 0.00410576 Jy ! Component: 150 - total flux cleaned = 0.00421049 Jy ! Component: 200 - total flux cleaned = 0.00440175 Jy ! Total flux subtracted in 200 components = 0.00440175 Jy ! Clean residual min=-0.009601 max=0.010258 Jy/beam ! Clean residual mean=-0.000164 rms=0.003219 Jy/beam ! Combined flux in latest and established models = 0.368661 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 63 components and 0.368661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096979Jy sigma=1.049168 ! Fit after self-cal, rms=0.096990Jy sigma=1.049017 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.568 mas, bmaj=35.46 mas, bpa=1.642 degrees ! Estimated noise=2.16732 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00334255 Jy ! Component: 100 - total flux cleaned = 0.0033389 Jy ! Component: 150 - total flux cleaned = 0.00342968 Jy ! Component: 200 - total flux cleaned = 0.00352279 Jy ! Total flux subtracted in 200 components = 0.00352279 Jy ! Clean residual min=-0.007939 max=0.008448 Jy/beam ! Clean residual mean=-0.000271 rms=0.003423 Jy/beam ! Combined flux in latest and established models = 0.372184 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 69 components and 0.372184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097316Jy sigma=1.050610 ! Fit after self-cal, rms=0.097243Jy sigma=1.049968 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.395 mas, bmaj=6.65 mas, bpa=-2.68 degrees ! Estimated noise=3.16462 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.20341 Jy ! Component: 100 - total flux cleaned = 0.277498 Jy ! Component: 150 - total flux cleaned = 0.316031 Jy ! Component: 200 - total flux cleaned = 0.336875 Jy ! Total flux subtracted in 200 components = 0.336875 Jy ! Clean residual min=-0.012085 max=0.016842 Jy/beam ! Clean residual mean=-0.000001 rms=0.004182 Jy/beam ! Combined flux in latest and established models = 0.336875 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 53 model components to the UV plane model. ! The established model now contains 53 components and 0.336875 Jy ! Inverting map and beam ! Estimated beam: bmin=3.334 mas, bmaj=9.396 mas, bpa=4.653 degrees ! Estimated noise=1.73863 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0204879 Jy ! Component: 100 - total flux cleaned = 0.0268394 Jy ! Component: 150 - total flux cleaned = 0.0272377 Jy ! Component: 200 - total flux cleaned = 0.027487 Jy ! Total flux subtracted in 200 components = 0.027487 Jy ! Clean residual min=-0.010269 max=0.013205 Jy/beam ! Clean residual mean=-0.000167 rms=0.003537 Jy/beam ! Combined flux in latest and established models = 0.364362 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 68 components and 0.364362 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.568 mas, bmaj=35.46 mas, bpa=1.642 degrees ! Estimated noise=2.16732 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00423712 Jy ! Component: 100 - total flux cleaned = 0.00436786 Jy ! Component: 150 - total flux cleaned = 0.00449677 Jy ! Component: 200 - total flux cleaned = 0.00461156 Jy ! Total flux subtracted in 200 components = 0.00461156 Jy ! Clean residual min=-0.008557 max=0.010030 Jy/beam ! Clean residual mean=-0.000270 rms=0.003654 Jy/beam ! Combined flux in latest and established models = 0.368973 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 71 components and 0.368973 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.334 mas, bmaj=9.396 mas, bpa=4.653 degrees ! Estimated noise=1.73863 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00367677 Jy ! Component: 100 - total flux cleaned = -0.00317047 Jy ! Component: 150 - total flux cleaned = -0.00290519 Jy ! Component: 200 - total flux cleaned = -0.00266958 Jy ! Total flux subtracted in 200 components = -0.00266958 Jy ! Clean residual min=-0.010074 max=0.011934 Jy/beam ! Clean residual mean=-0.000164 rms=0.003384 Jy/beam ! Combined flux in latest and established models = 0.366304 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 82 components and 0.366304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098418Jy sigma=1.059545 ! Fit after self-cal, rms=0.098375Jy sigma=1.059320 wmodel J1209-4016_S_2004_05_08_yyk\_map.mod ! Writing 82 model components to file: J1209-4016_S_2004_05_08_yyk_map.mod wobs J1209-4016_S_2004_05_08_yyk\_uvs.fits ! Writing UV FITS file: J1209-4016_S_2004_05_08_yyk_uvs.fits wwins J1209-4016_S_2004_05_08_yyk\_map.win ! wwins: Wrote 1 windows to J1209-4016_S_2004_05_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00371845 Jy ! Component: 100 - total flux cleaned = 0.0064169 Jy ! Component: 150 - total flux cleaned = 0.00873976 Jy ! Component: 200 - total flux cleaned = 0.0101658 Jy ! Component: 250 - total flux cleaned = 0.0116293 Jy ! Component: 300 - total flux cleaned = 0.0125053 Jy ! Component: 350 - total flux cleaned = 0.0127422 Jy ! Component: 400 - total flux cleaned = 0.0126284 Jy ! Component: 450 - total flux cleaned = 0.0126235 Jy ! Component: 500 - total flux cleaned = 0.012523 Jy ! Component: 550 - total flux cleaned = 0.0127177 Jy ! Component: 600 - total flux cleaned = 0.01272 Jy ! Component: 650 - total flux cleaned = 0.0128143 Jy ! Component: 700 - total flux cleaned = 0.0129041 Jy ! Component: 750 - total flux cleaned = 0.0129062 Jy ! Component: 800 - total flux cleaned = 0.0127411 Jy ! Component: 850 - total flux cleaned = 0.0129845 Jy ! Component: 900 - total flux cleaned = 0.0133833 Jy ! Component: 950 - total flux cleaned = 0.013854 Jy ! Component: 1000 - total flux cleaned = 0.0140856 Jy ! Component: 1050 - total flux cleaned = 0.0143148 Jy ! Component: 1100 - total flux cleaned = 0.0143147 Jy ! Component: 1150 - total flux cleaned = 0.0142402 Jy ! Component: 1200 - total flux cleaned = 0.0140928 Jy ! Component: 1250 - total flux cleaned = 0.0140929 Jy ! Component: 1300 - total flux cleaned = 0.0143103 Jy ! Component: 1350 - total flux cleaned = 0.0143818 Jy ! Component: 1400 - total flux cleaned = 0.014454 Jy ! Component: 1450 - total flux cleaned = 0.0146698 Jy ! Component: 1500 - total flux cleaned = 0.0148856 Jy ! Component: 1550 - total flux cleaned = 0.0150298 Jy ! Component: 1600 - total flux cleaned = 0.0152456 Jy ! Component: 1650 - total flux cleaned = 0.0154621 Jy ! Component: 1700 - total flux cleaned = 0.0156803 Jy ! Component: 1750 - total flux cleaned = 0.0158251 Jy ! Component: 1800 - total flux cleaned = 0.0161899 Jy ! Component: 1850 - total flux cleaned = 0.0164096 Jy ! Component: 1900 - total flux cleaned = 0.0166296 Jy ! Component: 1950 - total flux cleaned = 0.0167766 Jy ! Component: 2000 - total flux cleaned = 0.0170738 Jy ! Total flux subtracted in 2048 components = 0.0173726 Jy ! Clean residual min=-0.005532 max=0.005017 Jy/beam ! Clean residual mean=0.000035 rms=0.001435 Jy/beam ! Combined flux in latest and established models = 0.383676 Jy keep ! Adding 118 model components to the UV plane model. ! The established model now contains 200 components and 0.383676 Jy ![Exited script file: muppet] wmap "J1209-4016_S_2004_05_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.334 x 9.396 at 4.653 degrees (North through East) ! Clean map min=-0.010045 max=0.23761 Jy/beam ! Writing clean map to FITS file: J1209-4016_S_2004_05_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.237611 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00131688 device "J1209-4016_S_2004_05_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J1209-4016_S_2004_05_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.66264 1.66264 3.32529 6.65058 13.3012 26.6023 53.2046 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0039 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.237 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.334 x 9.396 at 4.653 degrees (North through East) ! Clean map min=-0.010045 max=0.23761 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1209-4016_S_2004_05_08_yyk\_map.gif/gif" ! Attempting to open device: 'J1209-4016_S_2004_05_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1209-4016_S_2004_05_08_yyk_uvs.log closed on Wed Dec 7 00:21:42 2005