! Started logfile: J1127-1857_X_2004_04_30_yyk_uvs.log on Wed Dec 7 00:20:31 2005 obs J1127-1857_X_2004_04_30_yyk_uve.fits ! Reading UV FITS file: J1127-1857_X_2004_04_30_yyk_uve.fits ! AN table 1: 5 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.924444 visibilities/baseline/integration-bin. ! Found source: J1127-1857 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1546 lines of history. ! ! Reading 832 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1127-1857_X_2004_04_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.46278 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.481619Jy sigma=8.971335 ! Fit after self-cal, rms=0.481541Jy sigma=8.969553 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6698 mas, bmaj=1.796 mas, bpa=-7.331 degrees ! Estimated noise=1.82408 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.23484 Jy ! Component: 100 - total flux cleaned = 1.41749 Jy ! Total flux subtracted in 100 components = 1.41749 Jy ! Clean residual min=-0.032189 max=0.049942 Jy/beam ! Clean residual mean=-0.000143 rms=0.009125 Jy/beam ! Combined flux in latest and established models = 1.41749 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.41749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157526Jy sigma=2.660545 ! Fit after self-cal, rms=0.157514Jy sigma=2.660088 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8205 mas, bmaj=2.109 mas, bpa=-4.393 degrees ! Estimated noise=1.46924 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0850788 Jy ! Component: 100 - total flux cleaned = 0.114141 Jy ! Component: 150 - total flux cleaned = 0.115624 Jy ! Component: 200 - total flux cleaned = 0.115103 Jy ! Total flux subtracted in 200 components = 0.115103 Jy ! Clean residual min=-0.023226 max=0.022355 Jy/beam ! Clean residual mean=0.000178 rms=0.005716 Jy/beam ! Combined flux in latest and established models = 1.53259 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 33 components and 1.53259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121325Jy sigma=1.944785 ! Fit after self-cal, rms=0.121257Jy sigma=1.944170 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00351 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.99 KP 1.01 ! LA 0.99 MK 1.01 NL 1.00 OV 1.01 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01059 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 1.01 KP 0.94 ! LA 0.97 MK 1.00 NL 0.97 OV 0.99 ! PT 1.04 SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00384 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.03 HN 0.91 KP 0.89 ! LA 0.98 MK 1.03 NL 0.96 OV 1.02 ! PT 1.07 SC 1.01 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.982127 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.04 HN 0.96 KP 0.93 ! LA 0.98 MK 1.03 NL 0.99 OV 1.05 ! PT 1.12 SC 1.03 ! ! ! Fit before self-cal, rms=0.121257Jy sigma=1.944170 ! Fit after self-cal, rms=0.086855Jy sigma=1.298232 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086855Jy sigma=1.298232 ! Fit after self-cal, rms=0.086864Jy sigma=1.298198 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8245 mas, bmaj=2.125 mas, bpa=-4.375 degrees ! Estimated noise=1.46623 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0029819 Jy ! Component: 100 - total flux cleaned = 0.00445289 Jy ! Component: 150 - total flux cleaned = 0.00535487 Jy ! Component: 200 - total flux cleaned = 0.00580145 Jy ! Total flux subtracted in 200 components = 0.00580145 Jy ! Clean residual min=-0.007151 max=0.007581 Jy/beam ! Clean residual mean=-0.000007 rms=0.001869 Jy/beam ! Combined flux in latest and established models = 1.53839 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 40 components and 1.53839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086384Jy sigma=1.283195 ! Fit after self-cal, rms=0.086255Jy sigma=1.282308 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086255Jy sigma=1.282308 ! Fit after self-cal, rms=0.074955Jy sigma=1.150105 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000222749 Jy ! Component: 100 - total flux cleaned = 0.000680203 Jy ! Component: 150 - total flux cleaned = 0.000824331 Jy ! Component: 200 - total flux cleaned = 0.000890567 Jy ! Total flux subtracted in 200 components = 0.000890567 Jy ! Clean residual min=-0.006769 max=0.006903 Jy/beam ! Clean residual mean=-0.000007 rms=0.001809 Jy/beam ! Combined flux in latest and established models = 1.53928 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 46 components and 1.53928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074849Jy sigma=1.146658 ! Fit after self-cal, rms=0.073797Jy sigma=1.133569 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8245 x 2.125 at -4.375 degrees (North through East) ! Clean map min=-0.0067662 max=1.4425 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073797Jy sigma=1.133569 ! Fit after self-cal, rms=0.067011Jy sigma=0.983297 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067011Jy sigma=0.983297 ! Fit after self-cal, rms=0.067059Jy sigma=0.981355 ! Inverting map and beam ! Estimated beam: bmin=0.8253 mas, bmaj=2.127 mas, bpa=-4.391 degrees ! Estimated noise=1.46636 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000417218 Jy ! Component: 100 - total flux cleaned = 0.000954447 Jy ! Component: 150 - total flux cleaned = 0.00115611 Jy ! Component: 200 - total flux cleaned = 0.00126615 Jy ! Total flux subtracted in 200 components = 0.00126615 Jy ! Clean residual min=-0.004574 max=0.005569 Jy/beam ! Clean residual mean=-0.000027 rms=0.001347 Jy/beam ! Combined flux in latest and established models = 1.54055 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 50 components and 1.54055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066909Jy sigma=0.977845 ! Fit after self-cal, rms=0.066989Jy sigma=0.977219 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066989Jy sigma=0.977219 ! Fit after self-cal, rms=0.065992Jy sigma=0.959480 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065992Jy sigma=0.959480 ! Fit after self-cal, rms=0.066048Jy sigma=0.959417 ! Inverting map and beam ! Estimated beam: bmin=0.8257 mas, bmaj=2.129 mas, bpa=-4.396 degrees ! Estimated noise=1.46721 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000513255 Jy ! Component: 100 - total flux cleaned = 0.000769445 Jy ! Component: 150 - total flux cleaned = 0.000821718 Jy ! Component: 200 - total flux cleaned = 0.000864612 Jy ! Total flux subtracted in 200 components = 0.000864612 Jy ! Clean residual min=-0.004490 max=0.005375 Jy/beam ! Clean residual mean=-0.000027 rms=0.001321 Jy/beam ! Combined flux in latest and established models = 1.54141 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 51 components and 1.54142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065978Jy sigma=0.957674 ! Fit after self-cal, rms=0.065997Jy sigma=0.957529 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.128 mas, bmaj=4.45 mas, bpa=-4.017 degrees ! Estimated noise=1.96887 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000794979 Jy ! Component: 100 - total flux cleaned = -0.000796274 Jy ! Component: 150 - total flux cleaned = -0.000734092 Jy ! Component: 200 - total flux cleaned = -0.000650377 Jy ! Total flux subtracted in 200 components = -0.000650377 Jy ! Clean residual min=-0.004439 max=0.005249 Jy/beam ! Clean residual mean=-0.000053 rms=0.001553 Jy/beam ! Combined flux in latest and established models = 1.54076 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 56 components and 1.54076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066054Jy sigma=0.957463 ! Fit after self-cal, rms=0.066046Jy sigma=0.957233 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6713 mas, bmaj=1.802 mas, bpa=-7.351 degrees ! Estimated noise=1.82803 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.23789 Jy ! Component: 100 - total flux cleaned = 1.41837 Jy ! Component: 150 - total flux cleaned = 1.48538 Jy ! Component: 200 - total flux cleaned = 1.51721 Jy ! Total flux subtracted in 200 components = 1.51721 Jy ! Clean residual min=-0.009020 max=0.010930 Jy/beam ! Clean residual mean=-0.000063 rms=0.002471 Jy/beam ! Combined flux in latest and established models = 1.51721 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 1.51721 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8257 mas, bmaj=2.129 mas, bpa=-4.396 degrees ! Estimated noise=1.46721 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0178862 Jy ! Component: 100 - total flux cleaned = 0.0238011 Jy ! Component: 150 - total flux cleaned = 0.0247116 Jy ! Component: 200 - total flux cleaned = 0.0252371 Jy ! Total flux subtracted in 200 components = 0.0252371 Jy ! Clean residual min=-0.005009 max=0.005563 Jy/beam ! Clean residual mean=-0.000026 rms=0.001360 Jy/beam ! Combined flux in latest and established models = 1.54245 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 45 components and 1.54245 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.128 mas, bmaj=4.45 mas, bpa=-4.017 degrees ! Estimated noise=1.96887 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000304216 Jy ! Component: 100 - total flux cleaned = -0.000309281 Jy ! Component: 150 - total flux cleaned = -0.000375677 Jy ! Component: 200 - total flux cleaned = -0.00046188 Jy ! Total flux subtracted in 200 components = -0.00046188 Jy ! Clean residual min=-0.004460 max=0.005137 Jy/beam ! Clean residual mean=-0.000049 rms=0.001533 Jy/beam ! Combined flux in latest and established models = 1.54199 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 58 components and 1.54199 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8257 mas, bmaj=2.129 mas, bpa=-4.396 degrees ! Estimated noise=1.46721 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000921497 Jy ! Component: 100 - total flux cleaned = 0.000922746 Jy ! Component: 150 - total flux cleaned = 0.000923207 Jy ! Component: 200 - total flux cleaned = 0.000822868 Jy ! Total flux subtracted in 200 components = 0.000822868 Jy ! Clean residual min=-0.004752 max=0.005510 Jy/beam ! Clean residual mean=-0.000025 rms=0.001337 Jy/beam ! Combined flux in latest and established models = 1.54281 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 66 components and 1.54281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066037Jy sigma=0.958703 ! Fit after self-cal, rms=0.065992Jy sigma=0.958379 wmodel J1127-1857_X_2004_04_30_yyk\_map.mod ! Writing 66 model components to file: J1127-1857_X_2004_04_30_yyk_map.mod wobs J1127-1857_X_2004_04_30_yyk\_uvs.fits ! Writing UV FITS file: J1127-1857_X_2004_04_30_yyk_uvs.fits wwins J1127-1857_X_2004_04_30_yyk\_map.win ! wwins: Wrote 1 windows to J1127-1857_X_2004_04_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00197254 Jy ! Component: 100 - total flux cleaned = 0.00249258 Jy ! Component: 150 - total flux cleaned = 0.00265046 Jy ! Component: 200 - total flux cleaned = 0.00265057 Jy ! Component: 250 - total flux cleaned = 0.00279223 Jy ! Component: 300 - total flux cleaned = 0.00312219 Jy ! Component: 350 - total flux cleaned = 0.00293173 Jy ! Component: 400 - total flux cleaned = 0.00293324 Jy ! Component: 450 - total flux cleaned = 0.00263694 Jy ! Component: 500 - total flux cleaned = 0.00257888 Jy ! Component: 550 - total flux cleaned = 0.00235403 Jy ! Component: 600 - total flux cleaned = 0.00208334 Jy ! Component: 650 - total flux cleaned = 0.0019774 Jy ! Component: 700 - total flux cleaned = 0.00166858 Jy ! Component: 750 - total flux cleaned = 0.00146906 Jy ! Component: 800 - total flux cleaned = 0.00132189 Jy ! Component: 850 - total flux cleaned = 0.000985292 Jy ! Component: 900 - total flux cleaned = 0.000797298 Jy ! Component: 950 - total flux cleaned = 0.000476703 Jy ! Component: 1000 - total flux cleaned = 0.000343091 Jy ! Component: 1050 - total flux cleaned = 0.000124137 Jy ! Component: 1100 - total flux cleaned = 3.83265e-05 Jy ! Component: 1150 - total flux cleaned = -3.8832e-06 Jy ! Component: 1200 - total flux cleaned = -5.09601e-06 Jy ! Component: 1250 - total flux cleaned = -0.000169285 Jy ! Component: 1300 - total flux cleaned = -0.000249351 Jy ! Component: 1350 - total flux cleaned = -0.000327241 Jy ! Component: 1400 - total flux cleaned = -0.000210852 Jy ! Component: 1450 - total flux cleaned = -0.000402613 Jy ! Component: 1500 - total flux cleaned = -0.000439943 Jy ! Component: 1550 - total flux cleaned = -0.000550537 Jy ! Component: 1600 - total flux cleaned = -0.0005865 Jy ! Component: 1650 - total flux cleaned = -0.000658163 Jy ! Component: 1700 - total flux cleaned = -0.000763629 Jy ! Component: 1750 - total flux cleaned = -0.000833148 Jy ! Component: 1800 - total flux cleaned = -0.000935914 Jy ! Component: 1850 - total flux cleaned = -0.00103711 Jy ! Component: 1900 - total flux cleaned = -0.00117004 Jy ! Component: 1950 - total flux cleaned = -0.0011697 Jy ! Component: 2000 - total flux cleaned = -0.00123464 Jy ! Total flux subtracted in 2048 components = -0.00129818 Jy ! Clean residual min=-0.001820 max=0.002030 Jy/beam ! Clean residual mean=-0.000009 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 1.54151 Jy keep ! Adding 136 model components to the UV plane model. ! The established model now contains 202 components and 1.54151 Jy ![Exited script file: muppet] wmap "J1127-1857_X_2004_04_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8257 x 2.129 at -4.396 degrees (North through East) ! Clean map min=-0.0030915 max=1.4425 Jy/beam ! Writing clean map to FITS file: J1127-1857_X_2004_04_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.44252 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000588324 device "J1127-1857_X_2004_04_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J1127-1857_X_2004_04_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.122354 0.122354 0.244707 0.489414 0.978829 1.95766 3.91532 7.83063 15.6613 31.3225 62.6451 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.442 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8257 x 2.129 at -4.396 degrees (North through East) ! Clean map min=-0.0030915 max=1.4425 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1127-1857_X_2004_04_30_yyk\_map.gif/gif" ! Attempting to open device: 'J1127-1857_X_2004_04_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1127-1857_X_2004_04_30_yyk_uvs.log closed on Wed Dec 7 00:20:35 2005