! Started logfile: J1127-1857_S_2004_05_08_yyk_uvs.log on Wed Dec 7 00:20:23 2005 obs J1127-1857_S_2004_05_08_yyk_uve.fits ! Reading UV FITS file: J1127-1857_S_2004_05_08_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.95 visibilities/baseline/integration-bin. ! Found source: J1127-1857 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1434 lines of history. ! ! Reading 684 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1127-1857_S_2004_05_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.939667 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.118053Jy sigma=2.059119 ! Fit after self-cal, rms=0.118610Jy sigma=2.029279 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.647 mas, bmaj=6.956 mas, bpa=2.779 degrees ! Estimated noise=2.03878 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.80602 Jy ! Component: 100 - total flux cleaned = 0.916667 Jy ! Total flux subtracted in 100 components = 0.916667 Jy ! Clean residual min=-0.018265 max=0.022898 Jy/beam ! Clean residual mean=-0.000054 rms=0.005434 Jy/beam ! Combined flux in latest and established models = 0.916667 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.916667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099542Jy sigma=1.656536 ! Fit after self-cal, rms=0.099672Jy sigma=1.654084 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.975 mas, bmaj=8.146 mas, bpa=0.4029 degrees ! Estimated noise=1.70869 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0261394 Jy ! Component: 100 - total flux cleaned = 0.0317645 Jy ! Component: 150 - total flux cleaned = 0.032973 Jy ! Component: 200 - total flux cleaned = 0.033357 Jy ! Total flux subtracted in 200 components = 0.033357 Jy ! Clean residual min=-0.015109 max=0.016356 Jy/beam ! Clean residual mean=-0.000282 rms=0.004011 Jy/beam ! Combined flux in latest and established models = 0.950025 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 31 components and 0.950025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094661Jy sigma=1.562346 ! Fit after self-cal, rms=0.094644Jy sigma=1.561323 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01105 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.04 HN 0.96 KP 0.97 ! LA 1.07 MK 0.96 NL 0.97 OV 0.97 ! PT 1.01 SC 0.93 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.99049 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.05 KP 1.00 ! LA 1.05 MK 1.04 NL 1.02 OV 1.03 ! PT 0.94 SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00561 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.89 HN 1.01 KP 0.98 ! LA 0.95 MK 1.02 NL 1.05 OV 1.00 ! PT 1.04 SC 1.01 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.99468 ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.93 HN 0.97 KP 1.00* ! LA 1.00* MK 0.94 NL 0.99 OV 1.00* ! PT 0.98 SC 1.07 ! ! ! Fit before self-cal, rms=0.094644Jy sigma=1.561323 ! Fit after self-cal, rms=0.074578Jy sigma=1.213498 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074578Jy sigma=1.213498 ! Fit after self-cal, rms=0.074546Jy sigma=1.213447 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.959 mas, bmaj=8.16 mas, bpa=0.3776 degrees ! Estimated noise=1.70948 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00402627 Jy ! Component: 100 - total flux cleaned = 0.00430407 Jy ! Component: 150 - total flux cleaned = 0.00429657 Jy ! Component: 200 - total flux cleaned = 0.0042016 Jy ! Total flux subtracted in 200 components = 0.0042016 Jy ! Clean residual min=-0.009019 max=0.008905 Jy/beam ! Clean residual mean=0.000046 rms=0.002555 Jy/beam ! Combined flux in latest and established models = 0.954226 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 42 components and 0.954226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074183Jy sigma=1.205616 ! Fit after self-cal, rms=0.074237Jy sigma=1.204848 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074237Jy sigma=1.204848 ! Fit after self-cal, rms=0.072741Jy sigma=1.070339 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000854612 Jy ! Component: 100 - total flux cleaned = -0.000559228 Jy ! Component: 150 - total flux cleaned = -0.000293675 Jy ! Component: 200 - total flux cleaned = -0.000127156 Jy ! Total flux subtracted in 200 components = -0.000127156 Jy ! Clean residual min=-0.006966 max=0.007142 Jy/beam ! Clean residual mean=0.000046 rms=0.001978 Jy/beam ! Combined flux in latest and established models = 0.954099 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 46 components and 0.954099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072596Jy sigma=1.066470 ! Fit after self-cal, rms=0.073317Jy sigma=1.060901 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.959 x 8.16 at 0.3776 degrees (North through East) ! Clean map min=-0.0063175 max=0.93343 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073317Jy sigma=1.060901 ! Fit after self-cal, rms=0.071259Jy sigma=1.019040 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071259Jy sigma=1.019040 ! Fit after self-cal, rms=0.071582Jy sigma=1.018475 ! Inverting map and beam ! Estimated beam: bmin=2.957 mas, bmaj=8.153 mas, bpa=0.3985 degrees ! Estimated noise=1.70775 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 8.44221e-05 Jy ! Component: 100 - total flux cleaned = 0.000255949 Jy ! Component: 150 - total flux cleaned = 0.000258658 Jy ! Component: 200 - total flux cleaned = 0.000259039 Jy ! Total flux subtracted in 200 components = 0.000259039 Jy ! Clean residual min=-0.006471 max=0.006502 Jy/beam ! Clean residual mean=0.000039 rms=0.001881 Jy/beam ! Combined flux in latest and established models = 0.954358 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 54 components and 0.954358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071467Jy sigma=1.015877 ! Fit after self-cal, rms=0.071572Jy sigma=1.015581 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071572Jy sigma=1.015581 ! Fit after self-cal, rms=0.070339Jy sigma=0.959487 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070339Jy sigma=0.959487 ! Fit after self-cal, rms=0.070433Jy sigma=0.959453 ! Inverting map and beam ! Estimated beam: bmin=2.95 mas, bmaj=8.174 mas, bpa=0.4218 degrees ! Estimated noise=1.7073 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000654106 Jy ! Component: 100 - total flux cleaned = -0.000542765 Jy ! Component: 150 - total flux cleaned = -0.000397388 Jy ! Component: 200 - total flux cleaned = -0.00026555 Jy ! Total flux subtracted in 200 components = -0.00026555 Jy ! Clean residual min=-0.006174 max=0.006233 Jy/beam ! Clean residual mean=0.000042 rms=0.001800 Jy/beam ! Combined flux in latest and established models = 0.954092 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 63 components and 0.954092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070345Jy sigma=0.958100 ! Fit after self-cal, rms=0.070379Jy sigma=0.958008 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.631 mas, bmaj=18.02 mas, bpa=6.419 degrees ! Estimated noise=2.20432 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000102439 Jy ! Component: 100 - total flux cleaned = 0.000102053 Jy ! Component: 150 - total flux cleaned = 0.000101527 Jy ! Component: 200 - total flux cleaned = 0.000105211 Jy ! Total flux subtracted in 200 components = 0.000105211 Jy ! Clean residual min=-0.005884 max=0.007237 Jy/beam ! Clean residual mean=0.000075 rms=0.002232 Jy/beam ! Combined flux in latest and established models = 0.954198 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 64 components and 0.954198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070402Jy sigma=0.958112 ! Fit after self-cal, rms=0.070432Jy sigma=0.958087 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.642 mas, bmaj=6.979 mas, bpa=2.627 degrees ! Estimated noise=2.03863 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.806268 Jy ! Component: 100 - total flux cleaned = 0.916159 Jy ! Component: 150 - total flux cleaned = 0.941485 Jy ! Component: 200 - total flux cleaned = 0.949797 Jy ! Total flux subtracted in 200 components = 0.949797 Jy ! Clean residual min=-0.009127 max=0.007524 Jy/beam ! Clean residual mean=0.000065 rms=0.002245 Jy/beam ! Combined flux in latest and established models = 0.949797 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.949797 Jy ! Inverting map and beam ! Estimated beam: bmin=2.95 mas, bmaj=8.174 mas, bpa=0.4218 degrees ! Estimated noise=1.7073 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00367759 Jy ! Component: 100 - total flux cleaned = 0.00353086 Jy ! Component: 150 - total flux cleaned = 0.00327576 Jy ! Component: 200 - total flux cleaned = 0.00304772 Jy ! Total flux subtracted in 200 components = 0.00304772 Jy ! Clean residual min=-0.006956 max=0.007187 Jy/beam ! Clean residual mean=0.000048 rms=0.001969 Jy/beam ! Combined flux in latest and established models = 0.952845 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 37 components and 0.952845 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.631 mas, bmaj=18.02 mas, bpa=6.419 degrees ! Estimated noise=2.20432 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000793564 Jy ! Component: 100 - total flux cleaned = 0.000989638 Jy ! Component: 150 - total flux cleaned = 0.00118749 Jy ! Component: 200 - total flux cleaned = 0.00123079 Jy ! Total flux subtracted in 200 components = 0.00123079 Jy ! Clean residual min=-0.005926 max=0.007320 Jy/beam ! Clean residual mean=0.000079 rms=0.002262 Jy/beam ! Combined flux in latest and established models = 0.954076 Jy ! Adding 4 model components to the UV plane model. ! The established model now contains 40 components and 0.954076 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.95 mas, bmaj=8.174 mas, bpa=0.4218 degrees ! Estimated noise=1.7073 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000747237 Jy ! Component: 100 - total flux cleaned = -0.000939168 Jy ! Component: 150 - total flux cleaned = -0.000934568 Jy ! Component: 200 - total flux cleaned = -0.000867337 Jy ! Total flux subtracted in 200 components = -0.000867337 Jy ! Clean residual min=-0.006656 max=0.006804 Jy/beam ! Clean residual mean=0.000046 rms=0.001897 Jy/beam ! Combined flux in latest and established models = 0.953208 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 49 components and 0.953208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070062Jy sigma=0.962683 ! Fit after self-cal, rms=0.070158Jy sigma=0.962467 wmodel J1127-1857_S_2004_05_08_yyk\_map.mod ! Writing 49 model components to file: J1127-1857_S_2004_05_08_yyk_map.mod wobs J1127-1857_S_2004_05_08_yyk\_uvs.fits ! Writing UV FITS file: J1127-1857_S_2004_05_08_yyk_uvs.fits wwins J1127-1857_S_2004_05_08_yyk\_map.win ! wwins: Wrote 1 windows to J1127-1857_S_2004_05_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000253903 Jy ! Component: 100 - total flux cleaned = 0.000825513 Jy ! Component: 150 - total flux cleaned = 0.00113907 Jy ! Component: 200 - total flux cleaned = 0.0010325 Jy ! Component: 250 - total flux cleaned = 0.00122043 Jy ! Component: 300 - total flux cleaned = 0.0014026 Jy ! Component: 350 - total flux cleaned = 0.00174938 Jy ! Component: 400 - total flux cleaned = 0.00199639 Jy ! Component: 450 - total flux cleaned = 0.00215554 Jy ! Component: 500 - total flux cleaned = 0.00245756 Jy ! Component: 550 - total flux cleaned = 0.00260214 Jy ! Component: 600 - total flux cleaned = 0.00274285 Jy ! Component: 650 - total flux cleaned = 0.00294286 Jy ! Component: 700 - total flux cleaned = 0.00300647 Jy ! Component: 750 - total flux cleaned = 0.00313392 Jy ! Component: 800 - total flux cleaned = 0.0031962 Jy ! Component: 850 - total flux cleaned = 0.00319689 Jy ! Component: 900 - total flux cleaned = 0.00342451 Jy ! Component: 950 - total flux cleaned = 0.00359009 Jy ! Component: 1000 - total flux cleaned = 0.00375042 Jy ! Component: 1050 - total flux cleaned = 0.00385461 Jy ! Component: 1100 - total flux cleaned = 0.00426308 Jy ! Component: 1150 - total flux cleaned = 0.00456264 Jy ! Component: 1200 - total flux cleaned = 0.00505202 Jy ! Component: 1250 - total flux cleaned = 0.00534001 Jy ! Component: 1300 - total flux cleaned = 0.00552936 Jy ! Component: 1350 - total flux cleaned = 0.00576168 Jy ! Component: 1400 - total flux cleaned = 0.00603448 Jy ! Component: 1450 - total flux cleaned = 0.00634715 Jy ! Component: 1500 - total flux cleaned = 0.00647941 Jy ! Component: 1550 - total flux cleaned = 0.00669653 Jy ! Component: 1600 - total flux cleaned = 0.00686785 Jy ! Component: 1650 - total flux cleaned = 0.00711938 Jy ! Component: 1700 - total flux cleaned = 0.00728432 Jy ! Component: 1750 - total flux cleaned = 0.00740618 Jy ! Component: 1800 - total flux cleaned = 0.0076867 Jy ! Component: 1850 - total flux cleaned = 0.00784459 Jy ! Component: 1900 - total flux cleaned = 0.00803955 Jy ! Component: 1950 - total flux cleaned = 0.00815475 Jy ! Component: 2000 - total flux cleaned = 0.00838182 Jy ! Total flux subtracted in 2048 components = 0.00845639 Jy ! Clean residual min=-0.002082 max=0.002399 Jy/beam ! Clean residual mean=0.000047 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.961665 Jy keep ! Adding 128 model components to the UV plane model. ! The established model now contains 177 components and 0.961665 Jy ![Exited script file: muppet] wmap "J1127-1857_S_2004_05_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.95 x 8.174 at 0.4218 degrees (North through East) ! Clean map min=-0.0043753 max=0.9333 Jy/beam ! Writing clean map to FITS file: J1127-1857_S_2004_05_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.933296 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000706315 device "J1127-1857_S_2004_05_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J1127-1857_S_2004_05_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.227039 0.227039 0.454077 0.908155 1.81631 3.63262 7.26524 14.5305 29.0609 58.1219 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.933 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.95 x 8.174 at 0.4218 degrees (North through East) ! Clean map min=-0.0043753 max=0.9333 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1127-1857_S_2004_05_08_yyk\_map.gif/gif" ! Attempting to open device: 'J1127-1857_S_2004_05_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1127-1857_S_2004_05_08_yyk_uvs.log closed on Wed Dec 7 00:20:27 2005