! Started logfile: J1127-1857_S_2004_04_30_yyk_uvs.log on Wed Dec 7 00:20:19 2005 obs J1127-1857_S_2004_04_30_yyk_uve.fits ! Reading UV FITS file: J1127-1857_S_2004_04_30_yyk_uve.fits ! AN table 1: 5 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.924444 visibilities/baseline/integration-bin. ! Found source: J1127-1857 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1629 lines of history. ! ! Reading 832 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1127-1857_S_2004_04_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.01046 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.109513Jy sigma=1.749636 ! Fit after self-cal, rms=0.109271Jy sigma=1.745136 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.502 mas, bmaj=7.08 mas, bpa=-7.31 degrees ! Estimated noise=2.28651 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.864109 Jy ! Component: 100 - total flux cleaned = 0.980386 Jy ! Total flux subtracted in 100 components = 0.980386 Jy ! Clean residual min=-0.021319 max=0.027019 Jy/beam ! Clean residual mean=-0.000174 rms=0.006157 Jy/beam ! Combined flux in latest and established models = 0.980386 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.980386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111784Jy sigma=1.764814 ! Fit after self-cal, rms=0.111756Jy sigma=1.764693 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.099 mas, bmaj=8.163 mas, bpa=-7.365 degrees ! Estimated noise=1.72162 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0263731 Jy ! Component: 100 - total flux cleaned = 0.0282469 Jy ! Component: 150 - total flux cleaned = 0.0279572 Jy ! Component: 200 - total flux cleaned = 0.0277199 Jy ! Total flux subtracted in 200 components = 0.0277199 Jy ! Clean residual min=-0.018083 max=0.022924 Jy/beam ! Clean residual mean=-0.000151 rms=0.005134 Jy/beam ! Combined flux in latest and established models = 1.00811 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 24 components and 1.00811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106000Jy sigma=1.682078 ! Fit after self-cal, rms=0.105994Jy sigma=1.681945 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00191 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 0.94 KP 0.97 ! LA 1.13 MK 1.02 NL 0.97 OV 1.01 ! PT 1.00 SC 0.93 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.986053 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 1.05 KP 0.99 ! LA 1.09 MK 1.01 NL 1.00 OV 1.00 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00463 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 0.98 KP 0.98 ! LA 0.93 MK 1.05 NL 1.04 OV 1.05 ! PT 1.04 SC 1.00 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.01188 ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.91 HN 0.97 KP 0.91 ! LA 1.00* MK 0.95 NL 0.97 OV 1.00* ! PT 0.95 SC 1.10 ! ! ! Fit before self-cal, rms=0.105994Jy sigma=1.681945 ! Fit after self-cal, rms=0.074552Jy sigma=1.079062 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074552Jy sigma=1.079062 ! Fit after self-cal, rms=0.074574Jy sigma=1.079015 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.105 mas, bmaj=8.221 mas, bpa=-7.203 degrees ! Estimated noise=1.71172 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00133375 Jy ! Component: 100 - total flux cleaned = -0.00172204 Jy ! Component: 150 - total flux cleaned = -0.00171975 Jy ! Component: 200 - total flux cleaned = -0.00165557 Jy ! Total flux subtracted in 200 components = -0.00165557 Jy ! Clean residual min=-0.006518 max=0.007281 Jy/beam ! Clean residual mean=-0.000004 rms=0.002022 Jy/beam ! Combined flux in latest and established models = 1.00645 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 35 components and 1.00645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074336Jy sigma=1.074968 ! Fit after self-cal, rms=0.074309Jy sigma=1.074420 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074309Jy sigma=1.074420 ! Fit after self-cal, rms=0.072318Jy sigma=1.042300 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00025519 Jy ! Component: 100 - total flux cleaned = 0.000369992 Jy ! Component: 150 - total flux cleaned = 0.000369561 Jy ! Component: 200 - total flux cleaned = 0.0003688 Jy ! Total flux subtracted in 200 components = 0.0003688 Jy ! Clean residual min=-0.006482 max=0.006969 Jy/beam ! Clean residual mean=-0.000004 rms=0.002010 Jy/beam ! Combined flux in latest and established models = 1.00682 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 42 components and 1.00682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072240Jy sigma=1.041134 ! Fit after self-cal, rms=0.072273Jy sigma=1.037863 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.105 x 8.221 at -7.203 degrees (North through East) ! Clean map min=-0.0063697 max=0.99683 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072273Jy sigma=1.037863 ! Fit after self-cal, rms=0.069856Jy sigma=0.984770 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069856Jy sigma=0.984770 ! Fit after self-cal, rms=0.070004Jy sigma=0.984253 ! Inverting map and beam ! Estimated beam: bmin=3.104 mas, bmaj=8.222 mas, bpa=-7.191 degrees ! Estimated noise=1.71151 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000542218 Jy ! Component: 100 - total flux cleaned = 0.000695831 Jy ! Component: 150 - total flux cleaned = 0.000736205 Jy ! Component: 200 - total flux cleaned = 0.000806452 Jy ! Total flux subtracted in 200 components = 0.000806452 Jy ! Clean residual min=-0.006146 max=0.006527 Jy/beam ! Clean residual mean=0.000007 rms=0.001871 Jy/beam ! Combined flux in latest and established models = 1.00763 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 48 components and 1.00763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069933Jy sigma=0.983209 ! Fit after self-cal, rms=0.070040Jy sigma=0.982941 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070040Jy sigma=0.982941 ! Fit after self-cal, rms=0.067942Jy sigma=0.944981 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067942Jy sigma=0.944981 ! Fit after self-cal, rms=0.067989Jy sigma=0.944954 ! Inverting map and beam ! Estimated beam: bmin=3.104 mas, bmaj=8.222 mas, bpa=-7.174 degrees ! Estimated noise=1.71119 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -5.86002e-05 Jy ! Component: 100 - total flux cleaned = 1.39217e-05 Jy ! Component: 150 - total flux cleaned = 4.45811e-05 Jy ! Component: 200 - total flux cleaned = 7.28483e-05 Jy ! Total flux subtracted in 200 components = 7.28483e-05 Jy ! Clean residual min=-0.006118 max=0.006272 Jy/beam ! Clean residual mean=0.000005 rms=0.001875 Jy/beam ! Combined flux in latest and established models = 1.0077 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 56 components and 1.0077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067944Jy sigma=0.944383 ! Fit after self-cal, rms=0.067980Jy sigma=0.944263 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.417 mas, bmaj=16.48 mas, bpa=-6.105 degrees ! Estimated noise=2.23594 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000614221 Jy ! Component: 100 - total flux cleaned = 0.000586135 Jy ! Component: 150 - total flux cleaned = 0.000537394 Jy ! Component: 200 - total flux cleaned = 0.000536803 Jy ! Total flux subtracted in 200 components = 0.000536803 Jy ! Clean residual min=-0.006813 max=0.008505 Jy/beam ! Clean residual mean=0.000015 rms=0.002932 Jy/beam ! Combined flux in latest and established models = 1.00824 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 60 components and 1.00824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068037Jy sigma=0.944569 ! Fit after self-cal, rms=0.068048Jy sigma=0.944501 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.502 mas, bmaj=7.135 mas, bpa=-7.344 degrees ! Estimated noise=2.28038 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.861891 Jy ! Component: 100 - total flux cleaned = 0.975998 Jy ! Component: 150 - total flux cleaned = 1.00078 Jy ! Component: 200 - total flux cleaned = 1.00837 Jy ! Total flux subtracted in 200 components = 1.00837 Jy ! Clean residual min=-0.009186 max=0.007791 Jy/beam ! Clean residual mean=-0.000015 rms=0.002107 Jy/beam ! Combined flux in latest and established models = 1.00837 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 1.00837 Jy ! Inverting map and beam ! Estimated beam: bmin=3.104 mas, bmaj=8.222 mas, bpa=-7.174 degrees ! Estimated noise=1.71119 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000519436 Jy ! Component: 100 - total flux cleaned = 0.00100921 Jy ! Component: 150 - total flux cleaned = 0.00117674 Jy ! Component: 200 - total flux cleaned = 0.00104887 Jy ! Total flux subtracted in 200 components = 0.00104887 Jy ! Clean residual min=-0.006314 max=0.006250 Jy/beam ! Clean residual mean=0.000011 rms=0.001887 Jy/beam ! Combined flux in latest and established models = 1.00942 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 29 components and 1.00942 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.417 mas, bmaj=16.48 mas, bpa=-6.105 degrees ! Estimated noise=2.23594 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000119588 Jy ! Component: 100 - total flux cleaned = -0.000220476 Jy ! Component: 150 - total flux cleaned = -0.000268648 Jy ! Component: 200 - total flux cleaned = -0.000351568 Jy ! Total flux subtracted in 200 components = -0.000351568 Jy ! Clean residual min=-0.006850 max=0.008705 Jy/beam ! Clean residual mean=0.000019 rms=0.002936 Jy/beam ! Combined flux in latest and established models = 1.00907 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 33 components and 1.00907 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.104 mas, bmaj=8.222 mas, bpa=-7.174 degrees ! Estimated noise=1.71119 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000402924 Jy ! Component: 100 - total flux cleaned = -0.000248998 Jy ! Component: 150 - total flux cleaned = -0.000167467 Jy ! Component: 200 - total flux cleaned = -0.000100772 Jy ! Total flux subtracted in 200 components = -0.000100772 Jy ! Clean residual min=-0.006164 max=0.006131 Jy/beam ! Clean residual mean=0.000009 rms=0.001874 Jy/beam ! Combined flux in latest and established models = 1.00897 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 42 components and 1.00897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068044Jy sigma=0.945114 ! Fit after self-cal, rms=0.068052Jy sigma=0.944910 wmodel J1127-1857_S_2004_04_30_yyk\_map.mod ! Writing 42 model components to file: J1127-1857_S_2004_04_30_yyk_map.mod wobs J1127-1857_S_2004_04_30_yyk\_uvs.fits ! Writing UV FITS file: J1127-1857_S_2004_04_30_yyk_uvs.fits wwins J1127-1857_S_2004_04_30_yyk\_map.win ! wwins: Wrote 1 windows to J1127-1857_S_2004_04_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000107287 Jy ! Component: 100 - total flux cleaned = -0.000424139 Jy ! Component: 150 - total flux cleaned = -0.000421278 Jy ! Component: 200 - total flux cleaned = -0.000769742 Jy ! Component: 250 - total flux cleaned = -0.000851703 Jy ! Component: 300 - total flux cleaned = -0.00124237 Jy ! Component: 350 - total flux cleaned = -0.00116711 Jy ! Component: 400 - total flux cleaned = -0.00102707 Jy ! Component: 450 - total flux cleaned = -0.000759392 Jy ! Component: 500 - total flux cleaned = -0.000563442 Jy ! Component: 550 - total flux cleaned = -0.000126253 Jy ! Component: 600 - total flux cleaned = 0.000114368 Jy ! Component: 650 - total flux cleaned = 0.00040671 Jy ! Component: 700 - total flux cleaned = 0.000689605 Jy ! Component: 750 - total flux cleaned = 0.000911198 Jy ! Component: 800 - total flux cleaned = 0.00101913 Jy ! Component: 850 - total flux cleaned = 0.00122753 Jy ! Component: 900 - total flux cleaned = 0.00127741 Jy ! Component: 950 - total flux cleaned = 0.0013263 Jy ! Component: 1000 - total flux cleaned = 0.00151954 Jy ! Component: 1050 - total flux cleaned = 0.00175347 Jy ! Component: 1100 - total flux cleaned = 0.00161639 Jy ! Component: 1150 - total flux cleaned = 0.00175066 Jy ! Component: 1200 - total flux cleaned = 0.00170628 Jy ! Component: 1250 - total flux cleaned = 0.00178944 Jy ! Component: 1300 - total flux cleaned = 0.0017053 Jy ! Component: 1350 - total flux cleaned = 0.00162392 Jy ! Component: 1400 - total flux cleaned = 0.00162409 Jy ! Component: 1450 - total flux cleaned = 0.00154628 Jy ! Component: 1500 - total flux cleaned = 0.00158385 Jy ! Component: 1550 - total flux cleaned = 0.00154594 Jy ! Component: 1600 - total flux cleaned = 0.00143627 Jy ! Component: 1650 - total flux cleaned = 0.00136464 Jy ! Component: 1700 - total flux cleaned = 0.00132874 Jy ! Component: 1750 - total flux cleaned = 0.00115468 Jy ! Component: 1800 - total flux cleaned = 0.00108605 Jy ! Component: 1850 - total flux cleaned = 0.00105228 Jy ! Component: 1900 - total flux cleaned = 0.000985257 Jy ! Component: 1950 - total flux cleaned = 0.00114849 Jy ! Component: 2000 - total flux cleaned = 0.00108329 Jy ! Total flux subtracted in 2048 components = 0.00105093 Jy ! Clean residual min=-0.001940 max=0.001781 Jy/beam ! Clean residual mean=-0.000021 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 1.01002 Jy keep ! Adding 153 model components to the UV plane model. ! The established model now contains 195 components and 1.01002 Jy ![Exited script file: muppet] wmap "J1127-1857_S_2004_04_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.104 x 8.222 at -7.174 degrees (North through East) ! Clean map min=-0.0041863 max=0.99508 Jy/beam ! Writing clean map to FITS file: J1127-1857_S_2004_04_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.995078 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000650436 device "J1127-1857_S_2004_04_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J1127-1857_S_2004_04_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.196096 0.196096 0.392192 0.784384 1.56877 3.13754 6.27507 12.5501 25.1003 50.2006 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.995 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.104 x 8.222 at -7.174 degrees (North through East) ! Clean map min=-0.0041863 max=0.99508 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1127-1857_S_2004_04_30_yyk\_map.gif/gif" ! Attempting to open device: 'J1127-1857_S_2004_04_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1127-1857_S_2004_04_30_yyk_uvs.log closed on Wed Dec 7 00:20:23 2005