! Started logfile: J1113-3549_S_2004_05_08_yyk_uvs.log on Wed Dec 7 00:19:43 2005 obs J1113-3549_S_2004_05_08_yyk_uve.fits ! Reading UV FITS file: J1113-3549_S_2004_05_08_yyk_uve.fits ! AN table 1: 6 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.588889 visibilities/baseline/integration-bin. ! Found source: J1113-3549 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1433 lines of history. ! ! Reading 636 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1113-3549_S_2004_05_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.219215 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.802354Jy sigma=12.556550 ! Fit after self-cal, rms=0.802115Jy sigma=12.553876 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.665 mas, bmaj=6.966 mas, bpa=-4.506 degrees ! Estimated noise=2.8417 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.160933 Jy ! Component: 100 - total flux cleaned = 0.19228 Jy ! Total flux subtracted in 100 components = 0.19228 Jy ! Clean residual min=-0.017983 max=0.020992 Jy/beam ! Clean residual mean=0.000115 rms=0.005022 Jy/beam ! Combined flux in latest and established models = 0.19228 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.19228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082271Jy sigma=1.266826 ! Fit after self-cal, rms=0.082272Jy sigma=1.266626 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.624 mas, bmaj=9.209 mas, bpa=-3.07 degrees ! Estimated noise=2.12615 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0200368 Jy ! Component: 100 - total flux cleaned = 0.0262703 Jy ! Component: 150 - total flux cleaned = 0.0274218 Jy ! Component: 200 - total flux cleaned = 0.0275061 Jy ! Total flux subtracted in 200 components = 0.0275061 Jy ! Clean residual min=-0.016786 max=0.020730 Jy/beam ! Clean residual mean=0.000096 rms=0.005697 Jy/beam ! Combined flux in latest and established models = 0.219787 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 27 components and 0.219787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078153Jy sigma=1.218451 ! Fit after self-cal, rms=0.078152Jy sigma=1.218409 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02366 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.06 HN 1.00* KP 0.83 ! LA 0.98 MK 0.97 NL 1.14 OV 0.96 ! PT 0.90 SC 0.91 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00113 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.94 HN 1.00* KP 1.01 ! LA 1.02 MK 1.12 NL 1.08 OV 1.00 ! PT 0.86 SC 0.89 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.078152Jy sigma=1.218409 ! Fit after self-cal, rms=0.076926Jy sigma=1.182767 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076926Jy sigma=1.182767 ! Fit after self-cal, rms=0.076949Jy sigma=1.182725 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.637 mas, bmaj=9.244 mas, bpa=-1.385 degrees ! Estimated noise=2.08589 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00327402 Jy ! Component: 100 - total flux cleaned = -0.00307732 Jy ! Component: 150 - total flux cleaned = -0.00299477 Jy ! Component: 200 - total flux cleaned = -0.00291738 Jy ! Total flux subtracted in 200 components = -0.00291738 Jy ! Clean residual min=-0.014992 max=0.017877 Jy/beam ! Clean residual mean=0.000115 rms=0.004732 Jy/beam ! Combined flux in latest and established models = 0.216869 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 33 components and 0.216869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077102Jy sigma=1.179128 ! Fit after self-cal, rms=0.077093Jy sigma=1.179071 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077093Jy sigma=1.179071 ! Fit after self-cal, rms=0.075739Jy sigma=1.154869 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000483789 Jy ! Component: 100 - total flux cleaned = 0.000543556 Jy ! Component: 150 - total flux cleaned = 0.000598032 Jy ! Component: 200 - total flux cleaned = 0.000600813 Jy ! Total flux subtracted in 200 components = 0.000600813 Jy ! Clean residual min=-0.014940 max=0.017758 Jy/beam ! Clean residual mean=0.000117 rms=0.004705 Jy/beam ! Combined flux in latest and established models = 0.21747 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 36 components and 0.21747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075669Jy sigma=1.153850 ! Fit after self-cal, rms=0.075640Jy sigma=1.152725 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.637 x 9.244 at -1.385 degrees (North through East) ! Clean map min=-0.014481 max=0.18084 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075640Jy sigma=1.152725 ! Fit after self-cal, rms=0.073838Jy sigma=1.146452 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073838Jy sigma=1.146452 ! Fit after self-cal, rms=0.073844Jy sigma=1.146377 ! Inverting map and beam ! Estimated beam: bmin=3.638 mas, bmaj=9.268 mas, bpa=-0.5465 degrees ! Estimated noise=2.03786 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00450735 Jy ! Component: 100 - total flux cleaned = -0.00451431 Jy ! Component: 150 - total flux cleaned = -0.00445735 Jy ! Component: 200 - total flux cleaned = -0.00440258 Jy ! Total flux subtracted in 200 components = -0.00440258 Jy ! Clean residual min=-0.013734 max=0.016999 Jy/beam ! Clean residual mean=0.000106 rms=0.004353 Jy/beam ! Combined flux in latest and established models = 0.213067 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 37 components and 0.213067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074100Jy sigma=1.142568 ! Fit after self-cal, rms=0.074099Jy sigma=1.142524 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074099Jy sigma=1.142524 ! Fit after self-cal, rms=0.072732Jy sigma=1.132499 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072732Jy sigma=1.132499 ! Fit after self-cal, rms=0.072737Jy sigma=1.132482 ! Inverting map and beam ! Estimated beam: bmin=3.641 mas, bmaj=9.288 mas, bpa=-0.1091 degrees ! Estimated noise=2.0148 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0021534 Jy ! Component: 100 - total flux cleaned = -0.00215721 Jy ! Component: 150 - total flux cleaned = -0.00210378 Jy ! Component: 200 - total flux cleaned = -0.00205562 Jy ! Total flux subtracted in 200 components = -0.00205562 Jy ! Clean residual min=-0.012934 max=0.016587 Jy/beam ! Clean residual mean=0.000106 rms=0.004170 Jy/beam ! Combined flux in latest and established models = 0.211012 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 43 components and 0.211012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072855Jy sigma=1.130979 ! Fit after self-cal, rms=0.072856Jy sigma=1.130944 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.917 mas, bmaj=32.56 mas, bpa=2.176 degrees ! Estimated noise=2.40415 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00240327 Jy ! Component: 100 - total flux cleaned = 0.00260961 Jy ! Component: 150 - total flux cleaned = 0.00271075 Jy ! Component: 200 - total flux cleaned = 0.00290836 Jy ! Total flux subtracted in 200 components = 0.00290836 Jy ! Clean residual min=-0.012900 max=0.019334 Jy/beam ! Clean residual mean=0.000226 rms=0.005499 Jy/beam ! Combined flux in latest and established models = 0.21392 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 45 components and 0.21392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072863Jy sigma=1.131742 ! Fit after self-cal, rms=0.072861Jy sigma=1.131357 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.671 mas, bmaj=6.944 mas, bpa=-3.027 degrees ! Estimated noise=2.74348 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.155223 Jy ! Component: 100 - total flux cleaned = 0.185287 Jy ! Component: 150 - total flux cleaned = 0.197953 Jy ! Component: 200 - total flux cleaned = 0.20382 Jy ! Total flux subtracted in 200 components = 0.20382 Jy ! Clean residual min=-0.015723 max=0.016688 Jy/beam ! Clean residual mean=0.000102 rms=0.004173 Jy/beam ! Combined flux in latest and established models = 0.20382 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.20382 Jy ! Inverting map and beam ! Estimated beam: bmin=3.641 mas, bmaj=9.288 mas, bpa=-0.1091 degrees ! Estimated noise=2.0148 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00552201 Jy ! Component: 100 - total flux cleaned = 0.00596762 Jy ! Component: 150 - total flux cleaned = 0.00626671 Jy ! Component: 200 - total flux cleaned = 0.00633497 Jy ! Total flux subtracted in 200 components = 0.00633497 Jy ! Clean residual min=-0.013172 max=0.016880 Jy/beam ! Clean residual mean=0.000103 rms=0.004233 Jy/beam ! Combined flux in latest and established models = 0.210155 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 33 components and 0.210155 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.917 mas, bmaj=32.56 mas, bpa=2.176 degrees ! Estimated noise=2.40415 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256284 Jy ! Component: 100 - total flux cleaned = 0.0026786 Jy ! Component: 150 - total flux cleaned = 0.00289518 Jy ! Component: 200 - total flux cleaned = 0.00299901 Jy ! Total flux subtracted in 200 components = 0.00299901 Jy ! Clean residual min=-0.012969 max=0.019536 Jy/beam ! Clean residual mean=0.000222 rms=0.005552 Jy/beam ! Combined flux in latest and established models = 0.213154 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 36 components and 0.213154 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.641 mas, bmaj=9.288 mas, bpa=-0.1091 degrees ! Estimated noise=2.0148 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00246741 Jy ! Component: 100 - total flux cleaned = -0.00246955 Jy ! Component: 150 - total flux cleaned = -0.00247793 Jy ! Component: 200 - total flux cleaned = -0.00242758 Jy ! Total flux subtracted in 200 components = -0.00242758 Jy ! Clean residual min=-0.012996 max=0.016681 Jy/beam ! Clean residual mean=0.000105 rms=0.004189 Jy/beam ! Combined flux in latest and established models = 0.210727 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 43 components and 0.210727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072993Jy sigma=1.132197 ! Fit after self-cal, rms=0.072988Jy sigma=1.132118 wmodel J1113-3549_S_2004_05_08_yyk\_map.mod ! Writing 43 model components to file: J1113-3549_S_2004_05_08_yyk_map.mod wobs J1113-3549_S_2004_05_08_yyk\_uvs.fits ! Writing UV FITS file: J1113-3549_S_2004_05_08_yyk_uvs.fits wwins J1113-3549_S_2004_05_08_yyk\_map.win ! wwins: Wrote 1 windows to J1113-3549_S_2004_05_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00590572 Jy ! Component: 100 - total flux cleaned = 0.00823419 Jy ! Component: 150 - total flux cleaned = 0.00946843 Jy ! Component: 200 - total flux cleaned = 0.0107745 Jy ! Component: 250 - total flux cleaned = 0.011454 Jy ! Component: 300 - total flux cleaned = 0.0123954 Jy ! Component: 350 - total flux cleaned = 0.0134144 Jy ! Component: 400 - total flux cleaned = 0.0147834 Jy ! Component: 450 - total flux cleaned = 0.0163314 Jy ! Component: 500 - total flux cleaned = 0.0174285 Jy ! Component: 550 - total flux cleaned = 0.018935 Jy ! Component: 600 - total flux cleaned = 0.0200443 Jy ! Component: 650 - total flux cleaned = 0.0211086 Jy ! Component: 700 - total flux cleaned = 0.0220305 Jy ! Component: 750 - total flux cleaned = 0.0229227 Jy ! Component: 800 - total flux cleaned = 0.0236927 Jy ! Component: 850 - total flux cleaned = 0.0244415 Jy ! Component: 900 - total flux cleaned = 0.0251691 Jy ! Component: 950 - total flux cleaned = 0.0257008 Jy ! Component: 1000 - total flux cleaned = 0.0262169 Jy ! Component: 1050 - total flux cleaned = 0.0264707 Jy ! Component: 1100 - total flux cleaned = 0.0266344 Jy ! Component: 1150 - total flux cleaned = 0.0268754 Jy ! Component: 1200 - total flux cleaned = 0.0269533 Jy ! Component: 1250 - total flux cleaned = 0.0269534 Jy ! Component: 1300 - total flux cleaned = 0.0271066 Jy ! Component: 1350 - total flux cleaned = 0.0272554 Jy ! Component: 1400 - total flux cleaned = 0.027329 Jy ! Component: 1450 - total flux cleaned = 0.0274011 Jy ! Component: 1500 - total flux cleaned = 0.0273305 Jy ! Component: 1550 - total flux cleaned = 0.0272596 Jy ! Component: 1600 - total flux cleaned = 0.0270517 Jy ! Component: 1650 - total flux cleaned = 0.0271197 Jy ! Component: 1700 - total flux cleaned = 0.0267816 Jy ! Component: 1750 - total flux cleaned = 0.0267821 Jy ! Component: 1800 - total flux cleaned = 0.0266501 Jy ! Component: 1850 - total flux cleaned = 0.0267159 Jy ! Component: 1900 - total flux cleaned = 0.0267157 Jy ! Component: 1950 - total flux cleaned = 0.0265875 Jy ! Component: 2000 - total flux cleaned = 0.0265875 Jy ! Total flux subtracted in 2048 components = 0.0263988 Jy ! Clean residual min=-0.004555 max=0.004188 Jy/beam ! Clean residual mean=0.000055 rms=0.001268 Jy/beam ! Combined flux in latest and established models = 0.237125 Jy keep ! Adding 117 model components to the UV plane model. ! The established model now contains 160 components and 0.237125 Jy ![Exited script file: muppet] wmap "J1113-3549_S_2004_05_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.641 x 9.288 at -0.1091 degrees (North through East) ! Clean map min=-0.0071639 max=0.17248 Jy/beam ! Writing clean map to FITS file: J1113-3549_S_2004_05_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.172485 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00122478 device "J1113-3549_S_2004_05_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J1113-3549_S_2004_05_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.13024 2.13024 4.26047 8.52095 17.0419 34.0838 68.1676 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0036 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.172 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.641 x 9.288 at -0.1091 degrees (North through East) ! Clean map min=-0.0071639 max=0.17248 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1113-3549_S_2004_05_08_yyk\_map.gif/gif" ! Attempting to open device: 'J1113-3549_S_2004_05_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1113-3549_S_2004_05_08_yyk_uvs.log closed on Wed Dec 7 00:19:47 2005