! Started logfile: J1058-3024_X_2004_04_30_yyk_uvs.log on Wed Dec 7 00:18:46 2005 obs J1058-3024_X_2004_04_30_yyk_uve.fits ! Reading UV FITS file: J1058-3024_X_2004_04_30_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1058-3024 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1544 lines of history. ! ! Reading 720 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1058-3024_X_2004_04_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.293901 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.735050Jy sigma=11.610640 ! Fit after self-cal, rms=0.735012Jy sigma=11.608460 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6892 mas, bmaj=1.845 mas, bpa=-5.053 degrees ! Estimated noise=2.14549 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.227283 Jy ! Component: 100 - total flux cleaned = 0.290964 Jy ! Total flux subtracted in 100 components = 0.290964 Jy ! Clean residual min=-0.013886 max=0.020418 Jy/beam ! Clean residual mean=-0.000146 rms=0.003979 Jy/beam ! Combined flux in latest and established models = 0.290964 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.290964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087901Jy sigma=1.281967 ! Fit after self-cal, rms=0.087716Jy sigma=1.279879 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8334 mas, bmaj=2.235 mas, bpa=-2.444 degrees ! Estimated noise=1.6498 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0396608 Jy ! Component: 100 - total flux cleaned = 0.0546454 Jy ! Component: 150 - total flux cleaned = 0.0608058 Jy ! Component: 200 - total flux cleaned = 0.0620983 Jy ! Total flux subtracted in 200 components = 0.0620983 Jy ! Clean residual min=-0.008871 max=0.013208 Jy/beam ! Clean residual mean=-0.000046 rms=0.002583 Jy/beam ! Combined flux in latest and established models = 0.353062 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 25 components and 0.353062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077287Jy sigma=1.062000 ! Fit after self-cal, rms=0.077238Jy sigma=1.061574 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00756 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 1.09 KP 0.98 ! LA 0.95 MK 0.97 NL 1.04 OV 1.03 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.999376 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 HN 1.11 KP 0.91 ! LA 0.93 MK 1.01 NL 1.04 OV 1.04 ! PT 1.02 SC 0.99 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.978701 ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.99 HN 1.07 KP 0.93 ! LA 0.94 MK 1.03 NL 0.97 OV 1.05 ! PT 1.06 SC 1.08 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.973643 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.05 HN 1.05 KP 0.92 ! LA 0.99 MK 1.07 NL 0.98 OV 1.09 ! PT 1.12 SC 0.97 ! ! ! Fit before self-cal, rms=0.077238Jy sigma=1.061574 ! Fit after self-cal, rms=0.075470Jy sigma=1.011966 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075470Jy sigma=1.011966 ! Fit after self-cal, rms=0.075484Jy sigma=1.011924 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8426 mas, bmaj=2.247 mas, bpa=-2.194 degrees ! Estimated noise=1.62821 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.4, 1.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105157 Jy ! Component: 100 - total flux cleaned = 0.0110806 Jy ! Component: 150 - total flux cleaned = 0.0109534 Jy ! Component: 200 - total flux cleaned = 0.0107244 Jy ! Total flux subtracted in 200 components = 0.0107244 Jy ! Clean residual min=-0.004760 max=0.005612 Jy/beam ! Clean residual mean=0.000022 rms=0.001386 Jy/beam ! Combined flux in latest and established models = 0.363786 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 53 components and 0.363786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074085Jy sigma=0.984912 ! Fit after self-cal, rms=0.074033Jy sigma=0.984187 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074033Jy sigma=0.984187 ! Fit after self-cal, rms=0.072044Jy sigma=0.948496 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015359 Jy ! Component: 100 - total flux cleaned = 0.00163397 Jy ! Component: 150 - total flux cleaned = 0.00155152 Jy ! Component: 200 - total flux cleaned = 0.00147448 Jy ! Total flux subtracted in 200 components = 0.00147448 Jy ! Clean residual min=-0.004460 max=0.005332 Jy/beam ! Clean residual mean=0.000022 rms=0.001305 Jy/beam ! Combined flux in latest and established models = 0.365261 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 64 components and 0.365261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071850Jy sigma=0.945314 ! Fit after self-cal, rms=0.071714Jy sigma=0.942539 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8426 x 2.247 at -2.194 degrees (North through East) ! Clean map min=-0.0041336 max=0.26651 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071714Jy sigma=0.942539 ! Fit after self-cal, rms=0.071711Jy sigma=0.933356 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071711Jy sigma=0.933356 ! Fit after self-cal, rms=0.071708Jy sigma=0.933138 ! Inverting map and beam ! Estimated beam: bmin=0.8436 mas, bmaj=2.25 mas, bpa=-2.108 degrees ! Estimated noise=1.63052 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123061 Jy ! Component: 100 - total flux cleaned = 0.00137092 Jy ! Component: 150 - total flux cleaned = 0.00142915 Jy ! Component: 200 - total flux cleaned = 0.00149056 Jy ! Total flux subtracted in 200 components = 0.00149056 Jy ! Clean residual min=-0.004442 max=0.005098 Jy/beam ! Clean residual mean=0.000007 rms=0.001239 Jy/beam ! Combined flux in latest and established models = 0.366751 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 69 components and 0.366751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071599Jy sigma=0.931449 ! Fit after self-cal, rms=0.071602Jy sigma=0.931365 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071602Jy sigma=0.931365 ! Fit after self-cal, rms=0.070978Jy sigma=0.919107 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070978Jy sigma=0.919107 ! Fit after self-cal, rms=0.070987Jy sigma=0.919092 ! Inverting map and beam ! Estimated beam: bmin=0.8435 mas, bmaj=2.251 mas, bpa=-2.128 degrees ! Estimated noise=1.63178 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000591579 Jy ! Component: 100 - total flux cleaned = 0.000703614 Jy ! Component: 150 - total flux cleaned = 0.000808325 Jy ! Component: 200 - total flux cleaned = 0.000857008 Jy ! Total flux subtracted in 200 components = 0.000857008 Jy ! Clean residual min=-0.004296 max=0.004951 Jy/beam ! Clean residual mean=0.000006 rms=0.001222 Jy/beam ! Combined flux in latest and established models = 0.367608 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 72 components and 0.367608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070911Jy sigma=0.917991 ! Fit after self-cal, rms=0.070915Jy sigma=0.917960 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.425 mas, bmaj=6.872 mas, bpa=0.3887 degrees ! Estimated noise=2.11233 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000777981 Jy ! Component: 100 - total flux cleaned = 0.000773524 Jy ! Component: 150 - total flux cleaned = 0.000853597 Jy ! Component: 200 - total flux cleaned = 0.000930104 Jy ! Total flux subtracted in 200 components = 0.000930104 Jy ! Clean residual min=-0.004408 max=0.005561 Jy/beam ! Clean residual mean=0.000013 rms=0.001552 Jy/beam ! Combined flux in latest and established models = 0.368539 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 80 components and 0.368539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070931Jy sigma=0.917969 ! Fit after self-cal, rms=0.070930Jy sigma=0.917792 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6933 mas, bmaj=1.843 mas, bpa=-4.743 degrees ! Estimated noise=2.15483 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.228743 Jy ! Component: 100 - total flux cleaned = 0.2919 Jy ! Component: 150 - total flux cleaned = 0.319528 Jy ! Component: 200 - total flux cleaned = 0.335018 Jy ! Total flux subtracted in 200 components = 0.335018 Jy ! Clean residual min=-0.007787 max=0.009178 Jy/beam ! Clean residual mean=-0.000051 rms=0.002035 Jy/beam ! Combined flux in latest and established models = 0.335018 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.335018 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8435 mas, bmaj=2.251 mas, bpa=-2.128 degrees ! Estimated noise=1.63178 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.2, 0.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146246 Jy ! Component: 100 - total flux cleaned = 0.0224753 Jy ! Component: 150 - total flux cleaned = 0.0273943 Jy ! Component: 200 - total flux cleaned = 0.0296239 Jy ! Total flux subtracted in 200 components = 0.0296239 Jy ! Clean residual min=-0.004579 max=0.004783 Jy/beam ! Clean residual mean=-0.000005 rms=0.001281 Jy/beam ! Combined flux in latest and established models = 0.364642 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 55 components and 0.364642 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.425 mas, bmaj=6.872 mas, bpa=0.3887 degrees ! Estimated noise=2.11233 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00280545 Jy ! Component: 100 - total flux cleaned = 0.00337472 Jy ! Component: 150 - total flux cleaned = 0.0034598 Jy ! Component: 200 - total flux cleaned = 0.00354149 Jy ! Total flux subtracted in 200 components = 0.00354149 Jy ! Clean residual min=-0.004209 max=0.005268 Jy/beam ! Clean residual mean=0.000011 rms=0.001552 Jy/beam ! Combined flux in latest and established models = 0.368184 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 63 components and 0.368184 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8435 mas, bmaj=2.251 mas, bpa=-2.128 degrees ! Estimated noise=1.63178 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00074855 Jy ! Component: 100 - total flux cleaned = -0.000566715 Jy ! Component: 150 - total flux cleaned = -0.000487179 Jy ! Component: 200 - total flux cleaned = -0.000271901 Jy ! Total flux subtracted in 200 components = -0.000271901 Jy ! Clean residual min=-0.004210 max=0.004637 Jy/beam ! Clean residual mean=0.000007 rms=0.001202 Jy/beam ! Combined flux in latest and established models = 0.367912 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 77 components and 0.367912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070843Jy sigma=0.916475 ! Fit after self-cal, rms=0.070818Jy sigma=0.916041 wmodel J1058-3024_X_2004_04_30_yyk\_map.mod ! Writing 77 model components to file: J1058-3024_X_2004_04_30_yyk_map.mod wobs J1058-3024_X_2004_04_30_yyk\_uvs.fits ! Writing UV FITS file: J1058-3024_X_2004_04_30_yyk_uvs.fits wwins J1058-3024_X_2004_04_30_yyk\_map.win ! wwins: Wrote 3 windows to J1058-3024_X_2004_04_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000319598 Jy ! Component: 100 - total flux cleaned = -0.000196972 Jy ! Component: 150 - total flux cleaned = -0.000674447 Jy ! Component: 200 - total flux cleaned = -0.0010578 Jy ! Component: 250 - total flux cleaned = -0.00111862 Jy ! Component: 300 - total flux cleaned = -0.000890142 Jy ! Component: 350 - total flux cleaned = -0.000890486 Jy ! Component: 400 - total flux cleaned = -0.000784647 Jy ! Component: 450 - total flux cleaned = -0.000785002 Jy ! Component: 500 - total flux cleaned = -0.000686892 Jy ! Component: 550 - total flux cleaned = -0.000498758 Jy ! Component: 600 - total flux cleaned = -0.000318519 Jy ! Component: 650 - total flux cleaned = -0.000363328 Jy ! Component: 700 - total flux cleaned = -0.000145408 Jy ! Component: 750 - total flux cleaned = -1.90563e-05 Jy ! Component: 800 - total flux cleaned = 0.000144821 Jy ! Component: 850 - total flux cleaned = 0.000224757 Jy ! Component: 900 - total flux cleaned = 0.000381971 Jy ! Component: 950 - total flux cleaned = 0.000497877 Jy ! Component: 1000 - total flux cleaned = 0.000610465 Jy ! Component: 1050 - total flux cleaned = 0.000536214 Jy ! Component: 1100 - total flux cleaned = 0.000500096 Jy ! Component: 1150 - total flux cleaned = 0.00046461 Jy ! Component: 1200 - total flux cleaned = 0.000394504 Jy ! Component: 1250 - total flux cleaned = 0.000429101 Jy ! Component: 1300 - total flux cleaned = 0.000360898 Jy ! Component: 1350 - total flux cleaned = 0.000327484 Jy ! Component: 1400 - total flux cleaned = 0.000327995 Jy ! Component: 1450 - total flux cleaned = 0.000262666 Jy ! Component: 1500 - total flux cleaned = 0.000198897 Jy ! Component: 1550 - total flux cleaned = 0.000199053 Jy ! Component: 1600 - total flux cleaned = 0.000168101 Jy ! Component: 1650 - total flux cleaned = 0.00013747 Jy ! Component: 1700 - total flux cleaned = 7.7321e-05 Jy ! Component: 1750 - total flux cleaned = 7.80296e-05 Jy ! Component: 1800 - total flux cleaned = 0.000107529 Jy ! Component: 1850 - total flux cleaned = 0.000136317 Jy ! Component: 1900 - total flux cleaned = 0.000164877 Jy ! Component: 1950 - total flux cleaned = 0.000193024 Jy ! Component: 2000 - total flux cleaned = 0.000108943 Jy ! Total flux subtracted in 2048 components = 8.17165e-05 Jy ! Clean residual min=-0.001410 max=0.001788 Jy/beam ! Clean residual mean=0.000012 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.367993 Jy keep ! Adding 111 model components to the UV plane model. ! The established model now contains 188 components and 0.367994 Jy ![Exited script file: muppet] wmap "J1058-3024_X_2004_04_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8435 x 2.251 at -2.128 degrees (North through East) ! Clean map min=-0.0030687 max=0.27006 Jy/beam ! Writing clean map to FITS file: J1058-3024_X_2004_04_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.270065 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000519466 device "J1058-3024_X_2004_04_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J1058-3024_X_2004_04_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.577046 0.577046 1.15409 2.30818 4.61636 9.23273 18.4655 36.9309 73.8618 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.27 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8435 x 2.251 at -2.128 degrees (North through East) ! Clean map min=-0.0030687 max=0.27006 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1058-3024_X_2004_04_30_yyk\_map.gif/gif" ! Attempting to open device: 'J1058-3024_X_2004_04_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1058-3024_X_2004_04_30_yyk_uvs.log closed on Wed Dec 7 00:18:50 2005