! Started logfile: J1058-3024_S_2004_04_30_yyk_uvs.log on Wed Dec 7 00:18:42 2005 obs J1058-3024_S_2004_04_30_yyk_uve.fits ! Reading UV FITS file: J1058-3024_S_2004_04_30_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1058-3024 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1627 lines of history. ! ! Reading 720 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1058-3024_S_2004_04_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.279211 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.748137Jy sigma=10.342824 ! Fit after self-cal, rms=0.748015Jy sigma=10.340399 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.467 mas, bmaj=6.964 mas, bpa=-5.465 degrees ! Estimated noise=2.60269 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.214436 Jy ! Component: 100 - total flux cleaned = 0.26356 Jy ! Total flux subtracted in 100 components = 0.26356 Jy ! Clean residual min=-0.014832 max=0.024908 Jy/beam ! Clean residual mean=-0.000204 rms=0.004334 Jy/beam ! Combined flux in latest and established models = 0.26356 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.26356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097281Jy sigma=1.208041 ! Fit after self-cal, rms=0.097138Jy sigma=1.206736 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.109 mas, bmaj=8.4 mas, bpa=-4.845 degrees ! Estimated noise=1.95175 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 0.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0353116 Jy ! Component: 100 - total flux cleaned = 0.04965 Jy ! Component: 150 - total flux cleaned = 0.0561245 Jy ! Component: 200 - total flux cleaned = 0.0574998 Jy ! Total flux subtracted in 200 components = 0.0574998 Jy ! Clean residual min=-0.009744 max=0.011582 Jy/beam ! Clean residual mean=-0.000195 rms=0.002676 Jy/beam ! Combined flux in latest and established models = 0.32106 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 45 components and 0.32106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088354Jy sigma=1.068331 ! Fit after self-cal, rms=0.088115Jy sigma=1.065835 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.994846 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.07 KP 0.98 ! LA 1.15 MK 1.03 NL 0.98 OV 0.92 ! PT 1.04 SC 0.88 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.088115Jy sigma=1.065835 ! Fit after self-cal, rms=0.087127Jy sigma=1.048408 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087127Jy sigma=1.048408 ! Fit after self-cal, rms=0.087121Jy sigma=1.048389 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.078 mas, bmaj=8.295 mas, bpa=-3.922 degrees ! Estimated noise=1.94695 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00617881 Jy ! Component: 100 - total flux cleaned = 0.00680367 Jy ! Component: 150 - total flux cleaned = 0.006906 Jy ! Component: 200 - total flux cleaned = 0.00710076 Jy ! Total flux subtracted in 200 components = 0.00710076 Jy ! Clean residual min=-0.008046 max=0.008378 Jy/beam ! Clean residual mean=-0.000099 rms=0.002210 Jy/beam ! Combined flux in latest and established models = 0.32816 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 65 components and 0.32816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086718Jy sigma=1.042522 ! Fit after self-cal, rms=0.086650Jy sigma=1.041956 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086650Jy sigma=1.041956 ! Fit after self-cal, rms=0.084999Jy sigma=1.018435 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165311 Jy ! Component: 100 - total flux cleaned = 0.00165733 Jy ! Component: 150 - total flux cleaned = 0.00165732 Jy ! Component: 200 - total flux cleaned = 0.00157829 Jy ! Total flux subtracted in 200 components = 0.00157829 Jy ! Clean residual min=-0.007936 max=0.008087 Jy/beam ! Clean residual mean=-0.000095 rms=0.002177 Jy/beam ! Combined flux in latest and established models = 0.329739 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 74 components and 0.329739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084865Jy sigma=1.016336 ! Fit after self-cal, rms=0.084739Jy sigma=1.014521 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.078 x 8.295 at -3.922 degrees (North through East) ! Clean map min=-0.0074428 max=0.24619 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084739Jy sigma=1.014521 ! Fit after self-cal, rms=0.084868Jy sigma=1.013321 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084868Jy sigma=1.013321 ! Fit after self-cal, rms=0.084864Jy sigma=1.013202 ! Inverting map and beam ! Estimated beam: bmin=3.068 mas, bmaj=8.273 mas, bpa=-3.741 degrees ! Estimated noise=1.95519 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0033141 Jy ! Component: 100 - total flux cleaned = 0.0036266 Jy ! Component: 150 - total flux cleaned = 0.00369355 Jy ! Component: 200 - total flux cleaned = 0.00376361 Jy ! Total flux subtracted in 200 components = 0.00376361 Jy ! Clean residual min=-0.007838 max=0.007892 Jy/beam ! Clean residual mean=-0.000099 rms=0.002166 Jy/beam ! Combined flux in latest and established models = 0.333502 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 84 components and 0.333502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084703Jy sigma=1.011169 ! Fit after self-cal, rms=0.084665Jy sigma=1.010967 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084665Jy sigma=1.010967 ! Fit after self-cal, rms=0.084545Jy sigma=1.007267 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084545Jy sigma=1.007267 ! Fit after self-cal, rms=0.084547Jy sigma=1.007262 ! Inverting map and beam ! Estimated beam: bmin=3.068 mas, bmaj=8.27 mas, bpa=-3.681 degrees ! Estimated noise=1.95852 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141983 Jy ! Component: 100 - total flux cleaned = 0.0014189 Jy ! Component: 150 - total flux cleaned = 0.00148371 Jy ! Component: 200 - total flux cleaned = 0.00154818 Jy ! Total flux subtracted in 200 components = 0.00154818 Jy ! Clean residual min=-0.007743 max=0.007746 Jy/beam ! Clean residual mean=-0.000100 rms=0.002159 Jy/beam ! Combined flux in latest and established models = 0.33505 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 89 components and 0.33505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084468Jy sigma=1.005935 ! Fit after self-cal, rms=0.084438Jy sigma=1.005815 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.953 mas, bmaj=22.1 mas, bpa=0.4694 degrees ! Estimated noise=2.53629 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186628 Jy ! Component: 100 - total flux cleaned = 0.00211912 Jy ! Component: 150 - total flux cleaned = 0.00224945 Jy ! Component: 200 - total flux cleaned = 0.00237289 Jy ! Total flux subtracted in 200 components = 0.00237289 Jy ! Clean residual min=-0.009146 max=0.009801 Jy/beam ! Clean residual mean=-0.000174 rms=0.003121 Jy/beam ! Combined flux in latest and established models = 0.337423 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 98 components and 0.337423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084403Jy sigma=1.005597 ! Fit after self-cal, rms=0.084411Jy sigma=1.005481 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.458 mas, bmaj=6.921 mas, bpa=-5.018 degrees ! Estimated noise=2.59479 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.214576 Jy ! Component: 100 - total flux cleaned = 0.267721 Jy ! Component: 150 - total flux cleaned = 0.295691 Jy ! Component: 200 - total flux cleaned = 0.311724 Jy ! Total flux subtracted in 200 components = 0.311724 Jy ! Clean residual min=-0.009484 max=0.009548 Jy/beam ! Clean residual mean=-0.000080 rms=0.002594 Jy/beam ! Combined flux in latest and established models = 0.311724 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.311724 Jy ! Inverting map and beam ! Estimated beam: bmin=3.068 mas, bmaj=8.27 mas, bpa=-3.681 degrees ! Estimated noise=1.95852 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120024 Jy ! Component: 100 - total flux cleaned = 0.017886 Jy ! Component: 150 - total flux cleaned = 0.0207523 Jy ! Component: 200 - total flux cleaned = 0.021194 Jy ! Total flux subtracted in 200 components = 0.021194 Jy ! Clean residual min=-0.007961 max=0.007921 Jy/beam ! Clean residual mean=-0.000106 rms=0.002216 Jy/beam ! Combined flux in latest and established models = 0.332918 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 64 components and 0.332918 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.953 mas, bmaj=22.1 mas, bpa=0.4694 degrees ! Estimated noise=2.53629 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256049 Jy ! Component: 100 - total flux cleaned = 0.00298148 Jy ! Component: 150 - total flux cleaned = 0.00334558 Jy ! Component: 200 - total flux cleaned = 0.00356355 Jy ! Total flux subtracted in 200 components = 0.00356355 Jy ! Clean residual min=-0.009308 max=0.009723 Jy/beam ! Clean residual mean=-0.000179 rms=0.003143 Jy/beam ! Combined flux in latest and established models = 0.336481 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 73 components and 0.336481 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.068 mas, bmaj=8.27 mas, bpa=-3.681 degrees ! Estimated noise=1.95852 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00130569 Jy ! Component: 100 - total flux cleaned = -0.00139892 Jy ! Component: 150 - total flux cleaned = -0.00147575 Jy ! Component: 200 - total flux cleaned = -0.00155245 Jy ! Total flux subtracted in 200 components = -0.00155245 Jy ! Clean residual min=-0.007854 max=0.007881 Jy/beam ! Clean residual mean=-0.000103 rms=0.002162 Jy/beam ! Combined flux in latest and established models = 0.334929 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 88 components and 0.334929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084502Jy sigma=1.006313 ! Fit after self-cal, rms=0.084431Jy sigma=1.005983 wmodel J1058-3024_S_2004_04_30_yyk\_map.mod ! Writing 88 model components to file: J1058-3024_S_2004_04_30_yyk_map.mod wobs J1058-3024_S_2004_04_30_yyk\_uvs.fits ! Writing UV FITS file: J1058-3024_S_2004_04_30_yyk_uvs.fits wwins J1058-3024_S_2004_04_30_yyk\_map.win ! wwins: Wrote 2 windows to J1058-3024_S_2004_04_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000434927 Jy ! Component: 100 - total flux cleaned = 0.000943184 Jy ! Component: 150 - total flux cleaned = 0.00165147 Jy ! Component: 200 - total flux cleaned = 0.00197854 Jy ! Component: 250 - total flux cleaned = 0.00218148 Jy ! Component: 300 - total flux cleaned = 0.00227911 Jy ! Component: 350 - total flux cleaned = 0.00218545 Jy ! Component: 400 - total flux cleaned = 0.00200927 Jy ! Component: 450 - total flux cleaned = 0.00142489 Jy ! Component: 500 - total flux cleaned = 0.00110623 Jy ! Component: 550 - total flux cleaned = 0.000950722 Jy ! Component: 600 - total flux cleaned = 0.000430245 Jy ! Component: 650 - total flux cleaned = 6.92406e-05 Jy ! Component: 700 - total flux cleaned = -0.00042178 Jy ! Component: 750 - total flux cleaned = -0.000695393 Jy ! Component: 800 - total flux cleaned = -0.00102472 Jy ! Component: 850 - total flux cleaned = -0.0014064 Jy ! Component: 900 - total flux cleaned = -0.0015917 Jy ! Component: 950 - total flux cleaned = -0.00183444 Jy ! Component: 1000 - total flux cleaned = -0.0022499 Jy ! Component: 1050 - total flux cleaned = -0.00265621 Jy ! Component: 1100 - total flux cleaned = -0.0030546 Jy ! Component: 1150 - total flux cleaned = -0.00338865 Jy ! Component: 1200 - total flux cleaned = -0.00371594 Jy ! Component: 1250 - total flux cleaned = -0.00392941 Jy ! Component: 1300 - total flux cleaned = -0.00413834 Jy ! Component: 1350 - total flux cleaned = -0.00429206 Jy ! Component: 1400 - total flux cleaned = -0.00449225 Jy ! Component: 1450 - total flux cleaned = -0.00468942 Jy ! Component: 1500 - total flux cleaned = -0.0047858 Jy ! Component: 1550 - total flux cleaned = -0.0050714 Jy ! Component: 1600 - total flux cleaned = -0.00549189 Jy ! Component: 1650 - total flux cleaned = -0.00576773 Jy ! Component: 1700 - total flux cleaned = -0.00608468 Jy ! Component: 1750 - total flux cleaned = -0.00621889 Jy ! Component: 1800 - total flux cleaned = -0.00643914 Jy ! Component: 1850 - total flux cleaned = -0.00687192 Jy ! Component: 1900 - total flux cleaned = -0.00708452 Jy ! Component: 1950 - total flux cleaned = -0.00729462 Jy ! Component: 2000 - total flux cleaned = -0.00733576 Jy ! Total flux subtracted in 2048 components = -0.00770394 Jy ! Clean residual min=-0.002281 max=0.002968 Jy/beam ! Clean residual mean=-0.000043 rms=0.000840 Jy/beam ! Combined flux in latest and established models = 0.327225 Jy keep ! Adding 124 model components to the UV plane model. ! The established model now contains 212 components and 0.327225 Jy ![Exited script file: muppet] wmap "J1058-3024_S_2004_04_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.068 x 8.27 at -3.681 degrees (North through East) ! Clean map min=-0.0056927 max=0.24769 Jy/beam ! Writing clean map to FITS file: J1058-3024_S_2004_04_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.247693 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000847416 device "J1058-3024_S_2004_04_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J1058-3024_S_2004_04_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.02637 1.02637 2.05274 4.10548 8.21095 16.4219 32.8438 65.6876 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0025 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.247 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.068 x 8.27 at -3.681 degrees (North through East) ! Clean map min=-0.0056927 max=0.24769 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1058-3024_S_2004_04_30_yyk\_map.gif/gif" ! Attempting to open device: 'J1058-3024_S_2004_04_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1058-3024_S_2004_04_30_yyk_uvs.log closed on Wed Dec 7 00:18:46 2005