! Started logfile: J1058-0309_X_2004_05_08_yyk_uvs.log on Wed Dec 7 00:18:38 2005 obs J1058-0309_X_2004_05_08_yyk_uve.fits ! Reading UV FITS file: J1058-0309_X_2004_05_08_yyk_uve.fits ! AN table 1: 22 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.854545 visibilities/baseline/integration-bin. ! Found source: J1058-0309 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1434 lines of history. ! ! Reading 3384 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1058-0309_X_2004_05_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.105568 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.926773Jy sigma=18.475612 ! Fit after self-cal, rms=0.926565Jy sigma=18.468120 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7166 mas, bmaj=1.771 mas, bpa=-0.6384 degrees ! Estimated noise=1.00557 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0601335 Jy ! Component: 100 - total flux cleaned = 0.0777301 Jy ! Total flux subtracted in 100 components = 0.0777301 Jy ! Clean residual min=-0.007267 max=0.020649 Jy/beam ! Clean residual mean=-0.000014 rms=0.002364 Jy/beam ! Combined flux in latest and established models = 0.0777301 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0777301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071432Jy sigma=1.354056 ! Fit after self-cal, rms=0.071413Jy sigma=1.353358 ! Inverting map ! Added new window around map position (2.2, -5). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0211545 Jy ! Component: 100 - total flux cleaned = 0.0302449 Jy ! Total flux subtracted in 100 components = 0.0302449 Jy ! Clean residual min=-0.006014 max=0.009984 Jy/beam ! Clean residual mean=-0.000013 rms=0.001755 Jy/beam ! Combined flux in latest and established models = 0.107975 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 30 components and 0.107975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066218Jy sigma=1.217585 ! Fit after self-cal, rms=0.065805Jy sigma=1.208474 ! Inverting map ! Added new window around map position (4.6, -11.2). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130237 Jy ! Component: 100 - total flux cleaned = 0.0205318 Jy ! Total flux subtracted in 100 components = 0.0205318 Jy ! Clean residual min=-0.004903 max=0.005217 Jy/beam ! Clean residual mean=-0.000007 rms=0.001396 Jy/beam ! Combined flux in latest and established models = 0.128507 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 52 components and 0.128507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063134Jy sigma=1.139969 ! Fit after self-cal, rms=0.062843Jy sigma=1.134105 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9875 mas, bmaj=2.242 mas, bpa=1.562 degrees ! Estimated noise=0.615717 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115708 Jy ! Component: 100 - total flux cleaned = 0.0175981 Jy ! Component: 150 - total flux cleaned = 0.0216017 Jy ! Component: 200 - total flux cleaned = 0.0243861 Jy ! Total flux subtracted in 200 components = 0.0243861 Jy ! Clean residual min=-0.004088 max=0.003572 Jy/beam ! Clean residual mean=-0.000003 rms=0.001047 Jy/beam ! Combined flux in latest and established models = 0.152893 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 83 components and 0.152893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061585Jy sigma=1.098154 ! Fit after self-cal, rms=0.061354Jy sigma=1.093485 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.03709 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.91 HN 0.86 KP 0.95 ! LA 0.97 MK 0.95 NL 1.02 OV 1.06 ! PT 0.98 SC 0.97 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.993072 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.12 HN 0.85 KP 0.91 ! LA 0.97 MK 1.10 NL 0.99 OV 1.05 ! PT 1.06 SC 1.00 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.982145 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.07 HN 0.94 KP 0.93 ! LA 0.94 MK 0.97 NL 1.04 OV 0.99 ! PT 1.13 SC 1.10 ! ! ! Fit before self-cal, rms=0.061354Jy sigma=1.093485 ! Fit after self-cal, rms=0.060954Jy sigma=1.087367 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060954Jy sigma=1.087367 ! Fit after self-cal, rms=0.060954Jy sigma=1.087349 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9846 mas, bmaj=2.25 mas, bpa=0.5874 degrees ! Estimated noise=0.615264 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00378576 Jy ! Component: 100 - total flux cleaned = 0.00591343 Jy ! Component: 150 - total flux cleaned = 0.00647622 Jy ! Component: 200 - total flux cleaned = 0.00674398 Jy ! Total flux subtracted in 200 components = 0.00674398 Jy ! Clean residual min=-0.003608 max=0.002979 Jy/beam ! Clean residual mean=0.000001 rms=0.000827 Jy/beam ! Combined flux in latest and established models = 0.159637 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 95 components and 0.159637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060787Jy sigma=1.082947 ! Fit after self-cal, rms=0.060759Jy sigma=1.082415 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060759Jy sigma=1.082415 ! Fit after self-cal, rms=0.057858Jy sigma=1.020555 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196327 Jy ! Component: 100 - total flux cleaned = 0.00257792 Jy ! Component: 150 - total flux cleaned = 0.00295439 Jy ! Component: 200 - total flux cleaned = 0.00316689 Jy ! Total flux subtracted in 200 components = 0.00316689 Jy ! Clean residual min=-0.002967 max=0.002857 Jy/beam ! Clean residual mean=0.000003 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.162804 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 102 components and 0.162804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057759Jy sigma=1.018094 ! Fit after self-cal, rms=0.057640Jy sigma=1.014589 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9846 x 2.25 at 0.5874 degrees (North through East) ! Clean map min=-0.0026752 max=0.07107 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.236 mas, bmaj=3.75 mas, bpa=-3.797 degrees ! Estimated noise=0.764505 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000874784 Jy ! Component: 100 - total flux cleaned = 0.00063554 Jy ! Component: 150 - total flux cleaned = 0.00051834 Jy ! Component: 200 - total flux cleaned = 0.000446006 Jy ! Total flux subtracted in 200 components = 0.000446006 Jy ! Clean residual min=-0.002739 max=0.002709 Jy/beam ! Clean residual mean=0.000006 rms=0.000835 Jy/beam ! Combined flux in latest and established models = 0.16325 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 111 components and 0.16325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057634Jy sigma=1.014275 ! Fit after self-cal, rms=0.057636Jy sigma=1.013833 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7177 mas, bmaj=1.784 mas, bpa=-1.151 degrees ! Estimated noise=1.00101 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0655687 Jy ! Component: 100 - total flux cleaned = 0.0916743 Jy ! Component: 150 - total flux cleaned = 0.108582 Jy ! Component: 200 - total flux cleaned = 0.120314 Jy ! Total flux subtracted in 200 components = 0.120314 Jy ! Clean residual min=-0.004721 max=0.005539 Jy/beam ! Clean residual mean=-0.000016 rms=0.001367 Jy/beam ! Combined flux in latest and established models = 0.120315 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.120315 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9846 mas, bmaj=2.25 mas, bpa=0.5874 degrees ! Estimated noise=0.615264 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.015294 Jy ! Component: 100 - total flux cleaned = 0.0239387 Jy ! Component: 150 - total flux cleaned = 0.029491 Jy ! Component: 200 - total flux cleaned = 0.0333707 Jy ! Total flux subtracted in 200 components = 0.0333707 Jy ! Clean residual min=-0.002980 max=0.003208 Jy/beam ! Clean residual mean=-0.000004 rms=0.000830 Jy/beam ! Combined flux in latest and established models = 0.153685 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 88 components and 0.153685 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.236 mas, bmaj=3.75 mas, bpa=-3.797 degrees ! Estimated noise=0.764505 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00396378 Jy ! Component: 100 - total flux cleaned = 0.00606476 Jy ! Component: 150 - total flux cleaned = 0.00731821 Jy ! Component: 200 - total flux cleaned = 0.00796712 Jy ! Total flux subtracted in 200 components = 0.00796712 Jy ! Clean residual min=-0.002856 max=0.002870 Jy/beam ! Clean residual mean=0.000004 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.161652 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 111 components and 0.161652 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9846 mas, bmaj=2.25 mas, bpa=0.5874 degrees ! Estimated noise=0.615264 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000376208 Jy ! Component: 100 - total flux cleaned = 0.000555312 Jy ! Component: 150 - total flux cleaned = 0.000707842 Jy ! Component: 200 - total flux cleaned = 0.000791042 Jy ! Total flux subtracted in 200 components = 0.000791042 Jy ! Clean residual min=-0.003050 max=0.002895 Jy/beam ! Clean residual mean=0.000003 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 0.162443 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 120 components and 0.162443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057656Jy sigma=1.013741 ! Fit after self-cal, rms=0.057626Jy sigma=1.013243 wmodel J1058-0309_X_2004_05_08_yyk\_map.mod ! Writing 120 model components to file: J1058-0309_X_2004_05_08_yyk_map.mod wobs J1058-0309_X_2004_05_08_yyk\_uvs.fits ! Writing UV FITS file: J1058-0309_X_2004_05_08_yyk_uvs.fits wwins J1058-0309_X_2004_05_08_yyk\_map.win ! wwins: Wrote 3 windows to J1058-0309_X_2004_05_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 9.45244e-05 Jy ! Component: 100 - total flux cleaned = -0.000128835 Jy ! Component: 150 - total flux cleaned = -0.000386703 Jy ! Component: 200 - total flux cleaned = -0.000590689 Jy ! Component: 250 - total flux cleaned = -0.000550885 Jy ! Component: 300 - total flux cleaned = -0.000512769 Jy ! Component: 350 - total flux cleaned = -0.000403383 Jy ! Component: 400 - total flux cleaned = -0.00036798 Jy ! Component: 450 - total flux cleaned = -0.000157919 Jy ! Component: 500 - total flux cleaned = -2.12567e-05 Jy ! Component: 550 - total flux cleaned = 7.93156e-05 Jy ! Component: 600 - total flux cleaned = 0.000178316 Jy ! Component: 650 - total flux cleaned = 0.000275462 Jy ! Component: 700 - total flux cleaned = 0.000370809 Jy ! Component: 750 - total flux cleaned = 0.000339335 Jy ! Component: 800 - total flux cleaned = 0.000339671 Jy ! Component: 850 - total flux cleaned = 0.000370517 Jy ! Component: 900 - total flux cleaned = 0.000580307 Jy ! Component: 950 - total flux cleaned = 0.000579571 Jy ! Component: 1000 - total flux cleaned = 0.000550008 Jy ! Component: 1050 - total flux cleaned = 0.000550236 Jy ! Component: 1100 - total flux cleaned = 0.00069167 Jy ! Component: 1150 - total flux cleaned = 0.000691504 Jy ! Component: 1200 - total flux cleaned = 0.000774092 Jy ! Component: 1250 - total flux cleaned = 0.000856434 Jy ! Component: 1300 - total flux cleaned = 0.000964 Jy ! Component: 1350 - total flux cleaned = 0.000963881 Jy ! Component: 1400 - total flux cleaned = 0.00104318 Jy ! Component: 1450 - total flux cleaned = 0.00114798 Jy ! Component: 1500 - total flux cleaned = 0.00125099 Jy ! Component: 1550 - total flux cleaned = 0.00127576 Jy ! Component: 1600 - total flux cleaned = 0.00125026 Jy ! Component: 1650 - total flux cleaned = 0.00132525 Jy ! Component: 1700 - total flux cleaned = 0.00130073 Jy ! Component: 1750 - total flux cleaned = 0.00139879 Jy ! Component: 1800 - total flux cleaned = 0.00144718 Jy ! Component: 1850 - total flux cleaned = 0.00144731 Jy ! Component: 1900 - total flux cleaned = 0.00147078 Jy ! Component: 1950 - total flux cleaned = 0.00137698 Jy ! Component: 2000 - total flux cleaned = 0.00149374 Jy ! Total flux subtracted in 2048 components = 0.0015165 Jy ! Clean residual min=-0.001466 max=0.001476 Jy/beam ! Clean residual mean=0.000001 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.16396 Jy keep ! Adding 144 model components to the UV plane model. ! The established model now contains 264 components and 0.16396 Jy ![Exited script file: muppet] wmap "J1058-0309_X_2004_05_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9846 x 2.25 at 0.5874 degrees (North through East) ! Clean map min=-0.0020486 max=0.070561 Jy/beam ! Writing clean map to FITS file: J1058-0309_X_2004_05_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0705608 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000462221 device "J1058-0309_X_2004_05_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J1058-0309_X_2004_05_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.9652 1.9652 3.9304 7.86081 15.7216 31.4432 62.8864 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.07 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9846 x 2.25 at 0.5874 degrees (North through East) ! Clean map min=-0.0020486 max=0.070561 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1058-0309_X_2004_05_08_yyk\_map.gif/gif" ! Attempting to open device: 'J1058-0309_X_2004_05_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1058-0309_X_2004_05_08_yyk_uvs.log closed on Wed Dec 7 00:18:42 2005