! Started logfile: J1051-3138_S_2004_05_08_yyk_uvs.log on Wed Dec 7 00:18:08 2005 obs J1051-3138_S_2004_05_08_yyk_uve.fits ! Reading UV FITS file: J1051-3138_S_2004_05_08_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.905556 visibilities/baseline/integration-bin. ! Found source: J1051-3138 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1432 lines of history. ! ! Reading 652 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1051-3138_S_2004_05_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.599558 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.449711Jy sigma=6.021415 ! Fit after self-cal, rms=0.449664Jy sigma=6.019919 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.405 mas, bmaj=7.244 mas, bpa=-6.369 degrees ! Estimated noise=2.8204 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.482066 Jy ! Component: 100 - total flux cleaned = 0.600447 Jy ! Total flux subtracted in 100 components = 0.600447 Jy ! Clean residual min=-0.021171 max=0.036765 Jy/beam ! Clean residual mean=-0.000492 rms=0.007344 Jy/beam ! Combined flux in latest and established models = 0.600448 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.600448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120911Jy sigma=1.623059 ! Fit after self-cal, rms=0.120814Jy sigma=1.622372 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.034 mas, bmaj=8.342 mas, bpa=-5.415 degrees ! Estimated noise=2.13172 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0665348 Jy ! Component: 100 - total flux cleaned = 0.0933804 Jy ! Component: 150 - total flux cleaned = 0.104803 Jy ! Component: 200 - total flux cleaned = 0.106651 Jy ! Total flux subtracted in 200 components = 0.106651 Jy ! Clean residual min=-0.014465 max=0.013747 Jy/beam ! Clean residual mean=-0.000538 rms=0.003921 Jy/beam ! Combined flux in latest and established models = 0.707099 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 50 components and 0.707099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098240Jy sigma=1.235573 ! Fit after self-cal, rms=0.098154Jy sigma=1.235092 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01213 ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.02 HN 1.09 KP 0.95 ! LA 1.07 MK 1.00 NL 1.00 OV 0.94 ! PT 0.99 SC 0.93 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.982554 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 1.12 KP 1.00 ! LA 0.94 MK 1.02 NL 1.12 OV 1.02 ! PT 1.04 SC 1.01 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.098154Jy sigma=1.235092 ! Fit after self-cal, rms=0.089591Jy sigma=1.117387 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089591Jy sigma=1.117387 ! Fit after self-cal, rms=0.089595Jy sigma=1.117369 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.039 mas, bmaj=8.303 mas, bpa=-4.851 degrees ! Estimated noise=2.1214 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00033763 Jy ! Component: 100 - total flux cleaned = -0.000169917 Jy ! Component: 150 - total flux cleaned = 8.51969e-05 Jy ! Component: 200 - total flux cleaned = 0.000191475 Jy ! Total flux subtracted in 200 components = 0.000191475 Jy ! Clean residual min=-0.010351 max=0.010984 Jy/beam ! Clean residual mean=-0.000285 rms=0.002931 Jy/beam ! Combined flux in latest and established models = 0.70729 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 66 components and 0.70729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088996Jy sigma=1.109713 ! Fit after self-cal, rms=0.088979Jy sigma=1.109675 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088979Jy sigma=1.109675 ! Fit after self-cal, rms=0.087505Jy sigma=1.086221 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00046055 Jy ! Component: 100 - total flux cleaned = 0.000688361 Jy ! Component: 150 - total flux cleaned = 0.000828661 Jy ! Component: 200 - total flux cleaned = 0.00103288 Jy ! Total flux subtracted in 200 components = 0.00103288 Jy ! Clean residual min=-0.010072 max=0.011160 Jy/beam ! Clean residual mean=-0.000282 rms=0.002891 Jy/beam ! Combined flux in latest and established models = 0.708323 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 68 components and 0.708323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087419Jy sigma=1.084965 ! Fit after self-cal, rms=0.087362Jy sigma=1.083411 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.039 x 8.303 at -4.851 degrees (North through East) ! Clean map min=-0.0097048 max=0.55487 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087362Jy sigma=1.083411 ! Fit after self-cal, rms=0.086140Jy sigma=1.064124 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086140Jy sigma=1.064124 ! Fit after self-cal, rms=0.086153Jy sigma=1.063997 ! Inverting map and beam ! Estimated beam: bmin=3.024 mas, bmaj=8.261 mas, bpa=-4.597 degrees ! Estimated noise=2.11376 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000448886 Jy ! Component: 100 - total flux cleaned = 0.000653365 Jy ! Component: 150 - total flux cleaned = 0.000815338 Jy ! Component: 200 - total flux cleaned = 0.000949127 Jy ! Total flux subtracted in 200 components = 0.000949127 Jy ! Clean residual min=-0.010230 max=0.011653 Jy/beam ! Clean residual mean=-0.000280 rms=0.002868 Jy/beam ! Combined flux in latest and established models = 0.709272 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 68 components and 0.709272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085916Jy sigma=1.061304 ! Fit after self-cal, rms=0.085915Jy sigma=1.061259 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085915Jy sigma=1.061259 ! Fit after self-cal, rms=0.080448Jy sigma=0.993943 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080448Jy sigma=0.993943 ! Fit after self-cal, rms=0.080449Jy sigma=0.993899 ! Inverting map and beam ! Estimated beam: bmin=3.02 mas, bmaj=8.255 mas, bpa=-4.743 degrees ! Estimated noise=2.11182 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000620599 Jy ! Component: 100 - total flux cleaned = 0.00069049 Jy ! Component: 150 - total flux cleaned = 0.000653626 Jy ! Component: 200 - total flux cleaned = 0.000653967 Jy ! Total flux subtracted in 200 components = 0.000653967 Jy ! Clean residual min=-0.009397 max=0.007756 Jy/beam ! Clean residual mean=-0.000165 rms=0.002509 Jy/beam ! Combined flux in latest and established models = 0.709926 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 76 components and 0.709926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080392Jy sigma=0.993047 ! Fit after self-cal, rms=0.080398Jy sigma=0.993001 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.186 mas, bmaj=23.63 mas, bpa=-0.927 degrees ! Estimated noise=2.75831 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167681 Jy ! Component: 100 - total flux cleaned = 0.00167258 Jy ! Component: 150 - total flux cleaned = 0.00167016 Jy ! Component: 200 - total flux cleaned = 0.00172609 Jy ! Total flux subtracted in 200 components = 0.00172609 Jy ! Clean residual min=-0.010003 max=0.009178 Jy/beam ! Clean residual mean=-0.000312 rms=0.003450 Jy/beam ! Combined flux in latest and established models = 0.711652 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 82 components and 0.711652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080513Jy sigma=0.994203 ! Fit after self-cal, rms=0.080448Jy sigma=0.993392 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.408 mas, bmaj=7.232 mas, bpa=-6.147 degrees ! Estimated noise=2.80932 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.479939 Jy ! Component: 100 - total flux cleaned = 0.597724 Jy ! Component: 150 - total flux cleaned = 0.648392 Jy ! Component: 200 - total flux cleaned = 0.672984 Jy ! Total flux subtracted in 200 components = 0.672984 Jy ! Clean residual min=-0.011109 max=0.015194 Jy/beam ! Clean residual mean=-0.000118 rms=0.003230 Jy/beam ! Combined flux in latest and established models = 0.672984 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.672984 Jy ! Inverting map and beam ! Estimated beam: bmin=3.02 mas, bmaj=8.255 mas, bpa=-4.743 degrees ! Estimated noise=2.11182 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, -8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0221125 Jy ! Component: 100 - total flux cleaned = 0.0321206 Jy ! Component: 150 - total flux cleaned = 0.0346819 Jy ! Component: 200 - total flux cleaned = 0.0353665 Jy ! Total flux subtracted in 200 components = 0.0353665 Jy ! Clean residual min=-0.009170 max=0.007347 Jy/beam ! Clean residual mean=-0.000183 rms=0.002382 Jy/beam ! Combined flux in latest and established models = 0.70835 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 86 components and 0.70835 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.186 mas, bmaj=23.63 mas, bpa=-0.927 degrees ! Estimated noise=2.75831 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00449266 Jy ! Component: 100 - total flux cleaned = 0.00476826 Jy ! Component: 150 - total flux cleaned = 0.00484688 Jy ! Component: 200 - total flux cleaned = 0.00499251 Jy ! Total flux subtracted in 200 components = 0.00499251 Jy ! Clean residual min=-0.010069 max=0.008405 Jy/beam ! Clean residual mean=-0.000327 rms=0.003127 Jy/beam ! Combined flux in latest and established models = 0.713343 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 95 components and 0.713343 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.02 mas, bmaj=8.255 mas, bpa=-4.743 degrees ! Estimated noise=2.11182 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00140943 Jy ! Component: 100 - total flux cleaned = -0.00176559 Jy ! Component: 150 - total flux cleaned = -0.0019751 Jy ! Component: 200 - total flux cleaned = -0.00188068 Jy ! Total flux subtracted in 200 components = -0.00188068 Jy ! Clean residual min=-0.008805 max=0.007244 Jy/beam ! Clean residual mean=-0.000174 rms=0.002278 Jy/beam ! Combined flux in latest and established models = 0.711462 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 106 components and 0.711462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078880Jy sigma=0.979803 ! Fit after self-cal, rms=0.078804Jy sigma=0.978823 wmodel J1051-3138_S_2004_05_08_yyk\_map.mod ! Writing 106 model components to file: J1051-3138_S_2004_05_08_yyk_map.mod wobs J1051-3138_S_2004_05_08_yyk\_uvs.fits ! Writing UV FITS file: J1051-3138_S_2004_05_08_yyk_uvs.fits wwins J1051-3138_S_2004_05_08_yyk\_map.win ! wwins: Wrote 2 windows to J1051-3138_S_2004_05_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00348279 Jy ! Component: 100 - total flux cleaned = -0.00447627 Jy ! Component: 150 - total flux cleaned = -0.00470776 Jy ! Component: 200 - total flux cleaned = -0.00470855 Jy ! Component: 250 - total flux cleaned = -0.00460691 Jy ! Component: 300 - total flux cleaned = -0.00470007 Jy ! Component: 350 - total flux cleaned = -0.00497383 Jy ! Component: 400 - total flux cleaned = -0.00541324 Jy ! Component: 450 - total flux cleaned = -0.00566978 Jy ! Component: 500 - total flux cleaned = -0.00632886 Jy ! Component: 550 - total flux cleaned = -0.00681003 Jy ! Component: 600 - total flux cleaned = -0.00728133 Jy ! Component: 650 - total flux cleaned = -0.00796402 Jy ! Component: 700 - total flux cleaned = -0.00855452 Jy ! Component: 750 - total flux cleaned = -0.00905636 Jy ! Component: 800 - total flux cleaned = -0.00947712 Jy ! Component: 850 - total flux cleaned = -0.00975218 Jy ! Component: 900 - total flux cleaned = -0.0102874 Jy ! Component: 950 - total flux cleaned = -0.0107432 Jy ! Component: 1000 - total flux cleaned = -0.010933 Jy ! Component: 1050 - total flux cleaned = -0.0111831 Jy ! Component: 1100 - total flux cleaned = -0.0114883 Jy ! Component: 1150 - total flux cleaned = -0.011846 Jy ! Component: 1200 - total flux cleaned = -0.0120226 Jy ! Component: 1250 - total flux cleaned = -0.0122514 Jy ! Component: 1300 - total flux cleaned = -0.0123637 Jy ! Component: 1350 - total flux cleaned = -0.0126374 Jy ! Component: 1400 - total flux cleaned = -0.0126907 Jy ! Component: 1450 - total flux cleaned = -0.0127965 Jy ! Component: 1500 - total flux cleaned = -0.0129532 Jy ! Component: 1550 - total flux cleaned = -0.0131074 Jy ! Component: 1600 - total flux cleaned = -0.0132092 Jy ! Component: 1650 - total flux cleaned = -0.0134555 Jy ! Component: 1700 - total flux cleaned = -0.0136003 Jy ! Component: 1750 - total flux cleaned = -0.0138856 Jy ! Component: 1800 - total flux cleaned = -0.0138856 Jy ! Component: 1850 - total flux cleaned = -0.0142539 Jy ! Component: 1900 - total flux cleaned = -0.0142988 Jy ! Component: 1950 - total flux cleaned = -0.01461 Jy ! Component: 2000 - total flux cleaned = -0.0146093 Jy ! Total flux subtracted in 2048 components = -0.0146536 Jy ! Clean residual min=-0.002789 max=0.002552 Jy/beam ! Clean residual mean=-0.000070 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.696808 Jy keep ! Adding 132 model components to the UV plane model. ! The established model now contains 238 components and 0.696808 Jy ![Exited script file: muppet] wmap "J1051-3138_S_2004_05_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.02 x 8.255 at -4.743 degrees (North through East) ! Clean map min=-0.0056197 max=0.55841 Jy/beam ! Writing clean map to FITS file: J1051-3138_S_2004_05_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.558414 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000883938 device "J1051-3138_S_2004_05_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J1051-3138_S_2004_05_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.474883 0.474883 0.949767 1.89953 3.79907 7.59813 15.1963 30.3925 60.7851 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0026 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.558 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.02 x 8.255 at -4.743 degrees (North through East) ! Clean map min=-0.0056197 max=0.55841 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1051-3138_S_2004_05_08_yyk\_map.gif/gif" ! Attempting to open device: 'J1051-3138_S_2004_05_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1051-3138_S_2004_05_08_yyk_uvs.log closed on Wed Dec 7 00:18:12 2005