! Started logfile: J1038-4325_S_2004_05_08_yyk_uvs.log on Wed Dec 7 00:17:33 2005 obs J1038-4325_S_2004_05_08_yyk_uve.fits ! Reading UV FITS file: J1038-4325_S_2004_05_08_yyk_uve.fits ! AN table 1: 7 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.6 visibilities/baseline/integration-bin. ! Found source: J1038-4325 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1438 lines of history. ! ! Reading 756 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1038-4325_S_2004_05_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.328395 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.696188Jy sigma=9.186435 ! Fit after self-cal, rms=0.695924Jy sigma=9.184181 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.009 mas, bmaj=6.837 mas, bpa=-5.351 degrees ! Estimated noise=3.82433 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.252942 Jy ! Component: 100 - total flux cleaned = 0.307478 Jy ! Total flux subtracted in 100 components = 0.307478 Jy ! Clean residual min=-0.014256 max=0.018621 Jy/beam ! Clean residual mean=0.000321 rms=0.005314 Jy/beam ! Combined flux in latest and established models = 0.307478 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.307478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097017Jy sigma=1.185671 ! Fit after self-cal, rms=0.097001Jy sigma=1.185564 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.81 mas, bmaj=7.825 mas, bpa=-5.204 degrees ! Estimated noise=2.3398 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0360821 Jy ! Component: 100 - total flux cleaned = 0.0488766 Jy ! Component: 150 - total flux cleaned = 0.0534252 Jy ! Component: 200 - total flux cleaned = 0.0546973 Jy ! Total flux subtracted in 200 components = 0.0546973 Jy ! Clean residual min=-0.009223 max=0.009827 Jy/beam ! Clean residual mean=-0.000097 rms=0.003147 Jy/beam ! Combined flux in latest and established models = 0.362175 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 32 components and 0.362175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089066Jy sigma=1.059710 ! Fit after self-cal, rms=0.089009Jy sigma=1.059473 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00686 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 0.95 ! LA 1.07 MK 0.96 NL 1.00* OV 1.03 ! PT 1.01 SC 0.92 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.989698 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 1.00 ! LA 1.05 MK 1.04 NL 1.00* OV 1.05 ! PT 0.97 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00252 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.90 HN 1.00* KP 1.02 ! LA 0.92 MK 1.02 NL 1.00* OV 1.05 ! PT 1.05 SC 1.03 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.00156 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.00* KP 0.91 ! LA 1.00* MK 1.00 NL 1.00* OV 0.91 ! PT 1.05 SC 1.14 ! ! ! Fit before self-cal, rms=0.089009Jy sigma=1.059473 ! Fit after self-cal, rms=0.085759Jy sigma=1.011313 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085759Jy sigma=1.011313 ! Fit after self-cal, rms=0.085743Jy sigma=1.011280 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.827 mas, bmaj=7.827 mas, bpa=-5.188 degrees ! Estimated noise=2.33352 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000261151 Jy ! Component: 100 - total flux cleaned = 0.000371299 Jy ! Component: 150 - total flux cleaned = 0.000406896 Jy ! Component: 200 - total flux cleaned = 0.000442002 Jy ! Total flux subtracted in 200 components = 0.000442002 Jy ! Clean residual min=-0.007652 max=0.009152 Jy/beam ! Clean residual mean=0.000159 rms=0.002630 Jy/beam ! Combined flux in latest and established models = 0.362617 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 0.362617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085733Jy sigma=1.010994 ! Fit after self-cal, rms=0.085724Jy sigma=1.010974 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085724Jy sigma=1.010974 ! Fit after self-cal, rms=0.079270Jy sigma=0.937722 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100192 Jy ! Component: 100 - total flux cleaned = 0.00111069 Jy ! Component: 150 - total flux cleaned = 0.00114481 Jy ! Component: 200 - total flux cleaned = 0.00117584 Jy ! Total flux subtracted in 200 components = 0.00117584 Jy ! Clean residual min=-0.007560 max=0.008887 Jy/beam ! Clean residual mean=0.000173 rms=0.002555 Jy/beam ! Combined flux in latest and established models = 0.363793 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 43 components and 0.363793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079255Jy sigma=0.937346 ! Fit after self-cal, rms=0.078850Jy sigma=0.931398 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.827 x 7.827 at -5.188 degrees (North through East) ! Clean map min=-0.0071126 max=0.30912 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078850Jy sigma=0.931398 ! Fit after self-cal, rms=0.078868Jy sigma=0.929638 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078868Jy sigma=0.929638 ! Fit after self-cal, rms=0.078924Jy sigma=0.928925 ! Inverting map and beam ! Estimated beam: bmin=2.824 mas, bmaj=7.821 mas, bpa=-5.208 degrees ! Estimated noise=2.33136 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000142371 Jy ! Component: 100 - total flux cleaned = 0.000110779 Jy ! Component: 150 - total flux cleaned = 0.000110121 Jy ! Component: 200 - total flux cleaned = 0.000138673 Jy ! Total flux subtracted in 200 components = 0.000138673 Jy ! Clean residual min=-0.007331 max=0.008673 Jy/beam ! Clean residual mean=0.000172 rms=0.002525 Jy/beam ! Combined flux in latest and established models = 0.363932 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 46 components and 0.363932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078920Jy sigma=0.928691 ! Fit after self-cal, rms=0.078970Jy sigma=0.928558 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078970Jy sigma=0.928558 ! Fit after self-cal, rms=0.077453Jy sigma=0.903611 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077453Jy sigma=0.903611 ! Fit after self-cal, rms=0.077473Jy sigma=0.903554 ! Inverting map and beam ! Estimated beam: bmin=2.822 mas, bmaj=7.811 mas, bpa=-5.582 degrees ! Estimated noise=2.32181 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -3.91883e-05 Jy ! Component: 100 - total flux cleaned = -0.000174114 Jy ! Component: 150 - total flux cleaned = -0.000351109 Jy ! Component: 200 - total flux cleaned = -0.000382798 Jy ! Total flux subtracted in 200 components = -0.000382798 Jy ! Clean residual min=-0.007036 max=0.008534 Jy/beam ! Clean residual mean=0.000101 rms=0.002492 Jy/beam ! Combined flux in latest and established models = 0.363549 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 57 components and 0.363549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077494Jy sigma=0.902916 ! Fit after self-cal, rms=0.077503Jy sigma=0.902875 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.47 mas, bmaj=32.12 mas, bpa=-2.952 degrees ! Estimated noise=3.16735 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000160112 Jy ! Component: 100 - total flux cleaned = 0.000158942 Jy ! Component: 150 - total flux cleaned = 0.000157265 Jy ! Component: 200 - total flux cleaned = 0.000155449 Jy ! Total flux subtracted in 200 components = 0.000155449 Jy ! Clean residual min=-0.008617 max=0.009590 Jy/beam ! Clean residual mean=0.000197 rms=0.003979 Jy/beam ! Combined flux in latest and established models = 0.363705 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 60 components and 0.363705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077629Jy sigma=0.903373 ! Fit after self-cal, rms=0.077625Jy sigma=0.902919 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.006 mas, bmaj=6.833 mas, bpa=-5.518 degrees ! Estimated noise=3.77312 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.251377 Jy ! Component: 100 - total flux cleaned = 0.306638 Jy ! Component: 150 - total flux cleaned = 0.329959 Jy ! Component: 200 - total flux cleaned = 0.343501 Jy ! Total flux subtracted in 200 components = 0.343501 Jy ! Clean residual min=-0.008983 max=0.010968 Jy/beam ! Clean residual mean=0.000130 rms=0.003173 Jy/beam ! Combined flux in latest and established models = 0.343501 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.343501 Jy ! Inverting map and beam ! Estimated beam: bmin=2.822 mas, bmaj=7.811 mas, bpa=-5.582 degrees ! Estimated noise=2.32181 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134923 Jy ! Component: 100 - total flux cleaned = 0.0182818 Jy ! Component: 150 - total flux cleaned = 0.0197244 Jy ! Component: 200 - total flux cleaned = 0.0198681 Jy ! Total flux subtracted in 200 components = 0.0198681 Jy ! Clean residual min=-0.007086 max=0.009042 Jy/beam ! Clean residual mean=0.000100 rms=0.002560 Jy/beam ! Combined flux in latest and established models = 0.363369 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 44 components and 0.363369 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.47 mas, bmaj=32.12 mas, bpa=-2.952 degrees ! Estimated noise=3.16735 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000415764 Jy ! Component: 100 - total flux cleaned = 0.000418126 Jy ! Component: 150 - total flux cleaned = 0.000420197 Jy ! Component: 200 - total flux cleaned = 0.000423154 Jy ! Total flux subtracted in 200 components = 0.000423154 Jy ! Clean residual min=-0.008541 max=0.009663 Jy/beam ! Clean residual mean=0.000196 rms=0.004013 Jy/beam ! Combined flux in latest and established models = 0.363792 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 49 components and 0.363792 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.822 mas, bmaj=7.811 mas, bpa=-5.582 degrees ! Estimated noise=2.32181 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000387463 Jy ! Component: 100 - total flux cleaned = -0.000265648 Jy ! Component: 150 - total flux cleaned = -0.000222825 Jy ! Component: 200 - total flux cleaned = -0.000221097 Jy ! Total flux subtracted in 200 components = -0.000221097 Jy ! Clean residual min=-0.007129 max=0.008653 Jy/beam ! Clean residual mean=0.000100 rms=0.002489 Jy/beam ! Combined flux in latest and established models = 0.363571 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 62 components and 0.363571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077591Jy sigma=0.903524 ! Fit after self-cal, rms=0.077583Jy sigma=0.903395 wmodel J1038-4325_S_2004_05_08_yyk\_map.mod ! Writing 62 model components to file: J1038-4325_S_2004_05_08_yyk_map.mod wobs J1038-4325_S_2004_05_08_yyk\_uvs.fits ! Writing UV FITS file: J1038-4325_S_2004_05_08_yyk_uvs.fits wwins J1038-4325_S_2004_05_08_yyk\_map.win ! wwins: Wrote 1 windows to J1038-4325_S_2004_05_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00277848 Jy ! Component: 100 - total flux cleaned = 0.0037044 Jy ! Component: 150 - total flux cleaned = 0.00422243 Jy ! Component: 200 - total flux cleaned = 0.00497502 Jy ! Component: 250 - total flux cleaned = 0.00532903 Jy ! Component: 300 - total flux cleaned = 0.0055758 Jy ! Component: 350 - total flux cleaned = 0.00580605 Jy ! Component: 400 - total flux cleaned = 0.00580334 Jy ! Component: 450 - total flux cleaned = 0.00566055 Jy ! Component: 500 - total flux cleaned = 0.00552187 Jy ! Component: 550 - total flux cleaned = 0.00538837 Jy ! Component: 600 - total flux cleaned = 0.00532324 Jy ! Component: 650 - total flux cleaned = 0.00513503 Jy ! Component: 700 - total flux cleaned = 0.00501383 Jy ! Component: 750 - total flux cleaned = 0.0048963 Jy ! Component: 800 - total flux cleaned = 0.0047825 Jy ! Component: 850 - total flux cleaned = 0.00489331 Jy ! Component: 900 - total flux cleaned = 0.00494784 Jy ! Component: 950 - total flux cleaned = 0.00505496 Jy ! Component: 1000 - total flux cleaned = 0.00515982 Jy ! Component: 1050 - total flux cleaned = 0.00526238 Jy ! Component: 1100 - total flux cleaned = 0.00536477 Jy ! Component: 1150 - total flux cleaned = 0.00546568 Jy ! Component: 1200 - total flux cleaned = 0.00571547 Jy ! Component: 1250 - total flux cleaned = 0.0058644 Jy ! Component: 1300 - total flux cleaned = 0.00610999 Jy ! Component: 1350 - total flux cleaned = 0.00625666 Jy ! Component: 1400 - total flux cleaned = 0.00620728 Jy ! Component: 1450 - total flux cleaned = 0.00625637 Jy ! Component: 1500 - total flux cleaned = 0.00625681 Jy ! Component: 1550 - total flux cleaned = 0.00625668 Jy ! Component: 1600 - total flux cleaned = 0.00625639 Jy ! Component: 1650 - total flux cleaned = 0.00625597 Jy ! Component: 1700 - total flux cleaned = 0.00630803 Jy ! Component: 1750 - total flux cleaned = 0.00625559 Jy ! Component: 1800 - total flux cleaned = 0.00625539 Jy ! Component: 1850 - total flux cleaned = 0.00620164 Jy ! Component: 1900 - total flux cleaned = 0.00620202 Jy ! Component: 1950 - total flux cleaned = 0.00625689 Jy ! Component: 2000 - total flux cleaned = 0.00636909 Jy ! Total flux subtracted in 2048 components = 0.00636928 Jy ! Clean residual min=-0.003771 max=0.003556 Jy/beam ! Clean residual mean=-0.000024 rms=0.001058 Jy/beam ! Combined flux in latest and established models = 0.36994 Jy keep ! Adding 107 model components to the UV plane model. ! The established model now contains 169 components and 0.36994 Jy ![Exited script file: muppet] wmap "J1038-4325_S_2004_05_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.822 x 7.811 at -5.582 degrees (North through East) ! Clean map min=-0.0049152 max=0.30593 Jy/beam ! Writing clean map to FITS file: J1038-4325_S_2004_05_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.305927 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00113936 device "J1038-4325_S_2004_05_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J1038-4325_S_2004_05_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.11729 1.11729 2.23457 4.46915 8.93829 17.8766 35.7532 71.5063 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0034 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.305 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.822 x 7.811 at -5.582 degrees (North through East) ! Clean map min=-0.0049152 max=0.30593 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1038-4325_S_2004_05_08_yyk\_map.gif/gif" ! Attempting to open device: 'J1038-4325_S_2004_05_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1038-4325_S_2004_05_08_yyk_uvs.log closed on Wed Dec 7 00:17:38 2005