! Started logfile: J1024-3234_X_2004_05_08_yyk_uvs.log on Wed Dec 7 01:08:57 2005 obs J1024-3234_X_2004_05_08_yyk_uve.fits ! Reading UV FITS file: J1024-3234_X_2004_05_08_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1024-3234 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1432 lines of history. ! ! Reading 720 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1024-3234_X_2004_05_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.26675 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.755332Jy sigma=11.349305 ! Fit after self-cal, rms=0.755302Jy sigma=11.347564 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.667 mas, bmaj=1.879 mas, bpa=-5.61 degrees ! Estimated noise=2.42429 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.210108 Jy ! Component: 100 - total flux cleaned = 0.252803 Jy ! Total flux subtracted in 100 components = 0.252803 Jy ! Clean residual min=-0.010212 max=0.018821 Jy/beam ! Clean residual mean=-0.000046 rms=0.003477 Jy/beam ! Combined flux in latest and established models = 0.252803 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.252803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086927Jy sigma=1.155229 ! Fit after self-cal, rms=0.086900Jy sigma=1.154588 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8263 mas, bmaj=2.24 mas, bpa=-2.885 degrees ! Estimated noise=1.72574 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0270637 Jy ! Component: 100 - total flux cleaned = 0.0375826 Jy ! Component: 150 - total flux cleaned = 0.0413638 Jy ! Component: 200 - total flux cleaned = 0.0419725 Jy ! Total flux subtracted in 200 components = 0.0419725 Jy ! Clean residual min=-0.008606 max=0.013006 Jy/beam ! Clean residual mean=0.000029 rms=0.002936 Jy/beam ! Combined flux in latest and established models = 0.294776 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 22 components and 0.294776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083068Jy sigma=1.055713 ! Fit after self-cal, rms=0.083066Jy sigma=1.055579 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.9953 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.14 KP 0.91 ! LA 0.94 MK 1.00 NL 1.04 OV 0.99 ! PT 1.04 SC 0.99 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.986142 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.04 HN 1.01 KP 0.90 ! LA 0.94 MK 1.01 NL 1.00 OV 1.08 ! PT 1.09 SC 1.01 ! ! ! Fit before self-cal, rms=0.083066Jy sigma=1.055579 ! Fit after self-cal, rms=0.082394Jy sigma=1.038178 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082394Jy sigma=1.038178 ! Fit after self-cal, rms=0.082393Jy sigma=1.038160 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8275 mas, bmaj=2.24 mas, bpa=-2.846 degrees ! Estimated noise=1.71697 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00123811 Jy ! Component: 100 - total flux cleaned = -0.00106223 Jy ! Component: 150 - total flux cleaned = -0.00098242 Jy ! Component: 200 - total flux cleaned = -0.000760515 Jy ! Total flux subtracted in 200 components = -0.000760515 Jy ! Clean residual min=-0.008539 max=0.012871 Jy/beam ! Clean residual mean=0.000044 rms=0.002733 Jy/beam ! Combined flux in latest and established models = 0.294015 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 23 components and 0.294015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082181Jy sigma=1.035845 ! Fit after self-cal, rms=0.082179Jy sigma=1.035782 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082179Jy sigma=1.035782 ! Fit after self-cal, rms=0.080491Jy sigma=1.006322 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.8, 5.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141705 Jy ! Component: 100 - total flux cleaned = 0.0196055 Jy ! Component: 150 - total flux cleaned = 0.0225165 Jy ! Component: 200 - total flux cleaned = 0.023288 Jy ! Total flux subtracted in 200 components = 0.023288 Jy ! Clean residual min=-0.007561 max=0.009395 Jy/beam ! Clean residual mean=0.000057 rms=0.002060 Jy/beam ! Combined flux in latest and established models = 0.317303 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 48 components and 0.317303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079049Jy sigma=0.974650 ! Fit after self-cal, rms=0.078908Jy sigma=0.970731 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8275 x 2.24 at -2.846 degrees (North through East) ! Clean map min=-0.0069391 max=0.23659 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078908Jy sigma=0.970731 ! Fit after self-cal, rms=0.078801Jy sigma=0.967754 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078801Jy sigma=0.967754 ! Fit after self-cal, rms=0.078792Jy sigma=0.967591 ! Inverting map and beam ! Estimated beam: bmin=0.8258 mas, bmaj=2.235 mas, bpa=-2.943 degrees ! Estimated noise=1.72433 mJy/beam. ! Added new window around map position (11.2, -20.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0090345 Jy ! Component: 100 - total flux cleaned = 0.0115737 Jy ! Component: 150 - total flux cleaned = 0.012263 Jy ! Component: 200 - total flux cleaned = 0.0126249 Jy ! Total flux subtracted in 200 components = 0.0126249 Jy ! Clean residual min=-0.006349 max=0.007491 Jy/beam ! Clean residual mean=0.000081 rms=0.001773 Jy/beam ! Combined flux in latest and established models = 0.329928 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 65 components and 0.329928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077842Jy sigma=0.951823 ! Fit after self-cal, rms=0.077764Jy sigma=0.951061 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077764Jy sigma=0.951061 ! Fit after self-cal, rms=0.077894Jy sigma=0.938229 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077894Jy sigma=0.938229 ! Fit after self-cal, rms=0.077905Jy sigma=0.938178 ! Inverting map and beam ! Estimated beam: bmin=0.8345 mas, bmaj=2.256 mas, bpa=-2.91 degrees ! Estimated noise=1.72837 mJy/beam. ! Added new window around map position (-22.6, -13.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00726884 Jy ! Component: 100 - total flux cleaned = 0.00818596 Jy ! Component: 150 - total flux cleaned = 0.00830047 Jy ! Component: 200 - total flux cleaned = 0.00850675 Jy ! Total flux subtracted in 200 components = 0.00850675 Jy ! Clean residual min=-0.005643 max=0.005877 Jy/beam ! Clean residual mean=0.000064 rms=0.001490 Jy/beam ! Combined flux in latest and established models = 0.338435 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 84 components and 0.338435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077303Jy sigma=0.927606 ! Fit after self-cal, rms=0.077300Jy sigma=0.927225 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.462 mas, bmaj=7.379 mas, bpa=0.3278 degrees ! Estimated noise=2.24166 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172728 Jy ! Component: 100 - total flux cleaned = 0.00180474 Jy ! Component: 150 - total flux cleaned = 0.00180203 Jy ! Component: 200 - total flux cleaned = 0.0017424 Jy ! Total flux subtracted in 200 components = 0.0017424 Jy ! Clean residual min=-0.006661 max=0.006502 Jy/beam ! Clean residual mean=0.000093 rms=0.001926 Jy/beam ! Combined flux in latest and established models = 0.340177 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 98 components and 0.340177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077256Jy sigma=0.926603 ! Fit after self-cal, rms=0.077262Jy sigma=0.926502 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6679 mas, bmaj=1.879 mas, bpa=-5.64 degrees ! Estimated noise=2.45939 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.213473 Jy ! Component: 100 - total flux cleaned = 0.256169 Jy ! Component: 150 - total flux cleaned = 0.276252 Jy ! Component: 200 - total flux cleaned = 0.290077 Jy ! Total flux subtracted in 200 components = 0.290077 Jy ! Clean residual min=-0.008389 max=0.010701 Jy/beam ! Clean residual mean=-0.000007 rms=0.002507 Jy/beam ! Combined flux in latest and established models = 0.290077 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.290077 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8345 mas, bmaj=2.256 mas, bpa=-2.91 degrees ! Estimated noise=1.72837 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9.2, 23.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0161389 Jy ! Component: 100 - total flux cleaned = 0.0261817 Jy ! Component: 150 - total flux cleaned = 0.0335549 Jy ! Component: 200 - total flux cleaned = 0.0391063 Jy ! Total flux subtracted in 200 components = 0.0391063 Jy ! Clean residual min=-0.005892 max=0.006368 Jy/beam ! Clean residual mean=0.000048 rms=0.001666 Jy/beam ! Combined flux in latest and established models = 0.329184 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 58 components and 0.329184 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.462 mas, bmaj=7.379 mas, bpa=0.3278 degrees ! Estimated noise=2.24166 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00579837 Jy ! Component: 100 - total flux cleaned = 0.00724506 Jy ! Component: 150 - total flux cleaned = 0.00781144 Jy ! Component: 200 - total flux cleaned = 0.00828425 Jy ! Total flux subtracted in 200 components = 0.00828425 Jy ! Clean residual min=-0.006247 max=0.006542 Jy/beam ! Clean residual mean=0.000081 rms=0.002005 Jy/beam ! Combined flux in latest and established models = 0.337468 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 77 components and 0.337468 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8345 mas, bmaj=2.256 mas, bpa=-2.91 degrees ! Estimated noise=1.72837 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117352 Jy ! Component: 100 - total flux cleaned = 0.00167353 Jy ! Component: 150 - total flux cleaned = 0.00167332 Jy ! Component: 200 - total flux cleaned = 0.00157116 Jy ! Total flux subtracted in 200 components = 0.00157116 Jy ! Clean residual min=-0.004929 max=0.006065 Jy/beam ! Clean residual mean=0.000044 rms=0.001465 Jy/beam ! Combined flux in latest and established models = 0.339039 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 102 components and 0.339039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076917Jy sigma=0.924647 ! Fit after self-cal, rms=0.076805Jy sigma=0.923252 wmodel J1024-3234_X_2004_05_08_yyk\_map.mod ! Writing 102 model components to file: J1024-3234_X_2004_05_08_yyk_map.mod wobs J1024-3234_X_2004_05_08_yyk\_uvs.fits ! Writing UV FITS file: J1024-3234_X_2004_05_08_yyk_uvs.fits wwins J1024-3234_X_2004_05_08_yyk\_map.win ! wwins: Wrote 5 windows to J1024-3234_X_2004_05_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00224582 Jy ! Component: 100 - total flux cleaned = 0.00242176 Jy ! Component: 150 - total flux cleaned = 0.00258871 Jy ! Component: 200 - total flux cleaned = 0.00258748 Jy ! Component: 250 - total flux cleaned = 0.00281073 Jy ! Component: 300 - total flux cleaned = 0.00309676 Jy ! Component: 350 - total flux cleaned = 0.00370612 Jy ! Component: 400 - total flux cleaned = 0.00383604 Jy ! Component: 450 - total flux cleaned = 0.00396112 Jy ! Component: 500 - total flux cleaned = 0.00420542 Jy ! Component: 550 - total flux cleaned = 0.0044417 Jy ! Component: 600 - total flux cleaned = 0.00461454 Jy ! Component: 650 - total flux cleaned = 0.00506337 Jy ! Component: 700 - total flux cleaned = 0.00528226 Jy ! Component: 750 - total flux cleaned = 0.00560261 Jy ! Component: 800 - total flux cleaned = 0.00586377 Jy ! Component: 850 - total flux cleaned = 0.00632064 Jy ! Component: 900 - total flux cleaned = 0.00656743 Jy ! Component: 950 - total flux cleaned = 0.00685785 Jy ! Component: 1000 - total flux cleaned = 0.00709378 Jy ! Component: 1050 - total flux cleaned = 0.00723253 Jy ! Component: 1100 - total flux cleaned = 0.00746033 Jy ! Component: 1150 - total flux cleaned = 0.00759493 Jy ! Component: 1200 - total flux cleaned = 0.00781534 Jy ! Component: 1250 - total flux cleaned = 0.00790267 Jy ! Component: 1300 - total flux cleaned = 0.00811787 Jy ! Component: 1350 - total flux cleaned = 0.008203 Jy ! Component: 1400 - total flux cleaned = 0.00836986 Jy ! Component: 1450 - total flux cleaned = 0.00853409 Jy ! Component: 1500 - total flux cleaned = 0.0086155 Jy ! Component: 1550 - total flux cleaned = 0.00869589 Jy ! Component: 1600 - total flux cleaned = 0.00877446 Jy ! Component: 1650 - total flux cleaned = 0.00881308 Jy ! Component: 1700 - total flux cleaned = 0.00889032 Jy ! Component: 1750 - total flux cleaned = 0.008967 Jy ! Component: 1800 - total flux cleaned = 0.00900464 Jy ! Component: 1850 - total flux cleaned = 0.00896692 Jy ! Component: 1900 - total flux cleaned = 0.0090416 Jy ! Component: 1950 - total flux cleaned = 0.0091155 Jy ! Component: 2000 - total flux cleaned = 0.00915248 Jy ! Total flux subtracted in 2048 components = 0.00926234 Jy ! Clean residual min=-0.001990 max=0.002259 Jy/beam ! Clean residual mean=0.000014 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.348301 Jy keep ! Adding 125 model components to the UV plane model. ! The established model now contains 227 components and 0.348301 Jy ![Exited script file: muppet] wmap "J1024-3234_X_2004_05_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8345 x 2.256 at -2.91 degrees (North through East) ! Clean map min=-0.0046431 max=0.23926 Jy/beam ! Writing clean map to FITS file: J1024-3234_X_2004_05_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.239261 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000666299 device "J1024-3234_X_2004_05_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J1024-3234_X_2004_05_08_yyk_map.eps/VPS' loglevs 2*100*3*image_rms/peak_flux ! The new contour levels are: ! -1.6709 1.6709 3.34179 6.68358 13.3672 26.7343 53.4686 print "clev=",int(2*3*image_rms*10000)/10000 ! clev= 0.0039 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.239 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8345 x 2.256 at -2.91 degrees (North through East) ! Clean map min=-0.0046431 max=0.23926 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1024-3234_X_2004_05_08_yyk\_map.gif/gif" ! Attempting to open device: 'J1024-3234_X_2004_05_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1024-3234_X_2004_05_08_yyk_uvs.log closed on Wed Dec 7 01:09:01 2005