! Started logfile: J1024-3234_S_2004_05_08_yyk_uvs.log on Wed Dec 7 00:16:45 2005 obs J1024-3234_S_2004_05_08_yyk_uve.fits ! Reading UV FITS file: J1024-3234_S_2004_05_08_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1024-3234 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1437 lines of history. ! ! Reading 720 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1024-3234_S_2004_05_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.22907 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.830734Jy sigma=10.925896 ! Fit after self-cal, rms=0.829893Jy sigma=10.914673 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.473 mas, bmaj=7.297 mas, bpa=-4.182 degrees ! Estimated noise=3.00782 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.158978 Jy ! Component: 100 - total flux cleaned = 0.217153 Jy ! Total flux subtracted in 100 components = 0.217153 Jy ! Clean residual min=-0.019519 max=0.032074 Jy/beam ! Clean residual mean=-0.000123 rms=0.005728 Jy/beam ! Combined flux in latest and established models = 0.217153 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.217153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116573Jy sigma=1.424730 ! Fit after self-cal, rms=0.116657Jy sigma=1.422951 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=8.758 mas, bpa=-0.236 degrees ! Estimated noise=2.26861 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0491492 Jy ! Component: 100 - total flux cleaned = 0.0659259 Jy ! Component: 150 - total flux cleaned = 0.0704406 Jy ! Component: 200 - total flux cleaned = 0.0712194 Jy ! Total flux subtracted in 200 components = 0.0712194 Jy ! Clean residual min=-0.015703 max=0.021888 Jy/beam ! Clean residual mean=-0.000126 rms=0.005575 Jy/beam ! Combined flux in latest and established models = 0.288373 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 39 components and 0.288373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106822Jy sigma=1.210740 ! Fit after self-cal, rms=0.106824Jy sigma=1.209773 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.106824Jy sigma=1.209773 ! Fit after self-cal, rms=0.106824Jy sigma=1.209773 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106824Jy sigma=1.209773 ! Fit after self-cal, rms=0.106824Jy sigma=1.209774 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=8.758 mas, bpa=-0.236 degrees ! Estimated noise=2.26861 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000679131 Jy ! Component: 100 - total flux cleaned = 0.00124351 Jy ! Component: 150 - total flux cleaned = 0.00158318 Jy ! Component: 200 - total flux cleaned = 0.00205022 Jy ! Total flux subtracted in 200 components = 0.00205022 Jy ! Clean residual min=-0.015621 max=0.021136 Jy/beam ! Clean residual mean=-0.000122 rms=0.005461 Jy/beam ! Combined flux in latest and established models = 0.290423 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.290423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106103Jy sigma=1.203174 ! Fit after self-cal, rms=0.106109Jy sigma=1.202510 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106109Jy sigma=1.202510 ! Fit after self-cal, rms=0.101919Jy sigma=1.155003 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134515 Jy ! Component: 100 - total flux cleaned = 0.00183018 Jy ! Component: 150 - total flux cleaned = 0.00228489 Jy ! Component: 200 - total flux cleaned = 0.00270954 Jy ! Total flux subtracted in 200 components = 0.00270954 Jy ! Clean residual min=-0.015363 max=0.020685 Jy/beam ! Clean residual mean=-0.000119 rms=0.005308 Jy/beam ! Combined flux in latest and established models = 0.293132 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 43 components and 0.293132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101430Jy sigma=1.149706 ! Fit after self-cal, rms=0.101169Jy sigma=1.146469 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.265 x 8.758 at -0.236 degrees (North through East) ! Clean map min=-0.014673 max=0.14914 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101169Jy sigma=1.146469 ! Fit after self-cal, rms=0.101169Jy sigma=1.146469 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101169Jy sigma=1.146469 ! Fit after self-cal, rms=0.101161Jy sigma=1.146284 ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=8.758 mas, bpa=-0.236 degrees ! Estimated noise=2.26861 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -4.16152e-05 Jy ! Component: 100 - total flux cleaned = 0.000245861 Jy ! Component: 150 - total flux cleaned = 0.000640705 Jy ! Component: 200 - total flux cleaned = 0.00100299 Jy ! Total flux subtracted in 200 components = 0.00100299 Jy ! Clean residual min=-0.015046 max=0.020138 Jy/beam ! Clean residual mean=-0.000119 rms=0.005241 Jy/beam ! Combined flux in latest and established models = 0.294135 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.294135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100756Jy sigma=1.142275 ! Fit after self-cal, rms=0.100710Jy sigma=1.141830 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100710Jy sigma=1.141830 ! Fit after self-cal, rms=0.100710Jy sigma=1.141830 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100710Jy sigma=1.141830 ! Fit after self-cal, rms=0.100701Jy sigma=1.141828 ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=8.758 mas, bpa=-0.236 degrees ! Estimated noise=2.26861 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00034642 Jy ! Component: 100 - total flux cleaned = 3.12317e-05 Jy ! Component: 150 - total flux cleaned = 0.00037325 Jy ! Component: 200 - total flux cleaned = 0.000486472 Jy ! Total flux subtracted in 200 components = 0.000486472 Jy ! Clean residual min=-0.015044 max=0.019729 Jy/beam ! Clean residual mean=-0.000120 rms=0.005201 Jy/beam ! Combined flux in latest and established models = 0.294622 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.294622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100390Jy sigma=1.138561 ! Fit after self-cal, rms=0.100344Jy sigma=1.138210 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.03 mas, bmaj=27.5 mas, bpa=5.496 degrees ! Estimated noise=2.8571 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00384505 Jy ! Component: 100 - total flux cleaned = 0.0039587 Jy ! Component: 150 - total flux cleaned = 0.00417259 Jy ! Component: 200 - total flux cleaned = 0.00437321 Jy ! Total flux subtracted in 200 components = 0.00437321 Jy ! Clean residual min=-0.018597 max=0.017821 Jy/beam ! Clean residual mean=-0.000176 rms=0.007567 Jy/beam ! Combined flux in latest and established models = 0.298995 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 47 components and 0.298995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100340Jy sigma=1.138307 ! Fit after self-cal, rms=0.100313Jy sigma=1.137939 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.473 mas, bmaj=7.297 mas, bpa=-4.182 degrees ! Estimated noise=3.00782 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.161907 Jy ! Component: 100 - total flux cleaned = 0.22088 Jy ! Component: 150 - total flux cleaned = 0.250288 Jy ! Component: 200 - total flux cleaned = 0.265214 Jy ! Total flux subtracted in 200 components = 0.265214 Jy ! Clean residual min=-0.015543 max=0.020533 Jy/beam ! Clean residual mean=-0.000040 rms=0.004502 Jy/beam ! Combined flux in latest and established models = 0.265214 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.265214 Jy ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=8.758 mas, bpa=-0.236 degrees ! Estimated noise=2.26861 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0191914 Jy ! Component: 100 - total flux cleaned = 0.0240392 Jy ! Component: 150 - total flux cleaned = 0.0246526 Jy ! Component: 200 - total flux cleaned = 0.0252075 Jy ! Total flux subtracted in 200 components = 0.0252075 Jy ! Clean residual min=-0.015279 max=0.020223 Jy/beam ! Clean residual mean=-0.000129 rms=0.005361 Jy/beam ! Combined flux in latest and established models = 0.290422 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 46 components and 0.290421 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.03 mas, bmaj=27.5 mas, bpa=5.496 degrees ! Estimated noise=2.8571 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00629494 Jy ! Component: 100 - total flux cleaned = 0.00656428 Jy ! Component: 150 - total flux cleaned = 0.00682387 Jy ! Component: 200 - total flux cleaned = 0.00706987 Jy ! Total flux subtracted in 200 components = 0.00706987 Jy ! Clean residual min=-0.018738 max=0.018330 Jy/beam ! Clean residual mean=-0.000173 rms=0.007695 Jy/beam ! Combined flux in latest and established models = 0.297491 Jy ! Adding 4 model components to the UV plane model. ! The established model now contains 49 components and 0.297491 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=8.758 mas, bpa=-0.236 degrees ! Estimated noise=2.26861 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00335527 Jy ! Component: 100 - total flux cleaned = -0.00338212 Jy ! Component: 150 - total flux cleaned = -0.00324453 Jy ! Component: 200 - total flux cleaned = -0.00311529 Jy ! Total flux subtracted in 200 components = -0.00311529 Jy ! Clean residual min=-0.015018 max=0.019973 Jy/beam ! Clean residual mean=-0.000119 rms=0.005224 Jy/beam ! Combined flux in latest and established models = 0.294376 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 53 components and 0.294376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100951Jy sigma=1.142864 ! Fit after self-cal, rms=0.100963Jy sigma=1.142330 wmodel J1024-3234_S_2004_05_08_yyk\_map.mod ! Writing 53 model components to file: J1024-3234_S_2004_05_08_yyk_map.mod wobs J1024-3234_S_2004_05_08_yyk\_uvs.fits ! Writing UV FITS file: J1024-3234_S_2004_05_08_yyk_uvs.fits wwins J1024-3234_S_2004_05_08_yyk\_map.win ! wwins: Wrote 1 windows to J1024-3234_S_2004_05_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00781114 Jy ! Component: 100 - total flux cleaned = 0.0128324 Jy ! Component: 150 - total flux cleaned = 0.0169306 Jy ! Component: 200 - total flux cleaned = 0.0195948 Jy ! Component: 250 - total flux cleaned = 0.0210357 Jy ! Component: 300 - total flux cleaned = 0.0221838 Jy ! Component: 350 - total flux cleaned = 0.0232601 Jy ! Component: 400 - total flux cleaned = 0.0244548 Jy ! Component: 450 - total flux cleaned = 0.0257373 Jy ! Component: 500 - total flux cleaned = 0.0263422 Jy ! Component: 550 - total flux cleaned = 0.0263404 Jy ! Component: 600 - total flux cleaned = 0.026339 Jy ! Component: 650 - total flux cleaned = 0.0264682 Jy ! Component: 700 - total flux cleaned = 0.0264667 Jy ! Component: 750 - total flux cleaned = 0.0264672 Jy ! Component: 800 - total flux cleaned = 0.0270367 Jy ! Component: 850 - total flux cleaned = 0.0278015 Jy ! Component: 900 - total flux cleaned = 0.0283253 Jy ! Component: 950 - total flux cleaned = 0.0284267 Jy ! Component: 1000 - total flux cleaned = 0.0288203 Jy ! Component: 1050 - total flux cleaned = 0.0288201 Jy ! Component: 1100 - total flux cleaned = 0.0284498 Jy ! Component: 1150 - total flux cleaned = 0.0283597 Jy ! Component: 1200 - total flux cleaned = 0.0281819 Jy ! Component: 1250 - total flux cleaned = 0.0278361 Jy ! Component: 1300 - total flux cleaned = 0.0274997 Jy ! Component: 1350 - total flux cleaned = 0.0270893 Jy ! Component: 1400 - total flux cleaned = 0.0267704 Jy ! Component: 1450 - total flux cleaned = 0.0264575 Jy ! Component: 1500 - total flux cleaned = 0.026228 Jy ! Component: 1550 - total flux cleaned = 0.0258529 Jy ! Component: 1600 - total flux cleaned = 0.02556 Jy ! Component: 1650 - total flux cleaned = 0.0252733 Jy ! Component: 1700 - total flux cleaned = 0.0249929 Jy ! Component: 1750 - total flux cleaned = 0.0245082 Jy ! Component: 1800 - total flux cleaned = 0.0238327 Jy ! Component: 1850 - total flux cleaned = 0.0233682 Jy ! Component: 1900 - total flux cleaned = 0.0229137 Jy ! Component: 1950 - total flux cleaned = 0.0224663 Jy ! Component: 2000 - total flux cleaned = 0.021965 Jy ! Total flux subtracted in 2048 components = 0.021473 Jy ! Clean residual min=-0.003336 max=0.003956 Jy/beam ! Clean residual mean=-0.000124 rms=0.001247 Jy/beam ! Combined flux in latest and established models = 0.315849 Jy keep ! Adding 136 model components to the UV plane model. ! The established model now contains 189 components and 0.315849 Jy ![Exited script file: muppet] wmap "J1024-3234_S_2004_05_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.265 x 8.758 at -0.236 degrees (North through East) ! Clean map min=-0.0090993 max=0.14466 Jy/beam ! Writing clean map to FITS file: J1024-3234_S_2004_05_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.144656 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00124517 device "J1024-3234_S_2004_05_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J1024-3234_S_2004_05_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.58234 2.58234 5.16468 10.3294 20.6587 41.3175 82.6349 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0037 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.144 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.265 x 8.758 at -0.236 degrees (North through East) ! Clean map min=-0.0090993 max=0.14466 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1024-3234_S_2004_05_08_yyk\_map.gif/gif" ! Attempting to open device: 'J1024-3234_S_2004_05_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1024-3234_S_2004_05_08_yyk_uvs.log closed on Wed Dec 7 00:16:49 2005