! Started logfile: J1019-2708_S_2004_05_08_yyk_uvs.log on Wed Dec  7 01:03:52 2005
obs J1019-2708_S_2004_05_08_yyk_uve.fits
! Reading UV FITS file: J1019-2708_S_2004_05_08_yyk_uve.fits
! AN table 1: 8 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.3 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1019-2708
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1437 lines of history.
! 
! Reading 432 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1019-2708_S_2004_05_08_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 256x256 pixels with 1.00x1.00 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.114979 Jy 
startmod ,phase_soltime
! Applying default point source starting model.
! Performing phase self-cal over 10 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 80 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.932989Jy  sigma=15.295069
! Fit after  self-cal, rms=0.924244Jy  sigma=15.230649
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.023 mas, bmaj=22.67 mas, bpa=4.134 degrees
! Estimated noise=3.56931 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0631097 Jy
! Component: 100  -  total flux cleaned = 0.0746623 Jy
! Total flux subtracted in 100 components = 0.0746623 Jy
! Clean residual min=-0.011580 max=0.009296 Jy/beam
! Clean residual mean=0.000130 rms=0.003366 Jy/beam
! Combined flux in latest and established models = 0.0746623 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0746623 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082552Jy  sigma=1.158770
! Fit after  self-cal, rms=0.082733Jy  sigma=1.159518
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.461 mas, bmaj=25.13 mas, bpa=7.923 degrees
! Estimated noise=2.81563 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00976744 Jy
! Component: 100  -  total flux cleaned = 0.014482 Jy
! Component: 150  -  total flux cleaned = 0.0173087 Jy
! Component: 200  -  total flux cleaned = 0.0184572 Jy
! Total flux subtracted in 200 components = 0.0184572 Jy
! Clean residual min=-0.008244 max=0.008514 Jy/beam
! Clean residual mean=0.000080 rms=0.002892 Jy/beam
! Combined flux in latest and established models = 0.0931195 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 30 components and 0.0931195 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081751Jy  sigma=1.143225
! Fit after  self-cal, rms=0.081717Jy  sigma=1.142944
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
selflims ampcor_selflim
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    FD        0.00*    HN        0.00*    KP        0.00*    
!   LA        0.00*    MK        0.00*    NL        0.00*    OV        0.00*    
!   PT        0.00*    SC        0.00*    
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.081717Jy  sigma=1.142944
! Fit after  self-cal, rms=0.082079Jy  sigma=1.149088
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082079Jy  sigma=1.149088
! Fit after  self-cal, rms=0.082080Jy  sigma=1.148847
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.449 mas, bmaj=25.15 mas, bpa=7.843 degrees
! Estimated noise=2.82242 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000844598 Jy
! Component: 100  -  total flux cleaned = 0.0011945 Jy
! Component: 150  -  total flux cleaned = 0.00135617 Jy
! Component: 200  -  total flux cleaned = 0.00150831 Jy
! Total flux subtracted in 200 components = 0.00150831 Jy
! Clean residual min=-0.008031 max=0.008494 Jy/beam
! Clean residual mean=0.000078 rms=0.002837 Jy/beam
! Combined flux in latest and established models = 0.0946278 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 40 components and 0.0946278 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082000Jy  sigma=1.147953
! Fit after  self-cal, rms=0.082023Jy  sigma=1.147942
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082023Jy  sigma=1.147942
! Fit after  self-cal, rms=0.075123Jy  sigma=1.057488
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0034975 Jy
! Component: 100  -  total flux cleaned = 0.00411705 Jy
! Component: 150  -  total flux cleaned = 0.0042496 Jy
! Component: 200  -  total flux cleaned = 0.00425282 Jy
! Total flux subtracted in 200 components = 0.00425282 Jy
! Clean residual min=-0.006976 max=0.008357 Jy/beam
! Clean residual mean=0.000040 rms=0.002686 Jy/beam
! Combined flux in latest and established models = 0.0988807 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 32 model components to the UV plane model.
! The established model now contains 69 components and 0.0988807 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074633Jy  sigma=1.052525
! Fit after  self-cal, rms=0.074207Jy  sigma=1.044443
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.449 x 25.15 at 7.843 degrees (North through East)
! Clean map  min=-0.0066914  max=0.082231 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.64 mas, bmaj=26.1 mas, bpa=9.925 degrees
! Estimated noise=2.86793 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000545308 Jy
! Component: 100  -  total flux cleaned = -0.000493877 Jy
! Component: 150  -  total flux cleaned = -0.000590637 Jy
! Component: 200  -  total flux cleaned = -0.000589529 Jy
! Total flux subtracted in 200 components = -0.000589529 Jy
! Clean residual min=-0.006883 max=0.008107 Jy/beam
! Clean residual mean=0.000061 rms=0.002798 Jy/beam
! Combined flux in latest and established models = 0.0982911 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 88 components and 0.0982911 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074137Jy  sigma=1.043358
! Fit after  self-cal, rms=0.074164Jy  sigma=1.042405
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.04 mas, bmaj=22.62 mas, bpa=4.246 degrees
! Estimated noise=3.55899 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0694866 Jy
! Component: 100  -  total flux cleaned = 0.0829247 Jy
! Component: 150  -  total flux cleaned = 0.0870843 Jy
! Component: 200  -  total flux cleaned = 0.0898232 Jy
! Total flux subtracted in 200 components = 0.0898232 Jy
! Clean residual min=-0.011384 max=0.012279 Jy/beam
! Clean residual mean=0.000060 rms=0.003403 Jy/beam
! Combined flux in latest and established models = 0.0898232 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 41 model components to the UV plane model.
! The established model now contains 41 components and 0.0898232 Jy
! Inverting map and beam 
! Estimated beam: bmin=9.449 mas, bmaj=25.15 mas, bpa=7.843 degrees
! Estimated noise=2.82242 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00410321 Jy
! Component: 100  -  total flux cleaned = 0.00503309 Jy
! Component: 150  -  total flux cleaned = 0.00553668 Jy
! Component: 200  -  total flux cleaned = 0.00576792 Jy
! Total flux subtracted in 200 components = 0.00576792 Jy
! Clean residual min=-0.007334 max=0.008802 Jy/beam
! Clean residual mean=0.000048 rms=0.002853 Jy/beam
! Combined flux in latest and established models = 0.0955911 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 64 components and 0.0955911 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.64 mas, bmaj=26.1 mas, bpa=9.925 degrees
! Estimated noise=2.86793 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 5.79117e-05 Jy
! Component: 100  -  total flux cleaned = 6.2507e-05 Jy
! Component: 150  -  total flux cleaned = 0.00016421 Jy
! Component: 200  -  total flux cleaned = 0.000257484 Jy
! Total flux subtracted in 200 components = 0.000257484 Jy
! Clean residual min=-0.007124 max=0.008648 Jy/beam
! Clean residual mean=0.000072 rms=0.002934 Jy/beam
! Combined flux in latest and established models = 0.0958486 Jy
! Adding 15 model components to the UV plane model.
! The established model now contains 70 components and 0.0958486 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=9.449 mas, bmaj=25.15 mas, bpa=7.843 degrees
! Estimated noise=2.82242 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0004549 Jy
! Component: 100  -  total flux cleaned = 0.000493468 Jy
! Component: 150  -  total flux cleaned = 0.000565822 Jy
! Component: 200  -  total flux cleaned = 0.000600925 Jy
! Total flux subtracted in 200 components = 0.000600925 Jy
! Clean residual min=-0.007120 max=0.008583 Jy/beam
! Clean residual mean=0.000051 rms=0.002770 Jy/beam
! Combined flux in latest and established models = 0.0964495 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 82 components and 0.0964495 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074109Jy  sigma=1.041545
! Fit after  self-cal, rms=0.074131Jy  sigma=1.041098
wmodel J1019-2708_S_2004_05_08_yyk\_map.mod
! Writing 82 model components to file: J1019-2708_S_2004_05_08_yyk_map.mod
wobs J1019-2708_S_2004_05_08_yyk\_uvs.fits
! Writing UV FITS file: J1019-2708_S_2004_05_08_yyk_uvs.fits
wwins J1019-2708_S_2004_05_08_yyk\_map.win
! wwins: Wrote 1 windows to J1019-2708_S_2004_05_08_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=1024  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00269546 Jy
! Component: 100  -  total flux cleaned = 0.00208795 Jy
! Component: 150  -  total flux cleaned = 0.00142993 Jy
! Component: 200  -  total flux cleaned = 0.000298412 Jy
! Component: 250  -  total flux cleaned = -0.000949772 Jy
! Component: 300  -  total flux cleaned = -0.00185107 Jy
! Component: 350  -  total flux cleaned = -0.00270422 Jy
! Component: 400  -  total flux cleaned = -0.00351438 Jy
! Component: 450  -  total flux cleaned = -0.00428275 Jy
! Component: 500  -  total flux cleaned = -0.00465069 Jy
! Component: 550  -  total flux cleaned = -0.00507385 Jy
! Component: 600  -  total flux cleaned = -0.00534478 Jy
! Component: 650  -  total flux cleaned = -0.0054764 Jy
! Component: 700  -  total flux cleaned = -0.00566864 Jy
! Component: 750  -  total flux cleaned = -0.00579212 Jy
! Component: 800  -  total flux cleaned = -0.00597411 Jy
! Component: 850  -  total flux cleaned = -0.00615003 Jy
! Component: 900  -  total flux cleaned = -0.00632158 Jy
! Component: 950  -  total flux cleaned = -0.00654379 Jy
! Component: 1000  -  total flux cleaned = -0.00665221 Jy
! Total flux subtracted in 1024 components = -0.00670538 Jy
! Clean residual min=-0.003358 max=0.003057 Jy/beam
! Clean residual mean=0.000072 rms=0.001223 Jy/beam
! Combined flux in latest and established models = 0.0897441 Jy
keep
! Adding 74 model components to the UV plane model.
! The established model now contains 156 components and 0.0897441 Jy
![Exited script file: muppet]
wmap "J1019-2708_S_2004_05_08_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.449 x 25.15 at 7.843 degrees (North through East)
! Clean map  min=-0.0071504  max=0.082043 Jy/beam
! Writing clean map to FITS file: J1019-2708_S_2004_05_08_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0820425 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00119423 
device "J1019-2708_S_2004_05_08_yyk\_map.eps/VPS"
! Attempting to open device: 'J1019-2708_S_2004_05_08_yyk_map.eps/VPS'
loglevs 1*100*3*image_rms/peak_flux
! The new contour levels are:
!  -4.36686 4.36686 8.73373 17.4675 34.9349 69.8698
print "clev=",int(1*3*image_rms*10000)/10000
! clev= 0.0035 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.082 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.449 x 25.15 at 7.843 degrees (North through East)
! Clean map  min=-0.0071504  max=0.082043 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1019-2708_S_2004_05_08_yyk\_map.gif/gif"
! Attempting to open device: 'J1019-2708_S_2004_05_08_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1019-2708_S_2004_05_08_yyk_uvs.log closed on Wed Dec  7 01:03:53 2005