! Started logfile: J1008-1629_S_2004_05_27_yyk_uvs.log on Wed Dec  7 00:15:59 2005
obs J1008-1629_S_2004_05_27_yyk_uve.fits
! Reading UV FITS file: J1008-1629_S_2004_05_27_yyk_uve.fits
! AN table 1: 16 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.365278 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1008-1629
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1388 lines of history.
! 
! Reading 1052 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1008-1629_S_2004_05_27_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.0954955 Jy 
startmod ,phase_soltime
! Applying default point source starting model.
! Performing phase self-cal over 10 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 79 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 102 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 85 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 142 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.945569Jy  sigma=15.535514
! Fit after  self-cal, rms=0.940359Jy  sigma=15.577750
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.048 mas, bmaj=8.469 mas, bpa=-8.929 degrees
! Estimated noise=4.06126 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0532627 Jy
! Component: 100  -  total flux cleaned = 0.0590729 Jy
! Total flux subtracted in 100 components = 0.0590729 Jy
! Clean residual min=-0.012165 max=0.011333 Jy/beam
! Clean residual mean=0.000265 rms=0.003219 Jy/beam
! Combined flux in latest and established models = 0.0590729 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0590729 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071555Jy  sigma=1.043283
! Fit after  self-cal, rms=0.071641Jy  sigma=1.041292
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.705 mas, bmaj=14.06 mas, bpa=-8.074 degrees
! Estimated noise=1.88339 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00760101 Jy
! Component: 100  -  total flux cleaned = 0.00934868 Jy
! Component: 150  -  total flux cleaned = 0.00957797 Jy
! Component: 200  -  total flux cleaned = 0.00964796 Jy
! Total flux subtracted in 200 components = 0.00964796 Jy
! Clean residual min=-0.009745 max=0.010782 Jy/beam
! Clean residual mean=0.000708 rms=0.003560 Jy/beam
! Combined flux in latest and established models = 0.0687209 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 21 components and 0.0687209 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071354Jy  sigma=1.030989
! Fit after  self-cal, rms=0.071348Jy  sigma=1.030741
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
selflims ampcor_selflim
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.071348Jy  sigma=1.030741
! Fit after  self-cal, rms=0.070115Jy  sigma=1.030439
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070115Jy  sigma=1.030439
! Fit after  self-cal, rms=0.069864Jy  sigma=1.027175
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.721 mas, bmaj=14.06 mas, bpa=-7.753 degrees
! Estimated noise=1.91955 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -4.0652e-05 Jy
! Component: 100  -  total flux cleaned = 1.92627e-05 Jy
! Component: 150  -  total flux cleaned = 7.81218e-05 Jy
! Component: 200  -  total flux cleaned = 0.000194681 Jy
! Total flux subtracted in 200 components = 0.000194681 Jy
! Clean residual min=-0.010508 max=0.010806 Jy/beam
! Clean residual mean=0.000715 rms=0.003624 Jy/beam
! Combined flux in latest and established models = 0.0689156 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 29 components and 0.0689156 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069777Jy  sigma=1.025887
! Fit after  self-cal, rms=0.069775Jy  sigma=1.025794
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069775Jy  sigma=1.025794
! Fit after  self-cal, rms=0.063179Jy  sigma=0.919212
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00569605 Jy
! Component: 100  -  total flux cleaned = 0.00692654 Jy
! Component: 150  -  total flux cleaned = 0.00708127 Jy
! Component: 200  -  total flux cleaned = 0.00717305 Jy
! Total flux subtracted in 200 components = 0.00717305 Jy
! Clean residual min=-0.009638 max=0.011290 Jy/beam
! Clean residual mean=0.000667 rms=0.003406 Jy/beam
! Combined flux in latest and established models = 0.0760886 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 35 components and 0.0760886 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062859Jy  sigma=0.912759
! Fit after  self-cal, rms=0.061943Jy  sigma=0.903832
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.721 x 14.06 at -7.753 degrees (North through East)
! Clean map  min=-0.0095473  max=0.062707 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.98 mas, bmaj=28.12 mas, bpa=2.353 degrees
! Estimated noise=2.11071 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00176822 Jy
! Component: 100  -  total flux cleaned = 0.00186779 Jy
! Component: 150  -  total flux cleaned = 0.00196355 Jy
! Component: 200  -  total flux cleaned = 0.0020545 Jy
! Total flux subtracted in 200 components = 0.0020545 Jy
! Clean residual min=-0.010451 max=0.013286 Jy/beam
! Clean residual mean=0.000860 rms=0.004138 Jy/beam
! Combined flux in latest and established models = 0.0781431 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 44 components and 0.0781431 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061944Jy  sigma=0.903471
! Fit after  self-cal, rms=0.061760Jy  sigma=0.901882
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.113 mas, bmaj=8.615 mas, bpa=-8.99 degrees
! Estimated noise=4.12724 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0602825 Jy
! Component: 100  -  total flux cleaned = 0.0692396 Jy
! Component: 150  -  total flux cleaned = 0.0703581 Jy
! Component: 200  -  total flux cleaned = 0.0703445 Jy
! Total flux subtracted in 200 components = 0.0703445 Jy
! Clean residual min=-0.008899 max=0.014868 Jy/beam
! Clean residual mean=0.000223 rms=0.003072 Jy/beam
! Combined flux in latest and established models = 0.0703444 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0703444 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.721 mas, bmaj=14.06 mas, bpa=-7.753 degrees
! Estimated noise=1.91955 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00436063 Jy
! Component: 100  -  total flux cleaned = 0.00443675 Jy
! Component: 150  -  total flux cleaned = 0.00444159 Jy
! Component: 200  -  total flux cleaned = 0.0045057 Jy
! Total flux subtracted in 200 components = 0.0045057 Jy
! Clean residual min=-0.009917 max=0.010824 Jy/beam
! Clean residual mean=0.000692 rms=0.003449 Jy/beam
! Combined flux in latest and established models = 0.0748501 Jy
! Adding 12 model components to the UV plane model.
! The established model now contains 27 components and 0.0748501 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.98 mas, bmaj=28.12 mas, bpa=2.353 degrees
! Estimated noise=2.11071 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.001429 Jy
! Component: 100  -  total flux cleaned = 0.00155439 Jy
! Component: 150  -  total flux cleaned = 0.00167231 Jy
! Component: 200  -  total flux cleaned = 0.00178356 Jy
! Total flux subtracted in 200 components = 0.00178356 Jy
! Clean residual min=-0.010784 max=0.012915 Jy/beam
! Clean residual mean=0.000900 rms=0.004192 Jy/beam
! Combined flux in latest and established models = 0.0766337 Jy
! Adding 11 model components to the UV plane model.
! The established model now contains 35 components and 0.0766337 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.721 mas, bmaj=14.06 mas, bpa=-7.753 degrees
! Estimated noise=1.91955 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000731719 Jy
! Component: 100  -  total flux cleaned = -0.000735506 Jy
! Component: 150  -  total flux cleaned = -0.000685739 Jy
! Component: 200  -  total flux cleaned = -0.000589455 Jy
! Total flux subtracted in 200 components = -0.000589455 Jy
! Clean residual min=-0.009694 max=0.011026 Jy/beam
! Clean residual mean=0.000669 rms=0.003394 Jy/beam
! Combined flux in latest and established models = 0.0760442 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 40 components and 0.0760442 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061848Jy  sigma=0.903251
! Fit after  self-cal, rms=0.061804Jy  sigma=0.902840
wmodel J1008-1629_S_2004_05_27_yyk\_map.mod
! Writing 40 model components to file: J1008-1629_S_2004_05_27_yyk_map.mod
wobs J1008-1629_S_2004_05_27_yyk\_uvs.fits
! Writing UV FITS file: J1008-1629_S_2004_05_27_yyk_uvs.fits
wwins J1008-1629_S_2004_05_27_yyk\_map.win
! wwins: Wrote 1 windows to J1008-1629_S_2004_05_27_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00270659 Jy
! Component: 100  -  total flux cleaned = 0.00449369 Jy
! Component: 150  -  total flux cleaned = 0.00653296 Jy
! Component: 200  -  total flux cleaned = 0.00846225 Jy
! Component: 250  -  total flux cleaned = 0.0105156 Jy
! Component: 300  -  total flux cleaned = 0.0120196 Jy
! Component: 350  -  total flux cleaned = 0.012709 Jy
! Component: 400  -  total flux cleaned = 0.0133626 Jy
! Component: 450  -  total flux cleaned = 0.013595 Jy
! Component: 500  -  total flux cleaned = 0.0138177 Jy
! Component: 550  -  total flux cleaned = 0.0138887 Jy
! Component: 600  -  total flux cleaned = 0.0143017 Jy
! Component: 650  -  total flux cleaned = 0.0146981 Jy
! Component: 700  -  total flux cleaned = 0.0150177 Jy
! Component: 750  -  total flux cleaned = 0.0153892 Jy
! Component: 800  -  total flux cleaned = 0.015745 Jy
! Component: 850  -  total flux cleaned = 0.0160301 Jy
! Component: 900  -  total flux cleaned = 0.0163603 Jy
! Component: 950  -  total flux cleaned = 0.016626 Jy
! Component: 1000  -  total flux cleaned = 0.0168849 Jy
! Component: 1050  -  total flux cleaned = 0.017234 Jy
! Component: 1100  -  total flux cleaned = 0.0171369 Jy
! Component: 1150  -  total flux cleaned = 0.0171372 Jy
! Component: 1200  -  total flux cleaned = 0.0170907 Jy
! Component: 1250  -  total flux cleaned = 0.0170459 Jy
! Component: 1300  -  total flux cleaned = 0.0171772 Jy
! Component: 1350  -  total flux cleaned = 0.0172627 Jy
! Component: 1400  -  total flux cleaned = 0.0173885 Jy
! Component: 1450  -  total flux cleaned = 0.0175534 Jy
! Component: 1500  -  total flux cleaned = 0.0177161 Jy
! Component: 1550  -  total flux cleaned = 0.0177156 Jy
! Component: 1600  -  total flux cleaned = 0.0177152 Jy
! Component: 1650  -  total flux cleaned = 0.0177545 Jy
! Component: 1700  -  total flux cleaned = 0.017793 Jy
! Component: 1750  -  total flux cleaned = 0.0178309 Jy
! Component: 1800  -  total flux cleaned = 0.0177548 Jy
! Component: 1850  -  total flux cleaned = 0.0177173 Jy
! Component: 1900  -  total flux cleaned = 0.0177547 Jy
! Component: 1950  -  total flux cleaned = 0.0176802 Jy
! Component: 2000  -  total flux cleaned = 0.0176433 Jy
! Total flux subtracted in 2048 components = 0.0176066 Jy
! Clean residual min=-0.002545 max=0.002108 Jy/beam
! Clean residual mean=0.000090 rms=0.000768 Jy/beam
! Combined flux in latest and established models = 0.0936509 Jy
keep
! Adding 129 model components to the UV plane model.
! The established model now contains 169 components and 0.0936509 Jy
![Exited script file: muppet]
wmap "J1008-1629_S_2004_05_27_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.721 x 14.06 at -7.753 degrees (North through East)
! Clean map  min=-0.0049025  max=0.063613 Jy/beam
! Writing clean map to FITS file: J1008-1629_S_2004_05_27_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0636132 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000752189 
device "J1008-1629_S_2004_05_27_yyk\_map.eps/VPS"
! Attempting to open device: 'J1008-1629_S_2004_05_27_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -3.54732 3.54732 7.09464 14.1893 28.3786 56.7572
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0022 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.063 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.721 x 14.06 at -7.753 degrees (North through East)
! Clean map  min=-0.0049025  max=0.063613 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1008-1629_S_2004_05_27_yyk\_map.gif/gif"
! Attempting to open device: 'J1008-1629_S_2004_05_27_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1008-1629_S_2004_05_27_yyk_uvs.log closed on Wed Dec  7 00:16:02 2005