! Started logfile: J1007-3333_X_2004_04_30_yyk_uvs.log on Wed Dec 7 01:08:53 2005 obs J1007-3333_X_2004_04_30_yyk_uve.fits ! Reading UV FITS file: J1007-3333_X_2004_04_30_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.783333 visibilities/baseline/integration-bin. ! Found source: J1007-3333 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1544 lines of history. ! ! Reading 564 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1007-3333_X_2004_04_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.327366 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.692181Jy sigma=11.145222 ! Fit after self-cal, rms=0.692135Jy sigma=11.142714 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6476 mas, bmaj=1.881 mas, bpa=-2.47 degrees ! Estimated noise=2.31304 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.26597 Jy ! Component: 100 - total flux cleaned = 0.314578 Jy ! Total flux subtracted in 100 components = 0.314578 Jy ! Clean residual min=-0.014027 max=0.024757 Jy/beam ! Clean residual mean=-0.000179 rms=0.004241 Jy/beam ! Combined flux in latest and established models = 0.314578 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.314578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087629Jy sigma=1.301799 ! Fit after self-cal, rms=0.087552Jy sigma=1.301028 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8062 mas, bmaj=2.187 mas, bpa=-2.337 degrees ! Estimated noise=1.8511 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0333237 Jy ! Component: 100 - total flux cleaned = 0.0443527 Jy ! Component: 150 - total flux cleaned = 0.0482415 Jy ! Component: 200 - total flux cleaned = 0.0485003 Jy ! Total flux subtracted in 200 components = 0.0485003 Jy ! Clean residual min=-0.010763 max=0.015036 Jy/beam ! Clean residual mean=-0.000006 rms=0.003259 Jy/beam ! Combined flux in latest and established models = 0.363078 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 22 components and 0.363078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084413Jy sigma=1.150098 ! Fit after self-cal, rms=0.084351Jy sigma=1.149822 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.084351Jy sigma=1.149822 ! Fit after self-cal, rms=0.084351Jy sigma=1.149822 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084351Jy sigma=1.149822 ! Fit after self-cal, rms=0.084351Jy sigma=1.149822 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8062 mas, bmaj=2.187 mas, bpa=-2.337 degrees ! Estimated noise=1.8511 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000306364 Jy ! Component: 100 - total flux cleaned = 0.000315324 Jy ! Component: 150 - total flux cleaned = 0.000391989 Jy ! Component: 200 - total flux cleaned = 0.000395731 Jy ! Total flux subtracted in 200 components = 0.000395731 Jy ! Clean residual min=-0.010707 max=0.014868 Jy/beam ! Clean residual mean=-0.000005 rms=0.003240 Jy/beam ! Combined flux in latest and established models = 0.363474 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 24 components and 0.363474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084231Jy sigma=1.147936 ! Fit after self-cal, rms=0.084212Jy sigma=1.147821 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084212Jy sigma=1.147821 ! Fit after self-cal, rms=0.083199Jy sigma=1.132541 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11.2, -24.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.016859 Jy ! Component: 100 - total flux cleaned = 0.0199147 Jy ! Component: 150 - total flux cleaned = 0.0196449 Jy ! Component: 200 - total flux cleaned = 0.0195193 Jy ! Total flux subtracted in 200 components = 0.0195193 Jy ! Clean residual min=-0.008862 max=0.011845 Jy/beam ! Clean residual mean=0.000077 rms=0.002684 Jy/beam ! Combined flux in latest and established models = 0.382993 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 46 components and 0.382993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081085Jy sigma=1.088515 ! Fit after self-cal, rms=0.080709Jy sigma=1.082252 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8062 x 2.187 at -2.337 degrees (North through East) ! Clean map min=-0.0083891 max=0.31851 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080709Jy sigma=1.082252 ! Fit after self-cal, rms=0.080709Jy sigma=1.082252 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080709Jy sigma=1.082252 ! Fit after self-cal, rms=0.080697Jy sigma=1.082185 ! Inverting map and beam ! Estimated beam: bmin=0.8062 mas, bmaj=2.187 mas, bpa=-2.337 degrees ! Estimated noise=1.8511 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00305109 Jy ! Component: 100 - total flux cleaned = 0.00297584 Jy ! Component: 150 - total flux cleaned = 0.00296954 Jy ! Component: 200 - total flux cleaned = 0.00291116 Jy ! Total flux subtracted in 200 components = 0.00291116 Jy ! Clean residual min=-0.008685 max=0.009450 Jy/beam ! Clean residual mean=0.000082 rms=0.002586 Jy/beam ! Combined flux in latest and established models = 0.385904 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 57 components and 0.385904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080542Jy sigma=1.079077 ! Fit after self-cal, rms=0.080525Jy sigma=1.078706 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080525Jy sigma=1.078706 ! Fit after self-cal, rms=0.080327Jy sigma=1.080071 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080327Jy sigma=1.080071 ! Fit after self-cal, rms=0.080324Jy sigma=1.080061 ! Inverting map and beam ! Estimated beam: bmin=0.797 mas, bmaj=2.162 mas, bpa=-2.746 degrees ! Estimated noise=1.83547 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000279858 Jy ! Component: 100 - total flux cleaned = 0.000173424 Jy ! Component: 150 - total flux cleaned = 0.000168578 Jy ! Component: 200 - total flux cleaned = 0.00039816 Jy ! Total flux subtracted in 200 components = 0.00039816 Jy ! Clean residual min=-0.008436 max=0.009466 Jy/beam ! Clean residual mean=0.000061 rms=0.002424 Jy/beam ! Combined flux in latest and established models = 0.386302 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 67 components and 0.386302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080068Jy sigma=1.076528 ! Fit after self-cal, rms=0.080074Jy sigma=1.076462 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.453 mas, bmaj=7.547 mas, bpa=0.8255 degrees ! Estimated noise=2.44345 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00407695 Jy ! Component: 100 - total flux cleaned = 0.00408382 Jy ! Component: 150 - total flux cleaned = 0.00414862 Jy ! Component: 200 - total flux cleaned = 0.00421369 Jy ! Total flux subtracted in 200 components = 0.00421369 Jy ! Clean residual min=-0.009470 max=0.009352 Jy/beam ! Clean residual mean=0.000160 rms=0.003516 Jy/beam ! Combined flux in latest and established models = 0.390516 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 72 components and 0.390516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080325Jy sigma=1.079054 ! Fit after self-cal, rms=0.080327Jy sigma=1.078971 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6446 mas, bmaj=1.872 mas, bpa=-2.646 degrees ! Estimated noise=2.29677 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.264516 Jy ! Component: 100 - total flux cleaned = 0.315395 Jy ! Component: 150 - total flux cleaned = 0.338643 Jy ! Component: 200 - total flux cleaned = 0.352595 Jy ! Total flux subtracted in 200 components = 0.352595 Jy ! Clean residual min=-0.012675 max=0.016317 Jy/beam ! Clean residual mean=-0.000060 rms=0.003076 Jy/beam ! Combined flux in latest and established models = 0.352595 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.352595 Jy ! Inverting map and beam ! Estimated beam: bmin=0.797 mas, bmaj=2.162 mas, bpa=-2.746 degrees ! Estimated noise=1.83547 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.4, 22.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0215981 Jy ! Component: 100 - total flux cleaned = 0.0301101 Jy ! Component: 150 - total flux cleaned = 0.0331555 Jy ! Component: 200 - total flux cleaned = 0.0333059 Jy ! Total flux subtracted in 200 components = 0.0333059 Jy ! Clean residual min=-0.008589 max=0.009194 Jy/beam ! Clean residual mean=0.000050 rms=0.002324 Jy/beam ! Combined flux in latest and established models = 0.385901 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 69 components and 0.385901 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.453 mas, bmaj=7.547 mas, bpa=0.8255 degrees ! Estimated noise=2.44345 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00688228 Jy ! Component: 100 - total flux cleaned = 0.00734803 Jy ! Component: 150 - total flux cleaned = 0.00762868 Jy ! Component: 200 - total flux cleaned = 0.00802077 Jy ! Total flux subtracted in 200 components = 0.00802077 Jy ! Clean residual min=-0.009187 max=0.011391 Jy/beam ! Clean residual mean=0.000190 rms=0.003413 Jy/beam ! Combined flux in latest and established models = 0.393922 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 85 components and 0.393922 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.797 mas, bmaj=2.162 mas, bpa=-2.746 degrees ! Estimated noise=1.83547 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.001912 Jy ! Component: 100 - total flux cleaned = -0.00229553 Jy ! Component: 150 - total flux cleaned = -0.00229478 Jy ! Component: 200 - total flux cleaned = -0.00229259 Jy ! Total flux subtracted in 200 components = -0.00229259 Jy ! Clean residual min=-0.008174 max=0.008752 Jy/beam ! Clean residual mean=0.000080 rms=0.002248 Jy/beam ! Combined flux in latest and established models = 0.391629 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 97 components and 0.391629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076352Jy sigma=1.047471 ! Fit after self-cal, rms=0.076208Jy sigma=1.043078 wmodel J1007-3333_X_2004_04_30_yyk\_map.mod ! Writing 97 model components to file: J1007-3333_X_2004_04_30_yyk_map.mod wobs J1007-3333_X_2004_04_30_yyk\_uvs.fits ! Writing UV FITS file: J1007-3333_X_2004_04_30_yyk_uvs.fits wwins J1007-3333_X_2004_04_30_yyk\_map.win ! wwins: Wrote 3 windows to J1007-3333_X_2004_04_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000999191 Jy ! Component: 100 - total flux cleaned = -0.00113692 Jy ! Component: 150 - total flux cleaned = -0.00137203 Jy ! Component: 200 - total flux cleaned = -0.00159561 Jy ! Component: 250 - total flux cleaned = -0.00212587 Jy ! Component: 300 - total flux cleaned = -0.00253007 Jy ! Component: 350 - total flux cleaned = -0.00300829 Jy ! Component: 400 - total flux cleaned = -0.00319068 Jy ! Component: 450 - total flux cleaned = -0.00345208 Jy ! Component: 500 - total flux cleaned = -0.00345288 Jy ! Component: 550 - total flux cleaned = -0.00345241 Jy ! Component: 600 - total flux cleaned = -0.00337422 Jy ! Component: 650 - total flux cleaned = -0.00352597 Jy ! Component: 700 - total flux cleaned = -0.00389071 Jy ! Component: 750 - total flux cleaned = -0.00417701 Jy ! Component: 800 - total flux cleaned = -0.00459507 Jy ! Component: 850 - total flux cleaned = -0.00493459 Jy ! Component: 900 - total flux cleaned = -0.00552945 Jy ! Component: 950 - total flux cleaned = -0.00610852 Jy ! Component: 1000 - total flux cleaned = -0.00642201 Jy ! Component: 1050 - total flux cleaned = -0.00679182 Jy ! Component: 1100 - total flux cleaned = -0.00691273 Jy ! Component: 1150 - total flux cleaned = -0.00703159 Jy ! Component: 1200 - total flux cleaned = -0.00726347 Jy ! Component: 1250 - total flux cleaned = -0.00720571 Jy ! Component: 1300 - total flux cleaned = -0.0075419 Jy ! Component: 1350 - total flux cleaned = -0.0074861 Jy ! Component: 1400 - total flux cleaned = -0.00764934 Jy ! Component: 1450 - total flux cleaned = -0.00775639 Jy ! Component: 1500 - total flux cleaned = -0.00802031 Jy ! Component: 1550 - total flux cleaned = -0.00807191 Jy ! Component: 1600 - total flux cleaned = -0.00817454 Jy ! Component: 1650 - total flux cleaned = -0.0082756 Jy ! Component: 1700 - total flux cleaned = -0.00827545 Jy ! Component: 1750 - total flux cleaned = -0.00842374 Jy ! Component: 1800 - total flux cleaned = -0.00847309 Jy ! Component: 1850 - total flux cleaned = -0.00866576 Jy ! Component: 1900 - total flux cleaned = -0.00866596 Jy ! Component: 1950 - total flux cleaned = -0.00857252 Jy ! Component: 2000 - total flux cleaned = -0.0086192 Jy ! Total flux subtracted in 2048 components = -0.00861934 Jy ! Clean residual min=-0.002855 max=0.002360 Jy/beam ! Clean residual mean=0.000035 rms=0.000906 Jy/beam ! Combined flux in latest and established models = 0.38301 Jy keep ! Adding 125 model components to the UV plane model. ! The established model now contains 222 components and 0.38301 Jy ![Exited script file: muppet] wmap "J1007-3333_X_2004_04_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.797 x 2.162 at -2.746 degrees (North through East) ! Clean map min=-0.0055523 max=0.30465 Jy/beam ! Writing clean map to FITS file: J1007-3333_X_2004_04_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.304651 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00090108 device "J1007-3333_X_2004_04_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J1007-3333_X_2004_04_30_yyk_map.eps/VPS' loglevs 2*100*3*image_rms/peak_flux ! The new contour levels are: ! -1.77464 1.77464 3.54929 7.09858 14.1972 28.3943 56.7886 print "clev=",int(2*3*image_rms*10000)/10000 ! clev= 0.0054 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.304 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.797 x 2.162 at -2.746 degrees (North through East) ! Clean map min=-0.0055523 max=0.30465 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1007-3333_X_2004_04_30_yyk\_map.gif/gif" ! Attempting to open device: 'J1007-3333_X_2004_04_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1007-3333_X_2004_04_30_yyk_uvs.log closed on Wed Dec 7 01:08:56 2005