! Started logfile: J0939-1731_X_2004_05_27_yyk_uvs.log on Wed Dec 7 00:14:29 2005 obs J0939-1731_X_2004_05_27_yyk_uve.fits ! Reading UV FITS file: J0939-1731_X_2004_05_27_yyk_uve.fits ! AN table 1: 6 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.759259 visibilities/baseline/integration-bin. ! Found source: J0939-1731 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1383 lines of history. ! ! Reading 820 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0939-1731_X_2004_05_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.144908 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.891789Jy sigma=16.119454 ! Fit after self-cal, rms=0.883564Jy sigma=16.004474 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9443 mas, bmaj=2.96 mas, bpa=18.6 degrees ! Estimated noise=2.22914 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.102325 Jy ! Component: 100 - total flux cleaned = 0.130164 Jy ! Total flux subtracted in 100 components = 0.130164 Jy ! Clean residual min=-0.010427 max=0.009622 Jy/beam ! Clean residual mean=-0.000013 rms=0.002772 Jy/beam ! Combined flux in latest and established models = 0.130164 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.130164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074844Jy sigma=1.122341 ! Fit after self-cal, rms=0.074888Jy sigma=1.121929 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.253 mas, bmaj=3.534 mas, bpa=14.19 degrees ! Estimated noise=1.62991 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.017052 Jy ! Component: 100 - total flux cleaned = 0.023352 Jy ! Component: 150 - total flux cleaned = 0.0261062 Jy ! Component: 200 - total flux cleaned = 0.0264692 Jy ! Total flux subtracted in 200 components = 0.0264692 Jy ! Clean residual min=-0.007425 max=0.007374 Jy/beam ! Clean residual mean=0.000024 rms=0.001980 Jy/beam ! Combined flux in latest and established models = 0.156633 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 42 components and 0.156633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072747Jy sigma=1.064488 ! Fit after self-cal, rms=0.072740Jy sigma=1.064243 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02508 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.04 HN 0.97 KP 0.95 ! LA 1.05 MK 1.00* NL 1.05 OV 1.00* ! PT 0.88 SC 0.86 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01316 ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.02 HN 1.08 KP 0.93 ! LA 0.99 MK 1.00* NL 1.00 OV 0.96 ! PT 0.95 SC 1.06 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.072740Jy sigma=1.064243 ! Fit after self-cal, rms=0.072362Jy sigma=1.054299 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072362Jy sigma=1.054299 ! Fit after self-cal, rms=0.072371Jy sigma=1.054265 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.24 mas, bmaj=3.571 mas, bpa=14.68 degrees ! Estimated noise=1.61708 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00132667 Jy ! Component: 100 - total flux cleaned = -0.00126647 Jy ! Component: 150 - total flux cleaned = -0.00126747 Jy ! Component: 200 - total flux cleaned = -0.00121118 Jy ! Total flux subtracted in 200 components = -0.00121118 Jy ! Clean residual min=-0.007240 max=0.007643 Jy/beam ! Clean residual mean=0.000035 rms=0.001871 Jy/beam ! Combined flux in latest and established models = 0.155422 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 46 components and 0.155422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072300Jy sigma=1.052067 ! Fit after self-cal, rms=0.072274Jy sigma=1.052014 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072274Jy sigma=1.052014 ! Fit after self-cal, rms=0.066304Jy sigma=0.959868 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116145 Jy ! Component: 100 - total flux cleaned = 0.00122274 Jy ! Component: 150 - total flux cleaned = 0.00127875 Jy ! Component: 200 - total flux cleaned = 0.00132859 Jy ! Total flux subtracted in 200 components = 0.00132859 Jy ! Clean residual min=-0.006988 max=0.007515 Jy/beam ! Clean residual mean=0.000031 rms=0.001774 Jy/beam ! Combined flux in latest and established models = 0.15675 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 52 components and 0.15675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066249Jy sigma=0.957875 ! Fit after self-cal, rms=0.066301Jy sigma=0.951566 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.24 x 3.571 at 14.68 degrees (North through East) ! Clean map min=-0.0068625 max=0.11968 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066301Jy sigma=0.951566 ! Fit after self-cal, rms=0.065893Jy sigma=0.943670 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065893Jy sigma=0.943670 ! Fit after self-cal, rms=0.066080Jy sigma=0.943040 ! Inverting map and beam ! Estimated beam: bmin=1.203 mas, bmaj=3.553 mas, bpa=15.1 degrees ! Estimated noise=1.60189 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014083 Jy ! Component: 100 - total flux cleaned = 0.0014535 Jy ! Component: 150 - total flux cleaned = 0.0014539 Jy ! Component: 200 - total flux cleaned = 0.00140989 Jy ! Total flux subtracted in 200 components = 0.00140989 Jy ! Clean residual min=-0.006823 max=0.007164 Jy/beam ! Clean residual mean=0.000038 rms=0.001720 Jy/beam ! Combined flux in latest and established models = 0.15816 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 55 components and 0.15816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065992Jy sigma=0.941818 ! Fit after self-cal, rms=0.066070Jy sigma=0.941707 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066070Jy sigma=0.941707 ! Fit after self-cal, rms=0.066836Jy sigma=0.945084 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066836Jy sigma=0.945084 ! Fit after self-cal, rms=0.066871Jy sigma=0.945044 ! Inverting map and beam ! Estimated beam: bmin=1.19 mas, bmaj=3.554 mas, bpa=15.12 degrees ! Estimated noise=1.59639 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 7.07492e-05 Jy ! Component: 100 - total flux cleaned = 0.000163306 Jy ! Component: 150 - total flux cleaned = 0.000163212 Jy ! Component: 200 - total flux cleaned = 0.000164348 Jy ! Total flux subtracted in 200 components = 0.000164348 Jy ! Clean residual min=-0.006894 max=0.007232 Jy/beam ! Clean residual mean=0.000036 rms=0.001734 Jy/beam ! Combined flux in latest and established models = 0.158325 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 60 components and 0.158325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066817Jy sigma=0.944054 ! Fit after self-cal, rms=0.066814Jy sigma=0.944015 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.485 mas, bmaj=5.305 mas, bpa=-0.08346 degrees ! Estimated noise=1.84242 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000342935 Jy ! Component: 100 - total flux cleaned = 0.000375529 Jy ! Component: 150 - total flux cleaned = 0.000407388 Jy ! Component: 200 - total flux cleaned = 0.000436261 Jy ! Total flux subtracted in 200 components = 0.000436261 Jy ! Clean residual min=-0.007711 max=0.007113 Jy/beam ! Clean residual mean=0.000060 rms=0.002129 Jy/beam ! Combined flux in latest and established models = 0.158761 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 64 components and 0.158761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066786Jy sigma=0.943877 ! Fit after self-cal, rms=0.066746Jy sigma=0.943703 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9274 mas, bmaj=2.978 mas, bpa=18.79 degrees ! Estimated noise=2.18383 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.104456 Jy ! Component: 100 - total flux cleaned = 0.133138 Jy ! Component: 150 - total flux cleaned = 0.146643 Jy ! Component: 200 - total flux cleaned = 0.154337 Jy ! Total flux subtracted in 200 components = 0.154337 Jy ! Clean residual min=-0.007860 max=0.008830 Jy/beam ! Clean residual mean=0.000001 rms=0.002076 Jy/beam ! Combined flux in latest and established models = 0.154337 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.154337 Jy ! Inverting map and beam ! Estimated beam: bmin=1.19 mas, bmaj=3.554 mas, bpa=15.12 degrees ! Estimated noise=1.59639 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00311502 Jy ! Component: 100 - total flux cleaned = 0.00387219 Jy ! Component: 150 - total flux cleaned = 0.00415825 Jy ! Component: 200 - total flux cleaned = 0.00427946 Jy ! Total flux subtracted in 200 components = 0.00427946 Jy ! Clean residual min=-0.006919 max=0.007351 Jy/beam ! Clean residual mean=0.000036 rms=0.001750 Jy/beam ! Combined flux in latest and established models = 0.158616 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 42 components and 0.158616 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.485 mas, bmaj=5.305 mas, bpa=-0.08346 degrees ! Estimated noise=1.84242 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000664658 Jy ! Component: 100 - total flux cleaned = 0.000700886 Jy ! Component: 150 - total flux cleaned = 0.000701036 Jy ! Component: 200 - total flux cleaned = 0.000732091 Jy ! Total flux subtracted in 200 components = 0.000732091 Jy ! Clean residual min=-0.007592 max=0.007192 Jy/beam ! Clean residual mean=0.000060 rms=0.002141 Jy/beam ! Combined flux in latest and established models = 0.159348 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 49 components and 0.159348 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.19 mas, bmaj=3.554 mas, bpa=15.12 degrees ! Estimated noise=1.59639 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000356871 Jy ! Component: 100 - total flux cleaned = -0.000413826 Jy ! Component: 150 - total flux cleaned = -0.000415585 Jy ! Component: 200 - total flux cleaned = -0.0004656 Jy ! Total flux subtracted in 200 components = -0.0004656 Jy ! Clean residual min=-0.007052 max=0.007354 Jy/beam ! Clean residual mean=0.000036 rms=0.001740 Jy/beam ! Combined flux in latest and established models = 0.158883 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 55 components and 0.158883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066815Jy sigma=0.945126 ! Fit after self-cal, rms=0.066800Jy sigma=0.944877 wmodel J0939-1731_X_2004_05_27_yyk\_map.mod ! Writing 55 model components to file: J0939-1731_X_2004_05_27_yyk_map.mod wobs J0939-1731_X_2004_05_27_yyk\_uvs.fits ! Writing UV FITS file: J0939-1731_X_2004_05_27_yyk_uvs.fits wwins J0939-1731_X_2004_05_27_yyk\_map.win ! wwins: Wrote 1 windows to J0939-1731_X_2004_05_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000641236 Jy ! Component: 100 - total flux cleaned = 0.00142389 Jy ! Component: 150 - total flux cleaned = 0.00183815 Jy ! Component: 200 - total flux cleaned = 0.00174418 Jy ! Component: 250 - total flux cleaned = 0.00208583 Jy ! Component: 300 - total flux cleaned = 0.00232542 Jy ! Component: 350 - total flux cleaned = 0.00254866 Jy ! Component: 400 - total flux cleaned = 0.00275679 Jy ! Component: 450 - total flux cleaned = 0.00282123 Jy ! Component: 500 - total flux cleaned = 0.00320125 Jy ! Component: 550 - total flux cleaned = 0.00331954 Jy ! Component: 600 - total flux cleaned = 0.00355347 Jy ! Component: 650 - total flux cleaned = 0.00372349 Jy ! Component: 700 - total flux cleaned = 0.00377789 Jy ! Component: 750 - total flux cleaned = 0.00361834 Jy ! Component: 800 - total flux cleaned = 0.00351601 Jy ! Component: 850 - total flux cleaned = 0.00356763 Jy ! Component: 900 - total flux cleaned = 0.00351982 Jy ! Component: 950 - total flux cleaned = 0.0035203 Jy ! Component: 1000 - total flux cleaned = 0.00347274 Jy ! Component: 1050 - total flux cleaned = 0.00356399 Jy ! Component: 1100 - total flux cleaned = 0.00351989 Jy ! Component: 1150 - total flux cleaned = 0.00360874 Jy ! Component: 1200 - total flux cleaned = 0.00373899 Jy ! Component: 1250 - total flux cleaned = 0.00399275 Jy ! Component: 1300 - total flux cleaned = 0.00415809 Jy ! Component: 1350 - total flux cleaned = 0.00436273 Jy ! Component: 1400 - total flux cleaned = 0.00452433 Jy ! Component: 1450 - total flux cleaned = 0.00484072 Jy ! Component: 1500 - total flux cleaned = 0.00507375 Jy ! Component: 1550 - total flux cleaned = 0.00522673 Jy ! Component: 1600 - total flux cleaned = 0.00537809 Jy ! Component: 1650 - total flux cleaned = 0.00552741 Jy ! Component: 1700 - total flux cleaned = 0.00567454 Jy ! Component: 1750 - total flux cleaned = 0.00585623 Jy ! Component: 1800 - total flux cleaned = 0.00599894 Jy ! Component: 1850 - total flux cleaned = 0.00589308 Jy ! Component: 1900 - total flux cleaned = 0.00606745 Jy ! Component: 1950 - total flux cleaned = 0.00599819 Jy ! Component: 2000 - total flux cleaned = 0.00589582 Jy ! Total flux subtracted in 2048 components = 0.00579513 Jy ! Clean residual min=-0.001984 max=0.002014 Jy/beam ! Clean residual mean=0.000017 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.164678 Jy keep ! Adding 129 model components to the UV plane model. ! The established model now contains 184 components and 0.164678 Jy ![Exited script file: muppet] wmap "J0939-1731_X_2004_05_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.19 x 3.554 at 15.12 degrees (North through East) ! Clean map min=-0.0037114 max=0.11609 Jy/beam ! Writing clean map to FITS file: J0939-1731_X_2004_05_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.116094 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000616336 device "J0939-1731_X_2004_05_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J0939-1731_X_2004_05_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.59268 1.59268 3.18535 6.3707 12.7414 25.4828 50.9656 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.116 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.19 x 3.554 at 15.12 degrees (North through East) ! Clean map min=-0.0037114 max=0.11609 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0939-1731_X_2004_05_27_yyk\_map.gif/gif" ! Attempting to open device: 'J0939-1731_X_2004_05_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0939-1731_X_2004_05_27_yyk_uvs.log closed on Wed Dec 7 00:14:32 2005