! Started logfile: J0939-1731_S_2004_05_27_yyk_uvs.log on Wed Dec 7 00:14:24 2005 obs J0939-1731_S_2004_05_27_yyk_uve.fits ! Reading UV FITS file: J0939-1731_S_2004_05_27_yyk_uve.fits ! AN table 1: 6 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.866667 visibilities/baseline/integration-bin. ! Found source: J0939-1731 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1387 lines of history. ! ! Reading 936 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0939-1731_S_2004_05_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.155086 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.871111Jy sigma=14.961832 ! Fit after self-cal, rms=0.863894Jy sigma=14.876261 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.515 mas, bmaj=6.631 mas, bpa=-1.669 degrees ! Estimated noise=2.0155 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.115519 Jy ! Component: 100 - total flux cleaned = 0.140152 Jy ! Total flux subtracted in 100 components = 0.140152 Jy ! Clean residual min=-0.008328 max=0.009311 Jy/beam ! Clean residual mean=0.000070 rms=0.002465 Jy/beam ! Combined flux in latest and established models = 0.140152 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.140152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066550Jy sigma=1.041792 ! Fit after self-cal, rms=0.066509Jy sigma=1.041594 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.1 mas, bmaj=8.209 mas, bpa=-2.263 degrees ! Estimated noise=1.48807 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0161918 Jy ! Component: 100 - total flux cleaned = 0.0222008 Jy ! Component: 150 - total flux cleaned = 0.0247924 Jy ! Component: 200 - total flux cleaned = 0.0257192 Jy ! Total flux subtracted in 200 components = 0.0257192 Jy ! Clean residual min=-0.005517 max=0.007605 Jy/beam ! Clean residual mean=0.000066 rms=0.001857 Jy/beam ! Combined flux in latest and established models = 0.165871 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 47 components and 0.165871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064084Jy sigma=0.993131 ! Fit after self-cal, rms=0.064039Jy sigma=0.992947 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.993582 ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.03 HN 0.99 KP 0.99 ! LA 1.05 MK 0.98 NL 1.02 OV 1.06 ! PT 0.89 SC 0.95 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00349 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.08 KP 0.97 ! LA 1.01 MK 0.89 NL 1.10 OV 1.04 ! PT 0.94 SC 0.95 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.02041 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.96 HN 0.95 KP 0.93 ! LA 1.00* MK 0.96 NL 1.04 OV 0.96 ! PT 0.92 SC 1.06 ! ! ! Fit before self-cal, rms=0.064039Jy sigma=0.992947 ! Fit after self-cal, rms=0.063252Jy sigma=0.977685 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063252Jy sigma=0.977685 ! Fit after self-cal, rms=0.063273Jy sigma=0.977624 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.056 mas, bmaj=8.181 mas, bpa=-2.805 degrees ! Estimated noise=1.46826 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000342773 Jy ! Component: 100 - total flux cleaned = -0.000172535 Jy ! Component: 150 - total flux cleaned = -8.66525e-05 Jy ! Component: 200 - total flux cleaned = -1.18652e-05 Jy ! Total flux subtracted in 200 components = -1.18652e-05 Jy ! Clean residual min=-0.005106 max=0.006068 Jy/beam ! Clean residual mean=0.000029 rms=0.001582 Jy/beam ! Combined flux in latest and established models = 0.165859 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 58 components and 0.165859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063156Jy sigma=0.976278 ! Fit after self-cal, rms=0.063141Jy sigma=0.976252 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063141Jy sigma=0.976252 ! Fit after self-cal, rms=0.060707Jy sigma=0.940398 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000412431 Jy ! Component: 100 - total flux cleaned = 0.00057817 Jy ! Component: 150 - total flux cleaned = 0.000704696 Jy ! Component: 200 - total flux cleaned = 0.000748157 Jy ! Total flux subtracted in 200 components = 0.000748157 Jy ! Clean residual min=-0.004979 max=0.005674 Jy/beam ! Clean residual mean=0.000018 rms=0.001549 Jy/beam ! Combined flux in latest and established models = 0.166608 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 61 components and 0.166608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060678Jy sigma=0.939948 ! Fit after self-cal, rms=0.060570Jy sigma=0.938491 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.056 x 8.181 at -2.805 degrees (North through East) ! Clean map min=-0.0046466 max=0.13651 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060570Jy sigma=0.938491 ! Fit after self-cal, rms=0.059188Jy sigma=0.931737 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059188Jy sigma=0.931737 ! Fit after self-cal, rms=0.059179Jy sigma=0.931620 ! Inverting map and beam ! Estimated beam: bmin=2.99 mas, bmaj=8.106 mas, bpa=-3.555 degrees ! Estimated noise=1.43805 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00115918 Jy ! Component: 100 - total flux cleaned = -0.00105477 Jy ! Component: 150 - total flux cleaned = -0.00101565 Jy ! Component: 200 - total flux cleaned = -0.000920958 Jy ! Total flux subtracted in 200 components = -0.000920958 Jy ! Clean residual min=-0.004944 max=0.005451 Jy/beam ! Clean residual mean=0.000020 rms=0.001514 Jy/beam ! Combined flux in latest and established models = 0.165687 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 66 components and 0.165687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059051Jy sigma=0.929992 ! Fit after self-cal, rms=0.059047Jy sigma=0.929970 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059047Jy sigma=0.929970 ! Fit after self-cal, rms=0.058597Jy sigma=0.930432 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058597Jy sigma=0.930432 ! Fit after self-cal, rms=0.058599Jy sigma=0.930390 ! Inverting map and beam ! Estimated beam: bmin=2.949 mas, bmaj=8.06 mas, bpa=-3.629 degrees ! Estimated noise=1.41765 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00125193 Jy ! Component: 100 - total flux cleaned = -0.00104507 Jy ! Component: 150 - total flux cleaned = -0.000912552 Jy ! Component: 200 - total flux cleaned = -0.000828035 Jy ! Total flux subtracted in 200 components = -0.000828035 Jy ! Clean residual min=-0.005009 max=0.005278 Jy/beam ! Clean residual mean=0.000021 rms=0.001511 Jy/beam ! Combined flux in latest and established models = 0.164859 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 68 components and 0.164859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058516Jy sigma=0.929196 ! Fit after self-cal, rms=0.058513Jy sigma=0.929177 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.958 mas, bmaj=17.26 mas, bpa=-0.2419 degrees ! Estimated noise=1.88204 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180494 Jy ! Component: 100 - total flux cleaned = 0.00186852 Jy ! Component: 150 - total flux cleaned = 0.00192025 Jy ! Component: 200 - total flux cleaned = 0.00200583 Jy ! Total flux subtracted in 200 components = 0.00200583 Jy ! Clean residual min=-0.005634 max=0.005926 Jy/beam ! Clean residual mean=0.000028 rms=0.001991 Jy/beam ! Combined flux in latest and established models = 0.166864 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 76 components and 0.166864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058590Jy sigma=0.931089 ! Fit after self-cal, rms=0.058491Jy sigma=0.930224 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.461 mas, bmaj=6.598 mas, bpa=-2.402 degrees ! Estimated noise=1.91703 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.111603 Jy ! Component: 100 - total flux cleaned = 0.137586 Jy ! Component: 150 - total flux cleaned = 0.150033 Jy ! Component: 200 - total flux cleaned = 0.156723 Jy ! Total flux subtracted in 200 components = 0.156723 Jy ! Clean residual min=-0.006808 max=0.006770 Jy/beam ! Clean residual mean=0.000019 rms=0.001915 Jy/beam ! Combined flux in latest and established models = 0.156723 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.156723 Jy ! Inverting map and beam ! Estimated beam: bmin=2.949 mas, bmaj=8.06 mas, bpa=-3.629 degrees ! Estimated noise=1.41765 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, 1). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00853556 Jy ! Component: 100 - total flux cleaned = 0.011951 Jy ! Component: 150 - total flux cleaned = 0.0129333 Jy ! Component: 200 - total flux cleaned = 0.013492 Jy ! Total flux subtracted in 200 components = 0.013492 Jy ! Clean residual min=-0.004734 max=0.005028 Jy/beam ! Clean residual mean=-0.000010 rms=0.001355 Jy/beam ! Combined flux in latest and established models = 0.170215 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 79 components and 0.170215 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.958 mas, bmaj=17.26 mas, bpa=-0.2419 degrees ! Estimated noise=1.88204 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169488 Jy ! Component: 100 - total flux cleaned = 0.00169342 Jy ! Component: 150 - total flux cleaned = 0.00172259 Jy ! Component: 200 - total flux cleaned = 0.00169846 Jy ! Total flux subtracted in 200 components = 0.00169846 Jy ! Clean residual min=-0.005535 max=0.006765 Jy/beam ! Clean residual mean=-0.000033 rms=0.001792 Jy/beam ! Combined flux in latest and established models = 0.171913 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 92 components and 0.171913 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.949 mas, bmaj=8.06 mas, bpa=-3.629 degrees ! Estimated noise=1.41765 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000441351 Jy ! Component: 100 - total flux cleaned = -0.000600895 Jy ! Component: 150 - total flux cleaned = -0.000601711 Jy ! Component: 200 - total flux cleaned = -0.000650327 Jy ! Total flux subtracted in 200 components = -0.000650327 Jy ! Clean residual min=-0.004757 max=0.005174 Jy/beam ! Clean residual mean=-0.000014 rms=0.001339 Jy/beam ! Combined flux in latest and established models = 0.171263 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 104 components and 0.171263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057811Jy sigma=0.916686 ! Fit after self-cal, rms=0.057679Jy sigma=0.914418 wmodel J0939-1731_S_2004_05_27_yyk\_map.mod ! Writing 104 model components to file: J0939-1731_S_2004_05_27_yyk_map.mod wobs J0939-1731_S_2004_05_27_yyk\_uvs.fits ! Writing UV FITS file: J0939-1731_S_2004_05_27_yyk_uvs.fits wwins J0939-1731_S_2004_05_27_yyk\_map.win ! wwins: Wrote 2 windows to J0939-1731_S_2004_05_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139088 Jy ! Component: 100 - total flux cleaned = 0.00233755 Jy ! Component: 150 - total flux cleaned = 0.00299733 Jy ! Component: 200 - total flux cleaned = 0.00369517 Jy ! Component: 250 - total flux cleaned = 0.00422944 Jy ! Component: 300 - total flux cleaned = 0.0048079 Jy ! Component: 350 - total flux cleaned = 0.00555333 Jy ! Component: 400 - total flux cleaned = 0.00627244 Jy ! Component: 450 - total flux cleaned = 0.00662119 Jy ! Component: 500 - total flux cleaned = 0.00684855 Jy ! Component: 550 - total flux cleaned = 0.00701371 Jy ! Component: 600 - total flux cleaned = 0.00685297 Jy ! Component: 650 - total flux cleaned = 0.00674905 Jy ! Component: 700 - total flux cleaned = 0.00690366 Jy ! Component: 750 - total flux cleaned = 0.00685145 Jy ! Component: 800 - total flux cleaned = 0.00680124 Jy ! Component: 850 - total flux cleaned = 0.00665577 Jy ! Component: 900 - total flux cleaned = 0.00656178 Jy ! Component: 950 - total flux cleaned = 0.00660905 Jy ! Component: 1000 - total flux cleaned = 0.00647131 Jy ! Component: 1050 - total flux cleaned = 0.00638079 Jy ! Component: 1100 - total flux cleaned = 0.0063808 Jy ! Component: 1150 - total flux cleaned = 0.0062928 Jy ! Component: 1200 - total flux cleaned = 0.00607733 Jy ! Component: 1250 - total flux cleaned = 0.00586527 Jy ! Component: 1300 - total flux cleaned = 0.00553227 Jy ! Component: 1350 - total flux cleaned = 0.00549167 Jy ! Component: 1400 - total flux cleaned = 0.00532918 Jy ! Component: 1450 - total flux cleaned = 0.00516939 Jy ! Component: 1500 - total flux cleaned = 0.00505076 Jy ! Component: 1550 - total flux cleaned = 0.00493449 Jy ! Component: 1600 - total flux cleaned = 0.00478063 Jy ! Component: 1650 - total flux cleaned = 0.00470554 Jy ! Component: 1700 - total flux cleaned = 0.00466853 Jy ! Component: 1750 - total flux cleaned = 0.00466857 Jy ! Component: 1800 - total flux cleaned = 0.00455848 Jy ! Component: 1850 - total flux cleaned = 0.00445057 Jy ! Component: 1900 - total flux cleaned = 0.00437905 Jy ! Component: 1950 - total flux cleaned = 0.00423789 Jy ! Component: 2000 - total flux cleaned = 0.00416807 Jy ! Total flux subtracted in 2048 components = 0.00399526 Jy ! Clean residual min=-0.002797 max=0.001926 Jy/beam ! Clean residual mean=-0.000028 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.175258 Jy keep ! Adding 131 model components to the UV plane model. ! The established model now contains 235 components and 0.175258 Jy ![Exited script file: muppet] wmap "J0939-1731_S_2004_05_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.949 x 8.06 at -3.629 degrees (North through East) ! Clean map min=-0.0037352 max=0.13063 Jy/beam ! Writing clean map to FITS file: J0939-1731_S_2004_05_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.13063 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000705653 device "J0939-1731_S_2004_05_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J0939-1731_S_2004_05_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.62058 1.62058 3.24115 6.48231 12.9646 25.9292 51.8585 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.13 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.949 x 8.06 at -3.629 degrees (North through East) ! Clean map min=-0.0037352 max=0.13063 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0939-1731_S_2004_05_27_yyk\_map.gif/gif" ! Attempting to open device: 'J0939-1731_S_2004_05_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0939-1731_S_2004_05_27_yyk_uvs.log closed on Wed Dec 7 00:14:28 2005