! Started logfile: J0932-3405_S_2004_04_30_yyk_uvs.log on Wed Dec  7 01:03:19 2005
obs J0932-3405_S_2004_04_30_yyk_uve.fits
! Reading UV FITS file: J0932-3405_S_2004_04_30_yyk_uve.fits
! AN table 1: 4 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.533333 visibilities/baseline/integration-bin.
! Found source: J0932-3405
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1629 lines of history.
! 
! Reading 384 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0932-3405_S_2004_04_30_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 256x256 pixels with 2.00x2.00 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.222624 Jy 
startmod ,phase_soltime
! Applying default point source starting model.
! Performing phase self-cal over 10 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 16 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.799486Jy  sigma=11.865916
! Fit after  self-cal, rms=0.799067Jy  sigma=11.858508
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.77 mas, bmaj=40.56 mas, bpa=-4.459 degrees
! Estimated noise=3.54003 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.17003 Jy
! Component: 100  -  total flux cleaned = 0.207264 Jy
! Total flux subtracted in 100 components = 0.207264 Jy
! Clean residual min=-0.012703 max=0.014936 Jy/beam
! Clean residual mean=0.000052 rms=0.004000 Jy/beam
! Combined flux in latest and established models = 0.207264 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.207264 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082094Jy  sigma=1.094169
! Fit after  self-cal, rms=0.082079Jy  sigma=1.093995
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.601 mas, bmaj=41.28 mas, bpa=-3.738 degrees
! Estimated noise=2.74895 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0170365 Jy
! Component: 100  -  total flux cleaned = 0.0270004 Jy
! Component: 150  -  total flux cleaned = 0.0335629 Jy
! Component: 200  -  total flux cleaned = 0.0381246 Jy
! Total flux subtracted in 200 components = 0.0381247 Jy
! Clean residual min=-0.009303 max=0.009604 Jy/beam
! Clean residual mean=0.000107 rms=0.003136 Jy/beam
! Combined flux in latest and established models = 0.245389 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 39 model components to the UV plane model.
! The established model now contains 50 components and 0.245388 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078887Jy  sigma=1.047175
! Fit after  self-cal, rms=0.078871Jy  sigma=1.046904
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
selflims ampcor_selflim
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1.00082
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.86     FD        1.02     HN        1.00*    KP        0.95     
!   LA        1.09     MK        1.00*    NL        1.00     OV        1.12     
!   PT        0.94     SC        1.00*    
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1.02998
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.93     HN        1.00*    KP        0.89     
!   LA        1.00*    MK        1.00*    NL        1.01     OV        0.92     
!   PT        0.99     SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.078871Jy  sigma=1.046904
! Fit after  self-cal, rms=0.075895Jy  sigma=1.026046
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075895Jy  sigma=1.026046
! Fit after  self-cal, rms=0.075895Jy  sigma=1.025992
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.672 mas, bmaj=40.66 mas, bpa=-3.49 degrees
! Estimated noise=2.72703 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00415126 Jy
! Component: 100  -  total flux cleaned = 0.00640908 Jy
! Component: 150  -  total flux cleaned = 0.0069278 Jy
! Component: 200  -  total flux cleaned = 0.00720507 Jy
! Total flux subtracted in 200 components = 0.00720507 Jy
! Clean residual min=-0.007974 max=0.007406 Jy/beam
! Clean residual mean=0.000081 rms=0.002617 Jy/beam
! Combined flux in latest and established models = 0.252594 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 60 components and 0.252594 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075763Jy  sigma=1.022998
! Fit after  self-cal, rms=0.075763Jy  sigma=1.022929
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075763Jy  sigma=1.022929
! Fit after  self-cal, rms=0.071528Jy  sigma=0.959895
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00154892 Jy
! Component: 100  -  total flux cleaned = 0.00207904 Jy
! Component: 150  -  total flux cleaned = 0.00239048 Jy
! Component: 200  -  total flux cleaned = 0.00262782 Jy
! Total flux subtracted in 200 components = 0.00262782 Jy
! Clean residual min=-0.008205 max=0.007447 Jy/beam
! Clean residual mean=0.000088 rms=0.002604 Jy/beam
! Combined flux in latest and established models = 0.255221 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 63 components and 0.255221 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071362Jy  sigma=0.958859
! Fit after  self-cal, rms=0.071206Jy  sigma=0.954944
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.672 x 40.66 at -3.49 degrees (North through East)
! Clean map  min=-0.0081762  max=0.20263 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071206Jy  sigma=0.954944
! Fit after  self-cal, rms=0.069798Jy  sigma=0.950617
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069798Jy  sigma=0.950617
! Fit after  self-cal, rms=0.069813Jy  sigma=0.950297
! Inverting map and beam 
! Estimated beam: bmin=9.637 mas, bmaj=40.33 mas, bpa=-3.413 degrees
! Estimated noise=2.6957 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.26855e-05 Jy
! Component: 100  -  total flux cleaned = 0.00054321 Jy
! Component: 150  -  total flux cleaned = 0.000639641 Jy
! Component: 200  -  total flux cleaned = 0.000725324 Jy
! Total flux subtracted in 200 components = 0.000725324 Jy
! Clean residual min=-0.008058 max=0.007214 Jy/beam
! Clean residual mean=0.000076 rms=0.002514 Jy/beam
! Combined flux in latest and established models = 0.255947 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 69 components and 0.255947 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069843Jy  sigma=0.949010
! Fit after  self-cal, rms=0.069855Jy  sigma=0.948944
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069855Jy  sigma=0.948944
! Fit after  self-cal, rms=0.068667Jy  sigma=0.916019
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068667Jy  sigma=0.916019
! Fit after  self-cal, rms=0.068693Jy  sigma=0.915865
! Inverting map and beam 
! Estimated beam: bmin=9.731 mas, bmaj=39.82 mas, bpa=-2.925 degrees
! Estimated noise=2.67167 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -4.22673e-05 Jy
! Component: 100  -  total flux cleaned = 4.21672e-05 Jy
! Component: 150  -  total flux cleaned = 0.00030552 Jy
! Component: 200  -  total flux cleaned = 0.000429725 Jy
! Total flux subtracted in 200 components = 0.000429725 Jy
! Clean residual min=-0.007329 max=0.006249 Jy/beam
! Clean residual mean=0.000014 rms=0.002139 Jy/beam
! Combined flux in latest and established models = 0.256376 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 80 components and 0.256377 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068531Jy  sigma=0.913346
! Fit after  self-cal, rms=0.068527Jy  sigma=0.913328
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.16 mas, bmaj=40.29 mas, bpa=-1.342 degrees
! Estimated noise=2.71458 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000150748 Jy
! Component: 100  -  total flux cleaned = -3.97124e-05 Jy
! Component: 150  -  total flux cleaned = 3.47991e-05 Jy
! Component: 200  -  total flux cleaned = 8.07498e-05 Jy
! Total flux subtracted in 200 components = 8.07498e-05 Jy
! Clean residual min=-0.007608 max=0.005867 Jy/beam
! Clean residual mean=0.000020 rms=0.002172 Jy/beam
! Combined flux in latest and established models = 0.256457 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 87 components and 0.256457 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068503Jy  sigma=0.913091
! Fit after  self-cal, rms=0.068504Jy  sigma=0.913081
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.81 mas, bmaj=39.64 mas, bpa=-4.137 degrees
! Estimated noise=3.46352 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.167049 Jy
! Component: 100  -  total flux cleaned = 0.20383 Jy
! Component: 150  -  total flux cleaned = 0.221406 Jy
! Component: 200  -  total flux cleaned = 0.232618 Jy
! Total flux subtracted in 200 components = 0.232618 Jy
! Clean residual min=-0.009663 max=0.010449 Jy/beam
! Clean residual mean=0.000011 rms=0.002938 Jy/beam
! Combined flux in latest and established models = 0.232618 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 40 model components to the UV plane model.
! The established model now contains 40 components and 0.232618 Jy
! Inverting map and beam 
! Estimated beam: bmin=9.731 mas, bmaj=39.82 mas, bpa=-2.925 degrees
! Estimated noise=2.67167 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00890565 Jy
! Component: 100  -  total flux cleaned = 0.0142235 Jy
! Component: 150  -  total flux cleaned = 0.0177152 Jy
! Component: 200  -  total flux cleaned = 0.0200649 Jy
! Total flux subtracted in 200 components = 0.0200649 Jy
! Clean residual min=-0.007826 max=0.006370 Jy/beam
! Clean residual mean=0.000017 rms=0.002280 Jy/beam
! Combined flux in latest and established models = 0.252683 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 54 components and 0.252683 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.16 mas, bmaj=40.29 mas, bpa=-1.342 degrees
! Estimated noise=2.71458 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00075753 Jy
! Component: 100  -  total flux cleaned = 0.00112894 Jy
! Component: 150  -  total flux cleaned = 0.00140281 Jy
! Component: 200  -  total flux cleaned = 0.00152932 Jy
! Total flux subtracted in 200 components = 0.00152932 Jy
! Clean residual min=-0.007998 max=0.006094 Jy/beam
! Clean residual mean=0.000019 rms=0.002273 Jy/beam
! Combined flux in latest and established models = 0.254212 Jy
! Adding 12 model components to the UV plane model.
! The established model now contains 62 components and 0.254212 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=9.731 mas, bmaj=39.82 mas, bpa=-2.925 degrees
! Estimated noise=2.67167 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000305872 Jy
! Component: 100  -  total flux cleaned = 0.000355176 Jy
! Component: 150  -  total flux cleaned = 0.000499894 Jy
! Component: 200  -  total flux cleaned = 0.00059204 Jy
! Total flux subtracted in 200 components = 0.00059204 Jy
! Clean residual min=-0.007604 max=0.006119 Jy/beam
! Clean residual mean=0.000013 rms=0.002228 Jy/beam
! Combined flux in latest and established models = 0.254804 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 73 components and 0.254804 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068688Jy  sigma=0.915698
! Fit after  self-cal, rms=0.068678Jy  sigma=0.915633
wmodel J0932-3405_S_2004_04_30_yyk\_map.mod
! Writing 73 model components to file: J0932-3405_S_2004_04_30_yyk_map.mod
wobs J0932-3405_S_2004_04_30_yyk\_uvs.fits
! Writing UV FITS file: J0932-3405_S_2004_04_30_yyk_uvs.fits
wwins J0932-3405_S_2004_04_30_yyk\_map.win
! wwins: Wrote 1 windows to J0932-3405_S_2004_04_30_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=1024  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00331069 Jy
! Component: 100  -  total flux cleaned = -0.00506787 Jy
! Component: 150  -  total flux cleaned = -0.00612871 Jy
! Component: 200  -  total flux cleaned = -0.00707454 Jy
! Component: 250  -  total flux cleaned = -0.00747644 Jy
! Component: 300  -  total flux cleaned = -0.00747968 Jy
! Component: 350  -  total flux cleaned = -0.00720073 Jy
! Component: 400  -  total flux cleaned = -0.00693513 Jy
! Component: 450  -  total flux cleaned = -0.0070618 Jy
! Component: 500  -  total flux cleaned = -0.0074293 Jy
! Component: 550  -  total flux cleaned = -0.00760624 Jy
! Component: 600  -  total flux cleaned = -0.0076624 Jy
! Component: 650  -  total flux cleaned = -0.00777509 Jy
! Component: 700  -  total flux cleaned = -0.00799176 Jy
! Component: 750  -  total flux cleaned = -0.00793825 Jy
! Component: 800  -  total flux cleaned = -0.00798907 Jy
! Component: 850  -  total flux cleaned = -0.00793836 Jy
! Component: 900  -  total flux cleaned = -0.00803384 Jy
! Component: 950  -  total flux cleaned = -0.00808047 Jy
! Component: 1000  -  total flux cleaned = -0.00840777 Jy
! Total flux subtracted in 1024 components = -0.00849991 Jy
! Clean residual min=-0.002562 max=0.002804 Jy/beam
! Clean residual mean=-0.000009 rms=0.000993 Jy/beam
! Combined flux in latest and established models = 0.246304 Jy
keep
! Adding 66 model components to the UV plane model.
! The established model now contains 139 components and 0.246304 Jy
![Exited script file: muppet]
wmap "J0932-3405_S_2004_04_30_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.731 x 39.82 at -2.925 degrees (North through East)
! Clean map  min=-0.0056037  max=0.19932 Jy/beam
! Writing clean map to FITS file: J0932-3405_S_2004_04_30_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.199318 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000962918 
device "J0932-3405_S_2004_04_30_yyk\_map.eps/VPS"
! Attempting to open device: 'J0932-3405_S_2004_04_30_yyk_map.eps/VPS'
loglevs 1*100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.44932 1.44932 2.89863 5.79726 11.5945 23.189 46.3781 92.7562
print "clev=",int(1*3*image_rms*10000)/10000
! clev= 0.0028 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.199 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.731 x 39.82 at -2.925 degrees (North through East)
! Clean map  min=-0.0056037  max=0.19932 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0932-3405_S_2004_04_30_yyk\_map.gif/gif"
! Attempting to open device: 'J0932-3405_S_2004_04_30_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0932-3405_S_2004_04_30_yyk_uvs.log closed on Wed Dec  7 01:03:20 2005