! Started logfile: J0927-2034_S_2004_05_27_yyk_uvs.log on Wed Dec 7 00:13:37 2005 obs J0927-2034_S_2004_05_27_yyk_uve.fits ! Reading UV FITS file: J0927-2034_S_2004_05_27_yyk_uve.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.95 visibilities/baseline/integration-bin. ! Found source: J0927-2034 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1382 lines of history. ! ! Reading 1368 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0927-2034_S_2004_05_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.303243 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.727658Jy sigma=11.264244 ! Fit after self-cal, rms=0.720969Jy sigma=11.206609 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.501 mas, bmaj=6.698 mas, bpa=-1.026 degrees ! Estimated noise=1.8291 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.236112 Jy ! Component: 100 - total flux cleaned = 0.285932 Jy ! Total flux subtracted in 100 components = 0.285932 Jy ! Clean residual min=-0.011972 max=0.014872 Jy/beam ! Clean residual mean=-0.000092 rms=0.002996 Jy/beam ! Combined flux in latest and established models = 0.285932 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.285932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093391Jy sigma=1.210563 ! Fit after self-cal, rms=0.093286Jy sigma=1.209355 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.35 mas, bmaj=8.749 mas, bpa=-4.097 degrees ! Estimated noise=1.22774 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0245041 Jy ! Component: 100 - total flux cleaned = 0.0338181 Jy ! Component: 150 - total flux cleaned = 0.0375376 Jy ! Component: 200 - total flux cleaned = 0.0381381 Jy ! Total flux subtracted in 200 components = 0.0381381 Jy ! Clean residual min=-0.007465 max=0.008331 Jy/beam ! Clean residual mean=-0.000151 rms=0.002008 Jy/beam ! Combined flux in latest and established models = 0.32407 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 54 components and 0.32407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087812Jy sigma=1.129994 ! Fit after self-cal, rms=0.087786Jy sigma=1.129466 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.99504 ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.07 HN 0.94 KP 1.00 ! LA 1.06 MK 0.99 NL 0.98 OV 0.96 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.984728 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 1.05 KP 1.00 ! LA 1.04 MK 1.04 NL 1.02 OV 1.02 ! PT 0.98 SC 0.92 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.087786Jy sigma=1.129466 ! Fit after self-cal, rms=0.086926Jy sigma=1.114067 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086926Jy sigma=1.114067 ! Fit after self-cal, rms=0.086926Jy sigma=1.114042 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.321 mas, bmaj=8.656 mas, bpa=-3.536 degrees ! Estimated noise=1.23248 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00371726 Jy ! Component: 100 - total flux cleaned = 0.00410057 Jy ! Component: 150 - total flux cleaned = 0.00441373 Jy ! Component: 200 - total flux cleaned = 0.00452217 Jy ! Total flux subtracted in 200 components = 0.00452217 Jy ! Clean residual min=-0.006426 max=0.006409 Jy/beam ! Clean residual mean=-0.000104 rms=0.001806 Jy/beam ! Combined flux in latest and established models = 0.328592 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 62 components and 0.328592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086620Jy sigma=1.111587 ! Fit after self-cal, rms=0.086594Jy sigma=1.111463 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086594Jy sigma=1.111463 ! Fit after self-cal, rms=0.084434Jy sigma=1.081409 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000658102 Jy ! Component: 100 - total flux cleaned = 0.000702384 Jy ! Component: 150 - total flux cleaned = 0.00078188 Jy ! Component: 200 - total flux cleaned = 0.00082105 Jy ! Total flux subtracted in 200 components = 0.00082105 Jy ! Clean residual min=-0.006242 max=0.006567 Jy/beam ! Clean residual mean=-0.000106 rms=0.001800 Jy/beam ! Combined flux in latest and established models = 0.329413 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 66 components and 0.329413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084363Jy sigma=1.080808 ! Fit after self-cal, rms=0.084214Jy sigma=1.078495 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.321 x 8.656 at -3.536 degrees (North through East) ! Clean map min=-0.005873 max=0.27314 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084214Jy sigma=1.078495 ! Fit after self-cal, rms=0.084755Jy sigma=1.070371 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084755Jy sigma=1.070371 ! Fit after self-cal, rms=0.084752Jy sigma=1.070160 ! Inverting map and beam ! Estimated beam: bmin=3.296 mas, bmaj=8.584 mas, bpa=-3.557 degrees ! Estimated noise=1.24806 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00480634 Jy ! Component: 100 - total flux cleaned = 0.00659851 Jy ! Component: 150 - total flux cleaned = 0.00687481 Jy ! Component: 200 - total flux cleaned = 0.00700939 Jy ! Total flux subtracted in 200 components = 0.00700939 Jy ! Clean residual min=-0.006138 max=0.006625 Jy/beam ! Clean residual mean=-0.000095 rms=0.001849 Jy/beam ! Combined flux in latest and established models = 0.336422 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 71 components and 0.336422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084277Jy sigma=1.066876 ! Fit after self-cal, rms=0.084268Jy sigma=1.066783 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084268Jy sigma=1.066783 ! Fit after self-cal, rms=0.083828Jy sigma=1.043170 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083828Jy sigma=1.043170 ! Fit after self-cal, rms=0.083829Jy sigma=1.043120 ! Inverting map and beam ! Estimated beam: bmin=3.285 mas, bmaj=8.539 mas, bpa=-3.155 degrees ! Estimated noise=1.26129 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00384739 Jy ! Component: 100 - total flux cleaned = 0.00481961 Jy ! Component: 150 - total flux cleaned = 0.00485634 Jy ! Component: 200 - total flux cleaned = 0.00485651 Jy ! Total flux subtracted in 200 components = 0.00485651 Jy ! Clean residual min=-0.006086 max=0.005743 Jy/beam ! Clean residual mean=-0.000069 rms=0.001634 Jy/beam ! Combined flux in latest and established models = 0.341279 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 78 components and 0.341279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083496Jy sigma=1.040935 ! Fit after self-cal, rms=0.083488Jy sigma=1.040882 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.902 mas, bmaj=18.74 mas, bpa=4.851 degrees ! Estimated noise=1.56768 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139859 Jy ! Component: 100 - total flux cleaned = 0.00139851 Jy ! Component: 150 - total flux cleaned = 0.00154391 Jy ! Component: 200 - total flux cleaned = 0.00167801 Jy ! Total flux subtracted in 200 components = 0.00167801 Jy ! Clean residual min=-0.006183 max=0.007475 Jy/beam ! Clean residual mean=-0.000121 rms=0.002165 Jy/beam ! Combined flux in latest and established models = 0.342957 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 84 components and 0.342957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083501Jy sigma=1.041252 ! Fit after self-cal, rms=0.083466Jy sigma=1.040794 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.48 mas, bmaj=6.644 mas, bpa=-0.5098 degrees ! Estimated noise=1.85125 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.24133 Jy ! Component: 100 - total flux cleaned = 0.294597 Jy ! Component: 150 - total flux cleaned = 0.317286 Jy ! Component: 200 - total flux cleaned = 0.329213 Jy ! Total flux subtracted in 200 components = 0.329213 Jy ! Clean residual min=-0.007850 max=0.008469 Jy/beam ! Clean residual mean=-0.000049 rms=0.002084 Jy/beam ! Combined flux in latest and established models = 0.329213 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 48 model components to the UV plane model. ! The established model now contains 48 components and 0.329213 Jy ! Inverting map and beam ! Estimated beam: bmin=3.285 mas, bmaj=8.539 mas, bpa=-3.155 degrees ! Estimated noise=1.26129 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.5, 11.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.01003 Jy ! Component: 100 - total flux cleaned = 0.0153177 Jy ! Component: 150 - total flux cleaned = 0.0172913 Jy ! Component: 200 - total flux cleaned = 0.0178408 Jy ! Total flux subtracted in 200 components = 0.0178408 Jy ! Clean residual min=-0.005428 max=0.004225 Jy/beam ! Clean residual mean=-0.000065 rms=0.001470 Jy/beam ! Combined flux in latest and established models = 0.347054 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 68 components and 0.347054 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.902 mas, bmaj=18.74 mas, bpa=4.851 degrees ! Estimated noise=1.56768 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00248797 Jy ! Component: 100 - total flux cleaned = 0.00262516 Jy ! Component: 150 - total flux cleaned = 0.00267658 Jy ! Component: 200 - total flux cleaned = 0.00272099 Jy ! Total flux subtracted in 200 components = 0.00272099 Jy ! Clean residual min=-0.005428 max=0.005263 Jy/beam ! Clean residual mean=-0.000110 rms=0.001866 Jy/beam ! Combined flux in latest and established models = 0.349775 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 83 components and 0.349775 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.285 mas, bmaj=8.539 mas, bpa=-3.155 degrees ! Estimated noise=1.26129 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000152471 Jy ! Component: 100 - total flux cleaned = -0.000157327 Jy ! Component: 150 - total flux cleaned = -0.000223093 Jy ! Component: 200 - total flux cleaned = -0.000278579 Jy ! Total flux subtracted in 200 components = -0.000278579 Jy ! Clean residual min=-0.005243 max=0.004624 Jy/beam ! Clean residual mean=-0.000067 rms=0.001426 Jy/beam ! Combined flux in latest and established models = 0.349496 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 95 components and 0.349496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082824Jy sigma=1.030536 ! Fit after self-cal, rms=0.082749Jy sigma=1.029663 wmodel J0927-2034_S_2004_05_27_yyk\_map.mod ! Writing 95 model components to file: J0927-2034_S_2004_05_27_yyk_map.mod wobs J0927-2034_S_2004_05_27_yyk\_uvs.fits ! Writing UV FITS file: J0927-2034_S_2004_05_27_yyk_uvs.fits wwins J0927-2034_S_2004_05_27_yyk\_map.win ! wwins: Wrote 2 windows to J0927-2034_S_2004_05_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00232061 Jy ! Component: 100 - total flux cleaned = -0.00387566 Jy ! Component: 150 - total flux cleaned = -0.0050091 Jy ! Component: 200 - total flux cleaned = -0.00565296 Jy ! Component: 250 - total flux cleaned = -0.00619823 Jy ! Component: 300 - total flux cleaned = -0.00666114 Jy ! Component: 350 - total flux cleaned = -0.00691858 Jy ! Component: 400 - total flux cleaned = -0.00710624 Jy ! Component: 450 - total flux cleaned = -0.00716682 Jy ! Component: 500 - total flux cleaned = -0.00722578 Jy ! Component: 550 - total flux cleaned = -0.00739841 Jy ! Component: 600 - total flux cleaned = -0.00773259 Jy ! Component: 650 - total flux cleaned = -0.00778449 Jy ! Component: 700 - total flux cleaned = -0.00773034 Jy ! Component: 750 - total flux cleaned = -0.00773017 Jy ! Component: 800 - total flux cleaned = -0.00767897 Jy ! Component: 850 - total flux cleaned = -0.00793457 Jy ! Component: 900 - total flux cleaned = -0.00833561 Jy ! Component: 950 - total flux cleaned = -0.00858174 Jy ! Component: 1000 - total flux cleaned = -0.0089235 Jy ! Component: 1050 - total flux cleaned = -0.00935596 Jy ! Component: 1100 - total flux cleaned = -0.00978175 Jy ! Component: 1150 - total flux cleaned = -0.0101545 Jy ! Component: 1200 - total flux cleaned = -0.0104767 Jy ! Component: 1250 - total flux cleaned = -0.0108857 Jy ! Component: 1300 - total flux cleaned = -0.0111564 Jy ! Component: 1350 - total flux cleaned = -0.0117761 Jy ! Component: 1400 - total flux cleaned = -0.0119941 Jy ! Component: 1450 - total flux cleaned = -0.0123392 Jy ! Component: 1500 - total flux cleaned = -0.0126379 Jy ! Component: 1550 - total flux cleaned = -0.0128489 Jy ! Component: 1600 - total flux cleaned = -0.0133477 Jy ! Component: 1650 - total flux cleaned = -0.0135533 Jy ! Component: 1700 - total flux cleaned = -0.0139998 Jy ! Component: 1750 - total flux cleaned = -0.0144807 Jy ! Component: 1800 - total flux cleaned = -0.0147974 Jy ! Component: 1850 - total flux cleaned = -0.0150321 Jy ! Component: 1900 - total flux cleaned = -0.0154195 Jy ! Component: 1950 - total flux cleaned = -0.0157646 Jy ! Component: 2000 - total flux cleaned = -0.0161436 Jy ! Total flux subtracted in 2048 components = -0.0164444 Jy ! Clean residual min=-0.001976 max=0.002122 Jy/beam ! Clean residual mean=-0.000052 rms=0.000771 Jy/beam ! Combined flux in latest and established models = 0.333052 Jy keep ! Adding 139 model components to the UV plane model. ! The established model now contains 234 components and 0.333052 Jy ![Exited script file: muppet] wmap "J0927-2034_S_2004_05_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.285 x 8.539 at -3.155 degrees (North through East) ! Clean map min=-0.0053711 max=0.2804 Jy/beam ! Writing clean map to FITS file: J0927-2034_S_2004_05_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.280403 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000755948 device "J0927-2034_S_2004_05_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J0927-2034_S_2004_05_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.80878 0.80878 1.61756 3.23512 6.47024 12.9405 25.881 51.7619 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.28 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.285 x 8.539 at -3.155 degrees (North through East) ! Clean map min=-0.0053711 max=0.2804 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0927-2034_S_2004_05_27_yyk\_map.gif/gif" ! Attempting to open device: 'J0927-2034_S_2004_05_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0927-2034_S_2004_05_27_yyk_uvs.log closed on Wed Dec 7 00:13:41 2005