! Started logfile: J0927-2034_S_2004_05_08_yyk_uvs.log on Wed Dec 7 00:13:33 2005 obs J0927-2034_S_2004_05_08_yyk_uve.fits ! Reading UV FITS file: J0927-2034_S_2004_05_08_yyk_uve.fits ! AN table 1: 5 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.773333 visibilities/baseline/integration-bin. ! Found source: J0927-2034 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1438 lines of history. ! ! Reading 696 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0927-2034_S_2004_05_08_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.260391 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.758895Jy sigma=12.979878 ! Fit after self-cal, rms=0.758769Jy sigma=12.978437 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.568 mas, bmaj=6.69 mas, bpa=-1.197 degrees ! Estimated noise=2.20346 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.20407 Jy ! Component: 100 - total flux cleaned = 0.247689 Jy ! Total flux subtracted in 100 components = 0.247689 Jy ! Clean residual min=-0.010468 max=0.012482 Jy/beam ! Clean residual mean=-0.000083 rms=0.003001 Jy/beam ! Combined flux in latest and established models = 0.247689 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.247689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079158Jy sigma=1.124411 ! Fit after self-cal, rms=0.079123Jy sigma=1.123802 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.124 mas, bmaj=8.448 mas, bpa=-4.151 degrees ! Estimated noise=1.68702 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0207532 Jy ! Component: 100 - total flux cleaned = 0.0278429 Jy ! Component: 150 - total flux cleaned = 0.0306074 Jy ! Component: 200 - total flux cleaned = 0.0310224 Jy ! Total flux subtracted in 200 components = 0.0310224 Jy ! Clean residual min=-0.006809 max=0.008379 Jy/beam ! Clean residual mean=-0.000149 rms=0.002144 Jy/beam ! Combined flux in latest and established models = 0.278712 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 44 components and 0.278712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075469Jy sigma=1.051342 ! Fit after self-cal, rms=0.075470Jy sigma=1.051043 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.999435 ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.05 HN 0.94 KP 0.96 ! LA 1.07 MK 0.97 NL 0.99 OV 0.92 ! PT 1.05 SC 0.88 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.977324 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.96 HN 1.09 KP 0.99 ! LA 1.06 MK 1.09 NL 1.02 OV 1.03 ! PT 0.91 SC 1.04 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.991935 ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.91 HN 0.94 KP 1.01 ! LA 0.97 MK 0.99 NL 1.08 OV 1.01 ! PT 1.03 SC 1.02 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.03344 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.92 HN 1.00 KP 0.93 ! LA 1.00* MK 1.02 NL 0.95 OV 0.90 ! PT 0.96 SC 1.04 ! ! ! Fit before self-cal, rms=0.075470Jy sigma=1.051043 ! Fit after self-cal, rms=0.072729Jy sigma=0.990797 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072729Jy sigma=0.990797 ! Fit after self-cal, rms=0.072746Jy sigma=0.990743 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.141 mas, bmaj=8.548 mas, bpa=-3.692 degrees ! Estimated noise=1.67441 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00185092 Jy ! Component: 100 - total flux cleaned = -0.0020877 Jy ! Component: 150 - total flux cleaned = -0.00208394 Jy ! Component: 200 - total flux cleaned = -0.00204008 Jy ! Total flux subtracted in 200 components = -0.00204008 Jy ! Clean residual min=-0.005352 max=0.005665 Jy/beam ! Clean residual mean=-0.000045 rms=0.001629 Jy/beam ! Combined flux in latest and established models = 0.276672 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 52 components and 0.276672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072725Jy sigma=0.989111 ! Fit after self-cal, rms=0.072731Jy sigma=0.989012 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072731Jy sigma=0.989012 ! Fit after self-cal, rms=0.068573Jy sigma=0.934208 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000616519 Jy ! Component: 100 - total flux cleaned = 0.000658287 Jy ! Component: 150 - total flux cleaned = 0.00065742 Jy ! Component: 200 - total flux cleaned = 0.000688469 Jy ! Total flux subtracted in 200 components = 0.000688469 Jy ! Clean residual min=-0.005078 max=0.005658 Jy/beam ! Clean residual mean=-0.000042 rms=0.001573 Jy/beam ! Combined flux in latest and established models = 0.27736 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 56 components and 0.27736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068588Jy sigma=0.933543 ! Fit after self-cal, rms=0.068347Jy sigma=0.926339 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.141 x 8.548 at -3.692 degrees (North through East) ! Clean map min=-0.0049352 max=0.24106 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068347Jy sigma=0.926339 ! Fit after self-cal, rms=0.067460Jy sigma=0.911967 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067460Jy sigma=0.911967 ! Fit after self-cal, rms=0.067604Jy sigma=0.910745 ! Inverting map and beam ! Estimated beam: bmin=3.131 mas, bmaj=8.52 mas, bpa=-3.507 degrees ! Estimated noise=1.67087 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000282544 Jy ! Component: 100 - total flux cleaned = 0.000315579 Jy ! Component: 150 - total flux cleaned = 0.000345272 Jy ! Component: 200 - total flux cleaned = 0.000347581 Jy ! Total flux subtracted in 200 components = 0.000347581 Jy ! Clean residual min=-0.005164 max=0.005527 Jy/beam ! Clean residual mean=-0.000028 rms=0.001498 Jy/beam ! Combined flux in latest and established models = 0.277708 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 60 components and 0.277708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067625Jy sigma=0.910212 ! Fit after self-cal, rms=0.067728Jy sigma=0.909905 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067728Jy sigma=0.909905 ! Fit after self-cal, rms=0.067113Jy sigma=0.896217 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067113Jy sigma=0.896217 ! Fit after self-cal, rms=0.067201Jy sigma=0.896136 ! Inverting map and beam ! Estimated beam: bmin=3.139 mas, bmaj=8.532 mas, bpa=-3.399 degrees ! Estimated noise=1.67138 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 3.54105e-05 Jy ! Component: 100 - total flux cleaned = 3.56439e-05 Jy ! Component: 150 - total flux cleaned = 5.95428e-05 Jy ! Component: 200 - total flux cleaned = 0.000102045 Jy ! Total flux subtracted in 200 components = 0.000102045 Jy ! Clean residual min=-0.005179 max=0.005577 Jy/beam ! Clean residual mean=-0.000020 rms=0.001523 Jy/beam ! Combined flux in latest and established models = 0.27781 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 64 components and 0.27781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067227Jy sigma=0.895829 ! Fit after self-cal, rms=0.067262Jy sigma=0.895782 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.751 mas, bmaj=18.99 mas, bpa=0.1465 degrees ! Estimated noise=2.12831 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000471434 Jy ! Component: 100 - total flux cleaned = 0.000418714 Jy ! Component: 150 - total flux cleaned = 0.000421347 Jy ! Component: 200 - total flux cleaned = 0.000423899 Jy ! Total flux subtracted in 200 components = 0.000423899 Jy ! Clean residual min=-0.005155 max=0.006357 Jy/beam ! Clean residual mean=-0.000019 rms=0.001933 Jy/beam ! Combined flux in latest and established models = 0.278234 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 74 components and 0.278234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067366Jy sigma=0.896387 ! Fit after self-cal, rms=0.067359Jy sigma=0.896008 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.569 mas, bmaj=6.718 mas, bpa=-0.7845 degrees ! Estimated noise=2.18426 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.203729 Jy ! Component: 100 - total flux cleaned = 0.247436 Jy ! Component: 150 - total flux cleaned = 0.26386 Jy ! Component: 200 - total flux cleaned = 0.271605 Jy ! Total flux subtracted in 200 components = 0.271605 Jy ! Clean residual min=-0.007590 max=0.006565 Jy/beam ! Clean residual mean=0.000015 rms=0.001926 Jy/beam ! Combined flux in latest and established models = 0.271605 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.271605 Jy ! Inverting map and beam ! Estimated beam: bmin=3.139 mas, bmaj=8.532 mas, bpa=-3.399 degrees ! Estimated noise=1.67138 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00473804 Jy ! Component: 100 - total flux cleaned = 0.00545567 Jy ! Component: 150 - total flux cleaned = 0.00561142 Jy ! Component: 200 - total flux cleaned = 0.00569857 Jy ! Total flux subtracted in 200 components = 0.00569857 Jy ! Clean residual min=-0.005064 max=0.005738 Jy/beam ! Clean residual mean=-0.000020 rms=0.001537 Jy/beam ! Combined flux in latest and established models = 0.277303 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 42 components and 0.277303 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.751 mas, bmaj=18.99 mas, bpa=0.1465 degrees ! Estimated noise=2.12831 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000744671 Jy ! Component: 100 - total flux cleaned = 0.0007485 Jy ! Component: 150 - total flux cleaned = 0.000749321 Jy ! Component: 200 - total flux cleaned = 0.000746196 Jy ! Total flux subtracted in 200 components = 0.000746196 Jy ! Clean residual min=-0.005157 max=0.006404 Jy/beam ! Clean residual mean=-0.000020 rms=0.001935 Jy/beam ! Combined flux in latest and established models = 0.27805 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 54 components and 0.27805 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.139 mas, bmaj=8.532 mas, bpa=-3.399 degrees ! Estimated noise=1.67138 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000435854 Jy ! Component: 100 - total flux cleaned = -0.000369498 Jy ! Component: 150 - total flux cleaned = -0.000297087 Jy ! Component: 200 - total flux cleaned = -0.000267187 Jy ! Total flux subtracted in 200 components = -0.000267187 Jy ! Clean residual min=-0.005072 max=0.005488 Jy/beam ! Clean residual mean=-0.000020 rms=0.001516 Jy/beam ! Combined flux in latest and established models = 0.277782 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 61 components and 0.277782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067307Jy sigma=0.895451 ! Fit after self-cal, rms=0.067319Jy sigma=0.895416 wmodel J0927-2034_S_2004_05_08_yyk\_map.mod ! Writing 61 model components to file: J0927-2034_S_2004_05_08_yyk_map.mod wobs J0927-2034_S_2004_05_08_yyk\_uvs.fits ! Writing UV FITS file: J0927-2034_S_2004_05_08_yyk_uvs.fits wwins J0927-2034_S_2004_05_08_yyk\_map.win ! wwins: Wrote 1 windows to J0927-2034_S_2004_05_08_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000630948 Jy ! Component: 100 - total flux cleaned = 0.000367684 Jy ! Component: 150 - total flux cleaned = -0.000454023 Jy ! Component: 200 - total flux cleaned = -0.00107045 Jy ! Component: 250 - total flux cleaned = -0.00129059 Jy ! Component: 300 - total flux cleaned = -0.00142704 Jy ! Component: 350 - total flux cleaned = -0.00155649 Jy ! Component: 400 - total flux cleaned = -0.001741 Jy ! Component: 450 - total flux cleaned = -0.00191658 Jy ! Component: 500 - total flux cleaned = -0.00197366 Jy ! Component: 550 - total flux cleaned = -0.00208576 Jy ! Component: 600 - total flux cleaned = -0.00235421 Jy ! Component: 650 - total flux cleaned = -0.00256201 Jy ! Component: 700 - total flux cleaned = -0.0025108 Jy ! Component: 750 - total flux cleaned = -0.00246295 Jy ! Component: 800 - total flux cleaned = -0.00251144 Jy ! Component: 850 - total flux cleaned = -0.00255836 Jy ! Component: 900 - total flux cleaned = -0.00260361 Jy ! Component: 950 - total flux cleaned = -0.00246939 Jy ! Component: 1000 - total flux cleaned = -0.00255771 Jy ! Component: 1050 - total flux cleaned = -0.00264135 Jy ! Component: 1100 - total flux cleaned = -0.00284998 Jy ! Component: 1150 - total flux cleaned = -0.00289085 Jy ! Component: 1200 - total flux cleaned = -0.00313443 Jy ! Component: 1250 - total flux cleaned = -0.00329401 Jy ! Component: 1300 - total flux cleaned = -0.00341201 Jy ! Component: 1350 - total flux cleaned = -0.00368109 Jy ! Component: 1400 - total flux cleaned = -0.00379528 Jy ! Component: 1450 - total flux cleaned = -0.00398117 Jy ! Component: 1500 - total flux cleaned = -0.00390815 Jy ! Component: 1550 - total flux cleaned = -0.00398004 Jy ! Component: 1600 - total flux cleaned = -0.00390965 Jy ! Component: 1650 - total flux cleaned = -0.0040149 Jy ! Component: 1700 - total flux cleaned = -0.00401527 Jy ! Component: 1750 - total flux cleaned = -0.00408311 Jy ! Component: 1800 - total flux cleaned = -0.00414935 Jy ! Component: 1850 - total flux cleaned = -0.00414926 Jy ! Component: 1900 - total flux cleaned = -0.00424687 Jy ! Component: 1950 - total flux cleaned = -0.00434248 Jy ! Component: 2000 - total flux cleaned = -0.0042792 Jy ! Total flux subtracted in 2048 components = -0.00449719 Jy ! Clean residual min=-0.001904 max=0.001856 Jy/beam ! Clean residual mean=-0.000026 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.273285 Jy keep ! Adding 131 model components to the UV plane model. ! The established model now contains 192 components and 0.273285 Jy ![Exited script file: muppet] wmap "J0927-2034_S_2004_05_08_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.139 x 8.532 at -3.399 degrees (North through East) ! Clean map min=-0.0038035 max=0.24067 Jy/beam ! Writing clean map to FITS file: J0927-2034_S_2004_05_08_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.240666 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000629123 device "J0927-2034_S_2004_05_08_yyk\_map.eps/VPS" ! Attempting to open device: 'J0927-2034_S_2004_05_08_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.784228 0.784228 1.56846 3.13691 6.27383 12.5477 25.0953 50.1906 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.24 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.139 x 8.532 at -3.399 degrees (North through East) ! Clean map min=-0.0038035 max=0.24067 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0927-2034_S_2004_05_08_yyk\_map.gif/gif" ! Attempting to open device: 'J0927-2034_S_2004_05_08_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0927-2034_S_2004_05_08_yyk_uvs.log closed on Wed Dec 7 00:13:37 2005