! Started logfile: J0922-3959_S_2004_04_30_yyk_uvs.log on Wed Dec 7 00:12:58 2005 obs J0922-3959_S_2004_04_30_yyk_uve.fits ! Reading UV FITS file: J0922-3959_S_2004_04_30_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.622222 visibilities/baseline/integration-bin. ! Found source: J0922-3959 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1631 lines of history. ! ! Reading 448 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0922-3959_S_2004_04_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.985901 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.290196Jy sigma=3.960446 ! Fit after self-cal, rms=0.290192Jy sigma=3.920571 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.443 mas, bmaj=6.936 mas, bpa=-3.979 degrees ! Estimated noise=4.14199 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.807686 Jy ! Component: 100 - total flux cleaned = 1.01805 Jy ! Total flux subtracted in 100 components = 1.01805 Jy ! Clean residual min=-0.040760 max=0.073539 Jy/beam ! Clean residual mean=0.000511 rms=0.018664 Jy/beam ! Combined flux in latest and established models = 1.01805 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 1.01805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199432Jy sigma=2.952306 ! Fit after self-cal, rms=0.199577Jy sigma=2.950215 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.013 mas, bmaj=8.695 mas, bpa=-3.573 degrees ! Estimated noise=2.7126 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.144501 Jy ! Component: 100 - total flux cleaned = 0.191966 Jy ! Component: 150 - total flux cleaned = 0.208646 Jy ! Component: 200 - total flux cleaned = 0.213444 Jy ! Total flux subtracted in 200 components = 0.213444 Jy ! Clean residual min=-0.038117 max=0.045236 Jy/beam ! Clean residual mean=0.000111 rms=0.013450 Jy/beam ! Combined flux in latest and established models = 1.2315 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 59 components and 1.2315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171313Jy sigma=1.952271 ! Fit after self-cal, rms=0.171266Jy sigma=1.952166 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.171266Jy sigma=1.952166 ! Fit after self-cal, rms=0.171266Jy sigma=1.952166 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171266Jy sigma=1.952166 ! Fit after self-cal, rms=0.171265Jy sigma=1.952165 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.013 mas, bmaj=8.695 mas, bpa=-3.573 degrees ! Estimated noise=2.7126 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000361359 Jy ! Component: 100 - total flux cleaned = 0.000692891 Jy ! Component: 150 - total flux cleaned = 0.000859257 Jy ! Component: 200 - total flux cleaned = 0.0010213 Jy ! Total flux subtracted in 200 components = 0.0010213 Jy ! Clean residual min=-0.037865 max=0.045357 Jy/beam ! Clean residual mean=0.000114 rms=0.013381 Jy/beam ! Combined flux in latest and established models = 1.23252 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 63 components and 1.23252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171020Jy sigma=1.948735 ! Fit after self-cal, rms=0.170971Jy sigma=1.948682 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170971Jy sigma=1.948682 ! Fit after self-cal, rms=0.166129Jy sigma=1.869858 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000918368 Jy ! Component: 100 - total flux cleaned = 0.00106315 Jy ! Component: 150 - total flux cleaned = 0.00121772 Jy ! Component: 200 - total flux cleaned = 0.00122152 Jy ! Total flux subtracted in 200 components = 0.00122152 Jy ! Clean residual min=-0.036407 max=0.044154 Jy/beam ! Clean residual mean=0.000108 rms=0.013172 Jy/beam ! Combined flux in latest and established models = 1.23374 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 69 components and 1.23374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165913Jy sigma=1.866808 ! Fit after self-cal, rms=0.165980Jy sigma=1.860825 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.013 x 8.695 at -3.573 degrees (North through East) ! Clean map min=-0.035259 max=0.94897 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165980Jy sigma=1.860825 ! Fit after self-cal, rms=0.158235Jy sigma=1.650823 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158235Jy sigma=1.650823 ! Fit after self-cal, rms=0.158686Jy sigma=1.649161 ! Inverting map and beam ! Estimated beam: bmin=3.049 mas, bmaj=8.81 mas, bpa=-3.387 degrees ! Estimated noise=2.7068 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0100775 Jy ! Component: 100 - total flux cleaned = -0.0100854 Jy ! Component: 150 - total flux cleaned = -0.0100758 Jy ! Component: 200 - total flux cleaned = -0.00994617 Jy ! Total flux subtracted in 200 components = -0.00994617 Jy ! Clean residual min=-0.023650 max=0.029850 Jy/beam ! Clean residual mean=0.000595 rms=0.007937 Jy/beam ! Combined flux in latest and established models = 1.22379 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 73 components and 1.22379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157450Jy sigma=1.639584 ! Fit after self-cal, rms=0.157885Jy sigma=1.638948 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157885Jy sigma=1.638948 ! Fit after self-cal, rms=0.158650Jy sigma=1.663295 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158650Jy sigma=1.663295 ! Fit after self-cal, rms=0.158995Jy sigma=1.663047 ! Inverting map and beam ! Estimated beam: bmin=3.049 mas, bmaj=8.812 mas, bpa=-3.486 degrees ! Estimated noise=2.72032 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00525908 Jy ! Component: 100 - total flux cleaned = 0.00527601 Jy ! Component: 150 - total flux cleaned = 0.00529453 Jy ! Component: 200 - total flux cleaned = 0.005423 Jy ! Total flux subtracted in 200 components = 0.005423 Jy ! Clean residual min=-0.027681 max=0.034390 Jy/beam ! Clean residual mean=0.000712 rms=0.009218 Jy/beam ! Combined flux in latest and established models = 1.22922 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 74 components and 1.22922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159055Jy sigma=1.659159 ! Fit after self-cal, rms=0.159298Jy sigma=1.659048 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.213 mas, bmaj=35.71 mas, bpa=1.564 degrees ! Estimated noise=3.42566 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00619525 Jy ! Component: 100 - total flux cleaned = 0.00646121 Jy ! Component: 150 - total flux cleaned = 0.00648663 Jy ! Component: 200 - total flux cleaned = 0.00673197 Jy ! Total flux subtracted in 200 components = 0.00673197 Jy ! Clean residual min=-0.031973 max=0.040418 Jy/beam ! Clean residual mean=0.001343 rms=0.012534 Jy/beam ! Combined flux in latest and established models = 1.23595 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 76 components and 1.23595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159774Jy sigma=1.661330 ! Fit after self-cal, rms=0.159872Jy sigma=1.661014 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.452 mas, bmaj=6.944 mas, bpa=-3.797 degrees ! Estimated noise=4.21695 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.822852 Jy ! Component: 100 - total flux cleaned = 1.0326 Jy ! Component: 150 - total flux cleaned = 1.12734 Jy ! Component: 200 - total flux cleaned = 1.17274 Jy ! Total flux subtracted in 200 components = 1.17274 Jy ! Clean residual min=-0.030994 max=0.043092 Jy/beam ! Clean residual mean=0.000310 rms=0.010149 Jy/beam ! Combined flux in latest and established models = 1.17274 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 54 model components to the UV plane model. ! The established model now contains 54 components and 1.17274 Jy ! Inverting map and beam ! Estimated beam: bmin=3.049 mas, bmaj=8.812 mas, bpa=-3.486 degrees ! Estimated noise=2.72032 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0388217 Jy ! Component: 100 - total flux cleaned = 0.0516457 Jy ! Component: 150 - total flux cleaned = 0.0545281 Jy ! Component: 200 - total flux cleaned = 0.0548577 Jy ! Total flux subtracted in 200 components = 0.0548577 Jy ! Clean residual min=-0.027201 max=0.034828 Jy/beam ! Clean residual mean=0.000706 rms=0.009434 Jy/beam ! Combined flux in latest and established models = 1.2276 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 60 components and 1.2276 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.213 mas, bmaj=35.71 mas, bpa=1.564 degrees ! Estimated noise=3.42566 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0069958 Jy ! Component: 100 - total flux cleaned = 0.00701551 Jy ! Component: 150 - total flux cleaned = 0.0072858 Jy ! Component: 200 - total flux cleaned = 0.00754517 Jy ! Total flux subtracted in 200 components = 0.00754517 Jy ! Clean residual min=-0.032644 max=0.040901 Jy/beam ! Clean residual mean=0.001340 rms=0.012773 Jy/beam ! Combined flux in latest and established models = 1.23514 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 63 components and 1.23514 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.049 mas, bmaj=8.812 mas, bpa=-3.486 degrees ! Estimated noise=2.72032 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00611303 Jy ! Component: 100 - total flux cleaned = -0.00586814 Jy ! Component: 150 - total flux cleaned = -0.00567987 Jy ! Component: 200 - total flux cleaned = -0.00554534 Jy ! Total flux subtracted in 200 components = -0.00554534 Jy ! Clean residual min=-0.027481 max=0.034645 Jy/beam ! Clean residual mean=0.000712 rms=0.009317 Jy/beam ! Combined flux in latest and established models = 1.2296 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 68 components and 1.2296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159122Jy sigma=1.658189 ! Fit after self-cal, rms=0.159286Jy sigma=1.658026 wmodel J0922-3959_S_2004_04_30_yyk\_map.mod ! Writing 68 model components to file: J0922-3959_S_2004_04_30_yyk_map.mod wobs J0922-3959_S_2004_04_30_yyk\_uvs.fits ! Writing UV FITS file: J0922-3959_S_2004_04_30_yyk_uvs.fits wwins J0922-3959_S_2004_04_30_yyk\_map.win ! wwins: Wrote 1 windows to J0922-3959_S_2004_04_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147125 Jy ! Component: 100 - total flux cleaned = 0.0212448 Jy ! Component: 150 - total flux cleaned = 0.0252141 Jy ! Component: 200 - total flux cleaned = 0.0284143 Jy ! Component: 250 - total flux cleaned = 0.0299029 Jy ! Component: 300 - total flux cleaned = 0.0316292 Jy ! Component: 350 - total flux cleaned = 0.0329178 Jy ! Component: 400 - total flux cleaned = 0.034133 Jy ! Component: 450 - total flux cleaned = 0.0352869 Jy ! Component: 500 - total flux cleaned = 0.0366764 Jy ! Component: 550 - total flux cleaned = 0.0380045 Jy ! Component: 600 - total flux cleaned = 0.0387769 Jy ! Component: 650 - total flux cleaned = 0.039788 Jy ! Component: 700 - total flux cleaned = 0.041042 Jy ! Component: 750 - total flux cleaned = 0.0422937 Jy ! Component: 800 - total flux cleaned = 0.0432962 Jy ! Component: 850 - total flux cleaned = 0.0443084 Jy ! Component: 900 - total flux cleaned = 0.0453276 Jy ! Component: 950 - total flux cleaned = 0.0463585 Jy ! Component: 1000 - total flux cleaned = 0.0476592 Jy ! Component: 1050 - total flux cleaned = 0.0487126 Jy ! Component: 1100 - total flux cleaned = 0.0497794 Jy ! Component: 1150 - total flux cleaned = 0.0511258 Jy ! Component: 1200 - total flux cleaned = 0.051943 Jy ! Component: 1250 - total flux cleaned = 0.0530484 Jy ! Component: 1300 - total flux cleaned = 0.0544562 Jy ! Component: 1350 - total flux cleaned = 0.0553203 Jy ! Component: 1400 - total flux cleaned = 0.0561977 Jy ! Component: 1450 - total flux cleaned = 0.0570923 Jy ! Component: 1500 - total flux cleaned = 0.0577023 Jy ! Component: 1550 - total flux cleaned = 0.0583257 Jy ! Component: 1600 - total flux cleaned = 0.059282 Jy ! Component: 1650 - total flux cleaned = 0.0599344 Jy ! Component: 1700 - total flux cleaned = 0.0606022 Jy ! Component: 1750 - total flux cleaned = 0.0612845 Jy ! Component: 1800 - total flux cleaned = 0.0619812 Jy ! Component: 1850 - total flux cleaned = 0.0627002 Jy ! Component: 1900 - total flux cleaned = 0.0627022 Jy ! Component: 1950 - total flux cleaned = 0.0634516 Jy ! Component: 2000 - total flux cleaned = 0.0638359 Jy ! Total flux subtracted in 2048 components = 0.0642294 Jy ! Clean residual min=-0.023441 max=0.024468 Jy/beam ! Clean residual mean=0.000447 rms=0.006847 Jy/beam ! Combined flux in latest and established models = 1.29383 Jy keep ! Adding 90 model components to the UV plane model. ! The established model now contains 158 components and 1.29383 Jy ![Exited script file: muppet] wmap "J0922-3959_S_2004_04_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.049 x 8.812 at -3.486 degrees (North through East) ! Clean map min=-0.034306 max=0.94269 Jy/beam ! Writing clean map to FITS file: J0922-3959_S_2004_04_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.942687 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00806991 device "J0922-3959_S_2004_04_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J0922-3959_S_2004_04_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.56816 2.56816 5.13633 10.2727 20.5453 41.0906 82.1812 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0242 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.942 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.049 x 8.812 at -3.486 degrees (North through East) ! Clean map min=-0.034306 max=0.94269 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0922-3959_S_2004_04_30_yyk\_map.gif/gif" ! Attempting to open device: 'J0922-3959_S_2004_04_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0922-3959_S_2004_04_30_yyk_uvs.log closed on Wed Dec 7 00:13:02 2005