! Started logfile: J0910-0526_X_2004_05_27_yyk_uvs.log on Wed Dec  7 01:08:48 2005
obs J0910-0526_X_2004_05_27_yyk_uve.fits
! Reading UV FITS file: J0910-0526_X_2004_05_27_yyk_uve.fits
! AN table 1: 16 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.184722 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0910-0526
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1380 lines of history.
! 
! Reading 532 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0910-0526_X_2004_05_27_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 128x128 pixels with 0.800x0.800 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.10361 Jy 
startmod ,phase_soltime
! Applying default point source starting model.
! Performing phase self-cal over 10 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 110 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 102 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 126 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 113 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.947018Jy  sigma=14.682449
! Fit after  self-cal, rms=0.941692Jy  sigma=14.643214
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.17 mas, bmaj=4.204 mas, bpa=24.85 degrees
! Estimated noise=4.09902 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0553531 Jy
! Component: 100  -  total flux cleaned = 0.0697558 Jy
! Total flux subtracted in 100 components = 0.0697558 Jy
! Clean residual min=-0.012009 max=0.010524 Jy/beam
! Clean residual mean=-0.000011 rms=0.003397 Jy/beam
! Combined flux in latest and established models = 0.0697558 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.0697558 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082075Jy  sigma=1.050173
! Fit after  self-cal, rms=0.082008Jy  sigma=1.049765
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.72 mas, bmaj=5.499 mas, bpa=48.36 degrees
! Estimated noise=2.38408 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00996314 Jy
! Component: 100  -  total flux cleaned = 0.0126976 Jy
! Component: 150  -  total flux cleaned = 0.0137086 Jy
! Component: 200  -  total flux cleaned = 0.0144648 Jy
! Total flux subtracted in 200 components = 0.0144648 Jy
! Clean residual min=-0.006603 max=0.008281 Jy/beam
! Clean residual mean=-0.000056 rms=0.002216 Jy/beam
! Combined flux in latest and established models = 0.0842206 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 8 model components to the UV plane model.
! The established model now contains 18 components and 0.0842206 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081430Jy  sigma=1.033223
! Fit after  self-cal, rms=0.081408Jy  sigma=1.032805
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
selflims ampcor_selflim
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.996365
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.92     HN        1.00*    KP        1.05     
!   LA        0.97     MK        1.00*    NL        1.00*    OV        0.97     
!   PT        1.04     SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.081408Jy  sigma=1.032805
! Fit after  self-cal, rms=0.081459Jy  sigma=1.032152
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081459Jy  sigma=1.032152
! Fit after  self-cal, rms=0.081446Jy  sigma=1.032140
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.73 mas, bmaj=5.516 mas, bpa=46.95 degrees
! Estimated noise=2.37814 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -3.23127e-06 Jy
! Component: 100  -  total flux cleaned = -7.81788e-05 Jy
! Component: 150  -  total flux cleaned = -7.4732e-05 Jy
! Component: 200  -  total flux cleaned = -1.24722e-05 Jy
! Total flux subtracted in 200 components = -1.24722e-05 Jy
! Clean residual min=-0.007168 max=0.008238 Jy/beam
! Clean residual mean=-0.000058 rms=0.002140 Jy/beam
! Combined flux in latest and established models = 0.0842081 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 9 model components to the UV plane model.
! The established model now contains 20 components and 0.0842081 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081287Jy  sigma=1.030618
! Fit after  self-cal, rms=0.081304Jy  sigma=1.030566
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081304Jy  sigma=1.030566
! Fit after  self-cal, rms=0.073800Jy  sigma=0.900094
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00649929 Jy
! Component: 100  -  total flux cleaned = 0.00637821 Jy
! Component: 150  -  total flux cleaned = 0.00618091 Jy
! Component: 200  -  total flux cleaned = 0.00602478 Jy
! Total flux subtracted in 200 components = 0.00602478 Jy
! Clean residual min=-0.006349 max=0.006016 Jy/beam
! Clean residual mean=-0.000022 rms=0.001764 Jy/beam
! Combined flux in latest and established models = 0.0902329 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 25 components and 0.0902329 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073447Jy  sigma=0.890037
! Fit after  self-cal, rms=0.071127Jy  sigma=0.871103
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.73 x 5.516 at 46.95 degrees (North through East)
! Clean map  min=-0.0054346  max=0.076244 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.006 mas, bmaj=5.752 mas, bpa=45.07 degrees
! Estimated noise=2.39512 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000203746 Jy
! Component: 100  -  total flux cleaned = -0.000348507 Jy
! Component: 150  -  total flux cleaned = -0.00050378 Jy
! Component: 200  -  total flux cleaned = -0.000637961 Jy
! Total flux subtracted in 200 components = -0.000637961 Jy
! Clean residual min=-0.005991 max=0.005581 Jy/beam
! Clean residual mean=-0.000011 rms=0.001607 Jy/beam
! Combined flux in latest and established models = 0.0895949 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 8 model components to the UV plane model.
! The established model now contains 26 components and 0.0895949 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071096Jy  sigma=0.869246
! Fit after  self-cal, rms=0.070399Jy  sigma=0.865550
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.158 mas, bmaj=4.223 mas, bpa=24.17 degrees
! Estimated noise=4.10016 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0628732 Jy
! Component: 100  -  total flux cleaned = 0.078913 Jy
! Component: 150  -  total flux cleaned = 0.0852757 Jy
! Component: 200  -  total flux cleaned = 0.0875307 Jy
! Total flux subtracted in 200 components = 0.0875307 Jy
! Clean residual min=-0.008791 max=0.008855 Jy/beam
! Clean residual mean=0.000005 rms=0.003054 Jy/beam
! Combined flux in latest and established models = 0.0875307 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0875307 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.73 mas, bmaj=5.516 mas, bpa=46.95 degrees
! Estimated noise=2.37814 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00312936 Jy
! Component: 100  -  total flux cleaned = 0.00325246 Jy
! Component: 150  -  total flux cleaned = 0.00297723 Jy
! Component: 200  -  total flux cleaned = 0.0027425 Jy
! Total flux subtracted in 200 components = 0.0027425 Jy
! Clean residual min=-0.006069 max=0.005602 Jy/beam
! Clean residual mean=-0.000011 rms=0.001696 Jy/beam
! Combined flux in latest and established models = 0.0902732 Jy
! Adding 7 model components to the UV plane model.
! The established model now contains 15 components and 0.0902732 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.006 mas, bmaj=5.752 mas, bpa=45.07 degrees
! Estimated noise=2.39512 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000212963 Jy
! Component: 100  -  total flux cleaned = -0.000379505 Jy
! Component: 150  -  total flux cleaned = -0.000475793 Jy
! Component: 200  -  total flux cleaned = -0.000564032 Jy
! Total flux subtracted in 200 components = -0.000564032 Jy
! Clean residual min=-0.005982 max=0.005474 Jy/beam
! Clean residual mean=-0.000009 rms=0.001582 Jy/beam
! Combined flux in latest and established models = 0.0897092 Jy
! Adding 9 model components to the UV plane model.
! The established model now contains 17 components and 0.0897092 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.73 mas, bmaj=5.516 mas, bpa=46.95 degrees
! Estimated noise=2.37814 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 5.13969e-05 Jy
! Component: 100  -  total flux cleaned = 5.19805e-05 Jy
! Component: 150  -  total flux cleaned = 1.36972e-05 Jy
! Component: 200  -  total flux cleaned = -2.09492e-05 Jy
! Total flux subtracted in 200 components = -2.09492e-05 Jy
! Clean residual min=-0.005999 max=0.005579 Jy/beam
! Clean residual mean=-0.000010 rms=0.001625 Jy/beam
! Combined flux in latest and established models = 0.0896882 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 21 components and 0.0896882 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070435Jy  sigma=0.865071
! Fit after  self-cal, rms=0.070155Jy  sigma=0.863679
wmodel J0910-0526_X_2004_05_27_yyk\_map.mod
! Writing 21 model components to file: J0910-0526_X_2004_05_27_yyk_map.mod
wobs J0910-0526_X_2004_05_27_yyk\_uvs.fits
! Writing UV FITS file: J0910-0526_X_2004_05_27_yyk_uvs.fits
wwins J0910-0526_X_2004_05_27_yyk\_map.win
! wwins: Wrote 1 windows to J0910-0526_X_2004_05_27_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=512  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000658828 Jy
! Component: 100  -  total flux cleaned = -0.000895171 Jy
! Component: 150  -  total flux cleaned = -0.000822553 Jy
! Component: 200  -  total flux cleaned = -0.000101035 Jy
! Component: 250  -  total flux cleaned = 0.000398237 Jy
! Component: 300  -  total flux cleaned = 0.000812134 Jy
! Component: 350  -  total flux cleaned = 0.000815197 Jy
! Component: 400  -  total flux cleaned = 0.00097622 Jy
! Component: 450  -  total flux cleaned = 0.00107791 Jy
! Component: 500  -  total flux cleaned = 0.000977398 Jy
! Total flux subtracted in 512 components = 0.000928472 Jy
! Clean residual min=-0.003399 max=0.003411 Jy/beam
! Clean residual mean=-0.000004 rms=0.001055 Jy/beam
! Combined flux in latest and established models = 0.0906167 Jy
keep
! Adding 28 model components to the UV plane model.
! The established model now contains 49 components and 0.0906167 Jy
![Exited script file: muppet]
wmap "J0910-0526_X_2004_05_27_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.73 x 5.516 at 46.95 degrees (North through East)
! Clean map  min=-0.0045079  max=0.076621 Jy/beam
! Writing clean map to FITS file: J0910-0526_X_2004_05_27_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0766208 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00105756 
device "J0910-0526_X_2004_05_27_yyk\_map.eps/VPS"
! Attempting to open device: 'J0910-0526_X_2004_05_27_yyk_map.eps/VPS'
loglevs 1*100*3*image_rms/peak_flux
! The new contour levels are:
!  -4.14076 4.14076 8.28152 16.563 33.1261 66.2521
print "clev=",int(1*3*image_rms*10000)/10000
! clev= 0.0031 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.076 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.73 x 5.516 at 46.95 degrees (North through East)
! Clean map  min=-0.0045079  max=0.076621 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0910-0526_X_2004_05_27_yyk\_map.gif/gif"
! Attempting to open device: 'J0910-0526_X_2004_05_27_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0910-0526_X_2004_05_27_yyk_uvs.log closed on Wed Dec  7 01:08:48 2005