! Started logfile: J0841-3136_S_2004_05_27_yyk_uvs.log on Wed Dec 7 00:11:28 2005 obs J0841-3136_S_2004_05_27_yyk_uve.fits ! Reading UV FITS file: J0841-3136_S_2004_05_27_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.9 visibilities/baseline/integration-bin. ! Found source: J0841-3136 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1383 lines of history. ! ! Reading 648 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0841-3136_S_2004_05_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.24088 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.798073Jy sigma=10.540135 ! Fit after self-cal, rms=0.797159Jy sigma=10.527588 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.913 mas, bmaj=6.705 mas, bpa=-0.5364 degrees ! Estimated noise=3.5774 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.182616 Jy ! Component: 100 - total flux cleaned = 0.232362 Jy ! Total flux subtracted in 100 components = 0.232362 Jy ! Clean residual min=-0.017450 max=0.015241 Jy/beam ! Clean residual mean=-0.000357 rms=0.004456 Jy/beam ! Combined flux in latest and established models = 0.232362 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.232362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099355Jy sigma=1.135705 ! Fit after self-cal, rms=0.099341Jy sigma=1.134173 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.44 mas, bmaj=8.182 mas, bpa=-1.801 degrees ! Estimated noise=2.38165 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.022774 Jy ! Component: 100 - total flux cleaned = 0.0307218 Jy ! Component: 150 - total flux cleaned = 0.0337864 Jy ! Component: 200 - total flux cleaned = 0.0342958 Jy ! Total flux subtracted in 200 components = 0.0342958 Jy ! Clean residual min=-0.009838 max=0.008183 Jy/beam ! Clean residual mean=-0.000334 rms=0.002537 Jy/beam ! Combined flux in latest and established models = 0.266657 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 45 components and 0.266657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095783Jy sigma=1.082154 ! Fit after self-cal, rms=0.095759Jy sigma=1.082116 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00249 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.84 HN 1.00* KP 1.05 ! LA 1.01 MK 1.00 NL 1.11 OV 0.98 ! PT 1.06 SC 0.90 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.03573 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 0.91 ! LA 1.00* MK 0.86 NL 0.99 OV 0.86 ! PT 0.86 SC 1.15 ! ! ! Fit before self-cal, rms=0.095759Jy sigma=1.082116 ! Fit after self-cal, rms=0.093793Jy sigma=1.053189 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093793Jy sigma=1.053189 ! Fit after self-cal, rms=0.093808Jy sigma=1.053130 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.415 mas, bmaj=8.151 mas, bpa=-2.401 degrees ! Estimated noise=2.35397 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00135629 Jy ! Component: 100 - total flux cleaned = -0.00131871 Jy ! Component: 150 - total flux cleaned = -0.00131627 Jy ! Component: 200 - total flux cleaned = -0.00128913 Jy ! Total flux subtracted in 200 components = -0.00128913 Jy ! Clean residual min=-0.009317 max=0.007574 Jy/beam ! Clean residual mean=-0.000292 rms=0.002273 Jy/beam ! Combined flux in latest and established models = 0.265368 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 58 components and 0.265368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093785Jy sigma=1.052636 ! Fit after self-cal, rms=0.093762Jy sigma=1.052615 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093762Jy sigma=1.052615 ! Fit after self-cal, rms=0.090011Jy sigma=1.006317 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000934043 Jy ! Component: 100 - total flux cleaned = 0.000970063 Jy ! Component: 150 - total flux cleaned = 0.00103609 Jy ! Component: 200 - total flux cleaned = 0.00109602 Jy ! Total flux subtracted in 200 components = 0.00109602 Jy ! Clean residual min=-0.008799 max=0.007371 Jy/beam ! Clean residual mean=-0.000299 rms=0.002240 Jy/beam ! Combined flux in latest and established models = 0.266464 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 68 components and 0.266464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089986Jy sigma=1.005929 ! Fit after self-cal, rms=0.089743Jy sigma=1.002125 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.415 x 8.151 at -2.401 degrees (North through East) ! Clean map min=-0.0083263 max=0.19749 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089743Jy sigma=1.002125 ! Fit after self-cal, rms=0.087790Jy sigma=0.997050 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087790Jy sigma=0.997050 ! Fit after self-cal, rms=0.087797Jy sigma=0.996671 ! Inverting map and beam ! Estimated beam: bmin=3.38 mas, bmaj=8.092 mas, bpa=-2.885 degrees ! Estimated noise=2.30924 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00292499 Jy ! Component: 100 - total flux cleaned = -0.00316699 Jy ! Component: 150 - total flux cleaned = -0.00316883 Jy ! Component: 200 - total flux cleaned = -0.00317226 Jy ! Total flux subtracted in 200 components = -0.00317226 Jy ! Clean residual min=-0.008270 max=0.007344 Jy/beam ! Clean residual mean=-0.000265 rms=0.002135 Jy/beam ! Combined flux in latest and established models = 0.263292 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 70 components and 0.263292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087733Jy sigma=0.995446 ! Fit after self-cal, rms=0.087740Jy sigma=0.995393 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087740Jy sigma=0.995393 ! Fit after self-cal, rms=0.085593Jy sigma=0.985670 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085593Jy sigma=0.985670 ! Fit after self-cal, rms=0.085594Jy sigma=0.985623 ! Inverting map and beam ! Estimated beam: bmin=3.313 mas, bmaj=7.958 mas, bpa=-4.091 degrees ! Estimated noise=2.28573 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102429 Jy ! Component: 100 - total flux cleaned = 0.00112135 Jy ! Component: 150 - total flux cleaned = 0.00115652 Jy ! Component: 200 - total flux cleaned = 0.0011872 Jy ! Total flux subtracted in 200 components = 0.0011872 Jy ! Clean residual min=-0.008205 max=0.007121 Jy/beam ! Clean residual mean=-0.000288 rms=0.002144 Jy/beam ! Combined flux in latest and established models = 0.264479 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 75 components and 0.264479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085490Jy sigma=0.984919 ! Fit after self-cal, rms=0.085490Jy sigma=0.984904 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.119 mas, bmaj=25.9 mas, bpa=2.743 degrees ! Estimated noise=2.91058 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000799412 Jy ! Component: 100 - total flux cleaned = 0.000858597 Jy ! Component: 150 - total flux cleaned = 0.000886753 Jy ! Component: 200 - total flux cleaned = 0.000915442 Jy ! Total flux subtracted in 200 components = 0.000915442 Jy ! Clean residual min=-0.008941 max=0.008657 Jy/beam ! Clean residual mean=-0.000539 rms=0.002949 Jy/beam ! Combined flux in latest and established models = 0.265395 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 76 components and 0.265395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085472Jy sigma=0.984830 ! Fit after self-cal, rms=0.085461Jy sigma=0.984750 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.867 mas, bmaj=6.601 mas, bpa=-1.884 degrees ! Estimated noise=3.42658 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.178813 Jy ! Component: 100 - total flux cleaned = 0.229385 Jy ! Component: 150 - total flux cleaned = 0.251069 Jy ! Component: 200 - total flux cleaned = 0.261237 Jy ! Total flux subtracted in 200 components = 0.261237 Jy ! Clean residual min=-0.012449 max=0.010238 Jy/beam ! Clean residual mean=-0.000207 rms=0.003115 Jy/beam ! Combined flux in latest and established models = 0.261237 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.261237 Jy ! Inverting map and beam ! Estimated beam: bmin=3.313 mas, bmaj=7.958 mas, bpa=-4.091 degrees ! Estimated noise=2.28573 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021592 Jy ! Component: 100 - total flux cleaned = 0.00233218 Jy ! Component: 150 - total flux cleaned = 0.00239698 Jy ! Component: 200 - total flux cleaned = 0.00245033 Jy ! Total flux subtracted in 200 components = 0.00245033 Jy ! Clean residual min=-0.008320 max=0.007066 Jy/beam ! Clean residual mean=-0.000286 rms=0.002180 Jy/beam ! Combined flux in latest and established models = 0.263687 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 54 components and 0.263687 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.119 mas, bmaj=25.9 mas, bpa=2.743 degrees ! Estimated noise=2.91058 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000700696 Jy ! Component: 100 - total flux cleaned = 0.000781135 Jy ! Component: 150 - total flux cleaned = 0.000820284 Jy ! Component: 200 - total flux cleaned = 0.00089495 Jy ! Total flux subtracted in 200 components = 0.00089495 Jy ! Clean residual min=-0.009042 max=0.008821 Jy/beam ! Clean residual mean=-0.000537 rms=0.002993 Jy/beam ! Combined flux in latest and established models = 0.264582 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 59 components and 0.264582 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.313 mas, bmaj=7.958 mas, bpa=-4.091 degrees ! Estimated noise=2.28573 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000500228 Jy ! Component: 100 - total flux cleaned = -0.000460191 Jy ! Component: 150 - total flux cleaned = -0.000463711 Jy ! Component: 200 - total flux cleaned = -0.000464822 Jy ! Total flux subtracted in 200 components = -0.000464822 Jy ! Clean residual min=-0.008233 max=0.007085 Jy/beam ! Clean residual mean=-0.000287 rms=0.002160 Jy/beam ! Combined flux in latest and established models = 0.264118 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 66 components and 0.264118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085490Jy sigma=0.985570 ! Fit after self-cal, rms=0.085493Jy sigma=0.985546 wmodel J0841-3136_S_2004_05_27_yyk\_map.mod ! Writing 66 model components to file: J0841-3136_S_2004_05_27_yyk_map.mod wobs J0841-3136_S_2004_05_27_yyk\_uvs.fits ! Writing UV FITS file: J0841-3136_S_2004_05_27_yyk_uvs.fits wwins J0841-3136_S_2004_05_27_yyk\_map.win ! wwins: Wrote 1 windows to J0841-3136_S_2004_05_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00279074 Jy ! Component: 100 - total flux cleaned = -0.00279562 Jy ! Component: 150 - total flux cleaned = -0.00290679 Jy ! Component: 200 - total flux cleaned = -0.00311413 Jy ! Component: 250 - total flux cleaned = -0.00291841 Jy ! Component: 300 - total flux cleaned = -0.00319132 Jy ! Component: 350 - total flux cleaned = -0.00327748 Jy ! Component: 400 - total flux cleaned = -0.00344943 Jy ! Component: 450 - total flux cleaned = -0.00353342 Jy ! Component: 500 - total flux cleaned = -0.00338258 Jy ! Component: 550 - total flux cleaned = -0.00330989 Jy ! Component: 600 - total flux cleaned = -0.00316519 Jy ! Component: 650 - total flux cleaned = -0.00302461 Jy ! Component: 700 - total flux cleaned = -0.0031588 Jy ! Component: 750 - total flux cleaned = -0.00309474 Jy ! Component: 800 - total flux cleaned = -0.0033531 Jy ! Component: 850 - total flux cleaned = -0.00354054 Jy ! Component: 900 - total flux cleaned = -0.00378299 Jy ! Component: 950 - total flux cleaned = -0.00384291 Jy ! Component: 1000 - total flux cleaned = -0.00384476 Jy ! Component: 1050 - total flux cleaned = -0.00395898 Jy ! Component: 1100 - total flux cleaned = -0.00406807 Jy ! Component: 1150 - total flux cleaned = -0.00406748 Jy ! Component: 1200 - total flux cleaned = -0.00380562 Jy ! Component: 1250 - total flux cleaned = -0.00365159 Jy ! Component: 1300 - total flux cleaned = -0.00339958 Jy ! Component: 1350 - total flux cleaned = -0.00315237 Jy ! Component: 1400 - total flux cleaned = -0.00291032 Jy ! Component: 1450 - total flux cleaned = -0.00281524 Jy ! Component: 1500 - total flux cleaned = -0.0025795 Jy ! Component: 1550 - total flux cleaned = -0.00244041 Jy ! Component: 1600 - total flux cleaned = -0.00221258 Jy ! Component: 1650 - total flux cleaned = -0.00198854 Jy ! Component: 1700 - total flux cleaned = -0.00172511 Jy ! Component: 1750 - total flux cleaned = -0.00155265 Jy ! Component: 1800 - total flux cleaned = -0.00142537 Jy ! Component: 1850 - total flux cleaned = -0.0011738 Jy ! Component: 1900 - total flux cleaned = -0.000883536 Jy ! Component: 1950 - total flux cleaned = -0.00067847 Jy ! Component: 2000 - total flux cleaned = -0.000395768 Jy ! Total flux subtracted in 2048 components = -7.63964e-05 Jy ! Clean residual min=-0.002240 max=0.002345 Jy/beam ! Clean residual mean=-0.000085 rms=0.000772 Jy/beam ! Combined flux in latest and established models = 0.264041 Jy keep ! Adding 117 model components to the UV plane model. ! The established model now contains 183 components and 0.264041 Jy ![Exited script file: muppet] wmap "J0841-3136_S_2004_05_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.313 x 7.958 at -4.091 degrees (North through East) ! Clean map min=-0.0059098 max=0.19146 Jy/beam ! Writing clean map to FITS file: J0841-3136_S_2004_05_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.191459 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000739565 device "J0841-3136_S_2004_05_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J0841-3136_S_2004_05_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.15883 1.15883 2.31767 4.63534 9.27067 18.5413 37.0827 74.1654 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.191 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.313 x 7.958 at -4.091 degrees (North through East) ! Clean map min=-0.0059098 max=0.19146 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0841-3136_S_2004_05_27_yyk\_map.gif/gif" ! Attempting to open device: 'J0841-3136_S_2004_05_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0841-3136_S_2004_05_27_yyk_uvs.log closed on Wed Dec 7 00:11:32 2005