! Started logfile: J0825-3218_S_2004_05_27_yyk_uvs.log on Wed Dec 7 00:10:57 2005 obs J0825-3218_S_2004_05_27_yyk_uve.fits ! Reading UV FITS file: J0825-3218_S_2004_05_27_yyk_uve.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0825-3218 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1383 lines of history. ! ! Reading 720 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0825-3218_S_2004_05_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.257279 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.823509Jy sigma=10.006814 ! Fit after self-cal, rms=0.819020Jy sigma=9.996887 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.623 mas, bmaj=6.973 mas, bpa=-3.027 degrees ! Estimated noise=2.94476 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.183124 Jy ! Component: 100 - total flux cleaned = 0.240582 Jy ! Total flux subtracted in 100 components = 0.240582 Jy ! Clean residual min=-0.014686 max=0.022478 Jy/beam ! Clean residual mean=-0.000534 rms=0.004857 Jy/beam ! Combined flux in latest and established models = 0.240582 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.240582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150260Jy sigma=1.259756 ! Fit after self-cal, rms=0.149906Jy sigma=1.259116 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.18 mas, bmaj=8.459 mas, bpa=-1.51 degrees ! Estimated noise=2.12733 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0353408 Jy ! Component: 100 - total flux cleaned = 0.0489161 Jy ! Component: 150 - total flux cleaned = 0.054282 Jy ! Component: 200 - total flux cleaned = 0.0548905 Jy ! Total flux subtracted in 200 components = 0.0548905 Jy ! Clean residual min=-0.010267 max=0.009276 Jy/beam ! Clean residual mean=-0.000362 rms=0.002886 Jy/beam ! Combined flux in latest and established models = 0.295473 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 47 components and 0.295473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147216Jy sigma=1.152788 ! Fit after self-cal, rms=0.147201Jy sigma=1.152714 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.147201Jy sigma=1.152714 ! Fit after self-cal, rms=0.147201Jy sigma=1.152714 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147201Jy sigma=1.152714 ! Fit after self-cal, rms=0.147198Jy sigma=1.152714 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.18 mas, bmaj=8.459 mas, bpa=-1.51 degrees ! Estimated noise=2.12733 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000574431 Jy ! Component: 100 - total flux cleaned = 0.000966874 Jy ! Component: 150 - total flux cleaned = 0.00132723 Jy ! Component: 200 - total flux cleaned = 0.00157676 Jy ! Total flux subtracted in 200 components = 0.00157676 Jy ! Clean residual min=-0.009913 max=0.009234 Jy/beam ! Clean residual mean=-0.000361 rms=0.002853 Jy/beam ! Combined flux in latest and established models = 0.29705 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 51 components and 0.29705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146745Jy sigma=1.151115 ! Fit after self-cal, rms=0.146738Jy sigma=1.151100 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146738Jy sigma=1.151100 ! Fit after self-cal, rms=0.135444Jy sigma=1.091905 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020042 Jy ! Component: 100 - total flux cleaned = 0.00217975 Jy ! Component: 150 - total flux cleaned = 0.0022858 Jy ! Component: 200 - total flux cleaned = 0.00238686 Jy ! Total flux subtracted in 200 components = 0.00238686 Jy ! Clean residual min=-0.009236 max=0.009514 Jy/beam ! Clean residual mean=-0.000349 rms=0.002840 Jy/beam ! Combined flux in latest and established models = 0.299436 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 62 components and 0.299436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135311Jy sigma=1.091103 ! Fit after self-cal, rms=0.134296Jy sigma=1.087046 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.18 x 8.459 at -1.51 degrees (North through East) ! Clean map min=-0.0089075 max=0.20393 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134296Jy sigma=1.087046 ! Fit after self-cal, rms=0.136289Jy sigma=1.066547 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136289Jy sigma=1.066547 ! Fit after self-cal, rms=0.136052Jy sigma=1.066086 ! Inverting map and beam ! Estimated beam: bmin=3.178 mas, bmaj=8.466 mas, bpa=-1.373 degrees ! Estimated noise=2.15719 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00374614 Jy ! Component: 100 - total flux cleaned = 0.00446871 Jy ! Component: 150 - total flux cleaned = 0.00451638 Jy ! Component: 200 - total flux cleaned = 0.00451886 Jy ! Total flux subtracted in 200 components = 0.00451886 Jy ! Clean residual min=-0.008660 max=0.008378 Jy/beam ! Clean residual mean=-0.000357 rms=0.002538 Jy/beam ! Combined flux in latest and established models = 0.303955 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 73 components and 0.303955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136119Jy sigma=1.064618 ! Fit after self-cal, rms=0.135993Jy sigma=1.064541 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135993Jy sigma=1.064541 ! Fit after self-cal, rms=0.137755Jy sigma=1.066494 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137755Jy sigma=1.066494 ! Fit after self-cal, rms=0.137721Jy sigma=1.066469 ! Inverting map and beam ! Estimated beam: bmin=3.197 mas, bmaj=8.537 mas, bpa=-1.771 degrees ! Estimated noise=2.17415 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123813 Jy ! Component: 100 - total flux cleaned = 0.00123482 Jy ! Component: 150 - total flux cleaned = 0.00123606 Jy ! Component: 200 - total flux cleaned = 0.0012762 Jy ! Total flux subtracted in 200 components = 0.0012762 Jy ! Clean residual min=-0.008798 max=0.008561 Jy/beam ! Clean residual mean=-0.000338 rms=0.002527 Jy/beam ! Combined flux in latest and established models = 0.305232 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 75 components and 0.305232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137723Jy sigma=1.065887 ! Fit after self-cal, rms=0.137682Jy sigma=1.065874 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.921 mas, bmaj=26.6 mas, bpa=5.765 degrees ! Estimated noise=2.72946 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138842 Jy ! Component: 100 - total flux cleaned = 0.00139631 Jy ! Component: 150 - total flux cleaned = 0.00139604 Jy ! Component: 200 - total flux cleaned = 0.00134325 Jy ! Total flux subtracted in 200 components = 0.00134325 Jy ! Clean residual min=-0.009005 max=0.007918 Jy/beam ! Clean residual mean=-0.000607 rms=0.003247 Jy/beam ! Combined flux in latest and established models = 0.306575 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 75 components and 0.306575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137820Jy sigma=1.066248 ! Fit after self-cal, rms=0.137744Jy sigma=1.066028 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.619 mas, bmaj=6.975 mas, bpa=-3.225 degrees ! Estimated noise=3.02131 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.191114 Jy ! Component: 100 - total flux cleaned = 0.250957 Jy ! Component: 150 - total flux cleaned = 0.278015 Jy ! Component: 200 - total flux cleaned = 0.292188 Jy ! Total flux subtracted in 200 components = 0.292188 Jy ! Clean residual min=-0.012278 max=0.012511 Jy/beam ! Clean residual mean=-0.000254 rms=0.003534 Jy/beam ! Combined flux in latest and established models = 0.292189 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 0.292189 Jy ! Inverting map and beam ! Estimated beam: bmin=3.197 mas, bmaj=8.537 mas, bpa=-1.771 degrees ! Estimated noise=2.17415 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00781903 Jy ! Component: 100 - total flux cleaned = 0.0099192 Jy ! Component: 150 - total flux cleaned = 0.010175 Jy ! Component: 200 - total flux cleaned = 0.0103989 Jy ! Total flux subtracted in 200 components = 0.0103989 Jy ! Clean residual min=-0.008964 max=0.008343 Jy/beam ! Clean residual mean=-0.000339 rms=0.002557 Jy/beam ! Combined flux in latest and established models = 0.302587 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 58 components and 0.302587 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.921 mas, bmaj=26.6 mas, bpa=5.765 degrees ! Estimated noise=2.72946 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00228264 Jy ! Component: 100 - total flux cleaned = 0.00228152 Jy ! Component: 150 - total flux cleaned = 0.00228284 Jy ! Component: 200 - total flux cleaned = 0.00228433 Jy ! Total flux subtracted in 200 components = 0.00228433 Jy ! Clean residual min=-0.009146 max=0.007694 Jy/beam ! Clean residual mean=-0.000605 rms=0.003247 Jy/beam ! Combined flux in latest and established models = 0.304872 Jy ! Adding 4 model components to the UV plane model. ! The established model now contains 60 components and 0.304872 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.197 mas, bmaj=8.537 mas, bpa=-1.771 degrees ! Estimated noise=2.17415 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00124797 Jy ! Component: 100 - total flux cleaned = -0.00138152 Jy ! Component: 150 - total flux cleaned = -0.00127362 Jy ! Component: 200 - total flux cleaned = -0.00122277 Jy ! Total flux subtracted in 200 components = -0.00122277 Jy ! Clean residual min=-0.008961 max=0.008236 Jy/beam ! Clean residual mean=-0.000339 rms=0.002529 Jy/beam ! Combined flux in latest and established models = 0.303649 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 67 components and 0.303649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138120Jy sigma=1.067210 ! Fit after self-cal, rms=0.138090Jy sigma=1.067133 wmodel J0825-3218_S_2004_05_27_yyk\_map.mod ! Writing 67 model components to file: J0825-3218_S_2004_05_27_yyk_map.mod wobs J0825-3218_S_2004_05_27_yyk\_uvs.fits ! Writing UV FITS file: J0825-3218_S_2004_05_27_yyk_uvs.fits wwins J0825-3218_S_2004_05_27_yyk\_map.win ! wwins: Wrote 1 windows to J0825-3218_S_2004_05_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00178285 Jy ! Component: 100 - total flux cleaned = -0.000722932 Jy ! Component: 150 - total flux cleaned = -0.000229835 Jy ! Component: 200 - total flux cleaned = 0.00011859 Jy ! Component: 250 - total flux cleaned = 9.8712e-06 Jy ! Component: 300 - total flux cleaned = 0.000222498 Jy ! Component: 350 - total flux cleaned = 0.000423824 Jy ! Component: 400 - total flux cleaned = 0.000717649 Jy ! Component: 450 - total flux cleaned = 0.00109523 Jy ! Component: 500 - total flux cleaned = 0.00118543 Jy ! Component: 550 - total flux cleaned = 0.00127667 Jy ! Component: 600 - total flux cleaned = 0.00162273 Jy ! Component: 650 - total flux cleaned = 0.00179029 Jy ! Component: 700 - total flux cleaned = 0.00203726 Jy ! Component: 750 - total flux cleaned = 0.00219548 Jy ! Component: 800 - total flux cleaned = 0.0023494 Jy ! Component: 850 - total flux cleaned = 0.00250143 Jy ! Component: 900 - total flux cleaned = 0.00287408 Jy ! Component: 950 - total flux cleaned = 0.00301896 Jy ! Component: 1000 - total flux cleaned = 0.00309062 Jy ! Component: 1050 - total flux cleaned = 0.00337144 Jy ! Component: 1100 - total flux cleaned = 0.00364477 Jy ! Component: 1150 - total flux cleaned = 0.00391191 Jy ! Component: 1200 - total flux cleaned = 0.00410746 Jy ! Component: 1250 - total flux cleaned = 0.00429987 Jy ! Component: 1300 - total flux cleaned = 0.00455262 Jy ! Component: 1350 - total flux cleaned = 0.00473983 Jy ! Component: 1400 - total flux cleaned = 0.00504483 Jy ! Component: 1450 - total flux cleaned = 0.00540272 Jy ! Component: 1500 - total flux cleaned = 0.0056373 Jy ! Component: 1550 - total flux cleaned = 0.0059258 Jy ! Component: 1600 - total flux cleaned = 0.0062657 Jy ! Component: 1650 - total flux cleaned = 0.00648794 Jy ! Component: 1700 - total flux cleaned = 0.00676188 Jy ! Component: 1750 - total flux cleaned = 0.00681536 Jy ! Component: 1800 - total flux cleaned = 0.00670855 Jy ! Component: 1850 - total flux cleaned = 0.00670876 Jy ! Component: 1900 - total flux cleaned = 0.00665728 Jy ! Component: 1950 - total flux cleaned = 0.00670824 Jy ! Component: 2000 - total flux cleaned = 0.00655705 Jy ! Total flux subtracted in 2048 components = 0.00665604 Jy ! Clean residual min=-0.002787 max=0.002928 Jy/beam ! Clean residual mean=-0.000139 rms=0.001031 Jy/beam ! Combined flux in latest and established models = 0.310305 Jy keep ! Adding 138 model components to the UV plane model. ! The established model now contains 205 components and 0.310305 Jy ![Exited script file: muppet] wmap "J0825-3218_S_2004_05_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.197 x 8.537 at -1.771 degrees (North through East) ! Clean map min=-0.0049264 max=0.21063 Jy/beam ! Writing clean map to FITS file: J0825-3218_S_2004_05_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.210634 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00103538 device "J0825-3218_S_2004_05_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J0825-3218_S_2004_05_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.47467 1.47467 2.94933 5.89866 11.7973 23.5947 47.1893 94.3786 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0031 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.21 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.197 x 8.537 at -1.771 degrees (North through East) ! Clean map min=-0.0049264 max=0.21063 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0825-3218_S_2004_05_27_yyk\_map.gif/gif" ! Attempting to open device: 'J0825-3218_S_2004_05_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0825-3218_S_2004_05_27_yyk_uvs.log closed on Wed Dec 7 00:11:01 2005