! Started logfile: J0801-3336_S_2004_04_30_yyk_uvs.log on Wed Dec 7 00:09:28 2005 obs J0801-3336_S_2004_04_30_yyk_uve.fits ! Reading UV FITS file: J0801-3336_S_2004_04_30_yyk_uve.fits ! AN table 1: 7 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.650794 visibilities/baseline/integration-bin. ! Found source: J0801-3336 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1628 lines of history. ! ! Reading 820 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0801-3336_S_2004_04_30_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.156159 Jy startmod ,phase_soltime ! Applying default point source starting model. ! Performing phase self-cal over 10 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.875814Jy sigma=13.917762 ! Fit after self-cal, rms=0.875336Jy sigma=13.911069 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.033 mas, bmaj=22.67 mas, bpa=18.55 degrees ! Estimated noise=2.51874 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.104774 Jy ! Component: 100 - total flux cleaned = 0.129878 Jy ! Total flux subtracted in 100 components = 0.129878 Jy ! Clean residual min=-0.009353 max=0.009400 Jy/beam ! Clean residual mean=-0.000140 rms=0.003079 Jy/beam ! Combined flux in latest and established models = 0.129878 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.129878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085733Jy sigma=1.127482 ! Fit after self-cal, rms=0.085821Jy sigma=1.127104 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.738 mas, bmaj=24.9 mas, bpa=16.51 degrees ! Estimated noise=1.79719 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0155002 Jy ! Component: 100 - total flux cleaned = 0.0232839 Jy ! Component: 150 - total flux cleaned = 0.0280268 Jy ! Component: 200 - total flux cleaned = 0.0309786 Jy ! Total flux subtracted in 200 components = 0.0309786 Jy ! Clean residual min=-0.006916 max=0.006592 Jy/beam ! Clean residual mean=-0.000161 rms=0.002357 Jy/beam ! Combined flux in latest and established models = 0.160857 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 53 components and 0.160857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084158Jy sigma=1.087125 ! Fit after self-cal, rms=0.084138Jy sigma=1.086805 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! selflims ampcor_selflim ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.0009 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 1.00* KP 0.94 ! LA 1.08 MK 1.00* NL 1.02 OV 0.97 ! PT 1.04 SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00695 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.93 HN 1.00* KP 0.95 ! LA 1.07 MK 1.00* NL 0.95 OV 0.99 ! PT 1.00 SC 1.06 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.084138Jy sigma=1.086805 ! Fit after self-cal, rms=0.083679Jy sigma=1.081046 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083679Jy sigma=1.081046 ! Fit after self-cal, rms=0.083689Jy sigma=1.081046 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.804 mas, bmaj=24.83 mas, bpa=16.34 degrees ! Estimated noise=1.78952 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130094 Jy ! Component: 100 - total flux cleaned = 0.00163789 Jy ! Component: 150 - total flux cleaned = 0.00194878 Jy ! Component: 200 - total flux cleaned = 0.00223903 Jy ! Total flux subtracted in 200 components = 0.00223903 Jy ! Clean residual min=-0.006196 max=0.006672 Jy/beam ! Clean residual mean=-0.000016 rms=0.002115 Jy/beam ! Combined flux in latest and established models = 0.163096 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 66 components and 0.163096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083595Jy sigma=1.078722 ! Fit after self-cal, rms=0.083575Jy sigma=1.078566 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083575Jy sigma=1.078566 ! Fit after self-cal, rms=0.069730Jy sigma=0.964657 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0022907 Jy ! Component: 100 - total flux cleaned = 0.0029706 Jy ! Component: 150 - total flux cleaned = 0.00343633 Jy ! Component: 200 - total flux cleaned = 0.00361037 Jy ! Total flux subtracted in 200 components = 0.00361037 Jy ! Clean residual min=-0.005394 max=0.006255 Jy/beam ! Clean residual mean=-0.000019 rms=0.001901 Jy/beam ! Combined flux in latest and established models = 0.166706 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 95 components and 0.166706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069421Jy sigma=0.961904 ! Fit after self-cal, rms=0.067195Jy sigma=0.947398 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.804 x 24.83 at 16.34 degrees (North through East) ! Clean map min=-0.0053508 max=0.12768 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067195Jy sigma=0.947398 ! Fit after self-cal, rms=0.066392Jy sigma=0.946242 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066392Jy sigma=0.946242 ! Fit after self-cal, rms=0.066052Jy sigma=0.944171 ! Inverting map and beam ! Estimated beam: bmin=4.808 mas, bmaj=24.78 mas, bpa=16.32 degrees ! Estimated noise=1.77483 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000433865 Jy ! Component: 100 - total flux cleaned = 0.000431466 Jy ! Component: 150 - total flux cleaned = 0.000596327 Jy ! Component: 200 - total flux cleaned = 0.000752806 Jy ! Total flux subtracted in 200 components = 0.000752806 Jy ! Clean residual min=-0.005405 max=0.006167 Jy/beam ! Clean residual mean=0.000001 rms=0.001904 Jy/beam ! Combined flux in latest and established models = 0.167459 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 111 components and 0.167459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066035Jy sigma=0.942828 ! Fit after self-cal, rms=0.065966Jy sigma=0.942341 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065966Jy sigma=0.942341 ! Fit after self-cal, rms=0.064828Jy sigma=0.932044 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064828Jy sigma=0.932044 ! Fit after self-cal, rms=0.064840Jy sigma=0.931661 ! Inverting map and beam ! Estimated beam: bmin=4.63 mas, bmaj=24.32 mas, bpa=16.52 degrees ! Estimated noise=1.75764 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134655 Jy ! Component: 100 - total flux cleaned = 0.00164946 Jy ! Component: 150 - total flux cleaned = 0.00190094 Jy ! Component: 200 - total flux cleaned = 0.00201022 Jy ! Total flux subtracted in 200 components = 0.00201022 Jy ! Clean residual min=-0.005566 max=0.005898 Jy/beam ! Clean residual mean=-0.000033 rms=0.001804 Jy/beam ! Combined flux in latest and established models = 0.169469 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 133 components and 0.169469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064720Jy sigma=0.929601 ! Fit after self-cal, rms=0.064721Jy sigma=0.929495 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.01 mas, bmaj=34.5 mas, bpa=3.677 degrees ! Estimated noise=1.92995 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000407813 Jy ! Component: 100 - total flux cleaned = -0.000243344 Jy ! Component: 150 - total flux cleaned = -0.000145866 Jy ! Component: 200 - total flux cleaned = -2.48225e-05 Jy ! Total flux subtracted in 200 components = -2.48225e-05 Jy ! Clean residual min=-0.005644 max=0.006251 Jy/beam ! Clean residual mean=-0.000053 rms=0.002010 Jy/beam ! Combined flux in latest and established models = 0.169444 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 147 components and 0.169444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064721Jy sigma=0.929273 ! Fit after self-cal, rms=0.064709Jy sigma=0.929104 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.013 mas, bmaj=22.46 mas, bpa=18.56 degrees ! Estimated noise=2.43471 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.106072 Jy ! Component: 100 - total flux cleaned = 0.13267 Jy ! Component: 150 - total flux cleaned = 0.145741 Jy ! Component: 200 - total flux cleaned = 0.153751 Jy ! Total flux subtracted in 200 components = 0.153751 Jy ! Clean residual min=-0.007577 max=0.006765 Jy/beam ! Clean residual mean=-0.000033 rms=0.002285 Jy/beam ! Combined flux in latest and established models = 0.153751 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.153751 Jy ! Inverting map and beam ! Estimated beam: bmin=4.63 mas, bmaj=24.32 mas, bpa=16.52 degrees ! Estimated noise=1.75764 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00641716 Jy ! Component: 100 - total flux cleaned = 0.0102036 Jy ! Component: 150 - total flux cleaned = 0.0122556 Jy ! Component: 200 - total flux cleaned = 0.0127439 Jy ! Total flux subtracted in 200 components = 0.0127439 Jy ! Clean residual min=-0.006148 max=0.006104 Jy/beam ! Clean residual mean=-0.000025 rms=0.001940 Jy/beam ! Combined flux in latest and established models = 0.166495 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 64 components and 0.166495 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.01 mas, bmaj=34.5 mas, bpa=3.677 degrees ! Estimated noise=1.92995 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000570833 Jy ! Component: 100 - total flux cleaned = 0.000851663 Jy ! Component: 150 - total flux cleaned = 0.00104213 Jy ! Component: 200 - total flux cleaned = 0.00122094 Jy ! Total flux subtracted in 200 components = 0.00122094 Jy ! Clean residual min=-0.006277 max=0.006474 Jy/beam ! Clean residual mean=-0.000038 rms=0.002090 Jy/beam ! Combined flux in latest and established models = 0.167716 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 77 components and 0.167716 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.63 mas, bmaj=24.32 mas, bpa=16.52 degrees ! Estimated noise=1.75764 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000286466 Jy ! Component: 100 - total flux cleaned = 0.00068138 Jy ! Component: 150 - total flux cleaned = 0.000986399 Jy ! Component: 200 - total flux cleaned = 0.00115938 Jy ! Total flux subtracted in 200 components = 0.00115938 Jy ! Clean residual min=-0.005710 max=0.005745 Jy/beam ! Clean residual mean=-0.000030 rms=0.001860 Jy/beam ! Combined flux in latest and established models = 0.168875 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 94 components and 0.168875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064784Jy sigma=0.931838 ! Fit after self-cal, rms=0.064753Jy sigma=0.931632 wmodel J0801-3336_S_2004_04_30_yyk\_map.mod ! Writing 94 model components to file: J0801-3336_S_2004_04_30_yyk_map.mod wobs J0801-3336_S_2004_04_30_yyk\_uvs.fits ! Writing UV FITS file: J0801-3336_S_2004_04_30_yyk_uvs.fits wwins J0801-3336_S_2004_04_30_yyk\_map.win ! wwins: Wrote 1 windows to J0801-3336_S_2004_04_30_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000196136 Jy ! Component: 100 - total flux cleaned = -0.000189513 Jy ! Component: 150 - total flux cleaned = -0.000439495 Jy ! Component: 200 - total flux cleaned = -0.000905141 Jy ! Component: 250 - total flux cleaned = -0.00133253 Jy ! Component: 300 - total flux cleaned = -0.00179677 Jy ! Component: 350 - total flux cleaned = -0.00228883 Jy ! Component: 400 - total flux cleaned = -0.00269143 Jy ! Component: 450 - total flux cleaned = -0.00301702 Jy ! Component: 500 - total flux cleaned = -0.00342395 Jy ! Component: 550 - total flux cleaned = -0.00381509 Jy ! Component: 600 - total flux cleaned = -0.00409723 Jy ! Component: 650 - total flux cleaned = -0.00436886 Jy ! Component: 700 - total flux cleaned = -0.00463168 Jy ! Component: 750 - total flux cleaned = -0.00484363 Jy ! Component: 800 - total flux cleaned = -0.00504921 Jy ! Component: 850 - total flux cleaned = -0.00529002 Jy ! Component: 900 - total flux cleaned = -0.00556393 Jy ! Component: 950 - total flux cleaned = -0.00575513 Jy ! Component: 1000 - total flux cleaned = -0.00582891 Jy ! Component: 1050 - total flux cleaned = -0.00586528 Jy ! Component: 1100 - total flux cleaned = -0.0059008 Jy ! Component: 1150 - total flux cleaned = -0.00597103 Jy ! Component: 1200 - total flux cleaned = -0.00610934 Jy ! Component: 1250 - total flux cleaned = -0.00624549 Jy ! Component: 1300 - total flux cleaned = -0.00634561 Jy ! Component: 1350 - total flux cleaned = -0.00634543 Jy ! Component: 1400 - total flux cleaned = -0.0063783 Jy ! Component: 1450 - total flux cleaned = -0.00644256 Jy ! Component: 1500 - total flux cleaned = -0.00644261 Jy ! Component: 1550 - total flux cleaned = -0.00650505 Jy ! Component: 1600 - total flux cleaned = -0.00659639 Jy ! Component: 1650 - total flux cleaned = -0.0065662 Jy ! Component: 1700 - total flux cleaned = -0.00665592 Jy ! Component: 1750 - total flux cleaned = -0.00671467 Jy ! Component: 1800 - total flux cleaned = -0.00668603 Jy ! Component: 1850 - total flux cleaned = -0.00680094 Jy ! Component: 1900 - total flux cleaned = -0.00682906 Jy ! Component: 1950 - total flux cleaned = -0.00685687 Jy ! Component: 2000 - total flux cleaned = -0.00691183 Jy ! Total flux subtracted in 2048 components = -0.00693857 Jy ! Clean residual min=-0.001902 max=0.001730 Jy/beam ! Clean residual mean=-0.000032 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.161936 Jy keep ! Adding 141 model components to the UV plane model. ! The established model now contains 235 components and 0.161936 Jy ![Exited script file: muppet] wmap "J0801-3336_S_2004_04_30_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.63 x 24.32 at 16.52 degrees (North through East) ! Clean map min=-0.0048526 max=0.12386 Jy/beam ! Writing clean map to FITS file: J0801-3336_S_2004_04_30_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.123859 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000579652 device "J0801-3336_S_2004_04_30_yyk\_map.eps/VPS" ! Attempting to open device: 'J0801-3336_S_2004_04_30_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.40398 1.40398 2.80796 5.61592 11.2318 22.4637 44.9274 89.8548 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.123 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.63 x 24.32 at 16.52 degrees (North through East) ! Clean map min=-0.0048526 max=0.12386 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0801-3336_S_2004_04_30_yyk\_map.gif/gif" ! Attempting to open device: 'J0801-3336_S_2004_04_30_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0801-3336_S_2004_04_30_yyk_uvs.log closed on Wed Dec 7 00:09:32 2005